Mystery valve help needed
02-14-2005, 03:17 PM
#21
Guest
Posts: n/a
Re: Mystery valve help needed
Number twenty would be the roll-over vent valve:
http://www.----------.com/YJfuelLines.pdf
"L.W.(ßill) ------ III" wrote:
>
> Could be your gas tank roll-over check valve. Some attached to the
> frame cross member just forward of the tank.
> God Bless America, ßill O|||||||O
> mailto:--------------------
http://www.----------.com/YJfuelLines.pdf
"L.W.(ßill) ------ III" wrote:
>
> Could be your gas tank roll-over check valve. Some attached to the
> frame cross member just forward of the tank.
> God Bless America, ßill O|||||||O
> mailto:--------------------
02-14-2005, 03:17 PM
#22
Guest
Posts: n/a
Re: Mystery valve help needed
Number twenty would be the roll-over vent valve:
http://www.----------.com/YJfuelLines.pdf
"L.W.(ßill) ------ III" wrote:
>
> Could be your gas tank roll-over check valve. Some attached to the
> frame cross member just forward of the tank.
> God Bless America, ßill O|||||||O
> mailto:--------------------
http://www.----------.com/YJfuelLines.pdf
"L.W.(ßill) ------ III" wrote:
>
> Could be your gas tank roll-over check valve. Some attached to the
> frame cross member just forward of the tank.
> God Bless America, ßill O|||||||O
> mailto:--------------------
02-14-2005, 04:06 PM
#23
Guest
Posts: n/a
Re: Mystery valve help needed
As long as the doohicky they give you looks like the doohicky you carried
in, then all is well.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42110014.142F1FE0@***.net...
> It's a Doohicky
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeff Strickland wrote:
> >
> > Take the valve off and take it to the store with you. Drop it on the
counter
> > and say, "I need one of these." The guy will disappear to the back of
the
> > store for a few minutes, when he returns he will have a part. Make sure
the
> > part looks like the one you brought into the store. Take the part home
and
> > hook it up.
> >
> > Have a beer and admire your repair.
in, then all is well.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42110014.142F1FE0@***.net...
> It's a Doohicky
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeff Strickland wrote:
> >
> > Take the valve off and take it to the store with you. Drop it on the
counter
> > and say, "I need one of these." The guy will disappear to the back of
the
> > store for a few minutes, when he returns he will have a part. Make sure
the
> > part looks like the one you brought into the store. Take the part home
and
> > hook it up.
> >
> > Have a beer and admire your repair.
02-14-2005, 04:06 PM
#24
Guest
Posts: n/a
Re: Mystery valve help needed
As long as the doohicky they give you looks like the doohicky you carried
in, then all is well.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42110014.142F1FE0@***.net...
> It's a Doohicky
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeff Strickland wrote:
> >
> > Take the valve off and take it to the store with you. Drop it on the
counter
> > and say, "I need one of these." The guy will disappear to the back of
the
> > store for a few minutes, when he returns he will have a part. Make sure
the
> > part looks like the one you brought into the store. Take the part home
and
> > hook it up.
> >
> > Have a beer and admire your repair.
in, then all is well.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42110014.142F1FE0@***.net...
> It's a Doohicky
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeff Strickland wrote:
> >
> > Take the valve off and take it to the store with you. Drop it on the
counter
> > and say, "I need one of these." The guy will disappear to the back of
the
> > store for a few minutes, when he returns he will have a part. Make sure
the
> > part looks like the one you brought into the store. Take the part home
and
> > hook it up.
> >
> > Have a beer and admire your repair.
02-14-2005, 04:06 PM
#25
Guest
Posts: n/a
Re: Mystery valve help needed
As long as the doohicky they give you looks like the doohicky you carried
in, then all is well.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42110014.142F1FE0@***.net...
> It's a Doohicky
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeff Strickland wrote:
> >
> > Take the valve off and take it to the store with you. Drop it on the
counter
> > and say, "I need one of these." The guy will disappear to the back of
the
> > store for a few minutes, when he returns he will have a part. Make sure
the
> > part looks like the one you brought into the store. Take the part home
and
> > hook it up.
> >
> > Have a beer and admire your repair.
in, then all is well.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42110014.142F1FE0@***.net...
> It's a Doohicky
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Jeff Strickland wrote:
> >
> > Take the valve off and take it to the store with you. Drop it on the
counter
> > and say, "I need one of these." The guy will disappear to the back of
the
> > store for a few minutes, when he returns he will have a part. Make sure
the
> > part looks like the one you brought into the store. Take the part home
and
> > hook it up.
> >
> > Have a beer and admire your repair.
02-14-2005, 04:11 PM
#26
Guest
Posts: n/a
Re: Mystery valve help needed
My parts guy at NAPA builds custom cars, when he see me coming, he knows the
book is at best a starting point. Amazingly, when I bring in the various
assorted doohickies - Bill's word - my parts guy usually knows what it is.
He needs the make and model just to confirm his suspicions.
My NAPA store is a Commerical Truck center, or some such thing. The guys in
there are better than your average parts guys. If they come out from the
back with the wrong part, they can normally cross reference whatever I
walked in with and I leave with a part that works.
"wallster" <weldingwalt@hotmail.com> wrote in message
news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> i want to go to that parts store! whenever i stop in for anything the
> guy has to know the make, model, engine size, mothers maiden name and
> shoe size before he can look up the wrong part on his computer.
>
> wall
>
book is at best a starting point. Amazingly, when I bring in the various
assorted doohickies - Bill's word - my parts guy usually knows what it is.
He needs the make and model just to confirm his suspicions.
My NAPA store is a Commerical Truck center, or some such thing. The guys in
there are better than your average parts guys. If they come out from the
back with the wrong part, they can normally cross reference whatever I
walked in with and I leave with a part that works.
"wallster" <weldingwalt@hotmail.com> wrote in message
news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> i want to go to that parts store! whenever i stop in for anything the
> guy has to know the make, model, engine size, mothers maiden name and
> shoe size before he can look up the wrong part on his computer.
>
> wall
>
02-14-2005, 04:11 PM
#27
Guest
Posts: n/a
Re: Mystery valve help needed
My parts guy at NAPA builds custom cars, when he see me coming, he knows the
book is at best a starting point. Amazingly, when I bring in the various
assorted doohickies - Bill's word - my parts guy usually knows what it is.
He needs the make and model just to confirm his suspicions.
My NAPA store is a Commerical Truck center, or some such thing. The guys in
there are better than your average parts guys. If they come out from the
back with the wrong part, they can normally cross reference whatever I
walked in with and I leave with a part that works.
"wallster" <weldingwalt@hotmail.com> wrote in message
news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> i want to go to that parts store! whenever i stop in for anything the
> guy has to know the make, model, engine size, mothers maiden name and
> shoe size before he can look up the wrong part on his computer.
>
> wall
>
book is at best a starting point. Amazingly, when I bring in the various
assorted doohickies - Bill's word - my parts guy usually knows what it is.
He needs the make and model just to confirm his suspicions.
My NAPA store is a Commerical Truck center, or some such thing. The guys in
there are better than your average parts guys. If they come out from the
back with the wrong part, they can normally cross reference whatever I
walked in with and I leave with a part that works.
"wallster" <weldingwalt@hotmail.com> wrote in message
news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> i want to go to that parts store! whenever i stop in for anything the
> guy has to know the make, model, engine size, mothers maiden name and
> shoe size before he can look up the wrong part on his computer.
>
> wall
>
02-14-2005, 04:11 PM
#28
Guest
Posts: n/a
Re: Mystery valve help needed
My parts guy at NAPA builds custom cars, when he see me coming, he knows the
book is at best a starting point. Amazingly, when I bring in the various
assorted doohickies - Bill's word - my parts guy usually knows what it is.
He needs the make and model just to confirm his suspicions.
My NAPA store is a Commerical Truck center, or some such thing. The guys in
there are better than your average parts guys. If they come out from the
back with the wrong part, they can normally cross reference whatever I
walked in with and I leave with a part that works.
"wallster" <weldingwalt@hotmail.com> wrote in message
news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> i want to go to that parts store! whenever i stop in for anything the
> guy has to know the make, model, engine size, mothers maiden name and
> shoe size before he can look up the wrong part on his computer.
>
> wall
>
book is at best a starting point. Amazingly, when I bring in the various
assorted doohickies - Bill's word - my parts guy usually knows what it is.
He needs the make and model just to confirm his suspicions.
My NAPA store is a Commerical Truck center, or some such thing. The guys in
there are better than your average parts guys. If they come out from the
back with the wrong part, they can normally cross reference whatever I
walked in with and I leave with a part that works.
"wallster" <weldingwalt@hotmail.com> wrote in message
news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> i want to go to that parts store! whenever i stop in for anything the
> guy has to know the make, model, engine size, mothers maiden name and
> shoe size before he can look up the wrong part on his computer.
>
> wall
>
02-14-2005, 04:51 PM
#29
Guest
Posts: n/a
Re: Mystery valve help needed
Guys like that are worth their weight in gold!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff Strickland wrote:
>
> My parts guy at NAPA builds custom cars, when he see me coming, he knows the
> book is at best a starting point. Amazingly, when I bring in the various
> assorted doohickies - Bill's word - my parts guy usually knows what it is.
> He needs the make and model just to confirm his suspicions.
>
> My NAPA store is a Commerical Truck center, or some such thing. The guys in
> there are better than your average parts guys. If they come out from the
> back with the wrong part, they can normally cross reference whatever I
> walked in with and I leave with a part that works.
>
> "wallster" <weldingwalt@hotmail.com> wrote in message
> news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> > i want to go to that parts store! whenever i stop in for anything the
> > guy has to know the make, model, engine size, mothers maiden name and
> > shoe size before he can look up the wrong part on his computer.
> >
> > wall
> >
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff Strickland wrote:
>
> My parts guy at NAPA builds custom cars, when he see me coming, he knows the
> book is at best a starting point. Amazingly, when I bring in the various
> assorted doohickies - Bill's word - my parts guy usually knows what it is.
> He needs the make and model just to confirm his suspicions.
>
> My NAPA store is a Commerical Truck center, or some such thing. The guys in
> there are better than your average parts guys. If they come out from the
> back with the wrong part, they can normally cross reference whatever I
> walked in with and I leave with a part that works.
>
> "wallster" <weldingwalt@hotmail.com> wrote in message
> news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> > i want to go to that parts store! whenever i stop in for anything the
> > guy has to know the make, model, engine size, mothers maiden name and
> > shoe size before he can look up the wrong part on his computer.
> >
> > wall
> >
02-14-2005, 04:51 PM
#30
Guest
Posts: n/a
Re: Mystery valve help needed
Guys like that are worth their weight in gold!
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff Strickland wrote:
>
> My parts guy at NAPA builds custom cars, when he see me coming, he knows the
> book is at best a starting point. Amazingly, when I bring in the various
> assorted doohickies - Bill's word - my parts guy usually knows what it is.
> He needs the make and model just to confirm his suspicions.
>
> My NAPA store is a Commerical Truck center, or some such thing. The guys in
> there are better than your average parts guys. If they come out from the
> back with the wrong part, they can normally cross reference whatever I
> walked in with and I leave with a part that works.
>
> "wallster" <weldingwalt@hotmail.com> wrote in message
> news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> > i want to go to that parts store! whenever i stop in for anything the
> > guy has to know the make, model, engine size, mothers maiden name and
> > shoe size before he can look up the wrong part on his computer.
> >
> > wall
> >
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Jeff Strickland wrote:
>
> My parts guy at NAPA builds custom cars, when he see me coming, he knows the
> book is at best a starting point. Amazingly, when I bring in the various
> assorted doohickies - Bill's word - my parts guy usually knows what it is.
> He needs the make and model just to confirm his suspicions.
>
> My NAPA store is a Commerical Truck center, or some such thing. The guys in
> there are better than your average parts guys. If they come out from the
> back with the wrong part, they can normally cross reference whatever I
> walked in with and I leave with a part that works.
>
> "wallster" <weldingwalt@hotmail.com> wrote in message
> news:1108410317.933540.78140@l41g2000cwc.googlegro ups.com...
> > i want to go to that parts store! whenever i stop in for anything the
> > guy has to know the make, model, engine size, mothers maiden name and
> > shoe size before he can look up the wrong part on his computer.
> >
> > wall
> >
