New comer
#1
Guest
Posts: n/a
New comer
Hi guys,
just got a 97 wrangler -
I want to intall a dome light strapped on the roll bar - which way is
the best? how should I connect it? should I use a switch?
obviously do not know much, so I am in desperate need for advice!!
cheers,
Dimitris
just got a 97 wrangler -
I want to intall a dome light strapped on the roll bar - which way is
the best? how should I connect it? should I use a switch?
obviously do not know much, so I am in desperate need for advice!!
cheers,
Dimitris
#8
Guest
Posts: n/a
Re: New comer
Wire it to the existing interior light, that works off the door and tailgate
switches. Find a good ground, and then run two wires under the roll bar
padding to the center. Poke a small hole for the two wires, connect them to
a dome light or clear running light of a suitable size, and tie strap it in
place. If you do this carefully and with some forethought to appearance
issues, it should come out looking great. Don't forget to allow for
ultimate bulb replacement. That is, don't tie strap the lens to the light.
Earle
<d_darlac@yahoo.com> wrote in message
news:1133109676.176522.159520@g14g2000cwa.googlegr oups.com...
> Hi guys,
> just got a 97 wrangler -
> I want to intall a dome light strapped on the roll bar - which way is
> the best? how should I connect it? should I use a switch?
> obviously do not know much, so I am in desperate need for advice!!
>
> cheers,
> Dimitris
>
switches. Find a good ground, and then run two wires under the roll bar
padding to the center. Poke a small hole for the two wires, connect them to
a dome light or clear running light of a suitable size, and tie strap it in
place. If you do this carefully and with some forethought to appearance
issues, it should come out looking great. Don't forget to allow for
ultimate bulb replacement. That is, don't tie strap the lens to the light.
Earle
<d_darlac@yahoo.com> wrote in message
news:1133109676.176522.159520@g14g2000cwa.googlegr oups.com...
> Hi guys,
> just got a 97 wrangler -
> I want to intall a dome light strapped on the roll bar - which way is
> the best? how should I connect it? should I use a switch?
> obviously do not know much, so I am in desperate need for advice!!
>
> cheers,
> Dimitris
>
#9
Guest
Posts: n/a
Re: New comer
Wire it to the existing interior light, that works off the door and tailgate
switches. Find a good ground, and then run two wires under the roll bar
padding to the center. Poke a small hole for the two wires, connect them to
a dome light or clear running light of a suitable size, and tie strap it in
place. If you do this carefully and with some forethought to appearance
issues, it should come out looking great. Don't forget to allow for
ultimate bulb replacement. That is, don't tie strap the lens to the light.
Earle
<d_darlac@yahoo.com> wrote in message
news:1133109676.176522.159520@g14g2000cwa.googlegr oups.com...
> Hi guys,
> just got a 97 wrangler -
> I want to intall a dome light strapped on the roll bar - which way is
> the best? how should I connect it? should I use a switch?
> obviously do not know much, so I am in desperate need for advice!!
>
> cheers,
> Dimitris
>
switches. Find a good ground, and then run two wires under the roll bar
padding to the center. Poke a small hole for the two wires, connect them to
a dome light or clear running light of a suitable size, and tie strap it in
place. If you do this carefully and with some forethought to appearance
issues, it should come out looking great. Don't forget to allow for
ultimate bulb replacement. That is, don't tie strap the lens to the light.
Earle
<d_darlac@yahoo.com> wrote in message
news:1133109676.176522.159520@g14g2000cwa.googlegr oups.com...
> Hi guys,
> just got a 97 wrangler -
> I want to intall a dome light strapped on the roll bar - which way is
> the best? how should I connect it? should I use a switch?
> obviously do not know much, so I am in desperate need for advice!!
>
> cheers,
> Dimitris
>
#10
Guest
Posts: n/a
Re: New comer
Wire it to the existing interior light, that works off the door and tailgate
switches. Find a good ground, and then run two wires under the roll bar
padding to the center. Poke a small hole for the two wires, connect them to
a dome light or clear running light of a suitable size, and tie strap it in
place. If you do this carefully and with some forethought to appearance
issues, it should come out looking great. Don't forget to allow for
ultimate bulb replacement. That is, don't tie strap the lens to the light.
Earle
<d_darlac@yahoo.com> wrote in message
news:1133109676.176522.159520@g14g2000cwa.googlegr oups.com...
> Hi guys,
> just got a 97 wrangler -
> I want to intall a dome light strapped on the roll bar - which way is
> the best? how should I connect it? should I use a switch?
> obviously do not know much, so I am in desperate need for advice!!
>
> cheers,
> Dimitris
>
switches. Find a good ground, and then run two wires under the roll bar
padding to the center. Poke a small hole for the two wires, connect them to
a dome light or clear running light of a suitable size, and tie strap it in
place. If you do this carefully and with some forethought to appearance
issues, it should come out looking great. Don't forget to allow for
ultimate bulb replacement. That is, don't tie strap the lens to the light.
Earle
<d_darlac@yahoo.com> wrote in message
news:1133109676.176522.159520@g14g2000cwa.googlegr oups.com...
> Hi guys,
> just got a 97 wrangler -
> I want to intall a dome light strapped on the roll bar - which way is
> the best? how should I connect it? should I use a switch?
> obviously do not know much, so I am in desperate need for advice!!
>
> cheers,
> Dimitris
>