|
Lockers
Greetings.
I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC 20 rear end. I want to put a locker in it. Can someone direct me to one that will fit that axle? As well, what are the best as far as air, electric or mechanical. Also what might be the axle in front, Dana 30 perhaps? Thanks, Greg |
Re: Lockers
It's probably the D35 rear axle. Your best bet is a Lockright or other
'lunchbox' locker. Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174443941.973704.6920@b75g2000hsg.googlegrou ps.com... > Greetings. > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > 20 rear end. I want to put a locker in it. Can someone direct me to > one that will fit that axle? As well, what are the best as far as air, > electric or mechanical. Also what might be the axle in front, Dana 30 > perhaps? > > Thanks, > > Greg > |
Re: Lockers
It's probably the D35 rear axle. Your best bet is a Lockright or other
'lunchbox' locker. Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174443941.973704.6920@b75g2000hsg.googlegrou ps.com... > Greetings. > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > 20 rear end. I want to put a locker in it. Can someone direct me to > one that will fit that axle? As well, what are the best as far as air, > electric or mechanical. Also what might be the axle in front, Dana 30 > perhaps? > > Thanks, > > Greg > |
Re: Lockers
It's probably the D35 rear axle. Your best bet is a Lockright or other
'lunchbox' locker. Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174443941.973704.6920@b75g2000hsg.googlegrou ps.com... > Greetings. > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > 20 rear end. I want to put a locker in it. Can someone direct me to > one that will fit that axle? As well, what are the best as far as air, > electric or mechanical. Also what might be the axle in front, Dana 30 > perhaps? > > Thanks, > > Greg > |
Re: Lockers
On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> It's probably the D35 rear axle. Your best bet is a Lockright or other > 'lunchbox' locker. > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174443941.973704.6920@b75g2000hsg.googlegrou ps.com... > > > > > Greetings. > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > 20 rear end. I want to put a locker in it. Can someone direct me to > > one that will fit that axle? As well, what are the best as far as air, > > electric or mechanical. Also what might be the axle in front, Dana 30 > > perhaps? > > > Thanks, > > > Greg- Hide quoted text - > > - Show quoted text - I have a 95 Wrangler with a D35, and it is not the same axle. Greg |
Re: Lockers
On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> It's probably the D35 rear axle. Your best bet is a Lockright or other > 'lunchbox' locker. > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174443941.973704.6920@b75g2000hsg.googlegrou ps.com... > > > > > Greetings. > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > 20 rear end. I want to put a locker in it. Can someone direct me to > > one that will fit that axle? As well, what are the best as far as air, > > electric or mechanical. Also what might be the axle in front, Dana 30 > > perhaps? > > > Thanks, > > > Greg- Hide quoted text - > > - Show quoted text - I have a 95 Wrangler with a D35, and it is not the same axle. Greg |
Re: Lockers
On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> It's probably the D35 rear axle. Your best bet is a Lockright or other > 'lunchbox' locker. > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174443941.973704.6920@b75g2000hsg.googlegrou ps.com... > > > > > Greetings. > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > 20 rear end. I want to put a locker in it. Can someone direct me to > > one that will fit that axle? As well, what are the best as far as air, > > electric or mechanical. Also what might be the axle in front, Dana 30 > > perhaps? > > > Thanks, > > > Greg- Hide quoted text - > > - Show quoted text - I have a 95 Wrangler with a D35, and it is not the same axle. Greg |
Re: Lockers
On Mar 20, 9:43 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > > > > It's probably the D35 rear axle. Your best bet is a Lockright or other > > 'lunchbox' locker. > > > Carl > > > "jerryg" <Greggi...@msn.com> wrote in message > > >news:1174443941.973704.6920@b75g2000hsg.googlegro ups.com... > > > > Greetings. > > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > > 20 rear end. I want to put a locker in it. Can someone direct me to > > > one that will fit that axle? As well, what are the best as far as air, > > > electric or mechanical. Also what might be the axle in front, Dana 30 > > > perhaps? > > > > Thanks, > > > > Greg- Hide quoted text - > > > - Show quoted text - > > I have a 95 Wrangler with a D35, and it is not the same axle. > > Greg- Hide quoted text - > > - Show quoted text - I'm going to look at it now, you may be right. I don't know. Chrysler 8.25? Greg |
Re: Lockers
On Mar 20, 9:43 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > > > > It's probably the D35 rear axle. Your best bet is a Lockright or other > > 'lunchbox' locker. > > > Carl > > > "jerryg" <Greggi...@msn.com> wrote in message > > >news:1174443941.973704.6920@b75g2000hsg.googlegro ups.com... > > > > Greetings. > > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > > 20 rear end. I want to put a locker in it. Can someone direct me to > > > one that will fit that axle? As well, what are the best as far as air, > > > electric or mechanical. Also what might be the axle in front, Dana 30 > > > perhaps? > > > > Thanks, > > > > Greg- Hide quoted text - > > > - Show quoted text - > > I have a 95 Wrangler with a D35, and it is not the same axle. > > Greg- Hide quoted text - > > - Show quoted text - I'm going to look at it now, you may be right. I don't know. Chrysler 8.25? Greg |
Re: Lockers
On Mar 20, 9:43 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > > > > It's probably the D35 rear axle. Your best bet is a Lockright or other > > 'lunchbox' locker. > > > Carl > > > "jerryg" <Greggi...@msn.com> wrote in message > > >news:1174443941.973704.6920@b75g2000hsg.googlegro ups.com... > > > > Greetings. > > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > > 20 rear end. I want to put a locker in it. Can someone direct me to > > > one that will fit that axle? As well, what are the best as far as air, > > > electric or mechanical. Also what might be the axle in front, Dana 30 > > > perhaps? > > > > Thanks, > > > > Greg- Hide quoted text - > > > - Show quoted text - > > I have a 95 Wrangler with a D35, and it is not the same axle. > > Greg- Hide quoted text - > > - Show quoted text - I'm going to look at it now, you may be right. I don't know. Chrysler 8.25? Greg |
Re: Lockers
On Mar 20, 9:46 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 9:43 pm, "jerryg" <Greggi...@msn.com> wrote: > > > > > > > On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > It's probably the D35 rear axle. Your best bet is a Lockright or other > > > 'lunchbox' locker. > > > > Carl > > > > "jerryg" <Greggi...@msn.com> wrote in message > > > >news:1174443941.973704.6920@b75g2000hsg.googlegro ups.com... > > > > > Greetings. > > > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > > > 20 rear end. I want to put a locker in it. Can someone direct me to > > > > one that will fit that axle? As well, what are the best as far as air, > > > > electric or mechanical. Also what might be the axle in front, Dana 30 > > > > perhaps? > > > > > Thanks, > > > > > Greg- Hide quoted text - > > > > - Show quoted text - > > > I have a 95 Wrangler with a D35, and it is not the same axle. > > > Greg- Hide quoted text - > > > - Show quoted text - > > I'm going to look at it now, you may be right. I don't know. Chrysler > 8.25? > > Greg- Hide quoted text - > > - Show quoted text - I do believe your right. I think I'll look into Aussie lockers. Thanks, Greg |
Re: Lockers
On Mar 20, 9:46 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 9:43 pm, "jerryg" <Greggi...@msn.com> wrote: > > > > > > > On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > It's probably the D35 rear axle. Your best bet is a Lockright or other > > > 'lunchbox' locker. > > > > Carl > > > > "jerryg" <Greggi...@msn.com> wrote in message > > > >news:1174443941.973704.6920@b75g2000hsg.googlegro ups.com... > > > > > Greetings. > > > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > > > 20 rear end. I want to put a locker in it. Can someone direct me to > > > > one that will fit that axle? As well, what are the best as far as air, > > > > electric or mechanical. Also what might be the axle in front, Dana 30 > > > > perhaps? > > > > > Thanks, > > > > > Greg- Hide quoted text - > > > > - Show quoted text - > > > I have a 95 Wrangler with a D35, and it is not the same axle. > > > Greg- Hide quoted text - > > > - Show quoted text - > > I'm going to look at it now, you may be right. I don't know. Chrysler > 8.25? > > Greg- Hide quoted text - > > - Show quoted text - I do believe your right. I think I'll look into Aussie lockers. Thanks, Greg |
Re: Lockers
On Mar 20, 9:46 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 9:43 pm, "jerryg" <Greggi...@msn.com> wrote: > > > > > > > On Mar 20, 9:31 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > It's probably the D35 rear axle. Your best bet is a Lockright or other > > > 'lunchbox' locker. > > > > Carl > > > > "jerryg" <Greggi...@msn.com> wrote in message > > > >news:1174443941.973704.6920@b75g2000hsg.googlegro ups.com... > > > > > Greetings. > > > > > I have an 86 Cherokee (2.5L manual) with what I believe to be an AMC > > > > 20 rear end. I want to put a locker in it. Can someone direct me to > > > > one that will fit that axle? As well, what are the best as far as air, > > > > electric or mechanical. Also what might be the axle in front, Dana 30 > > > > perhaps? > > > > > Thanks, > > > > > Greg- Hide quoted text - > > > > - Show quoted text - > > > I have a 95 Wrangler with a D35, and it is not the same axle. > > > Greg- Hide quoted text - > > > - Show quoted text - > > I'm going to look at it now, you may be right. I don't know. Chrysler > 8.25? > > Greg- Hide quoted text - > > - Show quoted text - I do believe your right. I think I'll look into Aussie lockers. Thanks, Greg |
Re: Lockers
On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net>
wrote: > It will be the AMC 20, but they did use Dana 44s as they were going > under, Like Mike Romain's here:http://----------.com/mikeRomain/ The AMC > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > God Bless America, Bill 0|||||||0 > mailto:LW------...@aol.comhttp://www.----------.com/ > > "jerryg" <Greggi...@msn.com> wrote in message > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > 8.25? > > > Greg > > -- > Posted via a free Usenet account fromhttp://www.teranews.com Its a D35 Greg |
Re: Lockers
On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net>
wrote: > It will be the AMC 20, but they did use Dana 44s as they were going > under, Like Mike Romain's here:http://----------.com/mikeRomain/ The AMC > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > God Bless America, Bill 0|||||||0 > mailto:LW------...@aol.comhttp://www.----------.com/ > > "jerryg" <Greggi...@msn.com> wrote in message > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > 8.25? > > > Greg > > -- > Posted via a free Usenet account fromhttp://www.teranews.com Its a D35 Greg |
Re: Lockers
On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net>
wrote: > It will be the AMC 20, but they did use Dana 44s as they were going > under, Like Mike Romain's here:http://----------.com/mikeRomain/ The AMC > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > God Bless America, Bill 0|||||||0 > mailto:LW------...@aol.comhttp://www.----------.com/ > > "jerryg" <Greggi...@msn.com> wrote in message > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > 8.25? > > > Greg > > -- > Posted via a free Usenet account fromhttp://www.teranews.com Its a D35 Greg |
Re: Lockers
On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > wrote: > > > It will be the AMC 20, but they did use Dana 44s as they were going > > under, Like Mike Romain's here:http://----------.com/mikeRomain/The AMC > > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > God Bless America, Bill 0|||||||0 > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > "jerryg" <Greggi...@msn.com> wrote in message > > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > > 8.25? > > > > Greg > > > -- > > Posted via a free Usenet account fromhttp://www.teranews.com > > Its a D35 > > Greg Its the same as my yj Greg |
Re: Lockers
On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > wrote: > > > It will be the AMC 20, but they did use Dana 44s as they were going > > under, Like Mike Romain's here:http://----------.com/mikeRomain/The AMC > > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > God Bless America, Bill 0|||||||0 > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > "jerryg" <Greggi...@msn.com> wrote in message > > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > > 8.25? > > > > Greg > > > -- > > Posted via a free Usenet account fromhttp://www.teranews.com > > Its a D35 > > Greg Its the same as my yj Greg |
Re: Lockers
On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > wrote: > > > It will be the AMC 20, but they did use Dana 44s as they were going > > under, Like Mike Romain's here:http://----------.com/mikeRomain/The AMC > > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > God Bless America, Bill 0|||||||0 > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > "jerryg" <Greggi...@msn.com> wrote in message > > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > > 8.25? > > > > Greg > > > -- > > Posted via a free Usenet account fromhttp://www.teranews.com > > Its a D35 > > Greg Its the same as my yj Greg |
Re: Lockers
On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > > > > > > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > > wrote: > > > > It will be the AMC 20, but they did use Dana 44s as they were going > > > under, Like Mike Romain's here:http://----------.com/mikeRomain/TheAMC > > > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > > God Bless America, Bill 0|||||||0 > > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > > "jerryg" <Greggi...@msn.com> wrote in message > > > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > > > 8.25? > > > > > Greg > > > > -- > > > Posted via a free Usenet account fromhttp://www.teranews.com > > > Its a D35 > > > Greg > > Its the same as my yj > > Greg- Hide quoted text - > > - Show quoted text - I know in my prior post I said it was not the same as my yj, but I took a closer look, and it is. D30 up front. I also own a 2006 GC limited, 4.7 litre. What axle would that have? Greg |
Re: Lockers
On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > > > > > > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > > wrote: > > > > It will be the AMC 20, but they did use Dana 44s as they were going > > > under, Like Mike Romain's here:http://----------.com/mikeRomain/TheAMC > > > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > > God Bless America, Bill 0|||||||0 > > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > > "jerryg" <Greggi...@msn.com> wrote in message > > > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > > > 8.25? > > > > > Greg > > > > -- > > > Posted via a free Usenet account fromhttp://www.teranews.com > > > Its a D35 > > > Greg > > Its the same as my yj > > Greg- Hide quoted text - > > - Show quoted text - I know in my prior post I said it was not the same as my yj, but I took a closer look, and it is. D30 up front. I also own a 2006 GC limited, 4.7 litre. What axle would that have? Greg |
Re: Lockers
On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > > > > > > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > > wrote: > > > > It will be the AMC 20, but they did use Dana 44s as they were going > > > under, Like Mike Romain's here:http://----------.com/mikeRomain/TheAMC > > > 20's cover will be exactly round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > > God Bless America, Bill 0|||||||0 > > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > > "jerryg" <Greggi...@msn.com> wrote in message > > > > > I'm going to look at it now, you may be right. I don't know. Chrysler > > > > 8.25? > > > > > Greg > > > > -- > > > Posted via a free Usenet account fromhttp://www.teranews.com > > > Its a D35 > > > Greg > > Its the same as my yj > > Greg- Hide quoted text - > > - Show quoted text - I know in my prior post I said it was not the same as my yj, but I took a closer look, and it is. D30 up front. I also own a 2006 GC limited, 4.7 litre. What axle would that have? Greg |
Re: Lockers
06 GC probably has the aluminum D44, but that's just a guess. I have heard
good things about the Lockright, but nothing about the aussie locker. Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> >> > wrote: >> >> > > It will be the AMC 20, but they did use Dana 44s as they were >> > > going >> > > under, Like Mike Romain's >> > > here:http://----------.com/mikeRomain/TheAMC >> > > 20's cover will be exactly >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html >> > > God Bless America, Bill 0|||||||0 >> > > mailto:LW------...@aol.comhttp://www.----------.com/ >> >> > > "jerryg" <Greggi...@msn.com> wrote in message >> >> > > > I'm going to look at it now, you may be right. I don't know. >> > > > Chrysler >> > > > 8.25? >> >> > > > Greg >> >> > > -- >> > > Posted via a free Usenet account fromhttp://www.teranews.com >> >> > Its a D35 >> >> > Greg >> >> Its the same as my yj >> >> Greg- Hide quoted text - >> >> - Show quoted text - > > I know in my prior post I said it was not the same as my yj, but I > took a closer look, and it is. D30 up front. I also own a 2006 GC > limited, 4.7 litre. What axle would that have? > > Greg > |
Re: Lockers
06 GC probably has the aluminum D44, but that's just a guess. I have heard
good things about the Lockright, but nothing about the aussie locker. Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> >> > wrote: >> >> > > It will be the AMC 20, but they did use Dana 44s as they were >> > > going >> > > under, Like Mike Romain's >> > > here:http://----------.com/mikeRomain/TheAMC >> > > 20's cover will be exactly >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html >> > > God Bless America, Bill 0|||||||0 >> > > mailto:LW------...@aol.comhttp://www.----------.com/ >> >> > > "jerryg" <Greggi...@msn.com> wrote in message >> >> > > > I'm going to look at it now, you may be right. I don't know. >> > > > Chrysler >> > > > 8.25? >> >> > > > Greg >> >> > > -- >> > > Posted via a free Usenet account fromhttp://www.teranews.com >> >> > Its a D35 >> >> > Greg >> >> Its the same as my yj >> >> Greg- Hide quoted text - >> >> - Show quoted text - > > I know in my prior post I said it was not the same as my yj, but I > took a closer look, and it is. D30 up front. I also own a 2006 GC > limited, 4.7 litre. What axle would that have? > > Greg > |
Re: Lockers
06 GC probably has the aluminum D44, but that's just a guess. I have heard
good things about the Lockright, but nothing about the aussie locker. Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> >> >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> >> > wrote: >> >> > > It will be the AMC 20, but they did use Dana 44s as they were >> > > going >> > > under, Like Mike Romain's >> > > here:http://----------.com/mikeRomain/TheAMC >> > > 20's cover will be exactly >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html >> > > God Bless America, Bill 0|||||||0 >> > > mailto:LW------...@aol.comhttp://www.----------.com/ >> >> > > "jerryg" <Greggi...@msn.com> wrote in message >> >> > > > I'm going to look at it now, you may be right. I don't know. >> > > > Chrysler >> > > > 8.25? >> >> > > > Greg >> >> > > -- >> > > Posted via a free Usenet account fromhttp://www.teranews.com >> >> > Its a D35 >> >> > Greg >> >> Its the same as my yj >> >> Greg- Hide quoted text - >> >> - Show quoted text - > > I know in my prior post I said it was not the same as my yj, but I > took a closer look, and it is. D30 up front. I also own a 2006 GC > limited, 4.7 litre. What axle would that have? > > Greg > |
Re: Lockers
On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> 06 GC probably has the aluminum D44, but that's just a guess. I have heard > good things about the Lockright, but nothing about the aussie locker. > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... > > > > > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> > wrote: > > >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> > > going > >> > > under, Like Mike Romain's > >> > > here:http://----------.com/mikeRomain/TheAMC > >> > > 20's cover will be exactly > >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> > > God Bless America, Bill 0|||||||0 > >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> > > > I'm going to look at it now, you may be right. I don't know. > >> > > > Chrysler > >> > > > 8.25? > > >> > > > Greg > > >> > > -- > >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> > Its a D35 > > >> > Greg > > >> Its the same as my yj > > >> Greg- Hide quoted text - > > >> - Show quoted text - > > > I know in my prior post I said it was not the same as my yj, but I > > took a closer look, and it is. D30 up front. I also own a 2006 GC > > limited, 4.7 litre. What axle would that have? > > > Greg- Hide quoted text - > > - Show quoted text - I want to go as cheap as possible. It is just light off roading I do. The Aussie set up is 460.00 for both axles. Sounds good to me!! Greg |
Re: Lockers
On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> 06 GC probably has the aluminum D44, but that's just a guess. I have heard > good things about the Lockright, but nothing about the aussie locker. > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... > > > > > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> > wrote: > > >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> > > going > >> > > under, Like Mike Romain's > >> > > here:http://----------.com/mikeRomain/TheAMC > >> > > 20's cover will be exactly > >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> > > God Bless America, Bill 0|||||||0 > >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> > > > I'm going to look at it now, you may be right. I don't know. > >> > > > Chrysler > >> > > > 8.25? > > >> > > > Greg > > >> > > -- > >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> > Its a D35 > > >> > Greg > > >> Its the same as my yj > > >> Greg- Hide quoted text - > > >> - Show quoted text - > > > I know in my prior post I said it was not the same as my yj, but I > > took a closer look, and it is. D30 up front. I also own a 2006 GC > > limited, 4.7 litre. What axle would that have? > > > Greg- Hide quoted text - > > - Show quoted text - I want to go as cheap as possible. It is just light off roading I do. The Aussie set up is 460.00 for both axles. Sounds good to me!! Greg |
Re: Lockers
On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> 06 GC probably has the aluminum D44, but that's just a guess. I have heard > good things about the Lockright, but nothing about the aussie locker. > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... > > > > > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> > wrote: > > >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> > > going > >> > > under, Like Mike Romain's > >> > > here:http://----------.com/mikeRomain/TheAMC > >> > > 20's cover will be exactly > >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> > > God Bless America, Bill 0|||||||0 > >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> > > > I'm going to look at it now, you may be right. I don't know. > >> > > > Chrysler > >> > > > 8.25? > > >> > > > Greg > > >> > > -- > >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> > Its a D35 > > >> > Greg > > >> Its the same as my yj > > >> Greg- Hide quoted text - > > >> - Show quoted text - > > > I know in my prior post I said it was not the same as my yj, but I > > took a closer look, and it is. D30 up front. I also own a 2006 GC > > limited, 4.7 litre. What axle would that have? > > > Greg- Hide quoted text - > > - Show quoted text - I want to go as cheap as possible. It is just light off roading I do. The Aussie set up is 460.00 for both axles. Sounds good to me!! Greg |
Re: Lockers
Wow. Where have you found that price?
Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: >> 06 GC probably has the aluminum D44, but that's just a guess. I have >> heard >> good things about the Lockright, but nothing about the aussie locker. >> >> Carl >> >> "jerryg" <Greggi...@msn.com> wrote in message >> >> news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... >> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> >> >> > wrote: >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they were >> >> > > going >> >> > > under, Like Mike Romain's >> >> > > here:http://----------.com/mikeRomain/TheAMC >> >> > > 20's cover will be exactly >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html >> >> > > God Bless America, Bill 0|||||||0 >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message >> >> >> > > > I'm going to look at it now, you may be right. I don't know. >> >> > > > Chrysler >> >> > > > 8.25? >> >> >> > > > Greg >> >> >> > > -- >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com >> >> >> > Its a D35 >> >> >> > Greg >> >> >> Its the same as my yj >> >> >> Greg- Hide quoted text - >> >> >> - Show quoted text - >> >> > I know in my prior post I said it was not the same as my yj, but I >> > took a closer look, and it is. D30 up front. I also own a 2006 GC >> > limited, 4.7 litre. What axle would that have? >> >> > Greg- Hide quoted text - >> >> - Show quoted text - > > I want to go as cheap as possible. It is just light off roading I do. > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > Greg > |
Re: Lockers
Wow. Where have you found that price?
Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: >> 06 GC probably has the aluminum D44, but that's just a guess. I have >> heard >> good things about the Lockright, but nothing about the aussie locker. >> >> Carl >> >> "jerryg" <Greggi...@msn.com> wrote in message >> >> news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... >> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> >> >> > wrote: >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they were >> >> > > going >> >> > > under, Like Mike Romain's >> >> > > here:http://----------.com/mikeRomain/TheAMC >> >> > > 20's cover will be exactly >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html >> >> > > God Bless America, Bill 0|||||||0 >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message >> >> >> > > > I'm going to look at it now, you may be right. I don't know. >> >> > > > Chrysler >> >> > > > 8.25? >> >> >> > > > Greg >> >> >> > > -- >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com >> >> >> > Its a D35 >> >> >> > Greg >> >> >> Its the same as my yj >> >> >> Greg- Hide quoted text - >> >> >> - Show quoted text - >> >> > I know in my prior post I said it was not the same as my yj, but I >> > took a closer look, and it is. D30 up front. I also own a 2006 GC >> > limited, 4.7 litre. What axle would that have? >> >> > Greg- Hide quoted text - >> >> - Show quoted text - > > I want to go as cheap as possible. It is just light off roading I do. > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > Greg > |
Re: Lockers
Wow. Where have you found that price?
Carl "jerryg" <Gregginn7@msn.com> wrote in message news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: >> 06 GC probably has the aluminum D44, but that's just a guess. I have >> heard >> good things about the Lockright, but nothing about the aussie locker. >> >> Carl >> >> "jerryg" <Greggi...@msn.com> wrote in message >> >> news:1174447755.707755.214910@y66g2000hsf.googlegr oups.com... >> >> >> >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: >> >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> >> >> > wrote: >> >> >> > > It will be the AMC 20, but they did use Dana 44s as they were >> >> > > going >> >> > > under, Like Mike Romain's >> >> > > here:http://----------.com/mikeRomain/TheAMC >> >> > > 20's cover will be exactly >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html >> >> > > God Bless America, Bill 0|||||||0 >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ >> >> >> > > "jerryg" <Greggi...@msn.com> wrote in message >> >> >> > > > I'm going to look at it now, you may be right. I don't know. >> >> > > > Chrysler >> >> > > > 8.25? >> >> >> > > > Greg >> >> >> > > -- >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com >> >> >> > Its a D35 >> >> >> > Greg >> >> >> Its the same as my yj >> >> >> Greg- Hide quoted text - >> >> >> - Show quoted text - >> >> > I know in my prior post I said it was not the same as my yj, but I >> > took a closer look, and it is. D30 up front. I also own a 2006 GC >> > limited, 4.7 litre. What axle would that have? >> >> > Greg- Hide quoted text - >> >> - Show quoted text - > > I want to go as cheap as possible. It is just light off roading I do. > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > Greg > |
Re: Lockers
On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Wow. Where have you found that price? > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > >> heard > >> good things about the Lockright, but nothing about the aussie locker. > > >> Carl > > >> "jerryg" <Greggi...@msn.com> wrote in message > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> >> > wrote: > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> >> > > going > >> >> > > under, Like Mike Romain's > >> >> > > here:http://----------.com/mikeRomain/TheAMC > >> >> > > 20's cover will be exactly > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> >> > > God Bless America, Bill 0|||||||0 > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > >> >> > > > Chrysler > >> >> > > > 8.25? > > >> >> > > > Greg > > >> >> > > -- > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> >> > Its a D35 > > >> >> > Greg > > >> >> Its the same as my yj > > >> >> Greg- Hide quoted text - > > >> >> - Show quoted text - > > >> > I know in my prior post I said it was not the same as my yj, but I > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > >> > limited, 4.7 litre. What axle would that have? > > >> > Greg- Hide quoted text - > > >> - Show quoted text - > > > I want to go as cheap as possible. It is just light off roading I do. > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > Greg- Hide quoted text - > > - Show quoted text - Their website |
Re: Lockers
On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Wow. Where have you found that price? > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > >> heard > >> good things about the Lockright, but nothing about the aussie locker. > > >> Carl > > >> "jerryg" <Greggi...@msn.com> wrote in message > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> >> > wrote: > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> >> > > going > >> >> > > under, Like Mike Romain's > >> >> > > here:http://----------.com/mikeRomain/TheAMC > >> >> > > 20's cover will be exactly > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> >> > > God Bless America, Bill 0|||||||0 > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > >> >> > > > Chrysler > >> >> > > > 8.25? > > >> >> > > > Greg > > >> >> > > -- > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> >> > Its a D35 > > >> >> > Greg > > >> >> Its the same as my yj > > >> >> Greg- Hide quoted text - > > >> >> - Show quoted text - > > >> > I know in my prior post I said it was not the same as my yj, but I > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > >> > limited, 4.7 litre. What axle would that have? > > >> > Greg- Hide quoted text - > > >> - Show quoted text - > > > I want to go as cheap as possible. It is just light off roading I do. > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > Greg- Hide quoted text - > > - Show quoted text - Their website |
Re: Lockers
On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Wow. Where have you found that price? > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > >> heard > >> good things about the Lockright, but nothing about the aussie locker. > > >> Carl > > >> "jerryg" <Greggi...@msn.com> wrote in message > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> >> > wrote: > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> >> > > going > >> >> > > under, Like Mike Romain's > >> >> > > here:http://----------.com/mikeRomain/TheAMC > >> >> > > 20's cover will be exactly > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> >> > > God Bless America, Bill 0|||||||0 > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > >> >> > > > Chrysler > >> >> > > > 8.25? > > >> >> > > > Greg > > >> >> > > -- > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> >> > Its a D35 > > >> >> > Greg > > >> >> Its the same as my yj > > >> >> Greg- Hide quoted text - > > >> >> - Show quoted text - > > >> > I know in my prior post I said it was not the same as my yj, but I > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > >> > limited, 4.7 litre. What axle would that have? > > >> > Greg- Hide quoted text - > > >> - Show quoted text - > > > I want to go as cheap as possible. It is just light off roading I do. > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > Greg- Hide quoted text - > > - Show quoted text - Their website |
Re: Lockers
On Mar 20, 10:39 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > > > > Wow. Where have you found that price? > > > Carl > > > "jerryg" <Greggi...@msn.com> wrote in message > > >news:1174448013.220473.188660@l75g2000hse.googleg roups.com... > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > > >> heard > > >> good things about the Lockright, but nothing about the aussie locker. > > > >> Carl > > > >> "jerryg" <Greggi...@msn.com> wrote in message > > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > > >> >> > wrote: > > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > > >> >> > > going > > >> >> > > under, Like Mike Romain's > > >> >> > > here:http://----------.com/mikeRomain/TheAMC > > >> >> > > 20's cover will be exactly > > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > >> >> > > God Bless America, Bill 0|||||||0 > > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > > >> >> > > > Chrysler > > >> >> > > > 8.25? > > > >> >> > > > Greg > > > >> >> > > -- > > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > > >> >> > Its a D35 > > > >> >> > Greg > > > >> >> Its the same as my yj > > > >> >> Greg- Hide quoted text - > > > >> >> - Show quoted text - > > > >> > I know in my prior post I said it was not the same as my yj, but I > > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > > >> > limited, 4.7 litre. What axle would that have? > > > >> > Greg- Hide quoted text - > > > >> - Show quoted text - > > > > I want to go as cheap as possible. It is just light off roading I do. > > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > > Greg- Hide quoted text - > > > - Show quoted text - > > Their website- Hide quoted text - > > - Show quoted text - >From what I saw, D35 and D30, 229.99 each. Greg |
Re: Lockers
On Mar 20, 10:39 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > > > > Wow. Where have you found that price? > > > Carl > > > "jerryg" <Greggi...@msn.com> wrote in message > > >news:1174448013.220473.188660@l75g2000hse.googleg roups.com... > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > > >> heard > > >> good things about the Lockright, but nothing about the aussie locker. > > > >> Carl > > > >> "jerryg" <Greggi...@msn.com> wrote in message > > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > > >> >> > wrote: > > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > > >> >> > > going > > >> >> > > under, Like Mike Romain's > > >> >> > > here:http://----------.com/mikeRomain/TheAMC > > >> >> > > 20's cover will be exactly > > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > >> >> > > God Bless America, Bill 0|||||||0 > > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > > >> >> > > > Chrysler > > >> >> > > > 8.25? > > > >> >> > > > Greg > > > >> >> > > -- > > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > > >> >> > Its a D35 > > > >> >> > Greg > > > >> >> Its the same as my yj > > > >> >> Greg- Hide quoted text - > > > >> >> - Show quoted text - > > > >> > I know in my prior post I said it was not the same as my yj, but I > > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > > >> > limited, 4.7 litre. What axle would that have? > > > >> > Greg- Hide quoted text - > > > >> - Show quoted text - > > > > I want to go as cheap as possible. It is just light off roading I do. > > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > > Greg- Hide quoted text - > > > - Show quoted text - > > Their website- Hide quoted text - > > - Show quoted text - >From what I saw, D35 and D30, 229.99 each. Greg |
Re: Lockers
On Mar 20, 10:39 pm, "jerryg" <Greggi...@msn.com> wrote:
> On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > > > > > > Wow. Where have you found that price? > > > Carl > > > "jerryg" <Greggi...@msn.com> wrote in message > > >news:1174448013.220473.188660@l75g2000hse.googleg roups.com... > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > > >> heard > > >> good things about the Lockright, but nothing about the aussie locker. > > > >> Carl > > > >> "jerryg" <Greggi...@msn.com> wrote in message > > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > > >> >> > wrote: > > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > > >> >> > > going > > >> >> > > under, Like Mike Romain's > > >> >> > > here:http://----------.com/mikeRomain/TheAMC > > >> >> > > 20's cover will be exactly > > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > > >> >> > > God Bless America, Bill 0|||||||0 > > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > > >> >> > > > Chrysler > > >> >> > > > 8.25? > > > >> >> > > > Greg > > > >> >> > > -- > > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > > >> >> > Its a D35 > > > >> >> > Greg > > > >> >> Its the same as my yj > > > >> >> Greg- Hide quoted text - > > > >> >> - Show quoted text - > > > >> > I know in my prior post I said it was not the same as my yj, but I > > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > > >> > limited, 4.7 litre. What axle would that have? > > > >> > Greg- Hide quoted text - > > > >> - Show quoted text - > > > > I want to go as cheap as possible. It is just light off roading I do. > > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > > Greg- Hide quoted text - > > > - Show quoted text - > > Their website- Hide quoted text - > > - Show quoted text - >From what I saw, D35 and D30, 229.99 each. Greg |
Re: Lockers
On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Wow. Where have you found that price? > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > >> heard > >> good things about the Lockright, but nothing about the aussie locker. > > >> Carl > > >> "jerryg" <Greggi...@msn.com> wrote in message > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> >> > wrote: > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> >> > > going > >> >> > > under, Like Mike Romain's > >> >> > > here:http://----------.com/mikeRomain/TheAMC > >> >> > > 20's cover will be exactly > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> >> > > God Bless America, Bill 0|||||||0 > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > >> >> > > > Chrysler > >> >> > > > 8.25? > > >> >> > > > Greg > > >> >> > > -- > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> >> > Its a D35 > > >> >> > Greg > > >> >> Its the same as my yj > > >> >> Greg- Hide quoted text - > > >> >> - Show quoted text - > > >> > I know in my prior post I said it was not the same as my yj, but I > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > >> > limited, 4.7 litre. What axle would that have? > > >> > Greg- Hide quoted text - > > >> - Show quoted text - > > > I want to go as cheap as possible. It is just light off roading I do. > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > Greg- Hide quoted text - > > - Show quoted text - D35 and D30 229.00 each Greg |
Re: Lockers
On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Wow. Where have you found that price? > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > >> heard > >> good things about the Lockright, but nothing about the aussie locker. > > >> Carl > > >> "jerryg" <Greggi...@msn.com> wrote in message > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> >> > wrote: > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> >> > > going > >> >> > > under, Like Mike Romain's > >> >> > > here:http://----------.com/mikeRomain/TheAMC > >> >> > > 20's cover will be exactly > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> >> > > God Bless America, Bill 0|||||||0 > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > >> >> > > > Chrysler > >> >> > > > 8.25? > > >> >> > > > Greg > > >> >> > > -- > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> >> > Its a D35 > > >> >> > Greg > > >> >> Its the same as my yj > > >> >> Greg- Hide quoted text - > > >> >> - Show quoted text - > > >> > I know in my prior post I said it was not the same as my yj, but I > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > >> > limited, 4.7 litre. What axle would that have? > > >> > Greg- Hide quoted text - > > >> - Show quoted text - > > > I want to go as cheap as possible. It is just light off roading I do. > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > Greg- Hide quoted text - > > - Show quoted text - D35 and D30 229.00 each Greg |
Re: Lockers
On Mar 20, 10:37 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote:
> Wow. Where have you found that price? > > Carl > > "jerryg" <Greggi...@msn.com> wrote in message > > news:1174448013.220473.188660@l75g2000hse.googlegr oups.com... > > > > > On Mar 20, 10:30 pm, "Carl S" <carlsai...@REMOVE.hotmail.com> wrote: > >> 06 GC probably has the aluminum D44, but that's just a guess. I have > >> heard > >> good things about the Lockright, but nothing about the aussie locker. > > >> Carl > > >> "jerryg" <Greggi...@msn.com> wrote in message > > >>news:1174447755.707755.214910@y66g2000hsf.google groups.com... > > >> > On Mar 20, 10:26 pm, "jerryg" <Greggi...@msn.com> wrote: > >> >> On Mar 20, 10:25 pm, "jerryg" <Greggi...@msn.com> wrote: > > >> >> > On Mar 20, 11:00 pm, "L.W. \(Bill\) ------ III" <billhug...@cox.net> > >> >> > wrote: > > >> >> > > It will be the AMC 20, but they did use Dana 44s as they were > >> >> > > going > >> >> > > under, Like Mike Romain's > >> >> > > here:http://----------.com/mikeRomain/TheAMC > >> >> > > 20's cover will be exactly > >> >> > > round:http://www.crownautomotive.net/catal...leCJSJ20R.html > >> >> > > God Bless America, Bill 0|||||||0 > >> >> > > mailto:LW------...@aol.comhttp://www.----------.com/ > > >> >> > > "jerryg" <Greggi...@msn.com> wrote in message > > >> >> > > > I'm going to look at it now, you may be right. I don't know. > >> >> > > > Chrysler > >> >> > > > 8.25? > > >> >> > > > Greg > > >> >> > > -- > >> >> > > Posted via a free Usenet account fromhttp://www.teranews.com > > >> >> > Its a D35 > > >> >> > Greg > > >> >> Its the same as my yj > > >> >> Greg- Hide quoted text - > > >> >> - Show quoted text - > > >> > I know in my prior post I said it was not the same as my yj, but I > >> > took a closer look, and it is. D30 up front. I also own a 2006 GC > >> > limited, 4.7 litre. What axle would that have? > > >> > Greg- Hide quoted text - > > >> - Show quoted text - > > > I want to go as cheap as possible. It is just light off roading I do. > > The Aussie set up is 460.00 for both axles. Sounds good to me!! > > > Greg- Hide quoted text - > > - Show quoted text - D35 and D30 229.00 each Greg |
| All times are GMT -4. The time now is 08:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands