LubeLocker Differential gaskets ??
10-30-2004, 05:45 PM
#1
Guest
Posts: n/a
LubeLocker Differential gaskets ??
Any one used them?? Any comments. I have to change my differential fluid and
was thinking of using these to reseal.
http://www.lubelocker.com/
thanks,
JOHN
was thinking of using these to reseal.
http://www.lubelocker.com/
thanks,
JOHN
10-30-2004, 07:04 PM
#2
Guest
Posts: n/a
Re: LubeLocker Differential gaskets ??
John did pass the time by typing:
> Any one used them?? Any comments. I have to change my differential fluid and
> was thinking of using these to reseal.
>
>
> http://www.lubelocker.com/
Dunno. I tend to think loctite or permatex would work better
at sealing any warped covers. If yours are nice and flat it
should hold. Sealer is cheap and not as hard as that site says
it is to remove. Simple plastic putty knive is all I use.
--
DougW
> Any one used them?? Any comments. I have to change my differential fluid and
> was thinking of using these to reseal.
>
>
> http://www.lubelocker.com/
Dunno. I tend to think loctite or permatex would work better
at sealing any warped covers. If yours are nice and flat it
should hold. Sealer is cheap and not as hard as that site says
it is to remove. Simple plastic putty knive is all I use.
--
DougW
10-30-2004, 07:04 PM
#3
Guest
Posts: n/a
Re: LubeLocker Differential gaskets ??
John did pass the time by typing:
> Any one used them?? Any comments. I have to change my differential fluid and
> was thinking of using these to reseal.
>
>
> http://www.lubelocker.com/
Dunno. I tend to think loctite or permatex would work better
at sealing any warped covers. If yours are nice and flat it
should hold. Sealer is cheap and not as hard as that site says
it is to remove. Simple plastic putty knive is all I use.
--
DougW
> Any one used them?? Any comments. I have to change my differential fluid and
> was thinking of using these to reseal.
>
>
> http://www.lubelocker.com/
Dunno. I tend to think loctite or permatex would work better
at sealing any warped covers. If yours are nice and flat it
should hold. Sealer is cheap and not as hard as that site says
it is to remove. Simple plastic putty knive is all I use.
--
DougW
10-30-2004, 07:04 PM
#4
Guest
Posts: n/a
Re: LubeLocker Differential gaskets ??
John did pass the time by typing:
> Any one used them?? Any comments. I have to change my differential fluid and
> was thinking of using these to reseal.
>
>
> http://www.lubelocker.com/
Dunno. I tend to think loctite or permatex would work better
at sealing any warped covers. If yours are nice and flat it
should hold. Sealer is cheap and not as hard as that site says
it is to remove. Simple plastic putty knive is all I use.
--
DougW
> Any one used them?? Any comments. I have to change my differential fluid and
> was thinking of using these to reseal.
>
>
> http://www.lubelocker.com/
Dunno. I tend to think loctite or permatex would work better
at sealing any warped covers. If yours are nice and flat it
should hold. Sealer is cheap and not as hard as that site says
it is to remove. Simple plastic putty knive is all I use.
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
Rich Hampel
Jeep Mailing List
36
08-07-2005 07:11 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
