Maint Reqrd light
05-29-2004, 01:48 AM
#41
Guest
Posts: n/a
Re: Maint Reqrd light
Rich wrote:
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
There isn't on my 91 XJ. I ran into the same thing, not at a multiple of
82,500 miles, either, although it is possible that he odometer was
messed with before I got this Jeep. Note that the O2 sensor had just
been replaced about a month prior.
Anyway, I pulled the bulb (it is a grain of wheat type) and put it
accross 120 volts AC, just to blow the filiment, and put it back. That
way I can always plede innocent with the smog *****.
"Gee, the light was on for a second then went out!"
Grin,
DAve
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
There isn't on my 91 XJ. I ran into the same thing, not at a multiple of
82,500 miles, either, although it is possible that he odometer was
messed with before I got this Jeep. Note that the O2 sensor had just
been replaced about a month prior.
Anyway, I pulled the bulb (it is a grain of wheat type) and put it
accross 120 volts AC, just to blow the filiment, and put it back. That
way I can always plede innocent with the smog *****.
"Gee, the light was on for a second then went out!"
Grin,
DAve
05-29-2004, 09:49 AM
#42
Guest
Posts: n/a
Re: Maint Reqrd light
It's just a mileage timer.
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
05-29-2004, 09:49 AM
#43
Guest
Posts: n/a
Re: Maint Reqrd light
It's just a mileage timer.
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
05-29-2004, 09:49 AM
#44
Guest
Posts: n/a
Re: Maint Reqrd light
It's just a mileage timer.
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
05-29-2004, 09:49 AM
#45
Guest
Posts: n/a
Re: Maint Reqrd light
It's just a mileage timer.
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
Mike
Rich wrote:
>
> Is there anything else that is hooked to the light except the O2
> sensor, shruly there is??? I really dont want to just toss the bulb
> incase someting else happens and it needs to tell me "Maintenance
> Required"
>
> Rich.
>
> On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
> wrote:
>
> >Aw, it ain't that bad. Throwing the bulb away is free.
> >
> >
> >In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
> >
> >>And then some people wonder why I like the old stuff...
> >>
> >>So Chrysler decided you 'had' to spend money one way or the other eh.
> >>
> >>Mike
> >>
> >>bllsht wrote:
> >>>
> >>> Not on a 93. It's part of the engine computer.
> >>>
> >>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
> >>>
> >>> >The timer module is under the dash on the right side of the steering
> >>> >column under the cruise module if you have one. It can be unplugged.
> >>> >
> >>> >Mike
> >>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> >>> >88 Cherokee 235 BFG AT's
> >>> >
> >>> >Rich wrote:
> >>> >>
> >>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
> >>> >> Ive been told its because of the O2 sensor but its been changed and
> >>> >> the computer has not been reset. I have a printout of the diag. codes
> >>> >> and did the on, off, on, off, on thing with the ingnition and it gave
> >>> >> no significant codes, so I know all is fine. How do you get the light
> >>> >> to go out??
> >>> >> Ive disconnected the battery (for a long time, over night), I
> >>> >> even took it to the local jeep dealer and they wanted to charge me
> >>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
> >>> >> clear it, I know that might take 5 min. and thats if they have a
> >>> >> problem.
> >>> >> Any Ideas???
> >>> >>
> >>> >> Thanks,
> >>> >> Rich
05-29-2004, 03:11 PM
#46
Guest
Posts: n/a
Re: Maint Reqrd light
The computer turns on the light at approx 82,500 miles to tell you to do
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
05-29-2004, 03:11 PM
#47
Guest
Posts: n/a
Re: Maint Reqrd light
The computer turns on the light at approx 82,500 miles to tell you to do
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
05-29-2004, 03:11 PM
#48
Guest
Posts: n/a
Re: Maint Reqrd light
The computer turns on the light at approx 82,500 miles to tell you to do
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
05-29-2004, 03:11 PM
#49
Guest
Posts: n/a
Re: Maint Reqrd light
The computer turns on the light at approx 82,500 miles to tell you to do
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
emission system maintenance. It is just what it says it is, a maintenance
reminder. It won't tell you if something has gone wrong. If you're going to
ignore it anyway, what's the difference?
In message <v22gb01766mpo0lo6005pdf94hm6nqj3kn@4ax.com>, "Rich" wrote:
>Is there anything else that is hooked to the light except the O2
>sensor, shruly there is??? I really dont want to just toss the bulb
>incase someting else happens and it needs to tell me "Maintenance
>Required"
>
>Rich.
>
>On Fri, 28 May 2004 20:10:12 -0700, bllsht <nospam@invaliddot.net>
>wrote:
>
>>Aw, it ain't that bad. Throwing the bulb away is free.
>>
>>
>>In message <40B744A0.93DADCAD@sympatico.ca>, "Mike Romain" wrote:
>>
>>>And then some people wonder why I like the old stuff...
>>>
>>>So Chrysler decided you 'had' to spend money one way or the other eh.
>>>
>>>Mike
>>>
>>>bllsht wrote:
>>>>
>>>> Not on a 93. It's part of the engine computer.
>>>>
>>>> In message <40B5E8D9.D800ADF4@sympatico.ca>, "Mike Romain" wrote:
>>>>
>>>> >The timer module is under the dash on the right side of the steering
>>>> >column under the cruise module if you have one. It can be unplugged.
>>>> >
>>>> >Mike
>>>> >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>>>> >88 Cherokee 235 BFG AT's
>>>> >
>>>> >Rich wrote:
>>>> >>
>>>> >> Ive got a 93 YJ wrangler and the Maint Required light is on.
>>>> >> Ive been told its because of the O2 sensor but its been changed and
>>>> >> the computer has not been reset. I have a printout of the diag. codes
>>>> >> and did the on, off, on, off, on thing with the ingnition and it gave
>>>> >> no significant codes, so I know all is fine. How do you get the light
>>>> >> to go out??
>>>> >> Ive disconnected the battery (for a long time, over night), I
>>>> >> even took it to the local jeep dealer and they wanted to charge me
>>>> >> 1/2hr (~ $50) labor charge just to hook it up the their computer and
>>>> >> clear it, I know that might take 5 min. and thats if they have a
>>>> >> problem.
>>>> >> Any Ideas???
>>>> >>
>>>> >> Thanks,
>>>> >> Rich
05-29-2004, 03:18 PM
#50
Guest
Posts: n/a
Re: Maint Reqrd light
In message <0vVtc.4128$Lq1.3210@nwrddc03.gnilink.net>, "DaveW" wrote:
>Rich wrote:
>> Is there anything else that is hooked to the light except the O2
>> sensor, shruly there is??? I really dont want to just toss the bulb
>> incase someting else happens and it needs to tell me "Maintenance
>> Required"
>>
>> Rich.
>
>
>There isn't on my 91 XJ. I ran into the same thing, not at a multiple of
>82,500 miles, either, although it is possible that he odometer was
>messed with before I got this Jeep. Note that the O2 sensor had just
>been replaced about a month prior.
That would be 82,500 miles since the last reset. If you didn't reset it when
you replaced the O2, it's still counting from the last reset.
>
>Anyway, I pulled the bulb (it is a grain of wheat type) and put it
>accross 120 volts AC, just to blow the filiment, and put it back. That
>way I can always plede innocent with the smog *****.
Speaking California, the maintenance reminder is not tested for functionality
during a smog test. An illuminated maintenance reminder is also not a reason to
fail a smog test.
>
>"Gee, the light was on for a second then went out!"
>
>Grin,
>
>DAve
>Rich wrote:
>> Is there anything else that is hooked to the light except the O2
>> sensor, shruly there is??? I really dont want to just toss the bulb
>> incase someting else happens and it needs to tell me "Maintenance
>> Required"
>>
>> Rich.
>
>
>There isn't on my 91 XJ. I ran into the same thing, not at a multiple of
>82,500 miles, either, although it is possible that he odometer was
>messed with before I got this Jeep. Note that the O2 sensor had just
>been replaced about a month prior.
That would be 82,500 miles since the last reset. If you didn't reset it when
you replaced the O2, it's still counting from the last reset.
>
>Anyway, I pulled the bulb (it is a grain of wheat type) and put it
>accross 120 volts AC, just to blow the filiment, and put it back. That
>way I can always plede innocent with the smog *****.
Speaking California, the maintenance reminder is not tested for functionality
during a smog test. An illuminated maintenance reminder is also not a reason to
fail a smog test.
>
>"Gee, the light was on for a second then went out!"
>
>Grin,
>
>DAve
