Metering rod in carb???
10-13-2003, 10:10 PM
#1
Guest
Posts: n/a
Metering rod in carb???
I was reading an article on a web page that mentioned the carb's metering
rod can be adjusted differently to accommendate high altitude operation.
I'm planning to rebuild my Carter 1BBl because it needs a new needle and
seat after the new (never had before) fuel/vapor return line was installed
to the tank. Anyone ever heard of this?
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
rod can be adjusted differently to accommendate high altitude operation.
I'm planning to rebuild my Carter 1BBl because it needs a new needle and
seat after the new (never had before) fuel/vapor return line was installed
to the tank. Anyone ever heard of this?
--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
10-13-2003, 10:42 PM
#2
Guest
Posts: n/a
Re: Metering rod in carb???
Hi Paul,
You have to buy a whole set of metering rods from Carter and be a
jobber. Do you know if it was originally sold in your mile high state?
If not you might be a tad on the rich side for sea level, I wouldn't
worry about it, just put in a kit and make sure the tubes at number 51
are clear: http://www.carburetorfactory.com/expvw03.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Brogren wrote:
>
> I was reading an article on a web page that mentioned the carb's metering
> rod can be adjusted differently to accommendate high altitude operation.
> I'm planning to rebuild my Carter 1BBl because it needs a new needle and
> seat after the new (never had before) fuel/vapor return line was installed
> to the tank. Anyone ever heard of this?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
You have to buy a whole set of metering rods from Carter and be a
jobber. Do you know if it was originally sold in your mile high state?
If not you might be a tad on the rich side for sea level, I wouldn't
worry about it, just put in a kit and make sure the tubes at number 51
are clear: http://www.carburetorfactory.com/expvw03.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Brogren wrote:
>
> I was reading an article on a web page that mentioned the carb's metering
> rod can be adjusted differently to accommendate high altitude operation.
> I'm planning to rebuild my Carter 1BBl because it needs a new needle and
> seat after the new (never had before) fuel/vapor return line was installed
> to the tank. Anyone ever heard of this?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
10-13-2003, 10:42 PM
#3
Guest
Posts: n/a
Re: Metering rod in carb???
Hi Paul,
You have to buy a whole set of metering rods from Carter and be a
jobber. Do you know if it was originally sold in your mile high state?
If not you might be a tad on the rich side for sea level, I wouldn't
worry about it, just put in a kit and make sure the tubes at number 51
are clear: http://www.carburetorfactory.com/expvw03.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Brogren wrote:
>
> I was reading an article on a web page that mentioned the carb's metering
> rod can be adjusted differently to accommendate high altitude operation.
> I'm planning to rebuild my Carter 1BBl because it needs a new needle and
> seat after the new (never had before) fuel/vapor return line was installed
> to the tank. Anyone ever heard of this?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
You have to buy a whole set of metering rods from Carter and be a
jobber. Do you know if it was originally sold in your mile high state?
If not you might be a tad on the rich side for sea level, I wouldn't
worry about it, just put in a kit and make sure the tubes at number 51
are clear: http://www.carburetorfactory.com/expvw03.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Brogren wrote:
>
> I was reading an article on a web page that mentioned the carb's metering
> rod can be adjusted differently to accommendate high altitude operation.
> I'm planning to rebuild my Carter 1BBl because it needs a new needle and
> seat after the new (never had before) fuel/vapor return line was installed
> to the tank. Anyone ever heard of this?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
10-13-2003, 10:42 PM
#4
Guest
Posts: n/a
Re: Metering rod in carb???
Hi Paul,
You have to buy a whole set of metering rods from Carter and be a
jobber. Do you know if it was originally sold in your mile high state?
If not you might be a tad on the rich side for sea level, I wouldn't
worry about it, just put in a kit and make sure the tubes at number 51
are clear: http://www.carburetorfactory.com/expvw03.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Brogren wrote:
>
> I was reading an article on a web page that mentioned the carb's metering
> rod can be adjusted differently to accommendate high altitude operation.
> I'm planning to rebuild my Carter 1BBl because it needs a new needle and
> seat after the new (never had before) fuel/vapor return line was installed
> to the tank. Anyone ever heard of this?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
You have to buy a whole set of metering rods from Carter and be a
jobber. Do you know if it was originally sold in your mile high state?
If not you might be a tad on the rich side for sea level, I wouldn't
worry about it, just put in a kit and make sure the tubes at number 51
are clear: http://www.carburetorfactory.com/expvw03.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Paul Brogren wrote:
>
> I was reading an article on a web page that mentioned the carb's metering
> rod can be adjusted differently to accommendate high altitude operation.
> I'm planning to rebuild my Carter 1BBl because it needs a new needle and
> seat after the new (never had before) fuel/vapor return line was installed
> to the tank. Anyone ever heard of this?
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
Thread
Thread Starter
Forum
Replies
Last Post
Clint
Jeep Mailing List
12
03-09-2005 01:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
