Lubelocker differential gaskets.. Used one?
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
I was thinking of going with those gaskets as my rear diff seal has started
leaking AGAIN. And I know I got a good seal... the only way I seem to be
able to get ALL of the old RTV off is with a wire wheel and a drill. The
chemicals never quite work and a putty knife doesn't either...
How do you get it off?
Eric
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41956837.1D0155F8@***.net...
> Ditto, once I learn to remove any petroleum residue with alcohol.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mabar wrote:
>>
>> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
>> So
>> far, no leaks.
>>
>> http://tinyurl.com/5eovg
>>
>> Tom
leaking AGAIN. And I know I got a good seal... the only way I seem to be
able to get ALL of the old RTV off is with a wire wheel and a drill. The
chemicals never quite work and a putty knife doesn't either...
How do you get it off?
Eric
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41956837.1D0155F8@***.net...
> Ditto, once I learn to remove any petroleum residue with alcohol.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mabar wrote:
>>
>> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
>> So
>> far, no leaks.
>>
>> http://tinyurl.com/5eovg
>>
>> Tom
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
I was thinking of going with those gaskets as my rear diff seal has started
leaking AGAIN. And I know I got a good seal... the only way I seem to be
able to get ALL of the old RTV off is with a wire wheel and a drill. The
chemicals never quite work and a putty knife doesn't either...
How do you get it off?
Eric
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41956837.1D0155F8@***.net...
> Ditto, once I learn to remove any petroleum residue with alcohol.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mabar wrote:
>>
>> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
>> So
>> far, no leaks.
>>
>> http://tinyurl.com/5eovg
>>
>> Tom
leaking AGAIN. And I know I got a good seal... the only way I seem to be
able to get ALL of the old RTV off is with a wire wheel and a drill. The
chemicals never quite work and a putty knife doesn't either...
How do you get it off?
Eric
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41956837.1D0155F8@***.net...
> Ditto, once I learn to remove any petroleum residue with alcohol.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mabar wrote:
>>
>> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
>> So
>> far, no leaks.
>>
>> http://tinyurl.com/5eovg
>>
>> Tom
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
I was thinking of going with those gaskets as my rear diff seal has started
leaking AGAIN. And I know I got a good seal... the only way I seem to be
able to get ALL of the old RTV off is with a wire wheel and a drill. The
chemicals never quite work and a putty knife doesn't either...
How do you get it off?
Eric
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41956837.1D0155F8@***.net...
> Ditto, once I learn to remove any petroleum residue with alcohol.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mabar wrote:
>>
>> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
>> So
>> far, no leaks.
>>
>> http://tinyurl.com/5eovg
>>
>> Tom
leaking AGAIN. And I know I got a good seal... the only way I seem to be
able to get ALL of the old RTV off is with a wire wheel and a drill. The
chemicals never quite work and a putty knife doesn't either...
How do you get it off?
Eric
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:41956837.1D0155F8@***.net...
> Ditto, once I learn to remove any petroleum residue with alcohol.
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> mabar wrote:
>>
>> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
>> So
>> far, no leaks.
>>
>> http://tinyurl.com/5eovg
>>
>> Tom
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
Hi Eric,
When I think, "Room Temperature Vulcanizing" I think Permatex
silicone, which never hardens. I haven't seen anything that I had to
chip off since the fifties, black stuff we brushed on. Usually if it
doesn't pull off like a rubber band, I slide a paint scraper sideways
and it just peels off: http://www.----------.com/scraper.jpg then plane
it with a file.
God Bless America, ßill O|||||||O
mailto:--------------------
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
When I think, "Room Temperature Vulcanizing" I think Permatex
silicone, which never hardens. I haven't seen anything that I had to
chip off since the fifties, black stuff we brushed on. Usually if it
doesn't pull off like a rubber band, I slide a paint scraper sideways
and it just peels off: http://www.----------.com/scraper.jpg then plane
it with a file.
God Bless America, ßill O|||||||O
mailto:--------------------
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
Hi Eric,
When I think, "Room Temperature Vulcanizing" I think Permatex
silicone, which never hardens. I haven't seen anything that I had to
chip off since the fifties, black stuff we brushed on. Usually if it
doesn't pull off like a rubber band, I slide a paint scraper sideways
and it just peels off: http://www.----------.com/scraper.jpg then plane
it with a file.
God Bless America, ßill O|||||||O
mailto:--------------------
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
When I think, "Room Temperature Vulcanizing" I think Permatex
silicone, which never hardens. I haven't seen anything that I had to
chip off since the fifties, black stuff we brushed on. Usually if it
doesn't pull off like a rubber band, I slide a paint scraper sideways
and it just peels off: http://www.----------.com/scraper.jpg then plane
it with a file.
God Bless America, ßill O|||||||O
mailto:--------------------
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
Hi Eric,
When I think, "Room Temperature Vulcanizing" I think Permatex
silicone, which never hardens. I haven't seen anything that I had to
chip off since the fifties, black stuff we brushed on. Usually if it
doesn't pull off like a rubber band, I slide a paint scraper sideways
and it just peels off: http://www.----------.com/scraper.jpg then plane
it with a file.
God Bless America, ßill O|||||||O
mailto:--------------------
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
When I think, "Room Temperature Vulcanizing" I think Permatex
silicone, which never hardens. I haven't seen anything that I had to
chip off since the fifties, black stuff we brushed on. Usually if it
doesn't pull off like a rubber band, I slide a paint scraper sideways
and it just peels off: http://www.----------.com/scraper.jpg then plane
it with a file.
God Bless America, ßill O|||||||O
mailto:--------------------
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
I have good luck with a one edge razor blade, then I finish up with a
wire wheel on a drill. :-) I prefer the brass wire wheel because it
doesn't scratch the steel.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:41956837.1D0155F8@***.net...
> > Ditto, once I learn to remove any petroleum residue with alcohol.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mabar wrote:
> >>
> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
> >> So
> >> far, no leaks.
> >>
> >> http://tinyurl.com/5eovg
> >>
> >> Tom
wire wheel on a drill. :-) I prefer the brass wire wheel because it
doesn't scratch the steel.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:41956837.1D0155F8@***.net...
> > Ditto, once I learn to remove any petroleum residue with alcohol.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mabar wrote:
> >>
> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
> >> So
> >> far, no leaks.
> >>
> >> http://tinyurl.com/5eovg
> >>
> >> Tom
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
I have good luck with a one edge razor blade, then I finish up with a
wire wheel on a drill. :-) I prefer the brass wire wheel because it
doesn't scratch the steel.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:41956837.1D0155F8@***.net...
> > Ditto, once I learn to remove any petroleum residue with alcohol.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mabar wrote:
> >>
> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
> >> So
> >> far, no leaks.
> >>
> >> http://tinyurl.com/5eovg
> >>
> >> Tom
wire wheel on a drill. :-) I prefer the brass wire wheel because it
doesn't scratch the steel.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:41956837.1D0155F8@***.net...
> > Ditto, once I learn to remove any petroleum residue with alcohol.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mabar wrote:
> >>
> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
> >> So
> >> far, no leaks.
> >>
> >> http://tinyurl.com/5eovg
> >>
> >> Tom
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
I have good luck with a one edge razor blade, then I finish up with a
wire wheel on a drill. :-) I prefer the brass wire wheel because it
doesn't scratch the steel.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:41956837.1D0155F8@***.net...
> > Ditto, once I learn to remove any petroleum residue with alcohol.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mabar wrote:
> >>
> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
> >> So
> >> far, no leaks.
> >>
> >> http://tinyurl.com/5eovg
> >>
> >> Tom
wire wheel on a drill. :-) I prefer the brass wire wheel because it
doesn't scratch the steel.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Eric wrote:
>
> I was thinking of going with those gaskets as my rear diff seal has started
> leaking AGAIN. And I know I got a good seal... the only way I seem to be
> able to get ALL of the old RTV off is with a wire wheel and a drill. The
> chemicals never quite work and a putty knife doesn't either...
>
> How do you get it off?
>
> Eric
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:41956837.1D0155F8@***.net...
> > Ditto, once I learn to remove any petroleum residue with alcohol.
> > God Bless America, ßill O|||||||O
> > mailto:-------------------- http://www.----------.com/
> >
> > mabar wrote:
> >>
> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles ago.
> >> So
> >> far, no leaks.
> >>
> >> http://tinyurl.com/5eovg
> >>
> >> Tom
Guest
Posts: n/a
Re: Lubelocker differential gaskets.. Used one?
Maybe that's my problem.. I didn't use a brass wire wheel the first time I
did it and scratched the steel. Both surfaces were shiny as new though...
Eric
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4196129C.48D40F29@sympatico.ca...
>I have good luck with a one edge razor blade, then I finish up with a
> wire wheel on a drill. :-) I prefer the brass wire wheel because it
> doesn't scratch the steel.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Eric wrote:
>>
>> I was thinking of going with those gaskets as my rear diff seal has
>> started
>> leaking AGAIN. And I know I got a good seal... the only way I seem to be
>> able to get ALL of the old RTV off is with a wire wheel and a drill. The
>> chemicals never quite work and a putty knife doesn't either...
>>
>> How do you get it off?
>>
>> Eric
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:41956837.1D0155F8@***.net...
>> > Ditto, once I learn to remove any petroleum residue with alcohol.
>> > God Bless America, ßill O|||||||O
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > mabar wrote:
>> >>
>> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles
>> >> ago.
>> >> So
>> >> far, no leaks.
>> >>
>> >> http://tinyurl.com/5eovg
>> >>
>> >> Tom
did it and scratched the steel. Both surfaces were shiny as new though...
Eric
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4196129C.48D40F29@sympatico.ca...
>I have good luck with a one edge razor blade, then I finish up with a
> wire wheel on a drill. :-) I prefer the brass wire wheel because it
> doesn't scratch the steel.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Eric wrote:
>>
>> I was thinking of going with those gaskets as my rear diff seal has
>> started
>> leaking AGAIN. And I know I got a good seal... the only way I seem to be
>> able to get ALL of the old RTV off is with a wire wheel and a drill. The
>> chemicals never quite work and a putty knife doesn't either...
>>
>> How do you get it off?
>>
>> Eric
>> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
>> news:41956837.1D0155F8@***.net...
>> > Ditto, once I learn to remove any petroleum residue with alcohol.
>> > God Bless America, ßill O|||||||O
>> > mailto:-------------------- http://www.----------.com/
>> >
>> > mabar wrote:
>> >>
>> >> I used Permatex #77B Ultra Blue on both my diffs about 13000 miles
>> >> ago.
>> >> So
>> >> far, no leaks.
>> >>
>> >> http://tinyurl.com/5eovg
>> >>
>> >> Tom
