Mounting Warn Solenoid Pack
11-14-2004, 01:21 PM
#1
Guest
Posts: n/a
Mounting Warn Solenoid Pack
Yeah, I know, I haven't been around much. Just lurking in the corner.
But i need some advice/ideas from you folks.
I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
the inside of the engine compartment. Specifically on the right side of
the engine. There's a bracket there for the AC compressor (we don't have
AC), so I was thinking of fabbing a bracket/plate that would bolt to the
existing bracket. Then weld on a piece of square tubing to raise the
pack about level with the top of the motor. The top of the tube would
have another plate welded to it, that would be used to bolt on the
solenoid pack. Confused yet?
My question is......has anyone else done this or seen it done? Any
concerns? I want to move the pack to prevent theft and to also have a
cleaner winch install.
Mike
98 TJ SE
33x10.5 BFG MTs
M8000
etc, etc,
But i need some advice/ideas from you folks.
I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
the inside of the engine compartment. Specifically on the right side of
the engine. There's a bracket there for the AC compressor (we don't have
AC), so I was thinking of fabbing a bracket/plate that would bolt to the
existing bracket. Then weld on a piece of square tubing to raise the
pack about level with the top of the motor. The top of the tube would
have another plate welded to it, that would be used to bolt on the
solenoid pack. Confused yet?
My question is......has anyone else done this or seen it done? Any
concerns? I want to move the pack to prevent theft and to also have a
cleaner winch install.
Mike
98 TJ SE
33x10.5 BFG MTs
M8000
etc, etc,
11-14-2004, 04:53 PM
#2
Guest
Posts: n/a
Re: Mounting Warn Solenoid Pack
I mounted mine on the passenger side fender pannel.
GzrGlide wrote:
> Yeah, I know, I haven't been around much. Just lurking in the corner.
> But i need some advice/ideas from you folks.
>
> I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
> the inside of the engine compartment. Specifically on the right side of
> the engine. There's a bracket there for the AC compressor (we don't have
> AC), so I was thinking of fabbing a bracket/plate that would bolt to the
> existing bracket. Then weld on a piece of square tubing to raise the
> pack about level with the top of the motor. The top of the tube would
> have another plate welded to it, that would be used to bolt on the
> solenoid pack. Confused yet?
>
> My question is......has anyone else done this or seen it done? Any
> concerns? I want to move the pack to prevent theft and to also have a
> cleaner winch install.
>
> Mike
> 98 TJ SE
> 33x10.5 BFG MTs
> M8000
> etc, etc,
>
GzrGlide wrote:
> Yeah, I know, I haven't been around much. Just lurking in the corner.
> But i need some advice/ideas from you folks.
>
> I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
> the inside of the engine compartment. Specifically on the right side of
> the engine. There's a bracket there for the AC compressor (we don't have
> AC), so I was thinking of fabbing a bracket/plate that would bolt to the
> existing bracket. Then weld on a piece of square tubing to raise the
> pack about level with the top of the motor. The top of the tube would
> have another plate welded to it, that would be used to bolt on the
> solenoid pack. Confused yet?
>
> My question is......has anyone else done this or seen it done? Any
> concerns? I want to move the pack to prevent theft and to also have a
> cleaner winch install.
>
> Mike
> 98 TJ SE
> 33x10.5 BFG MTs
> M8000
> etc, etc,
>
11-14-2004, 04:53 PM
#3
Guest
Posts: n/a
Re: Mounting Warn Solenoid Pack
I mounted mine on the passenger side fender pannel.
GzrGlide wrote:
> Yeah, I know, I haven't been around much. Just lurking in the corner.
> But i need some advice/ideas from you folks.
>
> I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
> the inside of the engine compartment. Specifically on the right side of
> the engine. There's a bracket there for the AC compressor (we don't have
> AC), so I was thinking of fabbing a bracket/plate that would bolt to the
> existing bracket. Then weld on a piece of square tubing to raise the
> pack about level with the top of the motor. The top of the tube would
> have another plate welded to it, that would be used to bolt on the
> solenoid pack. Confused yet?
>
> My question is......has anyone else done this or seen it done? Any
> concerns? I want to move the pack to prevent theft and to also have a
> cleaner winch install.
>
> Mike
> 98 TJ SE
> 33x10.5 BFG MTs
> M8000
> etc, etc,
>
GzrGlide wrote:
> Yeah, I know, I haven't been around much. Just lurking in the corner.
> But i need some advice/ideas from you folks.
>
> I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
> the inside of the engine compartment. Specifically on the right side of
> the engine. There's a bracket there for the AC compressor (we don't have
> AC), so I was thinking of fabbing a bracket/plate that would bolt to the
> existing bracket. Then weld on a piece of square tubing to raise the
> pack about level with the top of the motor. The top of the tube would
> have another plate welded to it, that would be used to bolt on the
> solenoid pack. Confused yet?
>
> My question is......has anyone else done this or seen it done? Any
> concerns? I want to move the pack to prevent theft and to also have a
> cleaner winch install.
>
> Mike
> 98 TJ SE
> 33x10.5 BFG MTs
> M8000
> etc, etc,
>
11-14-2004, 04:53 PM
#4
Guest
Posts: n/a
Re: Mounting Warn Solenoid Pack
I mounted mine on the passenger side fender pannel.
GzrGlide wrote:
> Yeah, I know, I haven't been around much. Just lurking in the corner.
> But i need some advice/ideas from you folks.
>
> I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
> the inside of the engine compartment. Specifically on the right side of
> the engine. There's a bracket there for the AC compressor (we don't have
> AC), so I was thinking of fabbing a bracket/plate that would bolt to the
> existing bracket. Then weld on a piece of square tubing to raise the
> pack about level with the top of the motor. The top of the tube would
> have another plate welded to it, that would be used to bolt on the
> solenoid pack. Confused yet?
>
> My question is......has anyone else done this or seen it done? Any
> concerns? I want to move the pack to prevent theft and to also have a
> cleaner winch install.
>
> Mike
> 98 TJ SE
> 33x10.5 BFG MTs
> M8000
> etc, etc,
>
GzrGlide wrote:
> Yeah, I know, I haven't been around much. Just lurking in the corner.
> But i need some advice/ideas from you folks.
>
> I have a Warn M8000 winch on our TJ. I want to move the solenoid pack to
> the inside of the engine compartment. Specifically on the right side of
> the engine. There's a bracket there for the AC compressor (we don't have
> AC), so I was thinking of fabbing a bracket/plate that would bolt to the
> existing bracket. Then weld on a piece of square tubing to raise the
> pack about level with the top of the motor. The top of the tube would
> have another plate welded to it, that would be used to bolt on the
> solenoid pack. Confused yet?
>
> My question is......has anyone else done this or seen it done? Any
> concerns? I want to move the pack to prevent theft and to also have a
> cleaner winch install.
>
> Mike
> 98 TJ SE
> 33x10.5 BFG MTs
> M8000
> etc, etc,
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
