My CJ7 is having fits on me!
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
The CJ has been my daily driver, I just haven't driven very much
lately. I am just going to try and give it some TLC and talk to it
nice...
My arm/shoulder seems screwed unfortunately. I have tendonosis in the
supraspinatus tendon with some other muscle damage and nerve root damage
from 3 compressed vertabra/disk sets that turns the muscles to bad knots
if I put any stress on them or move my head the wrong way. Even the
insurance company's doctor is saying I will never likely use it properly
again. Ah well, in for a different set of physio doctors now so I will
see what they can do.
Mike
Will Honea wrote:
>
> I'm lazy, so when I'm on the farm or out at the cabin and need to get
> something running, I tend to spray the carb bowls full of carb cleaner
> as soon as I get there. Let them set for an hour or so (coupla beers)
> then have at them. I found a cheap cleaner that is also a pretty fair
> substitute for starting fluid which also helps.
>
> Ever notice that the heater quits at 10 below, the windshield wipers
> work until it rains, and the darned thing absolutely knows when you
> left the spare tire home?
>
> Any prognosis on the arm?
>
> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > LOL!
> >
> > I did know better that's for sure, but crap man I didn't want to have to
> > try and remove the rad for a solder job at -25C just before going on a
> > trip. I only have one arm that works these days so working on crap is a
> > real pain in the butt among other places....
> >
> > Oh and my wife hasn't noticed the emery board I used to polish up the
> > carb float needle yet so if I am careful/lucky I might get away with the
> > hot water trip too. ;-)
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > drain connector on your hot water heater in the house. Open the
> > > drain, flush with warm hands, then find someplace to hide when the
> > > wife figures out you used ALL the hot water.
> > >
> > > Sounds like the CJ is letting you know how it feels about being
> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > better than that!
> > >
> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > can flush it....
> > > >
> > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > money to have a heated garage flush the core. It was flushed last fall
> > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > boots and ski pants like now....
> > > >
> > > > I think I got the carb working again though. The float needle had built
> > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > gas seems to want to stay inside the carb where it belongs.
> > > >
> > > > Mike
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Interesting.
> > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > thought were well maintained. Just used the garden hose and back
> > > > > flushed, and they went for no heat to having to turn it down.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > maybe reverse the hoses.
> > > > > >
> > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > to 3000 rpm and I have heat.
> > > > > >
> > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > >
> > > > > > Mike
> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > 88 Cherokee 235 BFG AT's
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > indicates an air pocket.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > something blocking the flow somehow.
> > > > > > > >
> > > > > > > > Mike
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
lately. I am just going to try and give it some TLC and talk to it
nice...
My arm/shoulder seems screwed unfortunately. I have tendonosis in the
supraspinatus tendon with some other muscle damage and nerve root damage
from 3 compressed vertabra/disk sets that turns the muscles to bad knots
if I put any stress on them or move my head the wrong way. Even the
insurance company's doctor is saying I will never likely use it properly
again. Ah well, in for a different set of physio doctors now so I will
see what they can do.
Mike
Will Honea wrote:
>
> I'm lazy, so when I'm on the farm or out at the cabin and need to get
> something running, I tend to spray the carb bowls full of carb cleaner
> as soon as I get there. Let them set for an hour or so (coupla beers)
> then have at them. I found a cheap cleaner that is also a pretty fair
> substitute for starting fluid which also helps.
>
> Ever notice that the heater quits at 10 below, the windshield wipers
> work until it rains, and the darned thing absolutely knows when you
> left the spare tire home?
>
> Any prognosis on the arm?
>
> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > LOL!
> >
> > I did know better that's for sure, but crap man I didn't want to have to
> > try and remove the rad for a solder job at -25C just before going on a
> > trip. I only have one arm that works these days so working on crap is a
> > real pain in the butt among other places....
> >
> > Oh and my wife hasn't noticed the emery board I used to polish up the
> > carb float needle yet so if I am careful/lucky I might get away with the
> > hot water trip too. ;-)
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > drain connector on your hot water heater in the house. Open the
> > > drain, flush with warm hands, then find someplace to hide when the
> > > wife figures out you used ALL the hot water.
> > >
> > > Sounds like the CJ is letting you know how it feels about being
> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > better than that!
> > >
> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > can flush it....
> > > >
> > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > money to have a heated garage flush the core. It was flushed last fall
> > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > boots and ski pants like now....
> > > >
> > > > I think I got the carb working again though. The float needle had built
> > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > gas seems to want to stay inside the carb where it belongs.
> > > >
> > > > Mike
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Interesting.
> > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > thought were well maintained. Just used the garden hose and back
> > > > > flushed, and they went for no heat to having to turn it down.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > maybe reverse the hoses.
> > > > > >
> > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > to 3000 rpm and I have heat.
> > > > > >
> > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > >
> > > > > > Mike
> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > 88 Cherokee 235 BFG AT's
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > indicates an air pocket.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > something blocking the flow somehow.
> > > > > > > >
> > > > > > > > Mike
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Ever try acupuncture or other ancient Chinese secrets? some of them work
wonders.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423AE49C.E4060A1E@sympatico.ca...
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
>>
>> I'm lazy, so when I'm on the farm or out at the cabin and need to get
>> something running, I tend to spray the carb bowls full of carb cleaner
>> as soon as I get there. Let them set for an hour or so (coupla beers)
>> then have at them. I found a cheap cleaner that is also a pretty fair
>> substitute for starting fluid which also helps.
>>
>> Ever notice that the heater quits at 10 below, the windshield wipers
>> work until it rains, and the darned thing absolutely knows when you
>> left the spare tire home?
>>
>> Any prognosis on the arm?
>>
>> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
>> wrote:
>>
>> > LOL!
>> >
>> > I did know better that's for sure, but crap man I didn't want to have
>> > to
>> > try and remove the rad for a solder job at -25C just before going on a
>> > trip. I only have one arm that works these days so working on crap is
>> > a
>> > real pain in the butt among other places....
>> >
>> > Oh and my wife hasn't noticed the emery board I used to polish up the
>> > carb float needle yet so if I am careful/lucky I might get away with
>> > the
>> > hot water trip too. ;-)
>> >
>> > Mike
>> >
>> > Will Honea wrote:
>> > >
>> > > Mike, if push comes to shove go buy a cheap hose and screw it onto
>> > > the
>> > > drain connector on your hot water heater in the house. Open the
>> > > drain, flush with warm hands, then find someplace to hide when the
>> > > wife figures out you used ALL the hot water.
>> > >
>> > > Sounds like the CJ is letting you know how it feels about being
>> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
>> > > better than that!
>> > >
>> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
>> > > wrote:
>> > >
>> > > > Well ya know, my hose is currently imbedded in a block of ice that
>> > > > goes
>> > > > down to bedrock so I am going to have to wait for a few weeks
>> > > > before I
>> > > > can flush it....
>> > > >
>> > > > Maybe a new pump will have the power to clear it or I have to go
>> > > > spend
>> > > > money to have a heated garage flush the core. It was flushed last
>> > > > fall
>> > > > and I had wicked heat, didn't even need a coat on, let alone gloves
>> > > > and
>> > > > boots and ski pants like now....
>> > > >
>> > > > I think I got the carb working again though. The float needle had
>> > > > built
>> > > > up varnish crap on one of it's 3 slider rails. I polished it up
>> > > > and the
>> > > > gas seems to want to stay inside the carb where it belongs.
>> > > >
>> > > > Mike
>> > > >
>> > > > "L.W.(ßill) ------ III" wrote:
>> > > > >
>> > > > > Hi Mike,
>> > > > > Interesting.
>> > > > > All though, I have found a lot of clogged heater cores, on
>> > > > > cars I
>> > > > > thought were well maintained. Just used the garden hose and back
>> > > > > flushed, and they went for no heat to having to turn it down.
>> > > > > God Bless America, ßill O|||||||O
>> > > > > mailto:-------------------- http://www.----------.com/
>> > > > >
>> > > > > Mike Romain wrote:
>> > > > > >
>> > > > > > I believe the slow flow out of the pump allowed all the stop
>> > > > > > leak to
>> > > > > > gather in the heater core blocking the flow. I now have half
>> > > > > > flow. Hot
>> > > > > > top hose and luke warm lower return to the pump. Gotta flush
>> > > > > > it or
>> > > > > > maybe reverse the hoses.
>> > > > > >
>> > > > > > When it heated up with the cap off, it flowed backward for a
>> > > > > > while from
>> > > > > > what appeared to be convection flow out the block via the lower
>> > > > > > hose and
>> > > > > > only went forward out the top hose when I revved it up to 3000
>> > > > > > or so.
>> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat,
>> > > > > > got up
>> > > > > > to 3000 rpm and I have heat.
>> > > > > >
>> > > > > > Bottom rad hose is new and has a spring in it so no collapse
>> > > > > > there.
>> > > > > >
>> > > > > > Mike
>> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > > > > 88 Cherokee 235 BFG AT's
>> > > > > >
>> > > > > > "L.W.(ßill) ------ III" wrote:
>> > > > > > >
>> > > > > > > Hi Mike,
>> > > > > > > Could be, I lost one in Germany, and didn't even realize
>> > > > > > > it until
>> > > > > > > the one day it reached eighty degrees, and it boiled. Ford
>> > > > > > > didn't use a
>> > > > > > > pump on their Model "T". I was just guessing by the heater
>> > > > > > > not working
>> > > > > > > indicates an air pocket.
>> > > > > > > God Bless America, ßill O|||||||O
>> > > > > > > mailto:-------------------- http://www.----------.com/
>> > > > > > >
>> > > > > > > Mike Romain wrote:
>> > > > > > > >
>> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not
>> > > > > > > > losing fluid.
>> > > > > > > > The only thing I can think of is the pump impeller loose on
>> > > > > > > > the shaft or
>> > > > > > > > something blocking the flow somehow.
>> > > > > > > >
>> > > > > > > > Mike
>> > >
>> > > --
>> > > Will Honea
>>
>> --
>> Will Honea
wonders.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423AE49C.E4060A1E@sympatico.ca...
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
>>
>> I'm lazy, so when I'm on the farm or out at the cabin and need to get
>> something running, I tend to spray the carb bowls full of carb cleaner
>> as soon as I get there. Let them set for an hour or so (coupla beers)
>> then have at them. I found a cheap cleaner that is also a pretty fair
>> substitute for starting fluid which also helps.
>>
>> Ever notice that the heater quits at 10 below, the windshield wipers
>> work until it rains, and the darned thing absolutely knows when you
>> left the spare tire home?
>>
>> Any prognosis on the arm?
>>
>> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
>> wrote:
>>
>> > LOL!
>> >
>> > I did know better that's for sure, but crap man I didn't want to have
>> > to
>> > try and remove the rad for a solder job at -25C just before going on a
>> > trip. I only have one arm that works these days so working on crap is
>> > a
>> > real pain in the butt among other places....
>> >
>> > Oh and my wife hasn't noticed the emery board I used to polish up the
>> > carb float needle yet so if I am careful/lucky I might get away with
>> > the
>> > hot water trip too. ;-)
>> >
>> > Mike
>> >
>> > Will Honea wrote:
>> > >
>> > > Mike, if push comes to shove go buy a cheap hose and screw it onto
>> > > the
>> > > drain connector on your hot water heater in the house. Open the
>> > > drain, flush with warm hands, then find someplace to hide when the
>> > > wife figures out you used ALL the hot water.
>> > >
>> > > Sounds like the CJ is letting you know how it feels about being
>> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
>> > > better than that!
>> > >
>> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
>> > > wrote:
>> > >
>> > > > Well ya know, my hose is currently imbedded in a block of ice that
>> > > > goes
>> > > > down to bedrock so I am going to have to wait for a few weeks
>> > > > before I
>> > > > can flush it....
>> > > >
>> > > > Maybe a new pump will have the power to clear it or I have to go
>> > > > spend
>> > > > money to have a heated garage flush the core. It was flushed last
>> > > > fall
>> > > > and I had wicked heat, didn't even need a coat on, let alone gloves
>> > > > and
>> > > > boots and ski pants like now....
>> > > >
>> > > > I think I got the carb working again though. The float needle had
>> > > > built
>> > > > up varnish crap on one of it's 3 slider rails. I polished it up
>> > > > and the
>> > > > gas seems to want to stay inside the carb where it belongs.
>> > > >
>> > > > Mike
>> > > >
>> > > > "L.W.(ßill) ------ III" wrote:
>> > > > >
>> > > > > Hi Mike,
>> > > > > Interesting.
>> > > > > All though, I have found a lot of clogged heater cores, on
>> > > > > cars I
>> > > > > thought were well maintained. Just used the garden hose and back
>> > > > > flushed, and they went for no heat to having to turn it down.
>> > > > > God Bless America, ßill O|||||||O
>> > > > > mailto:-------------------- http://www.----------.com/
>> > > > >
>> > > > > Mike Romain wrote:
>> > > > > >
>> > > > > > I believe the slow flow out of the pump allowed all the stop
>> > > > > > leak to
>> > > > > > gather in the heater core blocking the flow. I now have half
>> > > > > > flow. Hot
>> > > > > > top hose and luke warm lower return to the pump. Gotta flush
>> > > > > > it or
>> > > > > > maybe reverse the hoses.
>> > > > > >
>> > > > > > When it heated up with the cap off, it flowed backward for a
>> > > > > > while from
>> > > > > > what appeared to be convection flow out the block via the lower
>> > > > > > hose and
>> > > > > > only went forward out the top hose when I revved it up to 3000
>> > > > > > or so.
>> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat,
>> > > > > > got up
>> > > > > > to 3000 rpm and I have heat.
>> > > > > >
>> > > > > > Bottom rad hose is new and has a spring in it so no collapse
>> > > > > > there.
>> > > > > >
>> > > > > > Mike
>> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > > > > 88 Cherokee 235 BFG AT's
>> > > > > >
>> > > > > > "L.W.(ßill) ------ III" wrote:
>> > > > > > >
>> > > > > > > Hi Mike,
>> > > > > > > Could be, I lost one in Germany, and didn't even realize
>> > > > > > > it until
>> > > > > > > the one day it reached eighty degrees, and it boiled. Ford
>> > > > > > > didn't use a
>> > > > > > > pump on their Model "T". I was just guessing by the heater
>> > > > > > > not working
>> > > > > > > indicates an air pocket.
>> > > > > > > God Bless America, ßill O|||||||O
>> > > > > > > mailto:-------------------- http://www.----------.com/
>> > > > > > >
>> > > > > > > Mike Romain wrote:
>> > > > > > > >
>> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not
>> > > > > > > > losing fluid.
>> > > > > > > > The only thing I can think of is the pump impeller loose on
>> > > > > > > > the shaft or
>> > > > > > > > something blocking the flow somehow.
>> > > > > > > >
>> > > > > > > > Mike
>> > >
>> > > --
>> > > Will Honea
>>
>> --
>> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Ever try acupuncture or other ancient Chinese secrets? some of them work
wonders.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423AE49C.E4060A1E@sympatico.ca...
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
>>
>> I'm lazy, so when I'm on the farm or out at the cabin and need to get
>> something running, I tend to spray the carb bowls full of carb cleaner
>> as soon as I get there. Let them set for an hour or so (coupla beers)
>> then have at them. I found a cheap cleaner that is also a pretty fair
>> substitute for starting fluid which also helps.
>>
>> Ever notice that the heater quits at 10 below, the windshield wipers
>> work until it rains, and the darned thing absolutely knows when you
>> left the spare tire home?
>>
>> Any prognosis on the arm?
>>
>> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
>> wrote:
>>
>> > LOL!
>> >
>> > I did know better that's for sure, but crap man I didn't want to have
>> > to
>> > try and remove the rad for a solder job at -25C just before going on a
>> > trip. I only have one arm that works these days so working on crap is
>> > a
>> > real pain in the butt among other places....
>> >
>> > Oh and my wife hasn't noticed the emery board I used to polish up the
>> > carb float needle yet so if I am careful/lucky I might get away with
>> > the
>> > hot water trip too. ;-)
>> >
>> > Mike
>> >
>> > Will Honea wrote:
>> > >
>> > > Mike, if push comes to shove go buy a cheap hose and screw it onto
>> > > the
>> > > drain connector on your hot water heater in the house. Open the
>> > > drain, flush with warm hands, then find someplace to hide when the
>> > > wife figures out you used ALL the hot water.
>> > >
>> > > Sounds like the CJ is letting you know how it feels about being
>> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
>> > > better than that!
>> > >
>> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
>> > > wrote:
>> > >
>> > > > Well ya know, my hose is currently imbedded in a block of ice that
>> > > > goes
>> > > > down to bedrock so I am going to have to wait for a few weeks
>> > > > before I
>> > > > can flush it....
>> > > >
>> > > > Maybe a new pump will have the power to clear it or I have to go
>> > > > spend
>> > > > money to have a heated garage flush the core. It was flushed last
>> > > > fall
>> > > > and I had wicked heat, didn't even need a coat on, let alone gloves
>> > > > and
>> > > > boots and ski pants like now....
>> > > >
>> > > > I think I got the carb working again though. The float needle had
>> > > > built
>> > > > up varnish crap on one of it's 3 slider rails. I polished it up
>> > > > and the
>> > > > gas seems to want to stay inside the carb where it belongs.
>> > > >
>> > > > Mike
>> > > >
>> > > > "L.W.(ßill) ------ III" wrote:
>> > > > >
>> > > > > Hi Mike,
>> > > > > Interesting.
>> > > > > All though, I have found a lot of clogged heater cores, on
>> > > > > cars I
>> > > > > thought were well maintained. Just used the garden hose and back
>> > > > > flushed, and they went for no heat to having to turn it down.
>> > > > > God Bless America, ßill O|||||||O
>> > > > > mailto:-------------------- http://www.----------.com/
>> > > > >
>> > > > > Mike Romain wrote:
>> > > > > >
>> > > > > > I believe the slow flow out of the pump allowed all the stop
>> > > > > > leak to
>> > > > > > gather in the heater core blocking the flow. I now have half
>> > > > > > flow. Hot
>> > > > > > top hose and luke warm lower return to the pump. Gotta flush
>> > > > > > it or
>> > > > > > maybe reverse the hoses.
>> > > > > >
>> > > > > > When it heated up with the cap off, it flowed backward for a
>> > > > > > while from
>> > > > > > what appeared to be convection flow out the block via the lower
>> > > > > > hose and
>> > > > > > only went forward out the top hose when I revved it up to 3000
>> > > > > > or so.
>> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat,
>> > > > > > got up
>> > > > > > to 3000 rpm and I have heat.
>> > > > > >
>> > > > > > Bottom rad hose is new and has a spring in it so no collapse
>> > > > > > there.
>> > > > > >
>> > > > > > Mike
>> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > > > > 88 Cherokee 235 BFG AT's
>> > > > > >
>> > > > > > "L.W.(ßill) ------ III" wrote:
>> > > > > > >
>> > > > > > > Hi Mike,
>> > > > > > > Could be, I lost one in Germany, and didn't even realize
>> > > > > > > it until
>> > > > > > > the one day it reached eighty degrees, and it boiled. Ford
>> > > > > > > didn't use a
>> > > > > > > pump on their Model "T". I was just guessing by the heater
>> > > > > > > not working
>> > > > > > > indicates an air pocket.
>> > > > > > > God Bless America, ßill O|||||||O
>> > > > > > > mailto:-------------------- http://www.----------.com/
>> > > > > > >
>> > > > > > > Mike Romain wrote:
>> > > > > > > >
>> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not
>> > > > > > > > losing fluid.
>> > > > > > > > The only thing I can think of is the pump impeller loose on
>> > > > > > > > the shaft or
>> > > > > > > > something blocking the flow somehow.
>> > > > > > > >
>> > > > > > > > Mike
>> > >
>> > > --
>> > > Will Honea
>>
>> --
>> Will Honea
wonders.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423AE49C.E4060A1E@sympatico.ca...
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
>>
>> I'm lazy, so when I'm on the farm or out at the cabin and need to get
>> something running, I tend to spray the carb bowls full of carb cleaner
>> as soon as I get there. Let them set for an hour or so (coupla beers)
>> then have at them. I found a cheap cleaner that is also a pretty fair
>> substitute for starting fluid which also helps.
>>
>> Ever notice that the heater quits at 10 below, the windshield wipers
>> work until it rains, and the darned thing absolutely knows when you
>> left the spare tire home?
>>
>> Any prognosis on the arm?
>>
>> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
>> wrote:
>>
>> > LOL!
>> >
>> > I did know better that's for sure, but crap man I didn't want to have
>> > to
>> > try and remove the rad for a solder job at -25C just before going on a
>> > trip. I only have one arm that works these days so working on crap is
>> > a
>> > real pain in the butt among other places....
>> >
>> > Oh and my wife hasn't noticed the emery board I used to polish up the
>> > carb float needle yet so if I am careful/lucky I might get away with
>> > the
>> > hot water trip too. ;-)
>> >
>> > Mike
>> >
>> > Will Honea wrote:
>> > >
>> > > Mike, if push comes to shove go buy a cheap hose and screw it onto
>> > > the
>> > > drain connector on your hot water heater in the house. Open the
>> > > drain, flush with warm hands, then find someplace to hide when the
>> > > wife figures out you used ALL the hot water.
>> > >
>> > > Sounds like the CJ is letting you know how it feels about being
>> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
>> > > better than that!
>> > >
>> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
>> > > wrote:
>> > >
>> > > > Well ya know, my hose is currently imbedded in a block of ice that
>> > > > goes
>> > > > down to bedrock so I am going to have to wait for a few weeks
>> > > > before I
>> > > > can flush it....
>> > > >
>> > > > Maybe a new pump will have the power to clear it or I have to go
>> > > > spend
>> > > > money to have a heated garage flush the core. It was flushed last
>> > > > fall
>> > > > and I had wicked heat, didn't even need a coat on, let alone gloves
>> > > > and
>> > > > boots and ski pants like now....
>> > > >
>> > > > I think I got the carb working again though. The float needle had
>> > > > built
>> > > > up varnish crap on one of it's 3 slider rails. I polished it up
>> > > > and the
>> > > > gas seems to want to stay inside the carb where it belongs.
>> > > >
>> > > > Mike
>> > > >
>> > > > "L.W.(ßill) ------ III" wrote:
>> > > > >
>> > > > > Hi Mike,
>> > > > > Interesting.
>> > > > > All though, I have found a lot of clogged heater cores, on
>> > > > > cars I
>> > > > > thought were well maintained. Just used the garden hose and back
>> > > > > flushed, and they went for no heat to having to turn it down.
>> > > > > God Bless America, ßill O|||||||O
>> > > > > mailto:-------------------- http://www.----------.com/
>> > > > >
>> > > > > Mike Romain wrote:
>> > > > > >
>> > > > > > I believe the slow flow out of the pump allowed all the stop
>> > > > > > leak to
>> > > > > > gather in the heater core blocking the flow. I now have half
>> > > > > > flow. Hot
>> > > > > > top hose and luke warm lower return to the pump. Gotta flush
>> > > > > > it or
>> > > > > > maybe reverse the hoses.
>> > > > > >
>> > > > > > When it heated up with the cap off, it flowed backward for a
>> > > > > > while from
>> > > > > > what appeared to be convection flow out the block via the lower
>> > > > > > hose and
>> > > > > > only went forward out the top hose when I revved it up to 3000
>> > > > > > or so.
>> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat,
>> > > > > > got up
>> > > > > > to 3000 rpm and I have heat.
>> > > > > >
>> > > > > > Bottom rad hose is new and has a spring in it so no collapse
>> > > > > > there.
>> > > > > >
>> > > > > > Mike
>> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > > > > 88 Cherokee 235 BFG AT's
>> > > > > >
>> > > > > > "L.W.(ßill) ------ III" wrote:
>> > > > > > >
>> > > > > > > Hi Mike,
>> > > > > > > Could be, I lost one in Germany, and didn't even realize
>> > > > > > > it until
>> > > > > > > the one day it reached eighty degrees, and it boiled. Ford
>> > > > > > > didn't use a
>> > > > > > > pump on their Model "T". I was just guessing by the heater
>> > > > > > > not working
>> > > > > > > indicates an air pocket.
>> > > > > > > God Bless America, ßill O|||||||O
>> > > > > > > mailto:-------------------- http://www.----------.com/
>> > > > > > >
>> > > > > > > Mike Romain wrote:
>> > > > > > > >
>> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not
>> > > > > > > > losing fluid.
>> > > > > > > > The only thing I can think of is the pump impeller loose on
>> > > > > > > > the shaft or
>> > > > > > > > something blocking the flow somehow.
>> > > > > > > >
>> > > > > > > > Mike
>> > >
>> > > --
>> > > Will Honea
>>
>> --
>> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Ever try acupuncture or other ancient Chinese secrets? some of them work
wonders.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423AE49C.E4060A1E@sympatico.ca...
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
>>
>> I'm lazy, so when I'm on the farm or out at the cabin and need to get
>> something running, I tend to spray the carb bowls full of carb cleaner
>> as soon as I get there. Let them set for an hour or so (coupla beers)
>> then have at them. I found a cheap cleaner that is also a pretty fair
>> substitute for starting fluid which also helps.
>>
>> Ever notice that the heater quits at 10 below, the windshield wipers
>> work until it rains, and the darned thing absolutely knows when you
>> left the spare tire home?
>>
>> Any prognosis on the arm?
>>
>> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
>> wrote:
>>
>> > LOL!
>> >
>> > I did know better that's for sure, but crap man I didn't want to have
>> > to
>> > try and remove the rad for a solder job at -25C just before going on a
>> > trip. I only have one arm that works these days so working on crap is
>> > a
>> > real pain in the butt among other places....
>> >
>> > Oh and my wife hasn't noticed the emery board I used to polish up the
>> > carb float needle yet so if I am careful/lucky I might get away with
>> > the
>> > hot water trip too. ;-)
>> >
>> > Mike
>> >
>> > Will Honea wrote:
>> > >
>> > > Mike, if push comes to shove go buy a cheap hose and screw it onto
>> > > the
>> > > drain connector on your hot water heater in the house. Open the
>> > > drain, flush with warm hands, then find someplace to hide when the
>> > > wife figures out you used ALL the hot water.
>> > >
>> > > Sounds like the CJ is letting you know how it feels about being
>> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
>> > > better than that!
>> > >
>> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
>> > > wrote:
>> > >
>> > > > Well ya know, my hose is currently imbedded in a block of ice that
>> > > > goes
>> > > > down to bedrock so I am going to have to wait for a few weeks
>> > > > before I
>> > > > can flush it....
>> > > >
>> > > > Maybe a new pump will have the power to clear it or I have to go
>> > > > spend
>> > > > money to have a heated garage flush the core. It was flushed last
>> > > > fall
>> > > > and I had wicked heat, didn't even need a coat on, let alone gloves
>> > > > and
>> > > > boots and ski pants like now....
>> > > >
>> > > > I think I got the carb working again though. The float needle had
>> > > > built
>> > > > up varnish crap on one of it's 3 slider rails. I polished it up
>> > > > and the
>> > > > gas seems to want to stay inside the carb where it belongs.
>> > > >
>> > > > Mike
>> > > >
>> > > > "L.W.(ßill) ------ III" wrote:
>> > > > >
>> > > > > Hi Mike,
>> > > > > Interesting.
>> > > > > All though, I have found a lot of clogged heater cores, on
>> > > > > cars I
>> > > > > thought were well maintained. Just used the garden hose and back
>> > > > > flushed, and they went for no heat to having to turn it down.
>> > > > > God Bless America, ßill O|||||||O
>> > > > > mailto:-------------------- http://www.----------.com/
>> > > > >
>> > > > > Mike Romain wrote:
>> > > > > >
>> > > > > > I believe the slow flow out of the pump allowed all the stop
>> > > > > > leak to
>> > > > > > gather in the heater core blocking the flow. I now have half
>> > > > > > flow. Hot
>> > > > > > top hose and luke warm lower return to the pump. Gotta flush
>> > > > > > it or
>> > > > > > maybe reverse the hoses.
>> > > > > >
>> > > > > > When it heated up with the cap off, it flowed backward for a
>> > > > > > while from
>> > > > > > what appeared to be convection flow out the block via the lower
>> > > > > > hose and
>> > > > > > only went forward out the top hose when I revved it up to 3000
>> > > > > > or so.
>> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat,
>> > > > > > got up
>> > > > > > to 3000 rpm and I have heat.
>> > > > > >
>> > > > > > Bottom rad hose is new and has a spring in it so no collapse
>> > > > > > there.
>> > > > > >
>> > > > > > Mike
>> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > > > > 88 Cherokee 235 BFG AT's
>> > > > > >
>> > > > > > "L.W.(ßill) ------ III" wrote:
>> > > > > > >
>> > > > > > > Hi Mike,
>> > > > > > > Could be, I lost one in Germany, and didn't even realize
>> > > > > > > it until
>> > > > > > > the one day it reached eighty degrees, and it boiled. Ford
>> > > > > > > didn't use a
>> > > > > > > pump on their Model "T". I was just guessing by the heater
>> > > > > > > not working
>> > > > > > > indicates an air pocket.
>> > > > > > > God Bless America, ßill O|||||||O
>> > > > > > > mailto:-------------------- http://www.----------.com/
>> > > > > > >
>> > > > > > > Mike Romain wrote:
>> > > > > > > >
>> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not
>> > > > > > > > losing fluid.
>> > > > > > > > The only thing I can think of is the pump impeller loose on
>> > > > > > > > the shaft or
>> > > > > > > > something blocking the flow somehow.
>> > > > > > > >
>> > > > > > > > Mike
>> > >
>> > > --
>> > > Will Honea
>>
>> --
>> Will Honea
wonders.
Snow...
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:423AE49C.E4060A1E@sympatico.ca...
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
>>
>> I'm lazy, so when I'm on the farm or out at the cabin and need to get
>> something running, I tend to spray the carb bowls full of carb cleaner
>> as soon as I get there. Let them set for an hour or so (coupla beers)
>> then have at them. I found a cheap cleaner that is also a pretty fair
>> substitute for starting fluid which also helps.
>>
>> Ever notice that the heater quits at 10 below, the windshield wipers
>> work until it rains, and the darned thing absolutely knows when you
>> left the spare tire home?
>>
>> Any prognosis on the arm?
>>
>> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
>> wrote:
>>
>> > LOL!
>> >
>> > I did know better that's for sure, but crap man I didn't want to have
>> > to
>> > try and remove the rad for a solder job at -25C just before going on a
>> > trip. I only have one arm that works these days so working on crap is
>> > a
>> > real pain in the butt among other places....
>> >
>> > Oh and my wife hasn't noticed the emery board I used to polish up the
>> > carb float needle yet so if I am careful/lucky I might get away with
>> > the
>> > hot water trip too. ;-)
>> >
>> > Mike
>> >
>> > Will Honea wrote:
>> > >
>> > > Mike, if push comes to shove go buy a cheap hose and screw it onto
>> > > the
>> > > drain connector on your hot water heater in the house. Open the
>> > > drain, flush with warm hands, then find someplace to hide when the
>> > > wife figures out you used ALL the hot water.
>> > >
>> > > Sounds like the CJ is letting you know how it feels about being
>> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
>> > > better than that!
>> > >
>> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
>> > > wrote:
>> > >
>> > > > Well ya know, my hose is currently imbedded in a block of ice that
>> > > > goes
>> > > > down to bedrock so I am going to have to wait for a few weeks
>> > > > before I
>> > > > can flush it....
>> > > >
>> > > > Maybe a new pump will have the power to clear it or I have to go
>> > > > spend
>> > > > money to have a heated garage flush the core. It was flushed last
>> > > > fall
>> > > > and I had wicked heat, didn't even need a coat on, let alone gloves
>> > > > and
>> > > > boots and ski pants like now....
>> > > >
>> > > > I think I got the carb working again though. The float needle had
>> > > > built
>> > > > up varnish crap on one of it's 3 slider rails. I polished it up
>> > > > and the
>> > > > gas seems to want to stay inside the carb where it belongs.
>> > > >
>> > > > Mike
>> > > >
>> > > > "L.W.(ßill) ------ III" wrote:
>> > > > >
>> > > > > Hi Mike,
>> > > > > Interesting.
>> > > > > All though, I have found a lot of clogged heater cores, on
>> > > > > cars I
>> > > > > thought were well maintained. Just used the garden hose and back
>> > > > > flushed, and they went for no heat to having to turn it down.
>> > > > > God Bless America, ßill O|||||||O
>> > > > > mailto:-------------------- http://www.----------.com/
>> > > > >
>> > > > > Mike Romain wrote:
>> > > > > >
>> > > > > > I believe the slow flow out of the pump allowed all the stop
>> > > > > > leak to
>> > > > > > gather in the heater core blocking the flow. I now have half
>> > > > > > flow. Hot
>> > > > > > top hose and luke warm lower return to the pump. Gotta flush
>> > > > > > it or
>> > > > > > maybe reverse the hoses.
>> > > > > >
>> > > > > > When it heated up with the cap off, it flowed backward for a
>> > > > > > while from
>> > > > > > what appeared to be convection flow out the block via the lower
>> > > > > > hose and
>> > > > > > only went forward out the top hose when I revved it up to 3000
>> > > > > > or so.
>> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat,
>> > > > > > got up
>> > > > > > to 3000 rpm and I have heat.
>> > > > > >
>> > > > > > Bottom rad hose is new and has a spring in it so no collapse
>> > > > > > there.
>> > > > > >
>> > > > > > Mike
>> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> > > > > > 88 Cherokee 235 BFG AT's
>> > > > > >
>> > > > > > "L.W.(ßill) ------ III" wrote:
>> > > > > > >
>> > > > > > > Hi Mike,
>> > > > > > > Could be, I lost one in Germany, and didn't even realize
>> > > > > > > it until
>> > > > > > > the one day it reached eighty degrees, and it boiled. Ford
>> > > > > > > didn't use a
>> > > > > > > pump on their Model "T". I was just guessing by the heater
>> > > > > > > not working
>> > > > > > > indicates an air pocket.
>> > > > > > > God Bless America, ßill O|||||||O
>> > > > > > > mailto:-------------------- http://www.----------.com/
>> > > > > > >
>> > > > > > > Mike Romain wrote:
>> > > > > > > >
>> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not
>> > > > > > > > losing fluid.
>> > > > > > > > The only thing I can think of is the pump impeller loose on
>> > > > > > > > the shaft or
>> > > > > > > > something blocking the flow somehow.
>> > > > > > > >
>> > > > > > > > Mike
>> > >
>> > > --
>> > > Will Honea
>>
>> --
>> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Damn, I ache just reading about it. Something you might want to look
into is a form of shock treatment for the muscle/nerve problems.
After radiation therapy my jaws muscles would knot up something fierce
until my Dad had me try this little gizmo he had. In essence, it's
one of those piezio-electric igniters you see on barbeque grills and
gas appliances with a plunger and a big contact point on the end.
Darned thing will throw a half to three quarter inch spark but if you
set it right against the skin it just gives a little bump instead of
sparking. Anyway, I could put that up to the side of my face, pop it
3-4 times and the muscles would completely relax. Dad used it on his
back - same sort of damage you have but lower down and affected his
legs. It didn't work miracles for him but it sure helped a lot. In
fact, all of the 5 or 6 of those things I had have disappeared. My
DIL has MS and she swears by it to relieve the aches and muscle spasms
she suffers with that gawdawful nerve disease. If you would like to
try one, I'll dig up the mail order address for you. I think it was
$5-6 through one of the farm mailorder houses - postage cost as much
as the gadget. A lot of the benefit may be just snake oil but it
works on the same idea as the electro-shock therapy they use for
chronic pain cases (but one helluva lot cheaper!).
That might help the muscle/nerve pain but it won't do squat for the
tendonitis. I have a full set of air tools that I bought when both
forearms developed tendonitis so bad I could barely hold a screwdriver
much less turn it. Took a couple of years to get to the point I could
do much of anything without paying the price and 10 years later I
still have to watch myself to keep it from coming back.
On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
> >
> > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > something running, I tend to spray the carb bowls full of carb cleaner
> > as soon as I get there. Let them set for an hour or so (coupla beers)
> > then have at them. I found a cheap cleaner that is also a pretty fair
> > substitute for starting fluid which also helps.
> >
> > Ever notice that the heater quits at 10 below, the windshield wipers
> > work until it rains, and the darned thing absolutely knows when you
> > left the spare tire home?
> >
> > Any prognosis on the arm?
> >
> > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > LOL!
> > >
> > > I did know better that's for sure, but crap man I didn't want to have to
> > > try and remove the rad for a solder job at -25C just before going on a
> > > trip. I only have one arm that works these days so working on crap is a
> > > real pain in the butt among other places....
> > >
> > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > carb float needle yet so if I am careful/lucky I might get away with the
> > > hot water trip too. ;-)
> > >
> > > Mike
> > >
> > > Will Honea wrote:
> > > >
> > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > drain connector on your hot water heater in the house. Open the
> > > > drain, flush with warm hands, then find someplace to hide when the
> > > > wife figures out you used ALL the hot water.
> > > >
> > > > Sounds like the CJ is letting you know how it feels about being
> > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > better than that!
> > > >
> > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > wrote:
> > > >
> > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > can flush it....
> > > > >
> > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > boots and ski pants like now....
> > > > >
> > > > > I think I got the carb working again though. The float needle had built
> > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > gas seems to want to stay inside the carb where it belongs.
> > > > >
> > > > > Mike
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Interesting.
> > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > maybe reverse the hoses.
> > > > > > >
> > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > to 3000 rpm and I have heat.
> > > > > > >
> > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > >
> > > > > > > Mike
> > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > >
> > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > >
> > > > > > > > Hi Mike,
> > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > indicates an air pocket.
> > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > >
> > > > > > > > Mike Romain wrote:
> > > > > > > > >
> > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > something blocking the flow somehow.
> > > > > > > > >
> > > > > > > > > Mike
> > > >
> > > > --
> > > > Will Honea
> >
> > --
> > Will Honea
--
Will Honea
into is a form of shock treatment for the muscle/nerve problems.
After radiation therapy my jaws muscles would knot up something fierce
until my Dad had me try this little gizmo he had. In essence, it's
one of those piezio-electric igniters you see on barbeque grills and
gas appliances with a plunger and a big contact point on the end.
Darned thing will throw a half to three quarter inch spark but if you
set it right against the skin it just gives a little bump instead of
sparking. Anyway, I could put that up to the side of my face, pop it
3-4 times and the muscles would completely relax. Dad used it on his
back - same sort of damage you have but lower down and affected his
legs. It didn't work miracles for him but it sure helped a lot. In
fact, all of the 5 or 6 of those things I had have disappeared. My
DIL has MS and she swears by it to relieve the aches and muscle spasms
she suffers with that gawdawful nerve disease. If you would like to
try one, I'll dig up the mail order address for you. I think it was
$5-6 through one of the farm mailorder houses - postage cost as much
as the gadget. A lot of the benefit may be just snake oil but it
works on the same idea as the electro-shock therapy they use for
chronic pain cases (but one helluva lot cheaper!).
That might help the muscle/nerve pain but it won't do squat for the
tendonitis. I have a full set of air tools that I bought when both
forearms developed tendonitis so bad I could barely hold a screwdriver
much less turn it. Took a couple of years to get to the point I could
do much of anything without paying the price and 10 years later I
still have to watch myself to keep it from coming back.
On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
> >
> > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > something running, I tend to spray the carb bowls full of carb cleaner
> > as soon as I get there. Let them set for an hour or so (coupla beers)
> > then have at them. I found a cheap cleaner that is also a pretty fair
> > substitute for starting fluid which also helps.
> >
> > Ever notice that the heater quits at 10 below, the windshield wipers
> > work until it rains, and the darned thing absolutely knows when you
> > left the spare tire home?
> >
> > Any prognosis on the arm?
> >
> > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > LOL!
> > >
> > > I did know better that's for sure, but crap man I didn't want to have to
> > > try and remove the rad for a solder job at -25C just before going on a
> > > trip. I only have one arm that works these days so working on crap is a
> > > real pain in the butt among other places....
> > >
> > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > carb float needle yet so if I am careful/lucky I might get away with the
> > > hot water trip too. ;-)
> > >
> > > Mike
> > >
> > > Will Honea wrote:
> > > >
> > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > drain connector on your hot water heater in the house. Open the
> > > > drain, flush with warm hands, then find someplace to hide when the
> > > > wife figures out you used ALL the hot water.
> > > >
> > > > Sounds like the CJ is letting you know how it feels about being
> > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > better than that!
> > > >
> > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > wrote:
> > > >
> > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > can flush it....
> > > > >
> > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > boots and ski pants like now....
> > > > >
> > > > > I think I got the carb working again though. The float needle had built
> > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > gas seems to want to stay inside the carb where it belongs.
> > > > >
> > > > > Mike
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Interesting.
> > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > maybe reverse the hoses.
> > > > > > >
> > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > to 3000 rpm and I have heat.
> > > > > > >
> > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > >
> > > > > > > Mike
> > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > >
> > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > >
> > > > > > > > Hi Mike,
> > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > indicates an air pocket.
> > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > >
> > > > > > > > Mike Romain wrote:
> > > > > > > > >
> > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > something blocking the flow somehow.
> > > > > > > > >
> > > > > > > > > Mike
> > > >
> > > > --
> > > > Will Honea
> >
> > --
> > Will Honea
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Damn, I ache just reading about it. Something you might want to look
into is a form of shock treatment for the muscle/nerve problems.
After radiation therapy my jaws muscles would knot up something fierce
until my Dad had me try this little gizmo he had. In essence, it's
one of those piezio-electric igniters you see on barbeque grills and
gas appliances with a plunger and a big contact point on the end.
Darned thing will throw a half to three quarter inch spark but if you
set it right against the skin it just gives a little bump instead of
sparking. Anyway, I could put that up to the side of my face, pop it
3-4 times and the muscles would completely relax. Dad used it on his
back - same sort of damage you have but lower down and affected his
legs. It didn't work miracles for him but it sure helped a lot. In
fact, all of the 5 or 6 of those things I had have disappeared. My
DIL has MS and she swears by it to relieve the aches and muscle spasms
she suffers with that gawdawful nerve disease. If you would like to
try one, I'll dig up the mail order address for you. I think it was
$5-6 through one of the farm mailorder houses - postage cost as much
as the gadget. A lot of the benefit may be just snake oil but it
works on the same idea as the electro-shock therapy they use for
chronic pain cases (but one helluva lot cheaper!).
That might help the muscle/nerve pain but it won't do squat for the
tendonitis. I have a full set of air tools that I bought when both
forearms developed tendonitis so bad I could barely hold a screwdriver
much less turn it. Took a couple of years to get to the point I could
do much of anything without paying the price and 10 years later I
still have to watch myself to keep it from coming back.
On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
> >
> > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > something running, I tend to spray the carb bowls full of carb cleaner
> > as soon as I get there. Let them set for an hour or so (coupla beers)
> > then have at them. I found a cheap cleaner that is also a pretty fair
> > substitute for starting fluid which also helps.
> >
> > Ever notice that the heater quits at 10 below, the windshield wipers
> > work until it rains, and the darned thing absolutely knows when you
> > left the spare tire home?
> >
> > Any prognosis on the arm?
> >
> > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > LOL!
> > >
> > > I did know better that's for sure, but crap man I didn't want to have to
> > > try and remove the rad for a solder job at -25C just before going on a
> > > trip. I only have one arm that works these days so working on crap is a
> > > real pain in the butt among other places....
> > >
> > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > carb float needle yet so if I am careful/lucky I might get away with the
> > > hot water trip too. ;-)
> > >
> > > Mike
> > >
> > > Will Honea wrote:
> > > >
> > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > drain connector on your hot water heater in the house. Open the
> > > > drain, flush with warm hands, then find someplace to hide when the
> > > > wife figures out you used ALL the hot water.
> > > >
> > > > Sounds like the CJ is letting you know how it feels about being
> > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > better than that!
> > > >
> > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > wrote:
> > > >
> > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > can flush it....
> > > > >
> > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > boots and ski pants like now....
> > > > >
> > > > > I think I got the carb working again though. The float needle had built
> > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > gas seems to want to stay inside the carb where it belongs.
> > > > >
> > > > > Mike
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Interesting.
> > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > maybe reverse the hoses.
> > > > > > >
> > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > to 3000 rpm and I have heat.
> > > > > > >
> > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > >
> > > > > > > Mike
> > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > >
> > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > >
> > > > > > > > Hi Mike,
> > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > indicates an air pocket.
> > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > >
> > > > > > > > Mike Romain wrote:
> > > > > > > > >
> > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > something blocking the flow somehow.
> > > > > > > > >
> > > > > > > > > Mike
> > > >
> > > > --
> > > > Will Honea
> >
> > --
> > Will Honea
--
Will Honea
into is a form of shock treatment for the muscle/nerve problems.
After radiation therapy my jaws muscles would knot up something fierce
until my Dad had me try this little gizmo he had. In essence, it's
one of those piezio-electric igniters you see on barbeque grills and
gas appliances with a plunger and a big contact point on the end.
Darned thing will throw a half to three quarter inch spark but if you
set it right against the skin it just gives a little bump instead of
sparking. Anyway, I could put that up to the side of my face, pop it
3-4 times and the muscles would completely relax. Dad used it on his
back - same sort of damage you have but lower down and affected his
legs. It didn't work miracles for him but it sure helped a lot. In
fact, all of the 5 or 6 of those things I had have disappeared. My
DIL has MS and she swears by it to relieve the aches and muscle spasms
she suffers with that gawdawful nerve disease. If you would like to
try one, I'll dig up the mail order address for you. I think it was
$5-6 through one of the farm mailorder houses - postage cost as much
as the gadget. A lot of the benefit may be just snake oil but it
works on the same idea as the electro-shock therapy they use for
chronic pain cases (but one helluva lot cheaper!).
That might help the muscle/nerve pain but it won't do squat for the
tendonitis. I have a full set of air tools that I bought when both
forearms developed tendonitis so bad I could barely hold a screwdriver
much less turn it. Took a couple of years to get to the point I could
do much of anything without paying the price and 10 years later I
still have to watch myself to keep it from coming back.
On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
> >
> > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > something running, I tend to spray the carb bowls full of carb cleaner
> > as soon as I get there. Let them set for an hour or so (coupla beers)
> > then have at them. I found a cheap cleaner that is also a pretty fair
> > substitute for starting fluid which also helps.
> >
> > Ever notice that the heater quits at 10 below, the windshield wipers
> > work until it rains, and the darned thing absolutely knows when you
> > left the spare tire home?
> >
> > Any prognosis on the arm?
> >
> > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > LOL!
> > >
> > > I did know better that's for sure, but crap man I didn't want to have to
> > > try and remove the rad for a solder job at -25C just before going on a
> > > trip. I only have one arm that works these days so working on crap is a
> > > real pain in the butt among other places....
> > >
> > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > carb float needle yet so if I am careful/lucky I might get away with the
> > > hot water trip too. ;-)
> > >
> > > Mike
> > >
> > > Will Honea wrote:
> > > >
> > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > drain connector on your hot water heater in the house. Open the
> > > > drain, flush with warm hands, then find someplace to hide when the
> > > > wife figures out you used ALL the hot water.
> > > >
> > > > Sounds like the CJ is letting you know how it feels about being
> > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > better than that!
> > > >
> > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > wrote:
> > > >
> > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > can flush it....
> > > > >
> > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > boots and ski pants like now....
> > > > >
> > > > > I think I got the carb working again though. The float needle had built
> > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > gas seems to want to stay inside the carb where it belongs.
> > > > >
> > > > > Mike
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Interesting.
> > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > maybe reverse the hoses.
> > > > > > >
> > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > to 3000 rpm and I have heat.
> > > > > > >
> > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > >
> > > > > > > Mike
> > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > >
> > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > >
> > > > > > > > Hi Mike,
> > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > indicates an air pocket.
> > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > >
> > > > > > > > Mike Romain wrote:
> > > > > > > > >
> > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > something blocking the flow somehow.
> > > > > > > > >
> > > > > > > > > Mike
> > > >
> > > > --
> > > > Will Honea
> >
> > --
> > Will Honea
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Damn, I ache just reading about it. Something you might want to look
into is a form of shock treatment for the muscle/nerve problems.
After radiation therapy my jaws muscles would knot up something fierce
until my Dad had me try this little gizmo he had. In essence, it's
one of those piezio-electric igniters you see on barbeque grills and
gas appliances with a plunger and a big contact point on the end.
Darned thing will throw a half to three quarter inch spark but if you
set it right against the skin it just gives a little bump instead of
sparking. Anyway, I could put that up to the side of my face, pop it
3-4 times and the muscles would completely relax. Dad used it on his
back - same sort of damage you have but lower down and affected his
legs. It didn't work miracles for him but it sure helped a lot. In
fact, all of the 5 or 6 of those things I had have disappeared. My
DIL has MS and she swears by it to relieve the aches and muscle spasms
she suffers with that gawdawful nerve disease. If you would like to
try one, I'll dig up the mail order address for you. I think it was
$5-6 through one of the farm mailorder houses - postage cost as much
as the gadget. A lot of the benefit may be just snake oil but it
works on the same idea as the electro-shock therapy they use for
chronic pain cases (but one helluva lot cheaper!).
That might help the muscle/nerve pain but it won't do squat for the
tendonitis. I have a full set of air tools that I bought when both
forearms developed tendonitis so bad I could barely hold a screwdriver
much less turn it. Took a couple of years to get to the point I could
do much of anything without paying the price and 10 years later I
still have to watch myself to keep it from coming back.
On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
> >
> > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > something running, I tend to spray the carb bowls full of carb cleaner
> > as soon as I get there. Let them set for an hour or so (coupla beers)
> > then have at them. I found a cheap cleaner that is also a pretty fair
> > substitute for starting fluid which also helps.
> >
> > Ever notice that the heater quits at 10 below, the windshield wipers
> > work until it rains, and the darned thing absolutely knows when you
> > left the spare tire home?
> >
> > Any prognosis on the arm?
> >
> > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > LOL!
> > >
> > > I did know better that's for sure, but crap man I didn't want to have to
> > > try and remove the rad for a solder job at -25C just before going on a
> > > trip. I only have one arm that works these days so working on crap is a
> > > real pain in the butt among other places....
> > >
> > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > carb float needle yet so if I am careful/lucky I might get away with the
> > > hot water trip too. ;-)
> > >
> > > Mike
> > >
> > > Will Honea wrote:
> > > >
> > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > drain connector on your hot water heater in the house. Open the
> > > > drain, flush with warm hands, then find someplace to hide when the
> > > > wife figures out you used ALL the hot water.
> > > >
> > > > Sounds like the CJ is letting you know how it feels about being
> > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > better than that!
> > > >
> > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > wrote:
> > > >
> > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > can flush it....
> > > > >
> > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > boots and ski pants like now....
> > > > >
> > > > > I think I got the carb working again though. The float needle had built
> > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > gas seems to want to stay inside the carb where it belongs.
> > > > >
> > > > > Mike
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Interesting.
> > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > maybe reverse the hoses.
> > > > > > >
> > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > to 3000 rpm and I have heat.
> > > > > > >
> > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > >
> > > > > > > Mike
> > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > >
> > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > >
> > > > > > > > Hi Mike,
> > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > indicates an air pocket.
> > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > >
> > > > > > > > Mike Romain wrote:
> > > > > > > > >
> > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > something blocking the flow somehow.
> > > > > > > > >
> > > > > > > > > Mike
> > > >
> > > > --
> > > > Will Honea
> >
> > --
> > Will Honea
--
Will Honea
into is a form of shock treatment for the muscle/nerve problems.
After radiation therapy my jaws muscles would knot up something fierce
until my Dad had me try this little gizmo he had. In essence, it's
one of those piezio-electric igniters you see on barbeque grills and
gas appliances with a plunger and a big contact point on the end.
Darned thing will throw a half to three quarter inch spark but if you
set it right against the skin it just gives a little bump instead of
sparking. Anyway, I could put that up to the side of my face, pop it
3-4 times and the muscles would completely relax. Dad used it on his
back - same sort of damage you have but lower down and affected his
legs. It didn't work miracles for him but it sure helped a lot. In
fact, all of the 5 or 6 of those things I had have disappeared. My
DIL has MS and she swears by it to relieve the aches and muscle spasms
she suffers with that gawdawful nerve disease. If you would like to
try one, I'll dig up the mail order address for you. I think it was
$5-6 through one of the farm mailorder houses - postage cost as much
as the gadget. A lot of the benefit may be just snake oil but it
works on the same idea as the electro-shock therapy they use for
chronic pain cases (but one helluva lot cheaper!).
That might help the muscle/nerve pain but it won't do squat for the
tendonitis. I have a full set of air tools that I bought when both
forearms developed tendonitis so bad I could barely hold a screwdriver
much less turn it. Took a couple of years to get to the point I could
do much of anything without paying the price and 10 years later I
still have to watch myself to keep it from coming back.
On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> The CJ has been my daily driver, I just haven't driven very much
> lately. I am just going to try and give it some TLC and talk to it
> nice...
>
> My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> supraspinatus tendon with some other muscle damage and nerve root damage
> from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> if I put any stress on them or move my head the wrong way. Even the
> insurance company's doctor is saying I will never likely use it properly
> again. Ah well, in for a different set of physio doctors now so I will
> see what they can do.
>
> Mike
>
> Will Honea wrote:
> >
> > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > something running, I tend to spray the carb bowls full of carb cleaner
> > as soon as I get there. Let them set for an hour or so (coupla beers)
> > then have at them. I found a cheap cleaner that is also a pretty fair
> > substitute for starting fluid which also helps.
> >
> > Ever notice that the heater quits at 10 below, the windshield wipers
> > work until it rains, and the darned thing absolutely knows when you
> > left the spare tire home?
> >
> > Any prognosis on the arm?
> >
> > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > LOL!
> > >
> > > I did know better that's for sure, but crap man I didn't want to have to
> > > try and remove the rad for a solder job at -25C just before going on a
> > > trip. I only have one arm that works these days so working on crap is a
> > > real pain in the butt among other places....
> > >
> > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > carb float needle yet so if I am careful/lucky I might get away with the
> > > hot water trip too. ;-)
> > >
> > > Mike
> > >
> > > Will Honea wrote:
> > > >
> > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > drain connector on your hot water heater in the house. Open the
> > > > drain, flush with warm hands, then find someplace to hide when the
> > > > wife figures out you used ALL the hot water.
> > > >
> > > > Sounds like the CJ is letting you know how it feels about being
> > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > better than that!
> > > >
> > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > wrote:
> > > >
> > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > can flush it....
> > > > >
> > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > boots and ski pants like now....
> > > > >
> > > > > I think I got the carb working again though. The float needle had built
> > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > gas seems to want to stay inside the carb where it belongs.
> > > > >
> > > > > Mike
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Interesting.
> > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > maybe reverse the hoses.
> > > > > > >
> > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > to 3000 rpm and I have heat.
> > > > > > >
> > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > >
> > > > > > > Mike
> > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > >
> > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > >
> > > > > > > > Hi Mike,
> > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > indicates an air pocket.
> > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > >
> > > > > > > > Mike Romain wrote:
> > > > > > > > >
> > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > something blocking the flow somehow.
> > > > > > > > >
> > > > > > > > > Mike
> > > >
> > > > --
> > > > Will Honea
> >
> > --
> > Will Honea
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
It is miserable when all the muscles are in freaking knots. Physio has
had me on this electro therapy torture machine, don't think it helped
much. They just gave me one for home I haven't tried yet so we will
see...
Thanks.
Mike
Will Honea wrote:
>
> Damn, I ache just reading about it. Something you might want to look
> into is a form of shock treatment for the muscle/nerve problems.
> After radiation therapy my jaws muscles would knot up something fierce
> until my Dad had me try this little gizmo he had. In essence, it's
> one of those piezio-electric igniters you see on barbeque grills and
> gas appliances with a plunger and a big contact point on the end.
> Darned thing will throw a half to three quarter inch spark but if you
> set it right against the skin it just gives a little bump instead of
> sparking. Anyway, I could put that up to the side of my face, pop it
> 3-4 times and the muscles would completely relax. Dad used it on his
> back - same sort of damage you have but lower down and affected his
> legs. It didn't work miracles for him but it sure helped a lot. In
> fact, all of the 5 or 6 of those things I had have disappeared. My
> DIL has MS and she swears by it to relieve the aches and muscle spasms
> she suffers with that gawdawful nerve disease. If you would like to
> try one, I'll dig up the mail order address for you. I think it was
> $5-6 through one of the farm mailorder houses - postage cost as much
> as the gadget. A lot of the benefit may be just snake oil but it
> works on the same idea as the electro-shock therapy they use for
> chronic pain cases (but one helluva lot cheaper!).
>
> That might help the muscle/nerve pain but it won't do squat for the
> tendonitis. I have a full set of air tools that I bought when both
> forearms developed tendonitis so bad I could barely hold a screwdriver
> much less turn it. Took a couple of years to get to the point I could
> do much of anything without paying the price and 10 years later I
> still have to watch myself to keep it from coming back.
>
> On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > The CJ has been my daily driver, I just haven't driven very much
> > lately. I am just going to try and give it some TLC and talk to it
> > nice...
> >
> > My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> > supraspinatus tendon with some other muscle damage and nerve root damage
> > from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> > if I put any stress on them or move my head the wrong way. Even the
> > insurance company's doctor is saying I will never likely use it properly
> > again. Ah well, in for a different set of physio doctors now so I will
> > see what they can do.
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > > something running, I tend to spray the carb bowls full of carb cleaner
> > > as soon as I get there. Let them set for an hour or so (coupla beers)
> > > then have at them. I found a cheap cleaner that is also a pretty fair
> > > substitute for starting fluid which also helps.
> > >
> > > Ever notice that the heater quits at 10 below, the windshield wipers
> > > work until it rains, and the darned thing absolutely knows when you
> > > left the spare tire home?
> > >
> > > Any prognosis on the arm?
> > >
> > > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > LOL!
> > > >
> > > > I did know better that's for sure, but crap man I didn't want to have to
> > > > try and remove the rad for a solder job at -25C just before going on a
> > > > trip. I only have one arm that works these days so working on crap is a
> > > > real pain in the butt among other places....
> > > >
> > > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > > carb float needle yet so if I am careful/lucky I might get away with the
> > > > hot water trip too. ;-)
> > > >
> > > > Mike
> > > >
> > > > Will Honea wrote:
> > > > >
> > > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > > drain connector on your hot water heater in the house. Open the
> > > > > drain, flush with warm hands, then find someplace to hide when the
> > > > > wife figures out you used ALL the hot water.
> > > > >
> > > > > Sounds like the CJ is letting you know how it feels about being
> > > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > > better than that!
> > > > >
> > > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > > wrote:
> > > > >
> > > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > > can flush it....
> > > > > >
> > > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > > boots and ski pants like now....
> > > > > >
> > > > > > I think I got the carb working again though. The float needle had built
> > > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > > gas seems to want to stay inside the carb where it belongs.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Interesting.
> > > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > > maybe reverse the hoses.
> > > > > > > >
> > > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > > to 3000 rpm and I have heat.
> > > > > > > >
> > > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > > >
> > > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > > >
> > > > > > > > > Hi Mike,
> > > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > > indicates an air pocket.
> > > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > > >
> > > > > > > > > Mike Romain wrote:
> > > > > > > > > >
> > > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > > something blocking the flow somehow.
> > > > > > > > > >
> > > > > > > > > > Mike
> > > > >
> > > > > --
> > > > > Will Honea
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
had me on this electro therapy torture machine, don't think it helped
much. They just gave me one for home I haven't tried yet so we will
see...
Thanks.
Mike
Will Honea wrote:
>
> Damn, I ache just reading about it. Something you might want to look
> into is a form of shock treatment for the muscle/nerve problems.
> After radiation therapy my jaws muscles would knot up something fierce
> until my Dad had me try this little gizmo he had. In essence, it's
> one of those piezio-electric igniters you see on barbeque grills and
> gas appliances with a plunger and a big contact point on the end.
> Darned thing will throw a half to three quarter inch spark but if you
> set it right against the skin it just gives a little bump instead of
> sparking. Anyway, I could put that up to the side of my face, pop it
> 3-4 times and the muscles would completely relax. Dad used it on his
> back - same sort of damage you have but lower down and affected his
> legs. It didn't work miracles for him but it sure helped a lot. In
> fact, all of the 5 or 6 of those things I had have disappeared. My
> DIL has MS and she swears by it to relieve the aches and muscle spasms
> she suffers with that gawdawful nerve disease. If you would like to
> try one, I'll dig up the mail order address for you. I think it was
> $5-6 through one of the farm mailorder houses - postage cost as much
> as the gadget. A lot of the benefit may be just snake oil but it
> works on the same idea as the electro-shock therapy they use for
> chronic pain cases (but one helluva lot cheaper!).
>
> That might help the muscle/nerve pain but it won't do squat for the
> tendonitis. I have a full set of air tools that I bought when both
> forearms developed tendonitis so bad I could barely hold a screwdriver
> much less turn it. Took a couple of years to get to the point I could
> do much of anything without paying the price and 10 years later I
> still have to watch myself to keep it from coming back.
>
> On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > The CJ has been my daily driver, I just haven't driven very much
> > lately. I am just going to try and give it some TLC and talk to it
> > nice...
> >
> > My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> > supraspinatus tendon with some other muscle damage and nerve root damage
> > from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> > if I put any stress on them or move my head the wrong way. Even the
> > insurance company's doctor is saying I will never likely use it properly
> > again. Ah well, in for a different set of physio doctors now so I will
> > see what they can do.
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > > something running, I tend to spray the carb bowls full of carb cleaner
> > > as soon as I get there. Let them set for an hour or so (coupla beers)
> > > then have at them. I found a cheap cleaner that is also a pretty fair
> > > substitute for starting fluid which also helps.
> > >
> > > Ever notice that the heater quits at 10 below, the windshield wipers
> > > work until it rains, and the darned thing absolutely knows when you
> > > left the spare tire home?
> > >
> > > Any prognosis on the arm?
> > >
> > > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > LOL!
> > > >
> > > > I did know better that's for sure, but crap man I didn't want to have to
> > > > try and remove the rad for a solder job at -25C just before going on a
> > > > trip. I only have one arm that works these days so working on crap is a
> > > > real pain in the butt among other places....
> > > >
> > > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > > carb float needle yet so if I am careful/lucky I might get away with the
> > > > hot water trip too. ;-)
> > > >
> > > > Mike
> > > >
> > > > Will Honea wrote:
> > > > >
> > > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > > drain connector on your hot water heater in the house. Open the
> > > > > drain, flush with warm hands, then find someplace to hide when the
> > > > > wife figures out you used ALL the hot water.
> > > > >
> > > > > Sounds like the CJ is letting you know how it feels about being
> > > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > > better than that!
> > > > >
> > > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > > wrote:
> > > > >
> > > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > > can flush it....
> > > > > >
> > > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > > boots and ski pants like now....
> > > > > >
> > > > > > I think I got the carb working again though. The float needle had built
> > > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > > gas seems to want to stay inside the carb where it belongs.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Interesting.
> > > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > > maybe reverse the hoses.
> > > > > > > >
> > > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > > to 3000 rpm and I have heat.
> > > > > > > >
> > > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > > >
> > > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > > >
> > > > > > > > > Hi Mike,
> > > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > > indicates an air pocket.
> > > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > > >
> > > > > > > > > Mike Romain wrote:
> > > > > > > > > >
> > > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > > something blocking the flow somehow.
> > > > > > > > > >
> > > > > > > > > > Mike
> > > > >
> > > > > --
> > > > > Will Honea
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
It is miserable when all the muscles are in freaking knots. Physio has
had me on this electro therapy torture machine, don't think it helped
much. They just gave me one for home I haven't tried yet so we will
see...
Thanks.
Mike
Will Honea wrote:
>
> Damn, I ache just reading about it. Something you might want to look
> into is a form of shock treatment for the muscle/nerve problems.
> After radiation therapy my jaws muscles would knot up something fierce
> until my Dad had me try this little gizmo he had. In essence, it's
> one of those piezio-electric igniters you see on barbeque grills and
> gas appliances with a plunger and a big contact point on the end.
> Darned thing will throw a half to three quarter inch spark but if you
> set it right against the skin it just gives a little bump instead of
> sparking. Anyway, I could put that up to the side of my face, pop it
> 3-4 times and the muscles would completely relax. Dad used it on his
> back - same sort of damage you have but lower down and affected his
> legs. It didn't work miracles for him but it sure helped a lot. In
> fact, all of the 5 or 6 of those things I had have disappeared. My
> DIL has MS and she swears by it to relieve the aches and muscle spasms
> she suffers with that gawdawful nerve disease. If you would like to
> try one, I'll dig up the mail order address for you. I think it was
> $5-6 through one of the farm mailorder houses - postage cost as much
> as the gadget. A lot of the benefit may be just snake oil but it
> works on the same idea as the electro-shock therapy they use for
> chronic pain cases (but one helluva lot cheaper!).
>
> That might help the muscle/nerve pain but it won't do squat for the
> tendonitis. I have a full set of air tools that I bought when both
> forearms developed tendonitis so bad I could barely hold a screwdriver
> much less turn it. Took a couple of years to get to the point I could
> do much of anything without paying the price and 10 years later I
> still have to watch myself to keep it from coming back.
>
> On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > The CJ has been my daily driver, I just haven't driven very much
> > lately. I am just going to try and give it some TLC and talk to it
> > nice...
> >
> > My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> > supraspinatus tendon with some other muscle damage and nerve root damage
> > from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> > if I put any stress on them or move my head the wrong way. Even the
> > insurance company's doctor is saying I will never likely use it properly
> > again. Ah well, in for a different set of physio doctors now so I will
> > see what they can do.
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > > something running, I tend to spray the carb bowls full of carb cleaner
> > > as soon as I get there. Let them set for an hour or so (coupla beers)
> > > then have at them. I found a cheap cleaner that is also a pretty fair
> > > substitute for starting fluid which also helps.
> > >
> > > Ever notice that the heater quits at 10 below, the windshield wipers
> > > work until it rains, and the darned thing absolutely knows when you
> > > left the spare tire home?
> > >
> > > Any prognosis on the arm?
> > >
> > > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > LOL!
> > > >
> > > > I did know better that's for sure, but crap man I didn't want to have to
> > > > try and remove the rad for a solder job at -25C just before going on a
> > > > trip. I only have one arm that works these days so working on crap is a
> > > > real pain in the butt among other places....
> > > >
> > > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > > carb float needle yet so if I am careful/lucky I might get away with the
> > > > hot water trip too. ;-)
> > > >
> > > > Mike
> > > >
> > > > Will Honea wrote:
> > > > >
> > > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > > drain connector on your hot water heater in the house. Open the
> > > > > drain, flush with warm hands, then find someplace to hide when the
> > > > > wife figures out you used ALL the hot water.
> > > > >
> > > > > Sounds like the CJ is letting you know how it feels about being
> > > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > > better than that!
> > > > >
> > > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > > wrote:
> > > > >
> > > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > > can flush it....
> > > > > >
> > > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > > boots and ski pants like now....
> > > > > >
> > > > > > I think I got the carb working again though. The float needle had built
> > > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > > gas seems to want to stay inside the carb where it belongs.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Interesting.
> > > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > > maybe reverse the hoses.
> > > > > > > >
> > > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > > to 3000 rpm and I have heat.
> > > > > > > >
> > > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > > >
> > > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > > >
> > > > > > > > > Hi Mike,
> > > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > > indicates an air pocket.
> > > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > > >
> > > > > > > > > Mike Romain wrote:
> > > > > > > > > >
> > > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > > something blocking the flow somehow.
> > > > > > > > > >
> > > > > > > > > > Mike
> > > > >
> > > > > --
> > > > > Will Honea
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
had me on this electro therapy torture machine, don't think it helped
much. They just gave me one for home I haven't tried yet so we will
see...
Thanks.
Mike
Will Honea wrote:
>
> Damn, I ache just reading about it. Something you might want to look
> into is a form of shock treatment for the muscle/nerve problems.
> After radiation therapy my jaws muscles would knot up something fierce
> until my Dad had me try this little gizmo he had. In essence, it's
> one of those piezio-electric igniters you see on barbeque grills and
> gas appliances with a plunger and a big contact point on the end.
> Darned thing will throw a half to three quarter inch spark but if you
> set it right against the skin it just gives a little bump instead of
> sparking. Anyway, I could put that up to the side of my face, pop it
> 3-4 times and the muscles would completely relax. Dad used it on his
> back - same sort of damage you have but lower down and affected his
> legs. It didn't work miracles for him but it sure helped a lot. In
> fact, all of the 5 or 6 of those things I had have disappeared. My
> DIL has MS and she swears by it to relieve the aches and muscle spasms
> she suffers with that gawdawful nerve disease. If you would like to
> try one, I'll dig up the mail order address for you. I think it was
> $5-6 through one of the farm mailorder houses - postage cost as much
> as the gadget. A lot of the benefit may be just snake oil but it
> works on the same idea as the electro-shock therapy they use for
> chronic pain cases (but one helluva lot cheaper!).
>
> That might help the muscle/nerve pain but it won't do squat for the
> tendonitis. I have a full set of air tools that I bought when both
> forearms developed tendonitis so bad I could barely hold a screwdriver
> much less turn it. Took a couple of years to get to the point I could
> do much of anything without paying the price and 10 years later I
> still have to watch myself to keep it from coming back.
>
> On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > The CJ has been my daily driver, I just haven't driven very much
> > lately. I am just going to try and give it some TLC and talk to it
> > nice...
> >
> > My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> > supraspinatus tendon with some other muscle damage and nerve root damage
> > from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> > if I put any stress on them or move my head the wrong way. Even the
> > insurance company's doctor is saying I will never likely use it properly
> > again. Ah well, in for a different set of physio doctors now so I will
> > see what they can do.
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > > something running, I tend to spray the carb bowls full of carb cleaner
> > > as soon as I get there. Let them set for an hour or so (coupla beers)
> > > then have at them. I found a cheap cleaner that is also a pretty fair
> > > substitute for starting fluid which also helps.
> > >
> > > Ever notice that the heater quits at 10 below, the windshield wipers
> > > work until it rains, and the darned thing absolutely knows when you
> > > left the spare tire home?
> > >
> > > Any prognosis on the arm?
> > >
> > > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > LOL!
> > > >
> > > > I did know better that's for sure, but crap man I didn't want to have to
> > > > try and remove the rad for a solder job at -25C just before going on a
> > > > trip. I only have one arm that works these days so working on crap is a
> > > > real pain in the butt among other places....
> > > >
> > > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > > carb float needle yet so if I am careful/lucky I might get away with the
> > > > hot water trip too. ;-)
> > > >
> > > > Mike
> > > >
> > > > Will Honea wrote:
> > > > >
> > > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > > drain connector on your hot water heater in the house. Open the
> > > > > drain, flush with warm hands, then find someplace to hide when the
> > > > > wife figures out you used ALL the hot water.
> > > > >
> > > > > Sounds like the CJ is letting you know how it feels about being
> > > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > > better than that!
> > > > >
> > > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > > wrote:
> > > > >
> > > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > > can flush it....
> > > > > >
> > > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > > boots and ski pants like now....
> > > > > >
> > > > > > I think I got the carb working again though. The float needle had built
> > > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > > gas seems to want to stay inside the carb where it belongs.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Interesting.
> > > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > > maybe reverse the hoses.
> > > > > > > >
> > > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > > to 3000 rpm and I have heat.
> > > > > > > >
> > > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > > >
> > > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > > >
> > > > > > > > > Hi Mike,
> > > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > > indicates an air pocket.
> > > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > > >
> > > > > > > > > Mike Romain wrote:
> > > > > > > > > >
> > > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > > something blocking the flow somehow.
> > > > > > > > > >
> > > > > > > > > > Mike
> > > > >
> > > > > --
> > > > > Will Honea
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
It is miserable when all the muscles are in freaking knots. Physio has
had me on this electro therapy torture machine, don't think it helped
much. They just gave me one for home I haven't tried yet so we will
see...
Thanks.
Mike
Will Honea wrote:
>
> Damn, I ache just reading about it. Something you might want to look
> into is a form of shock treatment for the muscle/nerve problems.
> After radiation therapy my jaws muscles would knot up something fierce
> until my Dad had me try this little gizmo he had. In essence, it's
> one of those piezio-electric igniters you see on barbeque grills and
> gas appliances with a plunger and a big contact point on the end.
> Darned thing will throw a half to three quarter inch spark but if you
> set it right against the skin it just gives a little bump instead of
> sparking. Anyway, I could put that up to the side of my face, pop it
> 3-4 times and the muscles would completely relax. Dad used it on his
> back - same sort of damage you have but lower down and affected his
> legs. It didn't work miracles for him but it sure helped a lot. In
> fact, all of the 5 or 6 of those things I had have disappeared. My
> DIL has MS and she swears by it to relieve the aches and muscle spasms
> she suffers with that gawdawful nerve disease. If you would like to
> try one, I'll dig up the mail order address for you. I think it was
> $5-6 through one of the farm mailorder houses - postage cost as much
> as the gadget. A lot of the benefit may be just snake oil but it
> works on the same idea as the electro-shock therapy they use for
> chronic pain cases (but one helluva lot cheaper!).
>
> That might help the muscle/nerve pain but it won't do squat for the
> tendonitis. I have a full set of air tools that I bought when both
> forearms developed tendonitis so bad I could barely hold a screwdriver
> much less turn it. Took a couple of years to get to the point I could
> do much of anything without paying the price and 10 years later I
> still have to watch myself to keep it from coming back.
>
> On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > The CJ has been my daily driver, I just haven't driven very much
> > lately. I am just going to try and give it some TLC and talk to it
> > nice...
> >
> > My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> > supraspinatus tendon with some other muscle damage and nerve root damage
> > from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> > if I put any stress on them or move my head the wrong way. Even the
> > insurance company's doctor is saying I will never likely use it properly
> > again. Ah well, in for a different set of physio doctors now so I will
> > see what they can do.
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > > something running, I tend to spray the carb bowls full of carb cleaner
> > > as soon as I get there. Let them set for an hour or so (coupla beers)
> > > then have at them. I found a cheap cleaner that is also a pretty fair
> > > substitute for starting fluid which also helps.
> > >
> > > Ever notice that the heater quits at 10 below, the windshield wipers
> > > work until it rains, and the darned thing absolutely knows when you
> > > left the spare tire home?
> > >
> > > Any prognosis on the arm?
> > >
> > > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > LOL!
> > > >
> > > > I did know better that's for sure, but crap man I didn't want to have to
> > > > try and remove the rad for a solder job at -25C just before going on a
> > > > trip. I only have one arm that works these days so working on crap is a
> > > > real pain in the butt among other places....
> > > >
> > > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > > carb float needle yet so if I am careful/lucky I might get away with the
> > > > hot water trip too. ;-)
> > > >
> > > > Mike
> > > >
> > > > Will Honea wrote:
> > > > >
> > > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > > drain connector on your hot water heater in the house. Open the
> > > > > drain, flush with warm hands, then find someplace to hide when the
> > > > > wife figures out you used ALL the hot water.
> > > > >
> > > > > Sounds like the CJ is letting you know how it feels about being
> > > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > > better than that!
> > > > >
> > > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > > wrote:
> > > > >
> > > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > > can flush it....
> > > > > >
> > > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > > boots and ski pants like now....
> > > > > >
> > > > > > I think I got the carb working again though. The float needle had built
> > > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > > gas seems to want to stay inside the carb where it belongs.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Interesting.
> > > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > > maybe reverse the hoses.
> > > > > > > >
> > > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > > to 3000 rpm and I have heat.
> > > > > > > >
> > > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > > >
> > > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > > >
> > > > > > > > > Hi Mike,
> > > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > > indicates an air pocket.
> > > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > > >
> > > > > > > > > Mike Romain wrote:
> > > > > > > > > >
> > > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > > something blocking the flow somehow.
> > > > > > > > > >
> > > > > > > > > > Mike
> > > > >
> > > > > --
> > > > > Will Honea
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
had me on this electro therapy torture machine, don't think it helped
much. They just gave me one for home I haven't tried yet so we will
see...
Thanks.
Mike
Will Honea wrote:
>
> Damn, I ache just reading about it. Something you might want to look
> into is a form of shock treatment for the muscle/nerve problems.
> After radiation therapy my jaws muscles would knot up something fierce
> until my Dad had me try this little gizmo he had. In essence, it's
> one of those piezio-electric igniters you see on barbeque grills and
> gas appliances with a plunger and a big contact point on the end.
> Darned thing will throw a half to three quarter inch spark but if you
> set it right against the skin it just gives a little bump instead of
> sparking. Anyway, I could put that up to the side of my face, pop it
> 3-4 times and the muscles would completely relax. Dad used it on his
> back - same sort of damage you have but lower down and affected his
> legs. It didn't work miracles for him but it sure helped a lot. In
> fact, all of the 5 or 6 of those things I had have disappeared. My
> DIL has MS and she swears by it to relieve the aches and muscle spasms
> she suffers with that gawdawful nerve disease. If you would like to
> try one, I'll dig up the mail order address for you. I think it was
> $5-6 through one of the farm mailorder houses - postage cost as much
> as the gadget. A lot of the benefit may be just snake oil but it
> works on the same idea as the electro-shock therapy they use for
> chronic pain cases (but one helluva lot cheaper!).
>
> That might help the muscle/nerve pain but it won't do squat for the
> tendonitis. I have a full set of air tools that I bought when both
> forearms developed tendonitis so bad I could barely hold a screwdriver
> much less turn it. Took a couple of years to get to the point I could
> do much of anything without paying the price and 10 years later I
> still have to watch myself to keep it from coming back.
>
> On Fri, 18 Mar 2005 14:24:28 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > The CJ has been my daily driver, I just haven't driven very much
> > lately. I am just going to try and give it some TLC and talk to it
> > nice...
> >
> > My arm/shoulder seems screwed unfortunately. I have tendonosis in the
> > supraspinatus tendon with some other muscle damage and nerve root damage
> > from 3 compressed vertabra/disk sets that turns the muscles to bad knots
> > if I put any stress on them or move my head the wrong way. Even the
> > insurance company's doctor is saying I will never likely use it properly
> > again. Ah well, in for a different set of physio doctors now so I will
> > see what they can do.
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > I'm lazy, so when I'm on the farm or out at the cabin and need to get
> > > something running, I tend to spray the carb bowls full of carb cleaner
> > > as soon as I get there. Let them set for an hour or so (coupla beers)
> > > then have at them. I found a cheap cleaner that is also a pretty fair
> > > substitute for starting fluid which also helps.
> > >
> > > Ever notice that the heater quits at 10 below, the windshield wipers
> > > work until it rains, and the darned thing absolutely knows when you
> > > left the spare tire home?
> > >
> > > Any prognosis on the arm?
> > >
> > > On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > LOL!
> > > >
> > > > I did know better that's for sure, but crap man I didn't want to have to
> > > > try and remove the rad for a solder job at -25C just before going on a
> > > > trip. I only have one arm that works these days so working on crap is a
> > > > real pain in the butt among other places....
> > > >
> > > > Oh and my wife hasn't noticed the emery board I used to polish up the
> > > > carb float needle yet so if I am careful/lucky I might get away with the
> > > > hot water trip too. ;-)
> > > >
> > > > Mike
> > > >
> > > > Will Honea wrote:
> > > > >
> > > > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > > > drain connector on your hot water heater in the house. Open the
> > > > > drain, flush with warm hands, then find someplace to hide when the
> > > > > wife figures out you used ALL the hot water.
> > > > >
> > > > > Sounds like the CJ is letting you know how it feels about being
> > > > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > > > better than that!
> > > > >
> > > > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > > > wrote:
> > > > >
> > > > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > > > can flush it....
> > > > > >
> > > > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > > > money to have a heated garage flush the core. It was flushed last fall
> > > > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > > > boots and ski pants like now....
> > > > > >
> > > > > > I think I got the carb working again though. The float needle had built
> > > > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > > > gas seems to want to stay inside the carb where it belongs.
> > > > > >
> > > > > > Mike
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Interesting.
> > > > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > > > thought were well maintained. Just used the garden hose and back
> > > > > > > flushed, and they went for no heat to having to turn it down.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > > > maybe reverse the hoses.
> > > > > > > >
> > > > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > > > to 3000 rpm and I have heat.
> > > > > > > >
> > > > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > > > >
> > > > > > > > Mike
> > > > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > > > 88 Cherokee 235 BFG AT's
> > > > > > > >
> > > > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > > > >
> > > > > > > > > Hi Mike,
> > > > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > > > indicates an air pocket.
> > > > > > > > > God Bless America, ßill O|||||||O
> > > > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > > > >
> > > > > > > > > Mike Romain wrote:
> > > > > > > > > >
> > > > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > > > something blocking the flow somehow.
> > > > > > > > > >
> > > > > > > > > > Mike
> > > > >
> > > > > --
> > > > > Will Honea
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
