Lug torque question?
Guest
Posts: n/a
Re: Lug torque question?
In response to the remark about rotor warpage, that is and has been an issue
for all carmakers for the last dozen years or so. It is important to torque
evenly and with a good pattern. I torque most everything to 100ft/lbs with
a torque stick or a torque wrench.
Jerry
"DougW" <post.replies@invalid.address> wrote in message
news:7T71c.23728$1k.9161@okepread01...
> Danny Boy did pass the time by typing:
> > What do most of you sent your lug-nut torque to?
> > My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
> >
> > Just curious where in that range I should be.
>
> As long as they all are the same on each rim.
>
> FWIW, I use 95 ft.lbs
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
for all carmakers for the last dozen years or so. It is important to torque
evenly and with a good pattern. I torque most everything to 100ft/lbs with
a torque stick or a torque wrench.
Jerry
"DougW" <post.replies@invalid.address> wrote in message
news:7T71c.23728$1k.9161@okepread01...
> Danny Boy did pass the time by typing:
> > What do most of you sent your lug-nut torque to?
> > My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
> >
> > Just curious where in that range I should be.
>
> As long as they all are the same on each rim.
>
> FWIW, I use 95 ft.lbs
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
Guest
Posts: n/a
Re: Lug torque question?
In response to the remark about rotor warpage, that is and has been an issue
for all carmakers for the last dozen years or so. It is important to torque
evenly and with a good pattern. I torque most everything to 100ft/lbs with
a torque stick or a torque wrench.
Jerry
"DougW" <post.replies@invalid.address> wrote in message
news:7T71c.23728$1k.9161@okepread01...
> Danny Boy did pass the time by typing:
> > What do most of you sent your lug-nut torque to?
> > My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
> >
> > Just curious where in that range I should be.
>
> As long as they all are the same on each rim.
>
> FWIW, I use 95 ft.lbs
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
for all carmakers for the last dozen years or so. It is important to torque
evenly and with a good pattern. I torque most everything to 100ft/lbs with
a torque stick or a torque wrench.
Jerry
"DougW" <post.replies@invalid.address> wrote in message
news:7T71c.23728$1k.9161@okepread01...
> Danny Boy did pass the time by typing:
> > What do most of you sent your lug-nut torque to?
> > My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
> >
> > Just curious where in that range I should be.
>
> As long as they all are the same on each rim.
>
> FWIW, I use 95 ft.lbs
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
Guest
Posts: n/a
Re: Lug torque question?
In response to the remark about rotor warpage, that is and has been an issue
for all carmakers for the last dozen years or so. It is important to torque
evenly and with a good pattern. I torque most everything to 100ft/lbs with
a torque stick or a torque wrench.
Jerry
"DougW" <post.replies@invalid.address> wrote in message
news:7T71c.23728$1k.9161@okepread01...
> Danny Boy did pass the time by typing:
> > What do most of you sent your lug-nut torque to?
> > My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
> >
> > Just curious where in that range I should be.
>
> As long as they all are the same on each rim.
>
> FWIW, I use 95 ft.lbs
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
for all carmakers for the last dozen years or so. It is important to torque
evenly and with a good pattern. I torque most everything to 100ft/lbs with
a torque stick or a torque wrench.
Jerry
"DougW" <post.replies@invalid.address> wrote in message
news:7T71c.23728$1k.9161@okepread01...
> Danny Boy did pass the time by typing:
> > What do most of you sent your lug-nut torque to?
> > My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
> >
> > Just curious where in that range I should be.
>
> As long as they all are the same on each rim.
>
> FWIW, I use 95 ft.lbs
>
>
> --
> -- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
> HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
> Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
>
>
Guest
Posts: n/a
Re: Lug torque question?
Roughly 3/2/04 07:00, Danny Boy's monkeys randomly typed:
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
Somewhere between 80 and 115 ft-lbs should do it.
Figure if you set it to the middle of that range, a torque wrench off
by 17.5 pounds will still be in the range.
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
Somewhere between 80 and 115 ft-lbs should do it.
Figure if you set it to the middle of that range, a torque wrench off
by 17.5 pounds will still be in the range.
Guest
Posts: n/a
Re: Lug torque question?
Roughly 3/2/04 07:00, Danny Boy's monkeys randomly typed:
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
Somewhere between 80 and 115 ft-lbs should do it.
Figure if you set it to the middle of that range, a torque wrench off
by 17.5 pounds will still be in the range.
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
Somewhere between 80 and 115 ft-lbs should do it.
Figure if you set it to the middle of that range, a torque wrench off
by 17.5 pounds will still be in the range.
Guest
Posts: n/a
Re: Lug torque question?
Roughly 3/2/04 07:00, Danny Boy's monkeys randomly typed:
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
Somewhere between 80 and 115 ft-lbs should do it.
Figure if you set it to the middle of that range, a torque wrench off
by 17.5 pounds will still be in the range.
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
Somewhere between 80 and 115 ft-lbs should do it.
Figure if you set it to the middle of that range, a torque wrench off
by 17.5 pounds will still be in the range.
Thread
Thread Starter
Forum
Replies
Last Post
jeep videos
Jeep Videos - Pictures
0
Mar 28, 2008 08:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
