Master cylinder question.
04-12-2004, 04:19 PM
#21
Guest
Posts: n/a
Re: Master cylinder question.
Then it is not like the schematic I put up, that doesn't use wheel
senors: http://www.----------.com/88JeepBrakeParts.pdf
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> But how it is possible only rear? I found sensors on front wheels also?
senors: http://www.----------.com/88JeepBrakeParts.pdf
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> But how it is possible only rear? I found sensors on front wheels also?
04-13-2004, 05:10 AM
#22
Guest
Posts: n/a
Re: Master cylinder question.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:407AF0B4.32982407@sympatico.ca...
> My book only shows two masters for your 92XJ.
>
> One has two lines, the other has 4 lines for ABS.
>
> You have 3??
>
> Is that a euro special or something? Could be like Bill mentions maybe
> just rear ABS? You might have tone wheels all around, but are there
> pickups?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
No, Bill's drawing is correct. Cylinder is same like on this page. Three
connections on left side. Only, I have sensors on all wheels. In Haynes
manual I found only those two types as you said. I'm not sure where my Jeep
comes from, I think from Canada.
I'd like to make modifications to fit this master cyl. I received but I need
some pictures and I can not find them on internet. Under hood is a bunch of
tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
you have any link with pictures of such modifications? How can I know where
my Jeep comes from by chassis number?
Thanks guys.
04-13-2004, 05:10 AM
#23
Guest
Posts: n/a
Re: Master cylinder question.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:407AF0B4.32982407@sympatico.ca...
> My book only shows two masters for your 92XJ.
>
> One has two lines, the other has 4 lines for ABS.
>
> You have 3??
>
> Is that a euro special or something? Could be like Bill mentions maybe
> just rear ABS? You might have tone wheels all around, but are there
> pickups?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
No, Bill's drawing is correct. Cylinder is same like on this page. Three
connections on left side. Only, I have sensors on all wheels. In Haynes
manual I found only those two types as you said. I'm not sure where my Jeep
comes from, I think from Canada.
I'd like to make modifications to fit this master cyl. I received but I need
some pictures and I can not find them on internet. Under hood is a bunch of
tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
you have any link with pictures of such modifications? How can I know where
my Jeep comes from by chassis number?
Thanks guys.
04-13-2004, 05:10 AM
#24
Guest
Posts: n/a
Re: Master cylinder question.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:407AF0B4.32982407@sympatico.ca...
> My book only shows two masters for your 92XJ.
>
> One has two lines, the other has 4 lines for ABS.
>
> You have 3??
>
> Is that a euro special or something? Could be like Bill mentions maybe
> just rear ABS? You might have tone wheels all around, but are there
> pickups?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
No, Bill's drawing is correct. Cylinder is same like on this page. Three
connections on left side. Only, I have sensors on all wheels. In Haynes
manual I found only those two types as you said. I'm not sure where my Jeep
comes from, I think from Canada.
I'd like to make modifications to fit this master cyl. I received but I need
some pictures and I can not find them on internet. Under hood is a bunch of
tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
you have any link with pictures of such modifications? How can I know where
my Jeep comes from by chassis number?
Thanks guys.
04-13-2004, 05:10 AM
#25
Guest
Posts: n/a
Re: Master cylinder question.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:407AF0B4.32982407@sympatico.ca...
> My book only shows two masters for your 92XJ.
>
> One has two lines, the other has 4 lines for ABS.
>
> You have 3??
>
> Is that a euro special or something? Could be like Bill mentions maybe
> just rear ABS? You might have tone wheels all around, but are there
> pickups?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
No, Bill's drawing is correct. Cylinder is same like on this page. Three
connections on left side. Only, I have sensors on all wheels. In Haynes
manual I found only those two types as you said. I'm not sure where my Jeep
comes from, I think from Canada.
I'd like to make modifications to fit this master cyl. I received but I need
some pictures and I can not find them on internet. Under hood is a bunch of
tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
you have any link with pictures of such modifications? How can I know where
my Jeep comes from by chassis number?
Thanks guys.
04-13-2004, 04:31 PM
#26
Guest
Posts: n/a
Re: Master cylinder question.
Hi Davey,
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
04-13-2004, 04:31 PM
#27
Guest
Posts: n/a
Re: Master cylinder question.
Hi Davey,
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
04-13-2004, 04:31 PM
#28
Guest
Posts: n/a
Re: Master cylinder question.
Hi Davey,
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
04-13-2004, 04:31 PM
#29
Guest
Posts: n/a
Re: Master cylinder question.
Hi Davey,
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
http://www.naxja.org/html/techarticl...ll_OEM_ABS.htm Look
around American military bases for their junk yards and your donor, they
were all over the place back in the sixties when I was there.
VIN Decoding: http://www.specialtyparts.com/jeep/vins/91yr93all.php
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Davey wrote:
>
> No, Bill's drawing is correct. Cylinder is same like on this page. Three
> connections on left side. Only, I have sensors on all wheels. In Haynes
> manual I found only those two types as you said. I'm not sure where my Jeep
> comes from, I think from Canada.
> I'd like to make modifications to fit this master cyl. I received but I need
> some pictures and I can not find them on internet. Under hood is a bunch of
> tubes, regulators, etc. Anyway, my ABS doesn't work anymore so... Bill, do
> you have any link with pictures of such modifications? How can I know where
> my Jeep comes from by chassis number?
> Thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
Cal Wheeler
Jeep Mailing List
0
09-12-2003 11:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)