Manual locking hub question
Guest
Posts: n/a
Manual locking hub question
Hello,
I have a hub that won't turn all the way to locking position without force.
It will still lock, but have to really give it some twist to get it over.
This past winter one morning when it was -38F, this particular hub was
frozen stuck and I made the mistake of forcing it over to lock. That is
when the trouble began.
After taking it apart this morning, the hub assembly appears to be fine.
Looks like only the cap threads are stripped. I went ahead and replaced the
whole thing, but could have probably gotten away with only a new cap
assembly.
Any of you cold-weather guys/gals have a similar frozen hub problem before?
Thanks.
Terry
92YJ
I have a hub that won't turn all the way to locking position without force.
It will still lock, but have to really give it some twist to get it over.
This past winter one morning when it was -38F, this particular hub was
frozen stuck and I made the mistake of forcing it over to lock. That is
when the trouble began.
After taking it apart this morning, the hub assembly appears to be fine.
Looks like only the cap threads are stripped. I went ahead and replaced the
whole thing, but could have probably gotten away with only a new cap
assembly.
Any of you cold-weather guys/gals have a similar frozen hub problem before?
Thanks.
Terry
92YJ
Guest
Posts: n/a
Re: Manual locking hub question
Lock the hubs in November and leave them locked until April.
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message
news:413b5012$0$64849$ec3e2dad@news.usenetmonster. com...
> Hello,
>
> I have a hub that won't turn all the way to locking position without
force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced
the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> Thanks.
>
> Terry
> 92YJ
>
>
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message
news:413b5012$0$64849$ec3e2dad@news.usenetmonster. com...
> Hello,
>
> I have a hub that won't turn all the way to locking position without
force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced
the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> Thanks.
>
> Terry
> 92YJ
>
>
Guest
Posts: n/a
Re: Manual locking hub question
Lock the hubs in November and leave them locked until April.
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message
news:413b5012$0$64849$ec3e2dad@news.usenetmonster. com...
> Hello,
>
> I have a hub that won't turn all the way to locking position without
force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced
the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> Thanks.
>
> Terry
> 92YJ
>
>
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message
news:413b5012$0$64849$ec3e2dad@news.usenetmonster. com...
> Hello,
>
> I have a hub that won't turn all the way to locking position without
force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced
the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> Thanks.
>
> Terry
> 92YJ
>
>
Guest
Posts: n/a
Re: Manual locking hub question
Lock the hubs in November and leave them locked until April.
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message
news:413b5012$0$64849$ec3e2dad@news.usenetmonster. com...
> Hello,
>
> I have a hub that won't turn all the way to locking position without
force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced
the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> Thanks.
>
> Terry
> 92YJ
>
>
"Terry Jeffrey" <twjeffrey@hotmail.com> wrote in message
news:413b5012$0$64849$ec3e2dad@news.usenetmonster. com...
> Hello,
>
> I have a hub that won't turn all the way to locking position without
force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced
the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> Thanks.
>
> Terry
> 92YJ
>
>
Guest
Posts: n/a
Re: Manual locking hub question
Did you lubricate it this time?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Terry Jeffrey wrote:
>
> Hello,
>
> I have a hub that won't turn all the way to locking position without force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem before?
> Thanks.
>
> Terry
> 92YJ
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Terry Jeffrey wrote:
>
> Hello,
>
> I have a hub that won't turn all the way to locking position without force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem before?
> Thanks.
>
> Terry
> 92YJ
Guest
Posts: n/a
Re: Manual locking hub question
Did you lubricate it this time?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Terry Jeffrey wrote:
>
> Hello,
>
> I have a hub that won't turn all the way to locking position without force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem before?
> Thanks.
>
> Terry
> 92YJ
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Terry Jeffrey wrote:
>
> Hello,
>
> I have a hub that won't turn all the way to locking position without force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem before?
> Thanks.
>
> Terry
> 92YJ
Guest
Posts: n/a
Re: Manual locking hub question
Did you lubricate it this time?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Terry Jeffrey wrote:
>
> Hello,
>
> I have a hub that won't turn all the way to locking position without force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem before?
> Thanks.
>
> Terry
> 92YJ
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Terry Jeffrey wrote:
>
> Hello,
>
> I have a hub that won't turn all the way to locking position without force.
> It will still lock, but have to really give it some twist to get it over.
> This past winter one morning when it was -38F, this particular hub was
> frozen stuck and I made the mistake of forcing it over to lock. That is
> when the trouble began.
>
> After taking it apart this morning, the hub assembly appears to be fine.
> Looks like only the cap threads are stripped. I went ahead and replaced the
> whole thing, but could have probably gotten away with only a new cap
> assembly.
>
> Any of you cold-weather guys/gals have a similar frozen hub problem before?
> Thanks.
>
> Terry
> 92YJ
Guest
Posts: n/a
Re: Manual locking hub question
Yup, got her lubed up.
I like Matt's idea to leave them locked prior to winter.
Thanks.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:413B5F04.58E6E0E7@***.net...
> Did you lubricate it this time?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Terry Jeffrey wrote:
> >
> > Hello,
> >
> > I have a hub that won't turn all the way to locking position without
force.
> > It will still lock, but have to really give it some twist to get it
over.
> > This past winter one morning when it was -38F, this particular hub was
> > frozen stuck and I made the mistake of forcing it over to lock. That is
> > when the trouble began.
> >
> > After taking it apart this morning, the hub assembly appears to be fine.
> > Looks like only the cap threads are stripped. I went ahead and replaced
the
> > whole thing, but could have probably gotten away with only a new cap
> > assembly.
> >
> > Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> > Thanks.
> >
> > Terry
> > 92YJ
I like Matt's idea to leave them locked prior to winter.
Thanks.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:413B5F04.58E6E0E7@***.net...
> Did you lubricate it this time?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Terry Jeffrey wrote:
> >
> > Hello,
> >
> > I have a hub that won't turn all the way to locking position without
force.
> > It will still lock, but have to really give it some twist to get it
over.
> > This past winter one morning when it was -38F, this particular hub was
> > frozen stuck and I made the mistake of forcing it over to lock. That is
> > when the trouble began.
> >
> > After taking it apart this morning, the hub assembly appears to be fine.
> > Looks like only the cap threads are stripped. I went ahead and replaced
the
> > whole thing, but could have probably gotten away with only a new cap
> > assembly.
> >
> > Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> > Thanks.
> >
> > Terry
> > 92YJ
Guest
Posts: n/a
Re: Manual locking hub question
Yup, got her lubed up.
I like Matt's idea to leave them locked prior to winter.
Thanks.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:413B5F04.58E6E0E7@***.net...
> Did you lubricate it this time?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Terry Jeffrey wrote:
> >
> > Hello,
> >
> > I have a hub that won't turn all the way to locking position without
force.
> > It will still lock, but have to really give it some twist to get it
over.
> > This past winter one morning when it was -38F, this particular hub was
> > frozen stuck and I made the mistake of forcing it over to lock. That is
> > when the trouble began.
> >
> > After taking it apart this morning, the hub assembly appears to be fine.
> > Looks like only the cap threads are stripped. I went ahead and replaced
the
> > whole thing, but could have probably gotten away with only a new cap
> > assembly.
> >
> > Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> > Thanks.
> >
> > Terry
> > 92YJ
I like Matt's idea to leave them locked prior to winter.
Thanks.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:413B5F04.58E6E0E7@***.net...
> Did you lubricate it this time?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Terry Jeffrey wrote:
> >
> > Hello,
> >
> > I have a hub that won't turn all the way to locking position without
force.
> > It will still lock, but have to really give it some twist to get it
over.
> > This past winter one morning when it was -38F, this particular hub was
> > frozen stuck and I made the mistake of forcing it over to lock. That is
> > when the trouble began.
> >
> > After taking it apart this morning, the hub assembly appears to be fine.
> > Looks like only the cap threads are stripped. I went ahead and replaced
the
> > whole thing, but could have probably gotten away with only a new cap
> > assembly.
> >
> > Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> > Thanks.
> >
> > Terry
> > 92YJ
Guest
Posts: n/a
Re: Manual locking hub question
Yup, got her lubed up.
I like Matt's idea to leave them locked prior to winter.
Thanks.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:413B5F04.58E6E0E7@***.net...
> Did you lubricate it this time?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Terry Jeffrey wrote:
> >
> > Hello,
> >
> > I have a hub that won't turn all the way to locking position without
force.
> > It will still lock, but have to really give it some twist to get it
over.
> > This past winter one morning when it was -38F, this particular hub was
> > frozen stuck and I made the mistake of forcing it over to lock. That is
> > when the trouble began.
> >
> > After taking it apart this morning, the hub assembly appears to be fine.
> > Looks like only the cap threads are stripped. I went ahead and replaced
the
> > whole thing, but could have probably gotten away with only a new cap
> > assembly.
> >
> > Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> > Thanks.
> >
> > Terry
> > 92YJ
I like Matt's idea to leave them locked prior to winter.
Thanks.
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:413B5F04.58E6E0E7@***.net...
> Did you lubricate it this time?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Terry Jeffrey wrote:
> >
> > Hello,
> >
> > I have a hub that won't turn all the way to locking position without
force.
> > It will still lock, but have to really give it some twist to get it
over.
> > This past winter one morning when it was -38F, this particular hub was
> > frozen stuck and I made the mistake of forcing it over to lock. That is
> > when the trouble began.
> >
> > After taking it apart this morning, the hub assembly appears to be fine.
> > Looks like only the cap threads are stripped. I went ahead and replaced
the
> > whole thing, but could have probably gotten away with only a new cap
> > assembly.
> >
> > Any of you cold-weather guys/gals have a similar frozen hub problem
before?
> > Thanks.
> >
> > Terry
> > 92YJ
