Re: need help about throttle body install.
http://www.penguinmagic.com/images/p...dium/5029a.jpg
God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ "Edwin J. Fowler" wrote: > > Hello everybody! > > I just realized that the net might help me answer a question. > > I recently purchased a throttle body spacer for my '94 Jeep Wrangle, 2.5L 4 > cylinder, and have noticed that from a stop, when accelerating at a moderate > level, (not too fast), the engine's RPM goes from 1st to 2nd, but then back > to 1st for about a split second, then back to second, and eventually to 3rd. > This is an automatic by the way. > > It also seems that the RPM's in second are maintained at about 2K as speed > increases. Not that that is a bad thing, but they don't raise. > > Is there any adjustments that should be made when installing a 1" spacer? > There were none in the instructions. There wasn't even an arrow indicating > which way the spacer should go. > > Thanks for any replies. > > ejf |
Re: need help about throttle body install.
http://www.penguinmagic.com/images/p...dium/5029a.jpg
God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ "Edwin J. Fowler" wrote: > > Hello everybody! > > I just realized that the net might help me answer a question. > > I recently purchased a throttle body spacer for my '94 Jeep Wrangle, 2.5L 4 > cylinder, and have noticed that from a stop, when accelerating at a moderate > level, (not too fast), the engine's RPM goes from 1st to 2nd, but then back > to 1st for about a split second, then back to second, and eventually to 3rd. > This is an automatic by the way. > > It also seems that the RPM's in second are maintained at about 2K as speed > increases. Not that that is a bad thing, but they don't raise. > > Is there any adjustments that should be made when installing a 1" spacer? > There were none in the instructions. There wasn't even an arrow indicating > which way the spacer should go. > > Thanks for any replies. > > ejf |
Re: need help about throttle body install.
http://www.penguinmagic.com/images/p...dium/5029a.jpg
God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ "Edwin J. Fowler" wrote: > > Hello everybody! > > I just realized that the net might help me answer a question. > > I recently purchased a throttle body spacer for my '94 Jeep Wrangle, 2.5L 4 > cylinder, and have noticed that from a stop, when accelerating at a moderate > level, (not too fast), the engine's RPM goes from 1st to 2nd, but then back > to 1st for about a split second, then back to second, and eventually to 3rd. > This is an automatic by the way. > > It also seems that the RPM's in second are maintained at about 2K as speed > increases. Not that that is a bad thing, but they don't raise. > > Is there any adjustments that should be made when installing a 1" spacer? > There were none in the instructions. There wasn't even an arrow indicating > which way the spacer should go. > > Thanks for any replies. > > ejf |
Re: need help about throttle body install.
What about this???
http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm "Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com... > Hello everybody! > > I just realized that the net might help me answer a question. |
Re: need help about throttle body install.
What about this???
http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm "Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com... > Hello everybody! > > I just realized that the net might help me answer a question. |
Re: need help about throttle body install.
What about this???
http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm "Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com... > Hello everybody! > > I just realized that the net might help me answer a question. |
Re: need help about throttle body install.
What about this???
http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm "Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com... > Hello everybody! > > I just realized that the net might help me answer a question. |
Re: need help about throttle body install.
They probably lost some power due to turbulence. They didn't change
the only restriction, the butterfly and it's shaft. And if they did change the throttle body like some use the 4.0 litre on the four banger they still have to change the chip and injectors, or they lose power again. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Jersey wrote: > > What about this??? > > http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm > > "Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com... > > Hello everybody! > > > > I just realized that the net might help me answer a question. |
Re: need help about throttle body install.
They probably lost some power due to turbulence. They didn't change
the only restriction, the butterfly and it's shaft. And if they did change the throttle body like some use the 4.0 litre on the four banger they still have to change the chip and injectors, or they lose power again. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Jersey wrote: > > What about this??? > > http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm > > "Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com... > > Hello everybody! > > > > I just realized that the net might help me answer a question. |
Re: need help about throttle body install.
They probably lost some power due to turbulence. They didn't change
the only restriction, the butterfly and it's shaft. And if they did change the throttle body like some use the 4.0 litre on the four banger they still have to change the chip and injectors, or they lose power again. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Jersey wrote: > > What about this??? > > http://www3.mtco.com/bry/ThrottleBodyMod/TBMod.htm > > "Edwin J. Fowler" <ejudasf@yahoo,com> wrote in message news:7sMuc.22033$4x2.9140@fe2.texas.rr.com... > > Hello everybody! > > > > I just realized that the net might help me answer a question. |
All times are GMT -4. The time now is 12:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands