M.O.R.E. SHACKLE QUESTION
09-04-2007, 08:41 AM
#1
Guest
Posts: n/a
M.O.R.E. SHACKLE QUESTION
On my '84 Scrambler - I just installed front/rear MORE shackles -
there's an extra bolt w/sleeve for each shackle set, which I first
thought to be the hanger/bolt for the other side of each set of
springs (and couldn't figure out what the sleeve was for).
Then it came to me that the sleeve would fit in the middle hole of the
bracket and tried it on the rear - but it doesn't seem needed (steel's
already thicker than the stock, and it causes a little bulging in the
center as the bushing is just an 1/8 inch or so too long.
Thanks in advance...if anybody's interested - the shackles went on w/
out a problem (old & original were a bear to take out). Ride much
improved.
there's an extra bolt w/sleeve for each shackle set, which I first
thought to be the hanger/bolt for the other side of each set of
springs (and couldn't figure out what the sleeve was for).
Then it came to me that the sleeve would fit in the middle hole of the
bracket and tried it on the rear - but it doesn't seem needed (steel's
already thicker than the stock, and it causes a little bulging in the
center as the bushing is just an 1/8 inch or so too long.
Thanks in advance...if anybody's interested - the shackles went on w/
out a problem (old & original were a bear to take out). Ride much
improved.
09-04-2007, 10:02 AM
#2
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
I installed their heavy duty shackles a couple years ago, rediculiosly
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
09-04-2007, 10:02 AM
#3
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
I installed their heavy duty shackles a couple years ago, rediculiosly
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
09-04-2007, 10:02 AM
#4
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
I installed their heavy duty shackles a couple years ago, rediculiosly
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
09-04-2007, 10:02 AM
#5
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
I installed their heavy duty shackles a couple years ago, rediculiosly
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
heavy duty compaired to stock, anyway I didn't have any extra parts, just
shackle nut/bolt.
"duna6430" <duna6430@gmail.com> wrote in message
news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
> On my '84 Scrambler - I just installed front/rear MORE shackles -
> there's an extra bolt w/sleeve for each shackle set, which I first
> thought to be the hanger/bolt for the other side of each set of
> springs (and couldn't figure out what the sleeve was for).
>
> Then it came to me that the sleeve would fit in the middle hole of the
> bracket and tried it on the rear - but it doesn't seem needed (steel's
> already thicker than the stock, and it causes a little bulging in the
> center as the bushing is just an 1/8 inch or so too long.
>
> Thanks in advance...if anybody's interested - the shackles went on w/
> out a problem (old & original were a bear to take out). Ride much
> improved.
>
09-04-2007, 03:03 PM
#6
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
A center brace?
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
09-04-2007, 03:03 PM
#7
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
A center brace?
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
09-04-2007, 03:03 PM
#8
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
A center brace?
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
09-04-2007, 03:03 PM
#9
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
A center brace?
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
http://www.mountainoffroad.com/catal...lubeshacks.htm
"Greg" <greglc84@hotmail.com> wrote in message
news:fAdDi.126337$rX4.21860@pd7urf2no...
> I installed their heavy duty shackles a couple years ago,
> rediculiosly heavy duty compaired to stock, anyway I didn't
> have any extra parts, just shackle nut/bolt.
>
> "duna6430" <duna6430@gmail.com> wrote in message
> news:1188909707.619267.188250@19g2000hsx.googlegro ups.com...
>> On my '84 Scrambler - I just installed front/rear MORE
>> shackles -
>> there's an extra bolt w/sleeve for each shackle set, which I
>> first
>> thought to be the hanger/bolt for the other side of each set
>> of
>> springs (and couldn't figure out what the sleeve was for).
>>
>> Then it came to me that the sleeve would fit in the middle
>> hole of the
>> bracket and tried it on the rear - but it doesn't seem needed
>> (steel's
>> already thicker than the stock, and it causes a little bulging
>> in the
>> center as the bushing is just an 1/8 inch or so too long.
>>
>> Thanks in advance...if anybody's interested - the shackles
>> went on w/
>> out a problem (old & original were a bear to take out). Ride
>> much
>> improved.
>>
>
>
09-07-2007, 10:26 PM
#10
Guest
Posts: n/a
Re: M.O.R.E. SHACKLE QUESTION
Greg & Frank -
Thanks! After your link Greg I did some peeking under a few jeeps
I've seen in and around Memphis, and found a couple with the MORE
installed, and sure enough, my hunch was right after all. One had the
distortion/bowing like mine ended up with, and another had some newer
leaf springs (wider - so there was no bowing at all).
Despite the bow, I'm going back under it this weekend if I get the
chance for some new shocks.
Thanks again for the posts - looking forward to learning more as I go
along...
duna sends...
Thanks! After your link Greg I did some peeking under a few jeeps
I've seen in and around Memphis, and found a couple with the MORE
installed, and sure enough, my hunch was right after all. One had the
distortion/bowing like mine ended up with, and another had some newer
leaf springs (wider - so there was no bowing at all).
Despite the bow, I'm going back under it this weekend if I get the
chance for some new shocks.
Thanks again for the posts - looking forward to learning more as I go
along...
duna sends...