M151 MUTT replica kit
12-11-2005, 07:47 PM
#31
Guest
Posts: n/a
Re: M151 MUTT replica kit
If their bodies were made of steel, cutting them in half wouldn't
have been a problem, they'd just weld the ends back together as most
Japanese ricers are salvaged.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Howard Eisenhauer wrote:
>
> My Senility?? Darn, I had forgotten all 'bout that :(.
>
> My pre-mature, er, um, whatever we were talking about not-withstanding
> a bit of research reveals that M151 Mutts were, with very few
> exceptions, buit with steel bodies.
>
> try this web site instead-
>
> http://www.geocities.com/fordm151/
>
> Per
> http://autos.groups.yahoo.com/group/...2?viscount=100
> Ford didn't go with the aluminium body due to problems with stress
> cracking. It also sems there would have been corrosion problems
> between the aluminium & steel components. as all the the MUTTS I've
> seen have been rusted, not corroded I stand by my assertation that
> M151s awere, for all practicle intents & purposes, Steel, nor
> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>
> http://www.sphynx.com/mitymite/m151half.html
>
> The exceptions may have been some speacial "airbourne" models which
> may or may not have seen actual service. I have not been able to find
> any references on the web (for what THATS worth) that these things
> ever actually existed. Per our last, er, um, discussion + input from
> my wife's second cousin's husband (you remember him, Right??)
> on the the subject these rumours may be refering to the Mighty Mite
> vehicle-
>
> http://www.4wdonline.com/Mil/M422/MightyMite.html
>
> Fondest Regards,
>
> H.
have been a problem, they'd just weld the ends back together as most
Japanese ricers are salvaged.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Howard Eisenhauer wrote:
>
> My Senility?? Darn, I had forgotten all 'bout that :(.
>
> My pre-mature, er, um, whatever we were talking about not-withstanding
> a bit of research reveals that M151 Mutts were, with very few
> exceptions, buit with steel bodies.
>
> try this web site instead-
>
> http://www.geocities.com/fordm151/
>
> Per
> http://autos.groups.yahoo.com/group/...2?viscount=100
> Ford didn't go with the aluminium body due to problems with stress
> cracking. It also sems there would have been corrosion problems
> between the aluminium & steel components. as all the the MUTTS I've
> seen have been rusted, not corroded I stand by my assertation that
> M151s awere, for all practicle intents & purposes, Steel, nor
> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>
> http://www.sphynx.com/mitymite/m151half.html
>
> The exceptions may have been some speacial "airbourne" models which
> may or may not have seen actual service. I have not been able to find
> any references on the web (for what THATS worth) that these things
> ever actually existed. Per our last, er, um, discussion + input from
> my wife's second cousin's husband (you remember him, Right??)
> on the the subject these rumours may be refering to the Mighty Mite
> vehicle-
>
> http://www.4wdonline.com/Mil/M422/MightyMite.html
>
> Fondest Regards,
>
> H.
12-11-2005, 08:03 PM
#32
Guest
Posts: n/a
Re: M151 MUTT replica kit
L.W. ------ III (ßill) wrote:
> And I thought all vehicles have springs, well except my soapbox
> derby entry. and hardtail.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Bret Ludwig wrote:
> >
> > Many unibody cars have springs. All of them except Citroens, as far as
> > I know.
Well, Citroens, at least D-series models, didn't. They had hydraulic
spheres that acted as spring and damper ('shock absorber'). Rolls Royce
used them as well but only as a "helper" in addition to conventional
springs. A Rolls weighs almost three times what a Citroen does.
A few Brit cars used a poor-man's version called Hydrolastic. One Indy
car in '64 or '65 or thereabouts used it and was called the MG Liquid
Suspension Special. It had an Offenheuser for power.
12-11-2005, 08:03 PM
#33
Guest
Posts: n/a
Re: M151 MUTT replica kit
L.W. ------ III (ßill) wrote:
> And I thought all vehicles have springs, well except my soapbox
> derby entry. and hardtail.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Bret Ludwig wrote:
> >
> > Many unibody cars have springs. All of them except Citroens, as far as
> > I know.
Well, Citroens, at least D-series models, didn't. They had hydraulic
spheres that acted as spring and damper ('shock absorber'). Rolls Royce
used them as well but only as a "helper" in addition to conventional
springs. A Rolls weighs almost three times what a Citroen does.
A few Brit cars used a poor-man's version called Hydrolastic. One Indy
car in '64 or '65 or thereabouts used it and was called the MG Liquid
Suspension Special. It had an Offenheuser for power.
12-11-2005, 08:03 PM
#34
Guest
Posts: n/a
Re: M151 MUTT replica kit
L.W. ------ III (ßill) wrote:
> And I thought all vehicles have springs, well except my soapbox
> derby entry. and hardtail.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Bret Ludwig wrote:
> >
> > Many unibody cars have springs. All of them except Citroens, as far as
> > I know.
Well, Citroens, at least D-series models, didn't. They had hydraulic
spheres that acted as spring and damper ('shock absorber'). Rolls Royce
used them as well but only as a "helper" in addition to conventional
springs. A Rolls weighs almost three times what a Citroen does.
A few Brit cars used a poor-man's version called Hydrolastic. One Indy
car in '64 or '65 or thereabouts used it and was called the MG Liquid
Suspension Special. It had an Offenheuser for power.
12-11-2005, 09:08 PM
#35
Guest
Posts: n/a
Re: M151 MUTT replica kit
Umm, welding them back togeather *is* what they do, as per our
previous missives mentioning my wife's second cousin's husband's (you
remember him, Right??) project.
Here's some documentary evidence by way of a MUTT I found sitting in a
parking lot one day,
http://www.tantel.ca/Images/M151%20MUTT%20PICS/
I'd like to bring to your attention pics 3 & 4 in particular, those
funny looking verticle bumps on the rockers is where it was cut into
*Three* sections (like in this link from the last message
http://www.sphynx.com/mitymite/m151half.html: )
& welded back togeather.
And, yes, although it doesn't show in the pics it was quite definately
Rusty.
Waiting Patiently,
H.
On Sun, 11 Dec 2005 16:47:17 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> If their bodies were made of steel, cutting them in half wouldn't
>have been a problem, they'd just weld the ends back together as most
>Japanese ricers are salvaged.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Howard Eisenhauer wrote:
>>
>> My Senility?? Darn, I had forgotten all 'bout that :(.
>>
>> My pre-mature, er, um, whatever we were talking about not-withstanding
>> a bit of research reveals that M151 Mutts were, with very few
>> exceptions, buit with steel bodies.
>>
>> try this web site instead-
>>
>> http://www.geocities.com/fordm151/
>>
>> Per
>> http://autos.groups.yahoo.com/group/...2?viscount=100
>> Ford didn't go with the aluminium body due to problems with stress
>> cracking. It also sems there would have been corrosion problems
>> between the aluminium & steel components. as all the the MUTTS I've
>> seen have been rusted, not corroded I stand by my assertation that
>> M151s awere, for all practicle intents & purposes, Steel, nor
>> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>>
>> http://www.sphynx.com/mitymite/m151half.html
>>
>> The exceptions may have been some speacial "airbourne" models which
>> may or may not have seen actual service. I have not been able to find
>> any references on the web (for what THATS worth) that these things
>> ever actually existed. Per our last, er, um, discussion + input from
>> my wife's second cousin's husband (you remember him, Right??)
>> on the the subject these rumours may be refering to the Mighty Mite
>> vehicle-
>>
>> http://www.4wdonline.com/Mil/M422/MightyMite.html
>>
>> Fondest Regards,
>>
>> H.
previous missives mentioning my wife's second cousin's husband's (you
remember him, Right??) project.
Here's some documentary evidence by way of a MUTT I found sitting in a
parking lot one day,
http://www.tantel.ca/Images/M151%20MUTT%20PICS/
I'd like to bring to your attention pics 3 & 4 in particular, those
funny looking verticle bumps on the rockers is where it was cut into
*Three* sections (like in this link from the last message
http://www.sphynx.com/mitymite/m151half.html: )
& welded back togeather.
And, yes, although it doesn't show in the pics it was quite definately
Rusty.
Waiting Patiently,
H.
On Sun, 11 Dec 2005 16:47:17 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> If their bodies were made of steel, cutting them in half wouldn't
>have been a problem, they'd just weld the ends back together as most
>Japanese ricers are salvaged.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Howard Eisenhauer wrote:
>>
>> My Senility?? Darn, I had forgotten all 'bout that :(.
>>
>> My pre-mature, er, um, whatever we were talking about not-withstanding
>> a bit of research reveals that M151 Mutts were, with very few
>> exceptions, buit with steel bodies.
>>
>> try this web site instead-
>>
>> http://www.geocities.com/fordm151/
>>
>> Per
>> http://autos.groups.yahoo.com/group/...2?viscount=100
>> Ford didn't go with the aluminium body due to problems with stress
>> cracking. It also sems there would have been corrosion problems
>> between the aluminium & steel components. as all the the MUTTS I've
>> seen have been rusted, not corroded I stand by my assertation that
>> M151s awere, for all practicle intents & purposes, Steel, nor
>> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>>
>> http://www.sphynx.com/mitymite/m151half.html
>>
>> The exceptions may have been some speacial "airbourne" models which
>> may or may not have seen actual service. I have not been able to find
>> any references on the web (for what THATS worth) that these things
>> ever actually existed. Per our last, er, um, discussion + input from
>> my wife's second cousin's husband (you remember him, Right??)
>> on the the subject these rumours may be refering to the Mighty Mite
>> vehicle-
>>
>> http://www.4wdonline.com/Mil/M422/MightyMite.html
>>
>> Fondest Regards,
>>
>> H.
12-11-2005, 09:08 PM
#36
Guest
Posts: n/a
Re: M151 MUTT replica kit
Umm, welding them back togeather *is* what they do, as per our
previous missives mentioning my wife's second cousin's husband's (you
remember him, Right??) project.
Here's some documentary evidence by way of a MUTT I found sitting in a
parking lot one day,
http://www.tantel.ca/Images/M151%20MUTT%20PICS/
I'd like to bring to your attention pics 3 & 4 in particular, those
funny looking verticle bumps on the rockers is where it was cut into
*Three* sections (like in this link from the last message
http://www.sphynx.com/mitymite/m151half.html: )
& welded back togeather.
And, yes, although it doesn't show in the pics it was quite definately
Rusty.
Waiting Patiently,
H.
On Sun, 11 Dec 2005 16:47:17 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> If their bodies were made of steel, cutting them in half wouldn't
>have been a problem, they'd just weld the ends back together as most
>Japanese ricers are salvaged.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Howard Eisenhauer wrote:
>>
>> My Senility?? Darn, I had forgotten all 'bout that :(.
>>
>> My pre-mature, er, um, whatever we were talking about not-withstanding
>> a bit of research reveals that M151 Mutts were, with very few
>> exceptions, buit with steel bodies.
>>
>> try this web site instead-
>>
>> http://www.geocities.com/fordm151/
>>
>> Per
>> http://autos.groups.yahoo.com/group/...2?viscount=100
>> Ford didn't go with the aluminium body due to problems with stress
>> cracking. It also sems there would have been corrosion problems
>> between the aluminium & steel components. as all the the MUTTS I've
>> seen have been rusted, not corroded I stand by my assertation that
>> M151s awere, for all practicle intents & purposes, Steel, nor
>> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>>
>> http://www.sphynx.com/mitymite/m151half.html
>>
>> The exceptions may have been some speacial "airbourne" models which
>> may or may not have seen actual service. I have not been able to find
>> any references on the web (for what THATS worth) that these things
>> ever actually existed. Per our last, er, um, discussion + input from
>> my wife's second cousin's husband (you remember him, Right??)
>> on the the subject these rumours may be refering to the Mighty Mite
>> vehicle-
>>
>> http://www.4wdonline.com/Mil/M422/MightyMite.html
>>
>> Fondest Regards,
>>
>> H.
previous missives mentioning my wife's second cousin's husband's (you
remember him, Right??) project.
Here's some documentary evidence by way of a MUTT I found sitting in a
parking lot one day,
http://www.tantel.ca/Images/M151%20MUTT%20PICS/
I'd like to bring to your attention pics 3 & 4 in particular, those
funny looking verticle bumps on the rockers is where it was cut into
*Three* sections (like in this link from the last message
http://www.sphynx.com/mitymite/m151half.html: )
& welded back togeather.
And, yes, although it doesn't show in the pics it was quite definately
Rusty.
Waiting Patiently,
H.
On Sun, 11 Dec 2005 16:47:17 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> If their bodies were made of steel, cutting them in half wouldn't
>have been a problem, they'd just weld the ends back together as most
>Japanese ricers are salvaged.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Howard Eisenhauer wrote:
>>
>> My Senility?? Darn, I had forgotten all 'bout that :(.
>>
>> My pre-mature, er, um, whatever we were talking about not-withstanding
>> a bit of research reveals that M151 Mutts were, with very few
>> exceptions, buit with steel bodies.
>>
>> try this web site instead-
>>
>> http://www.geocities.com/fordm151/
>>
>> Per
>> http://autos.groups.yahoo.com/group/...2?viscount=100
>> Ford didn't go with the aluminium body due to problems with stress
>> cracking. It also sems there would have been corrosion problems
>> between the aluminium & steel components. as all the the MUTTS I've
>> seen have been rusted, not corroded I stand by my assertation that
>> M151s awere, for all practicle intents & purposes, Steel, nor
>> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>>
>> http://www.sphynx.com/mitymite/m151half.html
>>
>> The exceptions may have been some speacial "airbourne" models which
>> may or may not have seen actual service. I have not been able to find
>> any references on the web (for what THATS worth) that these things
>> ever actually existed. Per our last, er, um, discussion + input from
>> my wife's second cousin's husband (you remember him, Right??)
>> on the the subject these rumours may be refering to the Mighty Mite
>> vehicle-
>>
>> http://www.4wdonline.com/Mil/M422/MightyMite.html
>>
>> Fondest Regards,
>>
>> H.
12-11-2005, 09:08 PM
#37
Guest
Posts: n/a
Re: M151 MUTT replica kit
Umm, welding them back togeather *is* what they do, as per our
previous missives mentioning my wife's second cousin's husband's (you
remember him, Right??) project.
Here's some documentary evidence by way of a MUTT I found sitting in a
parking lot one day,
http://www.tantel.ca/Images/M151%20MUTT%20PICS/
I'd like to bring to your attention pics 3 & 4 in particular, those
funny looking verticle bumps on the rockers is where it was cut into
*Three* sections (like in this link from the last message
http://www.sphynx.com/mitymite/m151half.html: )
& welded back togeather.
And, yes, although it doesn't show in the pics it was quite definately
Rusty.
Waiting Patiently,
H.
On Sun, 11 Dec 2005 16:47:17 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> If their bodies were made of steel, cutting them in half wouldn't
>have been a problem, they'd just weld the ends back together as most
>Japanese ricers are salvaged.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Howard Eisenhauer wrote:
>>
>> My Senility?? Darn, I had forgotten all 'bout that :(.
>>
>> My pre-mature, er, um, whatever we were talking about not-withstanding
>> a bit of research reveals that M151 Mutts were, with very few
>> exceptions, buit with steel bodies.
>>
>> try this web site instead-
>>
>> http://www.geocities.com/fordm151/
>>
>> Per
>> http://autos.groups.yahoo.com/group/...2?viscount=100
>> Ford didn't go with the aluminium body due to problems with stress
>> cracking. It also sems there would have been corrosion problems
>> between the aluminium & steel components. as all the the MUTTS I've
>> seen have been rusted, not corroded I stand by my assertation that
>> M151s awere, for all practicle intents & purposes, Steel, nor
>> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>>
>> http://www.sphynx.com/mitymite/m151half.html
>>
>> The exceptions may have been some speacial "airbourne" models which
>> may or may not have seen actual service. I have not been able to find
>> any references on the web (for what THATS worth) that these things
>> ever actually existed. Per our last, er, um, discussion + input from
>> my wife's second cousin's husband (you remember him, Right??)
>> on the the subject these rumours may be refering to the Mighty Mite
>> vehicle-
>>
>> http://www.4wdonline.com/Mil/M422/MightyMite.html
>>
>> Fondest Regards,
>>
>> H.
previous missives mentioning my wife's second cousin's husband's (you
remember him, Right??) project.
Here's some documentary evidence by way of a MUTT I found sitting in a
parking lot one day,
http://www.tantel.ca/Images/M151%20MUTT%20PICS/
I'd like to bring to your attention pics 3 & 4 in particular, those
funny looking verticle bumps on the rockers is where it was cut into
*Three* sections (like in this link from the last message
http://www.sphynx.com/mitymite/m151half.html: )
& welded back togeather.
And, yes, although it doesn't show in the pics it was quite definately
Rusty.
Waiting Patiently,
H.
On Sun, 11 Dec 2005 16:47:17 -0800, L.W.(ßill) ------ III
<----------@***.net> wrote:
> If their bodies were made of steel, cutting them in half wouldn't
>have been a problem, they'd just weld the ends back together as most
>Japanese ricers are salvaged.
> God Bless America, Bill O|||||||O
>mailto:-------------------- http://www.----------.com/
>
>Howard Eisenhauer wrote:
>>
>> My Senility?? Darn, I had forgotten all 'bout that :(.
>>
>> My pre-mature, er, um, whatever we were talking about not-withstanding
>> a bit of research reveals that M151 Mutts were, with very few
>> exceptions, buit with steel bodies.
>>
>> try this web site instead-
>>
>> http://www.geocities.com/fordm151/
>>
>> Per
>> http://autos.groups.yahoo.com/group/...2?viscount=100
>> Ford didn't go with the aluminium body due to problems with stress
>> cracking. It also sems there would have been corrosion problems
>> between the aluminium & steel components. as all the the MUTTS I've
>> seen have been rusted, not corroded I stand by my assertation that
>> M151s awere, for all practicle intents & purposes, Steel, nor
>> Aluminium. For some pictures of rather rusty MUTTS I'd suggest-
>>
>> http://www.sphynx.com/mitymite/m151half.html
>>
>> The exceptions may have been some speacial "airbourne" models which
>> may or may not have seen actual service. I have not been able to find
>> any references on the web (for what THATS worth) that these things
>> ever actually existed. Per our last, er, um, discussion + input from
>> my wife's second cousin's husband (you remember him, Right??)
>> on the the subject these rumours may be refering to the Mighty Mite
>> vehicle-
>>
>> http://www.4wdonline.com/Mil/M422/MightyMite.html
>>
>> Fondest Regards,
>>
>> H.
12-11-2005, 09:35 PM
#38
Guest
Posts: n/a
Re: M151 MUTT replica kit
Howard Eisenhauer wrote:
> Umm, welding them back togeather *is* what they do, as per our
> previous missives mentioning my wife's second cousin's husband's (you
> remember him, Right??) project.
>
> Here's some documentary evidence by way of a MUTT I found sitting in a
> parking lot one day,
>
> http://www.tantel.ca/Images/M151%20MUTT%20PICS/
>
> I'd like to bring to your attention pics 3 & 4 in particular, those
> funny looking verticle bumps on the rockers is where it was cut into
> *Three* sections (like in this link from the last message
> http://www.sphynx.com/mitymite/m151half.html: )
> & welded back togeather.
They run tanks over them now.
12-11-2005, 09:35 PM
#39
Guest
Posts: n/a
Re: M151 MUTT replica kit
Howard Eisenhauer wrote:
> Umm, welding them back togeather *is* what they do, as per our
> previous missives mentioning my wife's second cousin's husband's (you
> remember him, Right??) project.
>
> Here's some documentary evidence by way of a MUTT I found sitting in a
> parking lot one day,
>
> http://www.tantel.ca/Images/M151%20MUTT%20PICS/
>
> I'd like to bring to your attention pics 3 & 4 in particular, those
> funny looking verticle bumps on the rockers is where it was cut into
> *Three* sections (like in this link from the last message
> http://www.sphynx.com/mitymite/m151half.html: )
> & welded back togeather.
They run tanks over them now.
12-11-2005, 09:35 PM
#40
Guest
Posts: n/a
Re: M151 MUTT replica kit
Howard Eisenhauer wrote:
> Umm, welding them back togeather *is* what they do, as per our
> previous missives mentioning my wife's second cousin's husband's (you
> remember him, Right??) project.
>
> Here's some documentary evidence by way of a MUTT I found sitting in a
> parking lot one day,
>
> http://www.tantel.ca/Images/M151%20MUTT%20PICS/
>
> I'd like to bring to your attention pics 3 & 4 in particular, those
> funny looking verticle bumps on the rockers is where it was cut into
> *Three* sections (like in this link from the last message
> http://www.sphynx.com/mitymite/m151half.html: )
> & welded back togeather.
They run tanks over them now.
