machanical/electrical Temp-gauge questions
#11
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Hi John,
I think I'd run them both off a T. Although the older YJ uses a
separate sending unit: http://home.sprynet.com/~dale02/coolant.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> i dont mind drilling holes,(i hate electrical) im a worn out
> carpenter,,
>
> if i unhook the plug from my old gauge set, will this throw my computer
> into a fit and tizzy?
> ,
> johnp
I think I'd run them both off a T. Although the older YJ uses a
separate sending unit: http://home.sprynet.com/~dale02/coolant.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> i dont mind drilling holes,(i hate electrical) im a worn out
> carpenter,,
>
> if i unhook the plug from my old gauge set, will this throw my computer
> into a fit and tizzy?
> ,
> johnp
#12
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Hi John,
I think I'd run them both off a T. Although the older YJ uses a
separate sending unit: http://home.sprynet.com/~dale02/coolant.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> i dont mind drilling holes,(i hate electrical) im a worn out
> carpenter,,
>
> if i unhook the plug from my old gauge set, will this throw my computer
> into a fit and tizzy?
> ,
> johnp
I think I'd run them both off a T. Although the older YJ uses a
separate sending unit: http://home.sprynet.com/~dale02/coolant.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> i dont mind drilling holes,(i hate electrical) im a worn out
> carpenter,,
>
> if i unhook the plug from my old gauge set, will this throw my computer
> into a fit and tizzy?
> ,
> johnp
#13
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Hi John,
I think I'd run them both off a T. Although the older YJ uses a
separate sending unit: http://home.sprynet.com/~dale02/coolant.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> i dont mind drilling holes,(i hate electrical) im a worn out
> carpenter,,
>
> if i unhook the plug from my old gauge set, will this throw my computer
> into a fit and tizzy?
> ,
> johnp
I think I'd run them both off a T. Although the older YJ uses a
separate sending unit: http://home.sprynet.com/~dale02/coolant.htm
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> i dont mind drilling holes,(i hate electrical) im a worn out
> carpenter,,
>
> if i unhook the plug from my old gauge set, will this throw my computer
> into a fit and tizzy?
> ,
> johnp
#14
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Bill,
im building a new dash, so im getting rid of the original gauge pod,
,
so im ***-u-me-ing, that if i went elecrical for the water temp i could
just splice the new sensor into the old wires, and plug into the new
gauge,
,
but if i go machanical, i would leave the wires alone, but just unhook
them from the old gauge-pod,
here is where i wonder,,,knowing zip about elecricity,
does the current HAVE to go through the gauge, for the computer,
or can it be unplugged,
(i suppose i could cut the old gauge out and duct-tape it up under the
dash,)
,
johnp
im building a new dash, so im getting rid of the original gauge pod,
,
so im ***-u-me-ing, that if i went elecrical for the water temp i could
just splice the new sensor into the old wires, and plug into the new
gauge,
,
but if i go machanical, i would leave the wires alone, but just unhook
them from the old gauge-pod,
here is where i wonder,,,knowing zip about elecricity,
does the current HAVE to go through the gauge, for the computer,
or can it be unplugged,
(i suppose i could cut the old gauge out and duct-tape it up under the
dash,)
,
johnp
#15
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Bill,
im building a new dash, so im getting rid of the original gauge pod,
,
so im ***-u-me-ing, that if i went elecrical for the water temp i could
just splice the new sensor into the old wires, and plug into the new
gauge,
,
but if i go machanical, i would leave the wires alone, but just unhook
them from the old gauge-pod,
here is where i wonder,,,knowing zip about elecricity,
does the current HAVE to go through the gauge, for the computer,
or can it be unplugged,
(i suppose i could cut the old gauge out and duct-tape it up under the
dash,)
,
johnp
im building a new dash, so im getting rid of the original gauge pod,
,
so im ***-u-me-ing, that if i went elecrical for the water temp i could
just splice the new sensor into the old wires, and plug into the new
gauge,
,
but if i go machanical, i would leave the wires alone, but just unhook
them from the old gauge-pod,
here is where i wonder,,,knowing zip about elecricity,
does the current HAVE to go through the gauge, for the computer,
or can it be unplugged,
(i suppose i could cut the old gauge out and duct-tape it up under the
dash,)
,
johnp
#16
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Bill,
im building a new dash, so im getting rid of the original gauge pod,
,
so im ***-u-me-ing, that if i went elecrical for the water temp i could
just splice the new sensor into the old wires, and plug into the new
gauge,
,
but if i go machanical, i would leave the wires alone, but just unhook
them from the old gauge-pod,
here is where i wonder,,,knowing zip about elecricity,
does the current HAVE to go through the gauge, for the computer,
or can it be unplugged,
(i suppose i could cut the old gauge out and duct-tape it up under the
dash,)
,
johnp
im building a new dash, so im getting rid of the original gauge pod,
,
so im ***-u-me-ing, that if i went elecrical for the water temp i could
just splice the new sensor into the old wires, and plug into the new
gauge,
,
but if i go machanical, i would leave the wires alone, but just unhook
them from the old gauge-pod,
here is where i wonder,,,knowing zip about elecricity,
does the current HAVE to go through the gauge, for the computer,
or can it be unplugged,
(i suppose i could cut the old gauge out and duct-tape it up under the
dash,)
,
johnp
#17
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Leave the old wires open, if you're not connecting them to the
sending unit.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> im building a new dash, so im getting rid of the original gauge pod,
> ,
> so im ***-u-me-ing, that if i went elecrical for the water temp i could
> just splice the new sensor into the old wires, and plug into the new
> gauge,
> ,
> but if i go machanical, i would leave the wires alone, but just unhook
> them from the old gauge-pod,
> here is where i wonder,,,knowing zip about elecricity,
> does the current HAVE to go through the gauge, for the computer,
> or can it be unplugged,
> (i suppose i could cut the old gauge out and duct-tape it up under the
> dash,)
> ,
> johnp
sending unit.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> im building a new dash, so im getting rid of the original gauge pod,
> ,
> so im ***-u-me-ing, that if i went elecrical for the water temp i could
> just splice the new sensor into the old wires, and plug into the new
> gauge,
> ,
> but if i go machanical, i would leave the wires alone, but just unhook
> them from the old gauge-pod,
> here is where i wonder,,,knowing zip about elecricity,
> does the current HAVE to go through the gauge, for the computer,
> or can it be unplugged,
> (i suppose i could cut the old gauge out and duct-tape it up under the
> dash,)
> ,
> johnp
#18
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Leave the old wires open, if you're not connecting them to the
sending unit.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> im building a new dash, so im getting rid of the original gauge pod,
> ,
> so im ***-u-me-ing, that if i went elecrical for the water temp i could
> just splice the new sensor into the old wires, and plug into the new
> gauge,
> ,
> but if i go machanical, i would leave the wires alone, but just unhook
> them from the old gauge-pod,
> here is where i wonder,,,knowing zip about elecricity,
> does the current HAVE to go through the gauge, for the computer,
> or can it be unplugged,
> (i suppose i could cut the old gauge out and duct-tape it up under the
> dash,)
> ,
> johnp
sending unit.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> im building a new dash, so im getting rid of the original gauge pod,
> ,
> so im ***-u-me-ing, that if i went elecrical for the water temp i could
> just splice the new sensor into the old wires, and plug into the new
> gauge,
> ,
> but if i go machanical, i would leave the wires alone, but just unhook
> them from the old gauge-pod,
> here is where i wonder,,,knowing zip about elecricity,
> does the current HAVE to go through the gauge, for the computer,
> or can it be unplugged,
> (i suppose i could cut the old gauge out and duct-tape it up under the
> dash,)
> ,
> johnp
#19
Guest
Posts: n/a
![Default](https://www.jeepscanada.com/images/icons/icon1.gif)
Leave the old wires open, if you're not connecting them to the
sending unit.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> im building a new dash, so im getting rid of the original gauge pod,
> ,
> so im ***-u-me-ing, that if i went elecrical for the water temp i could
> just splice the new sensor into the old wires, and plug into the new
> gauge,
> ,
> but if i go machanical, i would leave the wires alone, but just unhook
> them from the old gauge-pod,
> here is where i wonder,,,knowing zip about elecricity,
> does the current HAVE to go through the gauge, for the computer,
> or can it be unplugged,
> (i suppose i could cut the old gauge out and duct-tape it up under the
> dash,)
> ,
> johnp
sending unit.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Dirty Ditch Dawg wrote:
>
> Bill,
> im building a new dash, so im getting rid of the original gauge pod,
> ,
> so im ***-u-me-ing, that if i went elecrical for the water temp i could
> just splice the new sensor into the old wires, and plug into the new
> gauge,
> ,
> but if i go machanical, i would leave the wires alone, but just unhook
> them from the old gauge-pod,
> here is where i wonder,,,knowing zip about elecricity,
> does the current HAVE to go through the gauge, for the computer,
> or can it be unplugged,
> (i suppose i could cut the old gauge out and duct-tape it up under the
> dash,)
> ,
> johnp
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)