Need help recharging the AC on a 97 Jeep Cherokee Sport
Guest
Posts: n/a
speaking of AC recharging
I have a '98 TJ Sport with factory AC.
I picked up an R134a recharging kit the other night because my AC was
blowing warm air on our beautiful 90 degree days!
I followed the directions to the letter but the system still didn't get
cool. The compressor was kicking in as it should be(based on a butt-load
of past postings I read about the subject here).
The tubing leading into the firewall just got a little cool, it didn't get
cold. I'm afraid to add more refrigerant because I don't want to have too
much pressure in the system. The refill package I bought doesn't have
numeric pressure gauge, it just has the low/good/toomuch colors..
I'm no professional mechanic, so are there some basic troubleshooting things
I could try here?
Thanks,
Tim
I picked up an R134a recharging kit the other night because my AC was
blowing warm air on our beautiful 90 degree days!
I followed the directions to the letter but the system still didn't get
cool. The compressor was kicking in as it should be(based on a butt-load
of past postings I read about the subject here).
The tubing leading into the firewall just got a little cool, it didn't get
cold. I'm afraid to add more refrigerant because I don't want to have too
much pressure in the system. The refill package I bought doesn't have
numeric pressure gauge, it just has the low/good/toomuch colors..
I'm no professional mechanic, so are there some basic troubleshooting things
I could try here?
Thanks,
Tim
Guest
Posts: n/a
speaking of AC recharging
I have a '98 TJ Sport with factory AC.
I picked up an R134a recharging kit the other night because my AC was
blowing warm air on our beautiful 90 degree days!
I followed the directions to the letter but the system still didn't get
cool. The compressor was kicking in as it should be(based on a butt-load
of past postings I read about the subject here).
The tubing leading into the firewall just got a little cool, it didn't get
cold. I'm afraid to add more refrigerant because I don't want to have too
much pressure in the system. The refill package I bought doesn't have
numeric pressure gauge, it just has the low/good/toomuch colors..
I'm no professional mechanic, so are there some basic troubleshooting things
I could try here?
Thanks,
Tim
I picked up an R134a recharging kit the other night because my AC was
blowing warm air on our beautiful 90 degree days!
I followed the directions to the letter but the system still didn't get
cool. The compressor was kicking in as it should be(based on a butt-load
of past postings I read about the subject here).
The tubing leading into the firewall just got a little cool, it didn't get
cold. I'm afraid to add more refrigerant because I don't want to have too
much pressure in the system. The refill package I bought doesn't have
numeric pressure gauge, it just has the low/good/toomuch colors..
I'm no professional mechanic, so are there some basic troubleshooting things
I could try here?
Thanks,
Tim
Guest
Posts: n/a
speaking of AC recharging
I have a '98 TJ Sport with factory AC.
I picked up an R134a recharging kit the other night because my AC was
blowing warm air on our beautiful 90 degree days!
I followed the directions to the letter but the system still didn't get
cool. The compressor was kicking in as it should be(based on a butt-load
of past postings I read about the subject here).
The tubing leading into the firewall just got a little cool, it didn't get
cold. I'm afraid to add more refrigerant because I don't want to have too
much pressure in the system. The refill package I bought doesn't have
numeric pressure gauge, it just has the low/good/toomuch colors..
I'm no professional mechanic, so are there some basic troubleshooting things
I could try here?
Thanks,
Tim
I picked up an R134a recharging kit the other night because my AC was
blowing warm air on our beautiful 90 degree days!
I followed the directions to the letter but the system still didn't get
cool. The compressor was kicking in as it should be(based on a butt-load
of past postings I read about the subject here).
The tubing leading into the firewall just got a little cool, it didn't get
cold. I'm afraid to add more refrigerant because I don't want to have too
much pressure in the system. The refill package I bought doesn't have
numeric pressure gauge, it just has the low/good/toomuch colors..
I'm no professional mechanic, so are there some basic troubleshooting things
I could try here?
Thanks,
Tim
Guest
Posts: n/a
Re: Need help recharging the AC on a 97 Jeep Cherokee Sport
If you use a heat gun on the charging cylinder you can, I prefer doing it
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Need help recharging the AC on a 97 Jeep Cherokee Sport
If you use a heat gun on the charging cylinder you can, I prefer doing it
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Need help recharging the AC on a 97 Jeep Cherokee Sport
If you use a heat gun on the charging cylinder you can, I prefer doing it
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Need help recharging the AC on a 97 Jeep Cherokee Sport
If you use a heat gun on the charging cylinder you can, I prefer doing it
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
that way to get the exact OEM recharge. Once the system is filled then I
run the compressor I have never had a problem and it takes no longer to fill
an auto ac system a 400 ton chiller is a different story. Also another
trick is leaving the system in a vacuum and draw in the refrigerant.
Coasty
"Robb S via CarKB.com" <forum@CarKB.com> wrote in message
news:52D999FB4D162@CarKB.com...
>I have NEVER been able to recharge a system completely without the
>compressor
> running.........and Bill is right, the compressor is off via the low
> pressure
> switch, until some gas is introduced, and brings the pressure up, then the
> compressor aids in pulling the refrigerant into the system via the
> suctions
> side of the compressor. And, I would NEVER add any extra oil to the
> system
> on a recharge, unless you KNEW you lost a significant amount of oil.....
> You'll end up slugging your compressor with liquid oil.....
>
> L.W.(ßill) ------ III wrote:
>> The system is automatically off via the low pressures switch.
>> God Bless America, ßill O|||||||O
>>mailto:-------------------- http://www.----------.com/
>>
>>> Not a good method to use! Each manufacturer has a specific amount of
>>> refrigerant they require to be installed by weight. You do this with
>>> the
>>[quoted text clipped - 5 lines]
>>> vacuum to get all the bad stuff out and re introduce the correct amount
>>> of
>>> compressor oil.
>
>
> --
> Message posted via http://www.carkb.com
Guest
Posts: n/a
Re: Need help recharging the AC on a 97 Jeep Cherokee Sport
why not run the compressor and still weigh in the charge??????? Do that on
almost every system I charge...
Coasty wrote:
>If you use a heat gun on the charging cylinder you can, I prefer doing it
>that way to get the exact OEM recharge. Once the system is filled then I
>run the compressor I have never had a problem and it takes no longer to fill
>an auto ac system a 400 ton chiller is a different story. Also another
>trick is leaving the system in a vacuum and draw in the refrigerant.
>Coasty
>
>>I have NEVER been able to recharge a system completely without the
>>compressor
>[quoted text clipped - 19 lines]
>>>> of
>>>> compressor oil.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200508/1
almost every system I charge...
Coasty wrote:
>If you use a heat gun on the charging cylinder you can, I prefer doing it
>that way to get the exact OEM recharge. Once the system is filled then I
>run the compressor I have never had a problem and it takes no longer to fill
>an auto ac system a 400 ton chiller is a different story. Also another
>trick is leaving the system in a vacuum and draw in the refrigerant.
>Coasty
>
>>I have NEVER been able to recharge a system completely without the
>>compressor
>[quoted text clipped - 19 lines]
>>>> of
>>>> compressor oil.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200508/1
Guest
Posts: n/a
Re: Need help recharging the AC on a 97 Jeep Cherokee Sport
why not run the compressor and still weigh in the charge??????? Do that on
almost every system I charge...
Coasty wrote:
>If you use a heat gun on the charging cylinder you can, I prefer doing it
>that way to get the exact OEM recharge. Once the system is filled then I
>run the compressor I have never had a problem and it takes no longer to fill
>an auto ac system a 400 ton chiller is a different story. Also another
>trick is leaving the system in a vacuum and draw in the refrigerant.
>Coasty
>
>>I have NEVER been able to recharge a system completely without the
>>compressor
>[quoted text clipped - 19 lines]
>>>> of
>>>> compressor oil.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200508/1
almost every system I charge...
Coasty wrote:
>If you use a heat gun on the charging cylinder you can, I prefer doing it
>that way to get the exact OEM recharge. Once the system is filled then I
>run the compressor I have never had a problem and it takes no longer to fill
>an auto ac system a 400 ton chiller is a different story. Also another
>trick is leaving the system in a vacuum and draw in the refrigerant.
>Coasty
>
>>I have NEVER been able to recharge a system completely without the
>>compressor
>[quoted text clipped - 19 lines]
>>>> of
>>>> compressor oil.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200508/1
Guest
Posts: n/a
Re: Need help recharging the AC on a 97 Jeep Cherokee Sport
why not run the compressor and still weigh in the charge??????? Do that on
almost every system I charge...
Coasty wrote:
>If you use a heat gun on the charging cylinder you can, I prefer doing it
>that way to get the exact OEM recharge. Once the system is filled then I
>run the compressor I have never had a problem and it takes no longer to fill
>an auto ac system a 400 ton chiller is a different story. Also another
>trick is leaving the system in a vacuum and draw in the refrigerant.
>Coasty
>
>>I have NEVER been able to recharge a system completely without the
>>compressor
>[quoted text clipped - 19 lines]
>>>> of
>>>> compressor oil.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200508/1
almost every system I charge...
Coasty wrote:
>If you use a heat gun on the charging cylinder you can, I prefer doing it
>that way to get the exact OEM recharge. Once the system is filled then I
>run the compressor I have never had a problem and it takes no longer to fill
>an auto ac system a 400 ton chiller is a different story. Also another
>trick is leaving the system in a vacuum and draw in the refrigerant.
>Coasty
>
>>I have NEVER been able to recharge a system completely without the
>>compressor
>[quoted text clipped - 19 lines]
>>>> of
>>>> compressor oil.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200508/1
