If the mounting brackets and tabs are still sound you can take it over to
your corner welding shop and have Elmer just weld another 3/16 inch (or
heavier) piece of traction plate over the existing one.

If the mounts have advanced body cancer Elmer can use the old one as a
template for repair.

Before you re-install it give it a good coating of rust inhibiting paint.
The best source for advise and materials is a real paint shop, not the paint
department at Home Depot or Lowes. Tell the guy what you intend the paint
for and he will get you the right stuff and you might be surprised how
affordable it is.

I went to Cincinnati Color yesterday to ask about painting aluminum running
boards and got advise from the "new" guy. (He has only been there 12 years)
He told me how to do the preparation and the materials would be $6.95/quart
and they would custom tint the color to match the body cladding or the body
paint at no charge.

FWIW they recommended Kentucky Coatings Rust-Nox II (direct to metal)



"Dereck L. Dietz" <dietzdl@ameritech.net> wrote in message
news:d9TDe.1698$lX2.239@newssvr19.news.prodigy.com ...
>I have a 1992 Jeep Wrangler with a 15-gallon gas tank. I've had the jeep
>in
> a garage due to a leaking fuel line and they also told me my Fuel Tank
> Skid
> Plate needs replacing as it's rusting through but they cannot find a
> replacement and have been told that part is no longer made.
>
> I even tried calling up Quadratec since their Spring 2005 catalog had what
> I
> needed but even they told me the part was discontinued.
>
> Does anybody know where I could check to possibly locate what I need?
>
>

 

Don't know where they are looking for that skid plate, but I phoned my
local chrysler dealer, he didn't have one but phoned another dealer for me,
in stock on the shelf, and this was for an 81 CJ7. $ 150.00 Canadian, about
$115.00 US last year.

"Dereck L. Dietz" <dietzdl@ameritech.net> wrote in message
news:d9TDe.1698$lX2.239@newssvr19.news.prodigy.com ...
>I have a 1992 Jeep Wrangler with a 15-gallon gas tank. I've had the jeep
>in
> a garage due to a leaking fuel line and they also told me my Fuel Tank
> Skid
> Plate needs replacing as it's rusting through but they cannot find a
> replacement and have been told that part is no longer made.
>
> I even tried calling up Quadratec since their Spring 2005 catalog had what
> I
> needed but even they told me the part was discontinued.
>
> Does anybody know where I could check to possibly locate what I need?
>
>

 

Don't know where they are looking for that skid plate, but I phoned my
local chrysler dealer, he didn't have one but phoned another dealer for me,
in stock on the shelf, and this was for an 81 CJ7. $ 150.00 Canadian, about
$115.00 US last year.

"Dereck L. Dietz" <dietzdl@ameritech.net> wrote in message
news:d9TDe.1698$lX2.239@newssvr19.news.prodigy.com ...
>I have a 1992 Jeep Wrangler with a 15-gallon gas tank. I've had the jeep
>in
> a garage due to a leaking fuel line and they also told me my Fuel Tank
> Skid
> Plate needs replacing as it's rusting through but they cannot find a
> replacement and have been told that part is no longer made.
>
> I even tried calling up Quadratec since their Spring 2005 catalog had what
> I
> needed but even they told me the part was discontinued.
>
> Does anybody know where I could check to possibly locate what I need?
>
>

 

Don't know where they are looking for that skid plate, but I phoned my
local chrysler dealer, he didn't have one but phoned another dealer for me,
in stock on the shelf, and this was for an 81 CJ7. $ 150.00 Canadian, about
$115.00 US last year.

"Dereck L. Dietz" <dietzdl@ameritech.net> wrote in message
news:d9TDe.1698$lX2.239@newssvr19.news.prodigy.com ...
>I have a 1992 Jeep Wrangler with a 15-gallon gas tank. I've had the jeep
>in
> a garage due to a leaking fuel line and they also told me my Fuel Tank
> Skid
> Plate needs replacing as it's rusting through but they cannot find a
> replacement and have been told that part is no longer made.
>
> I even tried calling up Quadratec since their Spring 2005 catalog had what
> I
> needed but even they told me the part was discontinued.
>
> Does anybody know where I could check to possibly locate what I need?
>
>

 

Don't know where they are looking for that skid plate, but I phoned my
local chrysler dealer, he didn't have one but phoned another dealer for me,
in stock on the shelf, and this was for an 81 CJ7. $ 150.00 Canadian, about
$115.00 US last year.

"Dereck L. Dietz" <dietzdl@ameritech.net> wrote in message
news:d9TDe.1698$lX2.239@newssvr19.news.prodigy.com ...
>I have a 1992 Jeep Wrangler with a 15-gallon gas tank. I've had the jeep
>in
> a garage due to a leaking fuel line and they also told me my Fuel Tank
> Skid
> Plate needs replacing as it's rusting through but they cannot find a
> replacement and have been told that part is no longer made.
>
> I even tried calling up Quadratec since their Spring 2005 catalog had what
> I
> needed but even they told me the part was discontinued.
>
> Does anybody know where I could check to possibly locate what I need?
>
>