Lug torque question?
Guest
Posts: n/a
Re: Lug torque question?
Just changed the rotors on my CHEVY - torqued to 100 foot pounds (though
that was a huge amount - but that was what was recommended) - normally
torque my TJ to about ... uggh ... that tight ... hahahaha just kiddin - I
hit about 50 foot pounds ~D
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)
03 Wrangler TJ se 4WD
00 Chevy S-10 4WD
95 Virago XV750
If you really want to e-mail me direct...
please make the subject line say
"this is not spam" or else, I won't get it...
don't send me spam under the guise of not being spam, unless you want
reported... and is loosing your IP, or e-mail address worth it? ~dave
"Danny Boy" <nomail@4me.com> wrote in message
news:4044a1ab$1@news.gvsu.edu...
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
>
> thanks.
>
>
that was a huge amount - but that was what was recommended) - normally
torque my TJ to about ... uggh ... that tight ... hahahaha just kiddin - I
hit about 50 foot pounds ~D
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)
03 Wrangler TJ se 4WD
00 Chevy S-10 4WD
95 Virago XV750
If you really want to e-mail me direct...
please make the subject line say
"this is not spam" or else, I won't get it...
don't send me spam under the guise of not being spam, unless you want
reported... and is loosing your IP, or e-mail address worth it? ~dave
"Danny Boy" <nomail@4me.com> wrote in message
news:4044a1ab$1@news.gvsu.edu...
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
>
> thanks.
>
>
Guest
Posts: n/a
Re: Lug torque question?
Just changed the rotors on my CHEVY - torqued to 100 foot pounds (though
that was a huge amount - but that was what was recommended) - normally
torque my TJ to about ... uggh ... that tight ... hahahaha just kiddin - I
hit about 50 foot pounds ~D
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)
03 Wrangler TJ se 4WD
00 Chevy S-10 4WD
95 Virago XV750
If you really want to e-mail me direct...
please make the subject line say
"this is not spam" or else, I won't get it...
don't send me spam under the guise of not being spam, unless you want
reported... and is loosing your IP, or e-mail address worth it? ~dave
"Danny Boy" <nomail@4me.com> wrote in message
news:4044a1ab$1@news.gvsu.edu...
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
>
> thanks.
>
>
that was a huge amount - but that was what was recommended) - normally
torque my TJ to about ... uggh ... that tight ... hahahaha just kiddin - I
hit about 50 foot pounds ~D
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)
03 Wrangler TJ se 4WD
00 Chevy S-10 4WD
95 Virago XV750
If you really want to e-mail me direct...
please make the subject line say
"this is not spam" or else, I won't get it...
don't send me spam under the guise of not being spam, unless you want
reported... and is loosing your IP, or e-mail address worth it? ~dave
"Danny Boy" <nomail@4me.com> wrote in message
news:4044a1ab$1@news.gvsu.edu...
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
>
> thanks.
>
>
Guest
Posts: n/a
Re: Lug torque question?
Just changed the rotors on my CHEVY - torqued to 100 foot pounds (though
that was a huge amount - but that was what was recommended) - normally
torque my TJ to about ... uggh ... that tight ... hahahaha just kiddin - I
hit about 50 foot pounds ~D
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)
03 Wrangler TJ se 4WD
00 Chevy S-10 4WD
95 Virago XV750
If you really want to e-mail me direct...
please make the subject line say
"this is not spam" or else, I won't get it...
don't send me spam under the guise of not being spam, unless you want
reported... and is loosing your IP, or e-mail address worth it? ~dave
"Danny Boy" <nomail@4me.com> wrote in message
news:4044a1ab$1@news.gvsu.edu...
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
>
> thanks.
>
>
that was a huge amount - but that was what was recommended) - normally
torque my TJ to about ... uggh ... that tight ... hahahaha just kiddin - I
hit about 50 foot pounds ~D
--
o_o_o_o
/| ,[_____],
|ŻŻŻL --O|||||||O-
()_)Ż()_) ŻŻŻ )_)
03 Wrangler TJ se 4WD
00 Chevy S-10 4WD
95 Virago XV750
If you really want to e-mail me direct...
please make the subject line say
"this is not spam" or else, I won't get it...
don't send me spam under the guise of not being spam, unless you want
reported... and is loosing your IP, or e-mail address worth it? ~dave
"Danny Boy" <nomail@4me.com> wrote in message
news:4044a1ab$1@news.gvsu.edu...
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
>
> thanks.
>
>
Guest
Posts: n/a
Re: Lug torque question?
On Tue, 2 Mar 2004 10:00:59 -0500, "Danny Boy" wrote:
>What do most of you sent your lug-nut torque to?
>My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>Just curious where in that range I should be.
The consensus here a couple of years ago is that it doesn't matter
where in the range you choose, the important thing is to torque them
all the same. In other words, if one lug nut is torqued to 80, then
all should be torqued to 80. Same with 115 or any number you choose.
Back then (1999 plus or minus a year or two) there was an issue with
warped rotors that seemed to be related to lugnuts that weren't
equally torqued (especially on Grands). I've lost track though and
don't know if warped rotors are still an issue or not (hopefully DC
has improved the rotors by now).
Rick
--
HeBeJeepN
'99 XJ, Selec-Trac, Trac-Lok
>What do most of you sent your lug-nut torque to?
>My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>Just curious where in that range I should be.
The consensus here a couple of years ago is that it doesn't matter
where in the range you choose, the important thing is to torque them
all the same. In other words, if one lug nut is torqued to 80, then
all should be torqued to 80. Same with 115 or any number you choose.
Back then (1999 plus or minus a year or two) there was an issue with
warped rotors that seemed to be related to lugnuts that weren't
equally torqued (especially on Grands). I've lost track though and
don't know if warped rotors are still an issue or not (hopefully DC
has improved the rotors by now).
Rick
--
HeBeJeepN
'99 XJ, Selec-Trac, Trac-Lok
Guest
Posts: n/a
Re: Lug torque question?
On Tue, 2 Mar 2004 10:00:59 -0500, "Danny Boy" wrote:
>What do most of you sent your lug-nut torque to?
>My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>Just curious where in that range I should be.
The consensus here a couple of years ago is that it doesn't matter
where in the range you choose, the important thing is to torque them
all the same. In other words, if one lug nut is torqued to 80, then
all should be torqued to 80. Same with 115 or any number you choose.
Back then (1999 plus or minus a year or two) there was an issue with
warped rotors that seemed to be related to lugnuts that weren't
equally torqued (especially on Grands). I've lost track though and
don't know if warped rotors are still an issue or not (hopefully DC
has improved the rotors by now).
Rick
--
HeBeJeepN
'99 XJ, Selec-Trac, Trac-Lok
>What do most of you sent your lug-nut torque to?
>My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>Just curious where in that range I should be.
The consensus here a couple of years ago is that it doesn't matter
where in the range you choose, the important thing is to torque them
all the same. In other words, if one lug nut is torqued to 80, then
all should be torqued to 80. Same with 115 or any number you choose.
Back then (1999 plus or minus a year or two) there was an issue with
warped rotors that seemed to be related to lugnuts that weren't
equally torqued (especially on Grands). I've lost track though and
don't know if warped rotors are still an issue or not (hopefully DC
has improved the rotors by now).
Rick
--
HeBeJeepN
'99 XJ, Selec-Trac, Trac-Lok
Guest
Posts: n/a
Re: Lug torque question?
On Tue, 2 Mar 2004 10:00:59 -0500, "Danny Boy" wrote:
>What do most of you sent your lug-nut torque to?
>My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>Just curious where in that range I should be.
The consensus here a couple of years ago is that it doesn't matter
where in the range you choose, the important thing is to torque them
all the same. In other words, if one lug nut is torqued to 80, then
all should be torqued to 80. Same with 115 or any number you choose.
Back then (1999 plus or minus a year or two) there was an issue with
warped rotors that seemed to be related to lugnuts that weren't
equally torqued (especially on Grands). I've lost track though and
don't know if warped rotors are still an issue or not (hopefully DC
has improved the rotors by now).
Rick
--
HeBeJeepN
'99 XJ, Selec-Trac, Trac-Lok
>What do most of you sent your lug-nut torque to?
>My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>Just curious where in that range I should be.
The consensus here a couple of years ago is that it doesn't matter
where in the range you choose, the important thing is to torque them
all the same. In other words, if one lug nut is torqued to 80, then
all should be torqued to 80. Same with 115 or any number you choose.
Back then (1999 plus or minus a year or two) there was an issue with
warped rotors that seemed to be related to lugnuts that weren't
equally torqued (especially on Grands). I've lost track though and
don't know if warped rotors are still an issue or not (hopefully DC
has improved the rotors by now).
Rick
--
HeBeJeepN
'99 XJ, Selec-Trac, Trac-Lok
Guest
Posts: n/a
Re: Lug torque question?
Danny Boy did pass the time by typing:
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
As long as they all are the same on each rim.
FWIW, I use 95 ft.lbs
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
As long as they all are the same on each rim.
FWIW, I use 95 ft.lbs
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Guest
Posts: n/a
Re: Lug torque question?
Danny Boy did pass the time by typing:
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
As long as they all are the same on each rim.
FWIW, I use 95 ft.lbs
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
As long as they all are the same on each rim.
FWIW, I use 95 ft.lbs
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
Guest
Posts: n/a
Re: Lug torque question?
Danny Boy did pass the time by typing:
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
As long as they all are the same on each rim.
FWIW, I use 95 ft.lbs
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
> What do most of you sent your lug-nut torque to?
> My 04 Grand cherokee manual states to set them between 80 - 115 ft. lbs.
>
> Just curious where in that range I should be.
As long as they all are the same on each rim.
FWIW, I use 95 ft.lbs
--
-- DougW -- 93 ZJ 4.0 http://members.***.net/wilsond
HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks
Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors
