My CJ7 is having fits on me!
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Mike, if push comes to shove go buy a cheap hose and screw it onto the
drain connector on your hot water heater in the house. Open the
drain, flush with warm hands, then find someplace to hide when the
wife figures out you used ALL the hot water.
Sounds like the CJ is letting you know how it feels about being
ignored. And you can always remind yourself about Stop-Leak: I KNEW
better than that!
On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> Well ya know, my hose is currently imbedded in a block of ice that goes
> down to bedrock so I am going to have to wait for a few weeks before I
> can flush it....
>
> Maybe a new pump will have the power to clear it or I have to go spend
> money to have a heated garage flush the core. It was flushed last fall
> and I had wicked heat, didn't even need a coat on, let alone gloves and
> boots and ski pants like now....
>
> I think I got the carb working again though. The float needle had built
> up varnish crap on one of it's 3 slider rails. I polished it up and the
> gas seems to want to stay inside the carb where it belongs.
>
> Mike
>
> "L.W.(ßill) ------ III" wrote:
> >
> > Hi Mike,
> > Interesting.
> > All though, I have found a lot of clogged heater cores, on cars I
> > thought were well maintained. Just used the garden hose and back
> > flushed, and they went for no heat to having to turn it down.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> > >
> > > I believe the slow flow out of the pump allowed all the stop leak to
> > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > maybe reverse the hoses.
> > >
> > > When it heated up with the cap off, it flowed backward for a while from
> > > what appeared to be convection flow out the block via the lower hose and
> > > only went forward out the top hose when I revved it up to 3000 or so.
> > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > to 3000 rpm and I have heat.
> > >
> > > Bottom rad hose is new and has a spring in it so no collapse there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > pump on their Model "T". I was just guessing by the heater not working
> > > > indicates an air pocket.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > something blocking the flow somehow.
> > > > >
> > > > > Mike
--
Will Honea
drain connector on your hot water heater in the house. Open the
drain, flush with warm hands, then find someplace to hide when the
wife figures out you used ALL the hot water.
Sounds like the CJ is letting you know how it feels about being
ignored. And you can always remind yourself about Stop-Leak: I KNEW
better than that!
On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> Well ya know, my hose is currently imbedded in a block of ice that goes
> down to bedrock so I am going to have to wait for a few weeks before I
> can flush it....
>
> Maybe a new pump will have the power to clear it or I have to go spend
> money to have a heated garage flush the core. It was flushed last fall
> and I had wicked heat, didn't even need a coat on, let alone gloves and
> boots and ski pants like now....
>
> I think I got the carb working again though. The float needle had built
> up varnish crap on one of it's 3 slider rails. I polished it up and the
> gas seems to want to stay inside the carb where it belongs.
>
> Mike
>
> "L.W.(ßill) ------ III" wrote:
> >
> > Hi Mike,
> > Interesting.
> > All though, I have found a lot of clogged heater cores, on cars I
> > thought were well maintained. Just used the garden hose and back
> > flushed, and they went for no heat to having to turn it down.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> > >
> > > I believe the slow flow out of the pump allowed all the stop leak to
> > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > maybe reverse the hoses.
> > >
> > > When it heated up with the cap off, it flowed backward for a while from
> > > what appeared to be convection flow out the block via the lower hose and
> > > only went forward out the top hose when I revved it up to 3000 or so.
> > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > to 3000 rpm and I have heat.
> > >
> > > Bottom rad hose is new and has a spring in it so no collapse there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > pump on their Model "T". I was just guessing by the heater not working
> > > > indicates an air pocket.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > something blocking the flow somehow.
> > > > >
> > > > > Mike
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
Mike, if push comes to shove go buy a cheap hose and screw it onto the
drain connector on your hot water heater in the house. Open the
drain, flush with warm hands, then find someplace to hide when the
wife figures out you used ALL the hot water.
Sounds like the CJ is letting you know how it feels about being
ignored. And you can always remind yourself about Stop-Leak: I KNEW
better than that!
On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> Well ya know, my hose is currently imbedded in a block of ice that goes
> down to bedrock so I am going to have to wait for a few weeks before I
> can flush it....
>
> Maybe a new pump will have the power to clear it or I have to go spend
> money to have a heated garage flush the core. It was flushed last fall
> and I had wicked heat, didn't even need a coat on, let alone gloves and
> boots and ski pants like now....
>
> I think I got the carb working again though. The float needle had built
> up varnish crap on one of it's 3 slider rails. I polished it up and the
> gas seems to want to stay inside the carb where it belongs.
>
> Mike
>
> "L.W.(ßill) ------ III" wrote:
> >
> > Hi Mike,
> > Interesting.
> > All though, I have found a lot of clogged heater cores, on cars I
> > thought were well maintained. Just used the garden hose and back
> > flushed, and they went for no heat to having to turn it down.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> > >
> > > I believe the slow flow out of the pump allowed all the stop leak to
> > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > maybe reverse the hoses.
> > >
> > > When it heated up with the cap off, it flowed backward for a while from
> > > what appeared to be convection flow out the block via the lower hose and
> > > only went forward out the top hose when I revved it up to 3000 or so.
> > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > to 3000 rpm and I have heat.
> > >
> > > Bottom rad hose is new and has a spring in it so no collapse there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > pump on their Model "T". I was just guessing by the heater not working
> > > > indicates an air pocket.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > something blocking the flow somehow.
> > > > >
> > > > > Mike
--
Will Honea
drain connector on your hot water heater in the house. Open the
drain, flush with warm hands, then find someplace to hide when the
wife figures out you used ALL the hot water.
Sounds like the CJ is letting you know how it feels about being
ignored. And you can always remind yourself about Stop-Leak: I KNEW
better than that!
On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> Well ya know, my hose is currently imbedded in a block of ice that goes
> down to bedrock so I am going to have to wait for a few weeks before I
> can flush it....
>
> Maybe a new pump will have the power to clear it or I have to go spend
> money to have a heated garage flush the core. It was flushed last fall
> and I had wicked heat, didn't even need a coat on, let alone gloves and
> boots and ski pants like now....
>
> I think I got the carb working again though. The float needle had built
> up varnish crap on one of it's 3 slider rails. I polished it up and the
> gas seems to want to stay inside the carb where it belongs.
>
> Mike
>
> "L.W.(ßill) ------ III" wrote:
> >
> > Hi Mike,
> > Interesting.
> > All though, I have found a lot of clogged heater cores, on cars I
> > thought were well maintained. Just used the garden hose and back
> > flushed, and they went for no heat to having to turn it down.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > Mike Romain wrote:
> > >
> > > I believe the slow flow out of the pump allowed all the stop leak to
> > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > maybe reverse the hoses.
> > >
> > > When it heated up with the cap off, it flowed backward for a while from
> > > what appeared to be convection flow out the block via the lower hose and
> > > only went forward out the top hose when I revved it up to 3000 or so.
> > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > to 3000 rpm and I have heat.
> > >
> > > Bottom rad hose is new and has a spring in it so no collapse there.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > pump on their Model "T". I was just guessing by the heater not working
> > > > indicates an air pocket.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > something blocking the flow somehow.
> > > > >
> > > > > Mike
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
LOL!
I did know better that's for sure, but crap man I didn't want to have to
try and remove the rad for a solder job at -25C just before going on a
trip. I only have one arm that works these days so working on crap is a
real pain in the butt among other places....
Oh and my wife hasn't noticed the emery board I used to polish up the
carb float needle yet so if I am careful/lucky I might get away with the
hot water trip too. ;-)
Mike
Will Honea wrote:
>
> Mike, if push comes to shove go buy a cheap hose and screw it onto the
> drain connector on your hot water heater in the house. Open the
> drain, flush with warm hands, then find someplace to hide when the
> wife figures out you used ALL the hot water.
>
> Sounds like the CJ is letting you know how it feels about being
> ignored. And you can always remind yourself about Stop-Leak: I KNEW
> better than that!
>
> On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > Well ya know, my hose is currently imbedded in a block of ice that goes
> > down to bedrock so I am going to have to wait for a few weeks before I
> > can flush it....
> >
> > Maybe a new pump will have the power to clear it or I have to go spend
> > money to have a heated garage flush the core. It was flushed last fall
> > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > boots and ski pants like now....
> >
> > I think I got the carb working again though. The float needle had built
> > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > gas seems to want to stay inside the carb where it belongs.
> >
> > Mike
> >
> > "L.W.(ßill) ------ III" wrote:
> > >
> > > Hi Mike,
> > > Interesting.
> > > All though, I have found a lot of clogged heater cores, on cars I
> > > thought were well maintained. Just used the garden hose and back
> > > flushed, and they went for no heat to having to turn it down.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > maybe reverse the hoses.
> > > >
> > > > When it heated up with the cap off, it flowed backward for a while from
> > > > what appeared to be convection flow out the block via the lower hose and
> > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > to 3000 rpm and I have heat.
> > > >
> > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > indicates an air pocket.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > something blocking the flow somehow.
> > > > > >
> > > > > > Mike
>
> --
> Will Honea
I did know better that's for sure, but crap man I didn't want to have to
try and remove the rad for a solder job at -25C just before going on a
trip. I only have one arm that works these days so working on crap is a
real pain in the butt among other places....
Oh and my wife hasn't noticed the emery board I used to polish up the
carb float needle yet so if I am careful/lucky I might get away with the
hot water trip too. ;-)
Mike
Will Honea wrote:
>
> Mike, if push comes to shove go buy a cheap hose and screw it onto the
> drain connector on your hot water heater in the house. Open the
> drain, flush with warm hands, then find someplace to hide when the
> wife figures out you used ALL the hot water.
>
> Sounds like the CJ is letting you know how it feels about being
> ignored. And you can always remind yourself about Stop-Leak: I KNEW
> better than that!
>
> On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > Well ya know, my hose is currently imbedded in a block of ice that goes
> > down to bedrock so I am going to have to wait for a few weeks before I
> > can flush it....
> >
> > Maybe a new pump will have the power to clear it or I have to go spend
> > money to have a heated garage flush the core. It was flushed last fall
> > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > boots and ski pants like now....
> >
> > I think I got the carb working again though. The float needle had built
> > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > gas seems to want to stay inside the carb where it belongs.
> >
> > Mike
> >
> > "L.W.(ßill) ------ III" wrote:
> > >
> > > Hi Mike,
> > > Interesting.
> > > All though, I have found a lot of clogged heater cores, on cars I
> > > thought were well maintained. Just used the garden hose and back
> > > flushed, and they went for no heat to having to turn it down.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > maybe reverse the hoses.
> > > >
> > > > When it heated up with the cap off, it flowed backward for a while from
> > > > what appeared to be convection flow out the block via the lower hose and
> > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > to 3000 rpm and I have heat.
> > > >
> > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > indicates an air pocket.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > something blocking the flow somehow.
> > > > > >
> > > > > > Mike
>
> --
> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
LOL!
I did know better that's for sure, but crap man I didn't want to have to
try and remove the rad for a solder job at -25C just before going on a
trip. I only have one arm that works these days so working on crap is a
real pain in the butt among other places....
Oh and my wife hasn't noticed the emery board I used to polish up the
carb float needle yet so if I am careful/lucky I might get away with the
hot water trip too. ;-)
Mike
Will Honea wrote:
>
> Mike, if push comes to shove go buy a cheap hose and screw it onto the
> drain connector on your hot water heater in the house. Open the
> drain, flush with warm hands, then find someplace to hide when the
> wife figures out you used ALL the hot water.
>
> Sounds like the CJ is letting you know how it feels about being
> ignored. And you can always remind yourself about Stop-Leak: I KNEW
> better than that!
>
> On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > Well ya know, my hose is currently imbedded in a block of ice that goes
> > down to bedrock so I am going to have to wait for a few weeks before I
> > can flush it....
> >
> > Maybe a new pump will have the power to clear it or I have to go spend
> > money to have a heated garage flush the core. It was flushed last fall
> > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > boots and ski pants like now....
> >
> > I think I got the carb working again though. The float needle had built
> > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > gas seems to want to stay inside the carb where it belongs.
> >
> > Mike
> >
> > "L.W.(ßill) ------ III" wrote:
> > >
> > > Hi Mike,
> > > Interesting.
> > > All though, I have found a lot of clogged heater cores, on cars I
> > > thought were well maintained. Just used the garden hose and back
> > > flushed, and they went for no heat to having to turn it down.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > maybe reverse the hoses.
> > > >
> > > > When it heated up with the cap off, it flowed backward for a while from
> > > > what appeared to be convection flow out the block via the lower hose and
> > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > to 3000 rpm and I have heat.
> > > >
> > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > indicates an air pocket.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > something blocking the flow somehow.
> > > > > >
> > > > > > Mike
>
> --
> Will Honea
I did know better that's for sure, but crap man I didn't want to have to
try and remove the rad for a solder job at -25C just before going on a
trip. I only have one arm that works these days so working on crap is a
real pain in the butt among other places....
Oh and my wife hasn't noticed the emery board I used to polish up the
carb float needle yet so if I am careful/lucky I might get away with the
hot water trip too. ;-)
Mike
Will Honea wrote:
>
> Mike, if push comes to shove go buy a cheap hose and screw it onto the
> drain connector on your hot water heater in the house. Open the
> drain, flush with warm hands, then find someplace to hide when the
> wife figures out you used ALL the hot water.
>
> Sounds like the CJ is letting you know how it feels about being
> ignored. And you can always remind yourself about Stop-Leak: I KNEW
> better than that!
>
> On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > Well ya know, my hose is currently imbedded in a block of ice that goes
> > down to bedrock so I am going to have to wait for a few weeks before I
> > can flush it....
> >
> > Maybe a new pump will have the power to clear it or I have to go spend
> > money to have a heated garage flush the core. It was flushed last fall
> > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > boots and ski pants like now....
> >
> > I think I got the carb working again though. The float needle had built
> > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > gas seems to want to stay inside the carb where it belongs.
> >
> > Mike
> >
> > "L.W.(ßill) ------ III" wrote:
> > >
> > > Hi Mike,
> > > Interesting.
> > > All though, I have found a lot of clogged heater cores, on cars I
> > > thought were well maintained. Just used the garden hose and back
> > > flushed, and they went for no heat to having to turn it down.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > maybe reverse the hoses.
> > > >
> > > > When it heated up with the cap off, it flowed backward for a while from
> > > > what appeared to be convection flow out the block via the lower hose and
> > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > to 3000 rpm and I have heat.
> > > >
> > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > indicates an air pocket.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > something blocking the flow somehow.
> > > > > >
> > > > > > Mike
>
> --
> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
LOL!
I did know better that's for sure, but crap man I didn't want to have to
try and remove the rad for a solder job at -25C just before going on a
trip. I only have one arm that works these days so working on crap is a
real pain in the butt among other places....
Oh and my wife hasn't noticed the emery board I used to polish up the
carb float needle yet so if I am careful/lucky I might get away with the
hot water trip too. ;-)
Mike
Will Honea wrote:
>
> Mike, if push comes to shove go buy a cheap hose and screw it onto the
> drain connector on your hot water heater in the house. Open the
> drain, flush with warm hands, then find someplace to hide when the
> wife figures out you used ALL the hot water.
>
> Sounds like the CJ is letting you know how it feels about being
> ignored. And you can always remind yourself about Stop-Leak: I KNEW
> better than that!
>
> On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > Well ya know, my hose is currently imbedded in a block of ice that goes
> > down to bedrock so I am going to have to wait for a few weeks before I
> > can flush it....
> >
> > Maybe a new pump will have the power to clear it or I have to go spend
> > money to have a heated garage flush the core. It was flushed last fall
> > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > boots and ski pants like now....
> >
> > I think I got the carb working again though. The float needle had built
> > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > gas seems to want to stay inside the carb where it belongs.
> >
> > Mike
> >
> > "L.W.(ßill) ------ III" wrote:
> > >
> > > Hi Mike,
> > > Interesting.
> > > All though, I have found a lot of clogged heater cores, on cars I
> > > thought were well maintained. Just used the garden hose and back
> > > flushed, and they went for no heat to having to turn it down.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > maybe reverse the hoses.
> > > >
> > > > When it heated up with the cap off, it flowed backward for a while from
> > > > what appeared to be convection flow out the block via the lower hose and
> > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > to 3000 rpm and I have heat.
> > > >
> > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > indicates an air pocket.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > something blocking the flow somehow.
> > > > > >
> > > > > > Mike
>
> --
> Will Honea
I did know better that's for sure, but crap man I didn't want to have to
try and remove the rad for a solder job at -25C just before going on a
trip. I only have one arm that works these days so working on crap is a
real pain in the butt among other places....
Oh and my wife hasn't noticed the emery board I used to polish up the
carb float needle yet so if I am careful/lucky I might get away with the
hot water trip too. ;-)
Mike
Will Honea wrote:
>
> Mike, if push comes to shove go buy a cheap hose and screw it onto the
> drain connector on your hot water heater in the house. Open the
> drain, flush with warm hands, then find someplace to hide when the
> wife figures out you used ALL the hot water.
>
> Sounds like the CJ is letting you know how it feels about being
> ignored. And you can always remind yourself about Stop-Leak: I KNEW
> better than that!
>
> On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > Well ya know, my hose is currently imbedded in a block of ice that goes
> > down to bedrock so I am going to have to wait for a few weeks before I
> > can flush it....
> >
> > Maybe a new pump will have the power to clear it or I have to go spend
> > money to have a heated garage flush the core. It was flushed last fall
> > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > boots and ski pants like now....
> >
> > I think I got the carb working again though. The float needle had built
> > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > gas seems to want to stay inside the carb where it belongs.
> >
> > Mike
> >
> > "L.W.(ßill) ------ III" wrote:
> > >
> > > Hi Mike,
> > > Interesting.
> > > All though, I have found a lot of clogged heater cores, on cars I
> > > thought were well maintained. Just used the garden hose and back
> > > flushed, and they went for no heat to having to turn it down.
> > > God Bless America, ßill O|||||||O
> > > mailto:-------------------- http://www.----------.com/
> > >
> > > Mike Romain wrote:
> > > >
> > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > maybe reverse the hoses.
> > > >
> > > > When it heated up with the cap off, it flowed backward for a while from
> > > > what appeared to be convection flow out the block via the lower hose and
> > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > to 3000 rpm and I have heat.
> > > >
> > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > >
> > > > Mike
> > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > 88 Cherokee 235 BFG AT's
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > indicates an air pocket.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > something blocking the flow somehow.
> > > > > >
> > > > > > Mike
>
> --
> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
I'm lazy, so when I'm on the farm or out at the cabin and need to get
something running, I tend to spray the carb bowls full of carb cleaner
as soon as I get there. Let them set for an hour or so (coupla beers)
then have at them. I found a cheap cleaner that is also a pretty fair
substitute for starting fluid which also helps.
Ever notice that the heater quits at 10 below, the windshield wipers
work until it rains, and the darned thing absolutely knows when you
left the spare tire home?
Any prognosis on the arm?
On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> LOL!
>
> I did know better that's for sure, but crap man I didn't want to have to
> try and remove the rad for a solder job at -25C just before going on a
> trip. I only have one arm that works these days so working on crap is a
> real pain in the butt among other places....
>
> Oh and my wife hasn't noticed the emery board I used to polish up the
> carb float needle yet so if I am careful/lucky I might get away with the
> hot water trip too. ;-)
>
> Mike
>
> Will Honea wrote:
> >
> > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > drain connector on your hot water heater in the house. Open the
> > drain, flush with warm hands, then find someplace to hide when the
> > wife figures out you used ALL the hot water.
> >
> > Sounds like the CJ is letting you know how it feels about being
> > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > better than that!
> >
> > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > down to bedrock so I am going to have to wait for a few weeks before I
> > > can flush it....
> > >
> > > Maybe a new pump will have the power to clear it or I have to go spend
> > > money to have a heated garage flush the core. It was flushed last fall
> > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > boots and ski pants like now....
> > >
> > > I think I got the carb working again though. The float needle had built
> > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > gas seems to want to stay inside the carb where it belongs.
> > >
> > > Mike
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Interesting.
> > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > thought were well maintained. Just used the garden hose and back
> > > > flushed, and they went for no heat to having to turn it down.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > maybe reverse the hoses.
> > > > >
> > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > to 3000 rpm and I have heat.
> > > > >
> > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > indicates an air pocket.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > something blocking the flow somehow.
> > > > > > >
> > > > > > > Mike
> >
> > --
> > Will Honea
--
Will Honea
something running, I tend to spray the carb bowls full of carb cleaner
as soon as I get there. Let them set for an hour or so (coupla beers)
then have at them. I found a cheap cleaner that is also a pretty fair
substitute for starting fluid which also helps.
Ever notice that the heater quits at 10 below, the windshield wipers
work until it rains, and the darned thing absolutely knows when you
left the spare tire home?
Any prognosis on the arm?
On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> LOL!
>
> I did know better that's for sure, but crap man I didn't want to have to
> try and remove the rad for a solder job at -25C just before going on a
> trip. I only have one arm that works these days so working on crap is a
> real pain in the butt among other places....
>
> Oh and my wife hasn't noticed the emery board I used to polish up the
> carb float needle yet so if I am careful/lucky I might get away with the
> hot water trip too. ;-)
>
> Mike
>
> Will Honea wrote:
> >
> > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > drain connector on your hot water heater in the house. Open the
> > drain, flush with warm hands, then find someplace to hide when the
> > wife figures out you used ALL the hot water.
> >
> > Sounds like the CJ is letting you know how it feels about being
> > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > better than that!
> >
> > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > down to bedrock so I am going to have to wait for a few weeks before I
> > > can flush it....
> > >
> > > Maybe a new pump will have the power to clear it or I have to go spend
> > > money to have a heated garage flush the core. It was flushed last fall
> > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > boots and ski pants like now....
> > >
> > > I think I got the carb working again though. The float needle had built
> > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > gas seems to want to stay inside the carb where it belongs.
> > >
> > > Mike
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Interesting.
> > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > thought were well maintained. Just used the garden hose and back
> > > > flushed, and they went for no heat to having to turn it down.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > maybe reverse the hoses.
> > > > >
> > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > to 3000 rpm and I have heat.
> > > > >
> > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > indicates an air pocket.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > something blocking the flow somehow.
> > > > > > >
> > > > > > > Mike
> >
> > --
> > Will Honea
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
I'm lazy, so when I'm on the farm or out at the cabin and need to get
something running, I tend to spray the carb bowls full of carb cleaner
as soon as I get there. Let them set for an hour or so (coupla beers)
then have at them. I found a cheap cleaner that is also a pretty fair
substitute for starting fluid which also helps.
Ever notice that the heater quits at 10 below, the windshield wipers
work until it rains, and the darned thing absolutely knows when you
left the spare tire home?
Any prognosis on the arm?
On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> LOL!
>
> I did know better that's for sure, but crap man I didn't want to have to
> try and remove the rad for a solder job at -25C just before going on a
> trip. I only have one arm that works these days so working on crap is a
> real pain in the butt among other places....
>
> Oh and my wife hasn't noticed the emery board I used to polish up the
> carb float needle yet so if I am careful/lucky I might get away with the
> hot water trip too. ;-)
>
> Mike
>
> Will Honea wrote:
> >
> > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > drain connector on your hot water heater in the house. Open the
> > drain, flush with warm hands, then find someplace to hide when the
> > wife figures out you used ALL the hot water.
> >
> > Sounds like the CJ is letting you know how it feels about being
> > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > better than that!
> >
> > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > down to bedrock so I am going to have to wait for a few weeks before I
> > > can flush it....
> > >
> > > Maybe a new pump will have the power to clear it or I have to go spend
> > > money to have a heated garage flush the core. It was flushed last fall
> > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > boots and ski pants like now....
> > >
> > > I think I got the carb working again though. The float needle had built
> > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > gas seems to want to stay inside the carb where it belongs.
> > >
> > > Mike
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Interesting.
> > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > thought were well maintained. Just used the garden hose and back
> > > > flushed, and they went for no heat to having to turn it down.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > maybe reverse the hoses.
> > > > >
> > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > to 3000 rpm and I have heat.
> > > > >
> > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > indicates an air pocket.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > something blocking the flow somehow.
> > > > > > >
> > > > > > > Mike
> >
> > --
> > Will Honea
--
Will Honea
something running, I tend to spray the carb bowls full of carb cleaner
as soon as I get there. Let them set for an hour or so (coupla beers)
then have at them. I found a cheap cleaner that is also a pretty fair
substitute for starting fluid which also helps.
Ever notice that the heater quits at 10 below, the windshield wipers
work until it rains, and the darned thing absolutely knows when you
left the spare tire home?
Any prognosis on the arm?
On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> LOL!
>
> I did know better that's for sure, but crap man I didn't want to have to
> try and remove the rad for a solder job at -25C just before going on a
> trip. I only have one arm that works these days so working on crap is a
> real pain in the butt among other places....
>
> Oh and my wife hasn't noticed the emery board I used to polish up the
> carb float needle yet so if I am careful/lucky I might get away with the
> hot water trip too. ;-)
>
> Mike
>
> Will Honea wrote:
> >
> > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > drain connector on your hot water heater in the house. Open the
> > drain, flush with warm hands, then find someplace to hide when the
> > wife figures out you used ALL the hot water.
> >
> > Sounds like the CJ is letting you know how it feels about being
> > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > better than that!
> >
> > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > down to bedrock so I am going to have to wait for a few weeks before I
> > > can flush it....
> > >
> > > Maybe a new pump will have the power to clear it or I have to go spend
> > > money to have a heated garage flush the core. It was flushed last fall
> > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > boots and ski pants like now....
> > >
> > > I think I got the carb working again though. The float needle had built
> > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > gas seems to want to stay inside the carb where it belongs.
> > >
> > > Mike
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Interesting.
> > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > thought were well maintained. Just used the garden hose and back
> > > > flushed, and they went for no heat to having to turn it down.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > maybe reverse the hoses.
> > > > >
> > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > to 3000 rpm and I have heat.
> > > > >
> > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > indicates an air pocket.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > something blocking the flow somehow.
> > > > > > >
> > > > > > > Mike
> >
> > --
> > Will Honea
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
I'm lazy, so when I'm on the farm or out at the cabin and need to get
something running, I tend to spray the carb bowls full of carb cleaner
as soon as I get there. Let them set for an hour or so (coupla beers)
then have at them. I found a cheap cleaner that is also a pretty fair
substitute for starting fluid which also helps.
Ever notice that the heater quits at 10 below, the windshield wipers
work until it rains, and the darned thing absolutely knows when you
left the spare tire home?
Any prognosis on the arm?
On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> LOL!
>
> I did know better that's for sure, but crap man I didn't want to have to
> try and remove the rad for a solder job at -25C just before going on a
> trip. I only have one arm that works these days so working on crap is a
> real pain in the butt among other places....
>
> Oh and my wife hasn't noticed the emery board I used to polish up the
> carb float needle yet so if I am careful/lucky I might get away with the
> hot water trip too. ;-)
>
> Mike
>
> Will Honea wrote:
> >
> > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > drain connector on your hot water heater in the house. Open the
> > drain, flush with warm hands, then find someplace to hide when the
> > wife figures out you used ALL the hot water.
> >
> > Sounds like the CJ is letting you know how it feels about being
> > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > better than that!
> >
> > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > down to bedrock so I am going to have to wait for a few weeks before I
> > > can flush it....
> > >
> > > Maybe a new pump will have the power to clear it or I have to go spend
> > > money to have a heated garage flush the core. It was flushed last fall
> > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > boots and ski pants like now....
> > >
> > > I think I got the carb working again though. The float needle had built
> > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > gas seems to want to stay inside the carb where it belongs.
> > >
> > > Mike
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Interesting.
> > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > thought were well maintained. Just used the garden hose and back
> > > > flushed, and they went for no heat to having to turn it down.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > maybe reverse the hoses.
> > > > >
> > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > to 3000 rpm and I have heat.
> > > > >
> > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > indicates an air pocket.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > something blocking the flow somehow.
> > > > > > >
> > > > > > > Mike
> >
> > --
> > Will Honea
--
Will Honea
something running, I tend to spray the carb bowls full of carb cleaner
as soon as I get there. Let them set for an hour or so (coupla beers)
then have at them. I found a cheap cleaner that is also a pretty fair
substitute for starting fluid which also helps.
Ever notice that the heater quits at 10 below, the windshield wipers
work until it rains, and the darned thing absolutely knows when you
left the spare tire home?
Any prognosis on the arm?
On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
wrote:
> LOL!
>
> I did know better that's for sure, but crap man I didn't want to have to
> try and remove the rad for a solder job at -25C just before going on a
> trip. I only have one arm that works these days so working on crap is a
> real pain in the butt among other places....
>
> Oh and my wife hasn't noticed the emery board I used to polish up the
> carb float needle yet so if I am careful/lucky I might get away with the
> hot water trip too. ;-)
>
> Mike
>
> Will Honea wrote:
> >
> > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > drain connector on your hot water heater in the house. Open the
> > drain, flush with warm hands, then find someplace to hide when the
> > wife figures out you used ALL the hot water.
> >
> > Sounds like the CJ is letting you know how it feels about being
> > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > better than that!
> >
> > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > wrote:
> >
> > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > down to bedrock so I am going to have to wait for a few weeks before I
> > > can flush it....
> > >
> > > Maybe a new pump will have the power to clear it or I have to go spend
> > > money to have a heated garage flush the core. It was flushed last fall
> > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > boots and ski pants like now....
> > >
> > > I think I got the carb working again though. The float needle had built
> > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > gas seems to want to stay inside the carb where it belongs.
> > >
> > > Mike
> > >
> > > "L.W.(ßill) ------ III" wrote:
> > > >
> > > > Hi Mike,
> > > > Interesting.
> > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > thought were well maintained. Just used the garden hose and back
> > > > flushed, and they went for no heat to having to turn it down.
> > > > God Bless America, ßill O|||||||O
> > > > mailto:-------------------- http://www.----------.com/
> > > >
> > > > Mike Romain wrote:
> > > > >
> > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > maybe reverse the hoses.
> > > > >
> > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > to 3000 rpm and I have heat.
> > > > >
> > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > >
> > > > > Mike
> > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > 88 Cherokee 235 BFG AT's
> > > > >
> > > > > "L.W.(ßill) ------ III" wrote:
> > > > > >
> > > > > > Hi Mike,
> > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > indicates an air pocket.
> > > > > > God Bless America, ßill O|||||||O
> > > > > > mailto:-------------------- http://www.----------.com/
> > > > > >
> > > > > > Mike Romain wrote:
> > > > > > >
> > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > something blocking the flow somehow.
> > > > > > >
> > > > > > > Mike
> >
> > --
> > Will Honea
--
Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
The CJ has been my daily driver, I just haven't driven very much
lately. I am just going to try and give it some TLC and talk to it
nice...
My arm/shoulder seems screwed unfortunately. I have tendonosis in the
supraspinatus tendon with some other muscle damage and nerve root damage
from 3 compressed vertabra/disk sets that turns the muscles to bad knots
if I put any stress on them or move my head the wrong way. Even the
insurance company's doctor is saying I will never likely use it properly
again. Ah well, in for a different set of physio doctors now so I will
see what they can do.
Mike
Will Honea wrote:
>
> I'm lazy, so when I'm on the farm or out at the cabin and need to get
> something running, I tend to spray the carb bowls full of carb cleaner
> as soon as I get there. Let them set for an hour or so (coupla beers)
> then have at them. I found a cheap cleaner that is also a pretty fair
> substitute for starting fluid which also helps.
>
> Ever notice that the heater quits at 10 below, the windshield wipers
> work until it rains, and the darned thing absolutely knows when you
> left the spare tire home?
>
> Any prognosis on the arm?
>
> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > LOL!
> >
> > I did know better that's for sure, but crap man I didn't want to have to
> > try and remove the rad for a solder job at -25C just before going on a
> > trip. I only have one arm that works these days so working on crap is a
> > real pain in the butt among other places....
> >
> > Oh and my wife hasn't noticed the emery board I used to polish up the
> > carb float needle yet so if I am careful/lucky I might get away with the
> > hot water trip too. ;-)
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > drain connector on your hot water heater in the house. Open the
> > > drain, flush with warm hands, then find someplace to hide when the
> > > wife figures out you used ALL the hot water.
> > >
> > > Sounds like the CJ is letting you know how it feels about being
> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > better than that!
> > >
> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > can flush it....
> > > >
> > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > money to have a heated garage flush the core. It was flushed last fall
> > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > boots and ski pants like now....
> > > >
> > > > I think I got the carb working again though. The float needle had built
> > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > gas seems to want to stay inside the carb where it belongs.
> > > >
> > > > Mike
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Interesting.
> > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > thought were well maintained. Just used the garden hose and back
> > > > > flushed, and they went for no heat to having to turn it down.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > maybe reverse the hoses.
> > > > > >
> > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > to 3000 rpm and I have heat.
> > > > > >
> > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > >
> > > > > > Mike
> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > 88 Cherokee 235 BFG AT's
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > indicates an air pocket.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > something blocking the flow somehow.
> > > > > > > >
> > > > > > > > Mike
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
lately. I am just going to try and give it some TLC and talk to it
nice...
My arm/shoulder seems screwed unfortunately. I have tendonosis in the
supraspinatus tendon with some other muscle damage and nerve root damage
from 3 compressed vertabra/disk sets that turns the muscles to bad knots
if I put any stress on them or move my head the wrong way. Even the
insurance company's doctor is saying I will never likely use it properly
again. Ah well, in for a different set of physio doctors now so I will
see what they can do.
Mike
Will Honea wrote:
>
> I'm lazy, so when I'm on the farm or out at the cabin and need to get
> something running, I tend to spray the carb bowls full of carb cleaner
> as soon as I get there. Let them set for an hour or so (coupla beers)
> then have at them. I found a cheap cleaner that is also a pretty fair
> substitute for starting fluid which also helps.
>
> Ever notice that the heater quits at 10 below, the windshield wipers
> work until it rains, and the darned thing absolutely knows when you
> left the spare tire home?
>
> Any prognosis on the arm?
>
> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > LOL!
> >
> > I did know better that's for sure, but crap man I didn't want to have to
> > try and remove the rad for a solder job at -25C just before going on a
> > trip. I only have one arm that works these days so working on crap is a
> > real pain in the butt among other places....
> >
> > Oh and my wife hasn't noticed the emery board I used to polish up the
> > carb float needle yet so if I am careful/lucky I might get away with the
> > hot water trip too. ;-)
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > drain connector on your hot water heater in the house. Open the
> > > drain, flush with warm hands, then find someplace to hide when the
> > > wife figures out you used ALL the hot water.
> > >
> > > Sounds like the CJ is letting you know how it feels about being
> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > better than that!
> > >
> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > can flush it....
> > > >
> > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > money to have a heated garage flush the core. It was flushed last fall
> > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > boots and ski pants like now....
> > > >
> > > > I think I got the carb working again though. The float needle had built
> > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > gas seems to want to stay inside the carb where it belongs.
> > > >
> > > > Mike
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Interesting.
> > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > thought were well maintained. Just used the garden hose and back
> > > > > flushed, and they went for no heat to having to turn it down.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > maybe reverse the hoses.
> > > > > >
> > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > to 3000 rpm and I have heat.
> > > > > >
> > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > >
> > > > > > Mike
> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > 88 Cherokee 235 BFG AT's
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > indicates an air pocket.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > something blocking the flow somehow.
> > > > > > > >
> > > > > > > > Mike
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
Guest
Posts: n/a
Re: My CJ7 is having fits on me!
The CJ has been my daily driver, I just haven't driven very much
lately. I am just going to try and give it some TLC and talk to it
nice...
My arm/shoulder seems screwed unfortunately. I have tendonosis in the
supraspinatus tendon with some other muscle damage and nerve root damage
from 3 compressed vertabra/disk sets that turns the muscles to bad knots
if I put any stress on them or move my head the wrong way. Even the
insurance company's doctor is saying I will never likely use it properly
again. Ah well, in for a different set of physio doctors now so I will
see what they can do.
Mike
Will Honea wrote:
>
> I'm lazy, so when I'm on the farm or out at the cabin and need to get
> something running, I tend to spray the carb bowls full of carb cleaner
> as soon as I get there. Let them set for an hour or so (coupla beers)
> then have at them. I found a cheap cleaner that is also a pretty fair
> substitute for starting fluid which also helps.
>
> Ever notice that the heater quits at 10 below, the windshield wipers
> work until it rains, and the darned thing absolutely knows when you
> left the spare tire home?
>
> Any prognosis on the arm?
>
> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > LOL!
> >
> > I did know better that's for sure, but crap man I didn't want to have to
> > try and remove the rad for a solder job at -25C just before going on a
> > trip. I only have one arm that works these days so working on crap is a
> > real pain in the butt among other places....
> >
> > Oh and my wife hasn't noticed the emery board I used to polish up the
> > carb float needle yet so if I am careful/lucky I might get away with the
> > hot water trip too. ;-)
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > drain connector on your hot water heater in the house. Open the
> > > drain, flush with warm hands, then find someplace to hide when the
> > > wife figures out you used ALL the hot water.
> > >
> > > Sounds like the CJ is letting you know how it feels about being
> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > better than that!
> > >
> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > can flush it....
> > > >
> > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > money to have a heated garage flush the core. It was flushed last fall
> > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > boots and ski pants like now....
> > > >
> > > > I think I got the carb working again though. The float needle had built
> > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > gas seems to want to stay inside the carb where it belongs.
> > > >
> > > > Mike
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Interesting.
> > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > thought were well maintained. Just used the garden hose and back
> > > > > flushed, and they went for no heat to having to turn it down.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > maybe reverse the hoses.
> > > > > >
> > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > to 3000 rpm and I have heat.
> > > > > >
> > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > >
> > > > > > Mike
> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > 88 Cherokee 235 BFG AT's
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > indicates an air pocket.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > something blocking the flow somehow.
> > > > > > > >
> > > > > > > > Mike
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
lately. I am just going to try and give it some TLC and talk to it
nice...
My arm/shoulder seems screwed unfortunately. I have tendonosis in the
supraspinatus tendon with some other muscle damage and nerve root damage
from 3 compressed vertabra/disk sets that turns the muscles to bad knots
if I put any stress on them or move my head the wrong way. Even the
insurance company's doctor is saying I will never likely use it properly
again. Ah well, in for a different set of physio doctors now so I will
see what they can do.
Mike
Will Honea wrote:
>
> I'm lazy, so when I'm on the farm or out at the cabin and need to get
> something running, I tend to spray the carb bowls full of carb cleaner
> as soon as I get there. Let them set for an hour or so (coupla beers)
> then have at them. I found a cheap cleaner that is also a pretty fair
> substitute for starting fluid which also helps.
>
> Ever notice that the heater quits at 10 below, the windshield wipers
> work until it rains, and the darned thing absolutely knows when you
> left the spare tire home?
>
> Any prognosis on the arm?
>
> On Thu, 17 Mar 2005 23:25:18 UTC Mike Romain <romainm@sympatico.ca>
> wrote:
>
> > LOL!
> >
> > I did know better that's for sure, but crap man I didn't want to have to
> > try and remove the rad for a solder job at -25C just before going on a
> > trip. I only have one arm that works these days so working on crap is a
> > real pain in the butt among other places....
> >
> > Oh and my wife hasn't noticed the emery board I used to polish up the
> > carb float needle yet so if I am careful/lucky I might get away with the
> > hot water trip too. ;-)
> >
> > Mike
> >
> > Will Honea wrote:
> > >
> > > Mike, if push comes to shove go buy a cheap hose and screw it onto the
> > > drain connector on your hot water heater in the house. Open the
> > > drain, flush with warm hands, then find someplace to hide when the
> > > wife figures out you used ALL the hot water.
> > >
> > > Sounds like the CJ is letting you know how it feels about being
> > > ignored. And you can always remind yourself about Stop-Leak: I KNEW
> > > better than that!
> > >
> > > On Thu, 17 Mar 2005 14:06:37 UTC Mike Romain <romainm@sympatico.ca>
> > > wrote:
> > >
> > > > Well ya know, my hose is currently imbedded in a block of ice that goes
> > > > down to bedrock so I am going to have to wait for a few weeks before I
> > > > can flush it....
> > > >
> > > > Maybe a new pump will have the power to clear it or I have to go spend
> > > > money to have a heated garage flush the core. It was flushed last fall
> > > > and I had wicked heat, didn't even need a coat on, let alone gloves and
> > > > boots and ski pants like now....
> > > >
> > > > I think I got the carb working again though. The float needle had built
> > > > up varnish crap on one of it's 3 slider rails. I polished it up and the
> > > > gas seems to want to stay inside the carb where it belongs.
> > > >
> > > > Mike
> > > >
> > > > "L.W.(ßill) ------ III" wrote:
> > > > >
> > > > > Hi Mike,
> > > > > Interesting.
> > > > > All though, I have found a lot of clogged heater cores, on cars I
> > > > > thought were well maintained. Just used the garden hose and back
> > > > > flushed, and they went for no heat to having to turn it down.
> > > > > God Bless America, ßill O|||||||O
> > > > > mailto:-------------------- http://www.----------.com/
> > > > >
> > > > > Mike Romain wrote:
> > > > > >
> > > > > > I believe the slow flow out of the pump allowed all the stop leak to
> > > > > > gather in the heater core blocking the flow. I now have half flow. Hot
> > > > > > top hose and luke warm lower return to the pump. Gotta flush it or
> > > > > > maybe reverse the hoses.
> > > > > >
> > > > > > When it heated up with the cap off, it flowed backward for a while from
> > > > > > what appeared to be convection flow out the block via the lower hose and
> > > > > > only went forward out the top hose when I revved it up to 3000 or so.
> > > > > > Same deal with heat. If I drive at 2000 rpm, no freaking heat, got up
> > > > > > to 3000 rpm and I have heat.
> > > > > >
> > > > > > Bottom rad hose is new and has a spring in it so no collapse there.
> > > > > >
> > > > > > Mike
> > > > > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > > > > 88 Cherokee 235 BFG AT's
> > > > > >
> > > > > > "L.W.(ßill) ------ III" wrote:
> > > > > > >
> > > > > > > Hi Mike,
> > > > > > > Could be, I lost one in Germany, and didn't even realize it until
> > > > > > > the one day it reached eighty degrees, and it boiled. Ford didn't use a
> > > > > > > pump on their Model "T". I was just guessing by the heater not working
> > > > > > > indicates an air pocket.
> > > > > > > God Bless America, ßill O|||||||O
> > > > > > > mailto:-------------------- http://www.----------.com/
> > > > > > >
> > > > > > > Mike Romain wrote:
> > > > > > > >
> > > > > > > > No bubbles or smoke in the open rad Bill. I also am not losing fluid.
> > > > > > > > The only thing I can think of is the pump impeller loose on the shaft or
> > > > > > > > something blocking the flow somehow.
> > > > > > > >
> > > > > > > > Mike
> > >
> > > --
> > > Will Honea
>
> --
> Will Honea
