Don't expect the same finish with the roll-on stuff as you get with the
professionally applied spray on liners. I have Line-X in my pickup bed
and like it, the only thing is the texture tends to hold in dirt, so
expect that. It's not that it doesn't wash off, but it's there between
washes. It's very durable. Rhino Liner can be applied with a UV
protectant (extra cost) so it won't fade.

travis wrote:

> I'd like to be able to put some kind of good liner on the inside of my
> Jeep (if I ever get one) and was wondering what you guys have used
> with good success before. A local shop here says for $475 they'll
> Line-x the floor/interior/cargo area of a CJ5 if I bring it in with
> basically only the driver's seat in place. Anything out there that's
> comparable to Line-x and Rhino-liner that you can apply at home with a
> brush? I'd rather be able to do it myself instead of paying someone
> else. If not, is there a general consensus on which is better between
> Line-x and Rhino Liner? Thanks.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

 

Don't expect the same finish with the roll-on stuff as you get with the
professionally applied spray on liners. I have Line-X in my pickup bed
and like it, the only thing is the texture tends to hold in dirt, so
expect that. It's not that it doesn't wash off, but it's there between
washes. It's very durable. Rhino Liner can be applied with a UV
protectant (extra cost) so it won't fade.

travis wrote:

> I'd like to be able to put some kind of good liner on the inside of my
> Jeep (if I ever get one) and was wondering what you guys have used
> with good success before. A local shop here says for $475 they'll
> Line-x the floor/interior/cargo area of a CJ5 if I bring it in with
> basically only the driver's seat in place. Anything out there that's
> comparable to Line-x and Rhino-liner that you can apply at home with a
> brush? I'd rather be able to do it myself instead of paying someone
> else. If not, is there a general consensus on which is better between
> Line-x and Rhino Liner? Thanks.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

 

Don't expect the same finish with the roll-on stuff as you get with the
professionally applied spray on liners. I have Line-X in my pickup bed
and like it, the only thing is the texture tends to hold in dirt, so
expect that. It's not that it doesn't wash off, but it's there between
washes. It's very durable. Rhino Liner can be applied with a UV
protectant (extra cost) so it won't fade.

travis wrote:

> I'd like to be able to put some kind of good liner on the inside of my
> Jeep (if I ever get one) and was wondering what you guys have used
> with good success before. A local shop here says for $475 they'll
> Line-x the floor/interior/cargo area of a CJ5 if I bring it in with
> basically only the driver's seat in place. Anything out there that's
> comparable to Line-x and Rhino-liner that you can apply at home with a
> brush? I'd rather be able to do it myself instead of paying someone
> else. If not, is there a general consensus on which is better between
> Line-x and Rhino Liner? Thanks.
>
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!

--
__________________________________________________ _________
tw
03 TJ Rubicon
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

http://www.7slotgrille.com/jeepers/t...ron/index.html
(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

 

In article <02stov4j4leaqpojq58f0092sv3v7igemk@4ax.com>, travis
<travist34removethis@hotmail.com> writes:

>'d like to be able to put some kind of good liner on the inside of my
>Jeep (if I ever get one) and was wondering what you guys have used
>with good success before. A local shop here says for $475 they'll
>Line-x the floor/interior/cargo area of a CJ5 if I bring it in with
>basically only the driver's seat in place. Anything out there that's
>comparable to Line-x and Rhino-liner that you can apply at home with a
>brush? I'd rather be able to do it myself instead of paying someone
>else. If not, is there a general consensus on which is better between
>Line-x and Rhino Liner? Thanks.

I have Line-X in the bed of my Superduty and I would not recommend it for the
tub of a Jeep. Its a great product but it has a somewhat abrasive surface with
a lot of "bite" to it, and in a passenger compartment you may not want the
stuff close to your skin unless you want to deeply exfoliate.

My TJ has a sprayed-in product called Reflex which is similar to Rhino, it's a
much more rubbery product. A local truck accessories shop sprayed it in and did
a good job.

I chose to have mine done as opposed to doing it myself just from a time
standpoint. There's a LOT of time involved in prep work, and even a mediocre
product will hold up as long as the surface was prepped right. The tech who did
my TJ said it took about 3 hours to prep and 20 minutes to apply, and I had
removed everything from the inside except the driver's seat.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html

 

In article <02stov4j4leaqpojq58f0092sv3v7igemk@4ax.com>, travis
<travist34removethis@hotmail.com> writes:

>'d like to be able to put some kind of good liner on the inside of my
>Jeep (if I ever get one) and was wondering what you guys have used
>with good success before. A local shop here says for $475 they'll
>Line-x the floor/interior/cargo area of a CJ5 if I bring it in with
>basically only the driver's seat in place. Anything out there that's
>comparable to Line-x and Rhino-liner that you can apply at home with a
>brush? I'd rather be able to do it myself instead of paying someone
>else. If not, is there a general consensus on which is better between
>Line-x and Rhino Liner? Thanks.

I have Line-X in the bed of my Superduty and I would not recommend it for the
tub of a Jeep. Its a great product but it has a somewhat abrasive surface with
a lot of "bite" to it, and in a passenger compartment you may not want the
stuff close to your skin unless you want to deeply exfoliate.

My TJ has a sprayed-in product called Reflex which is similar to Rhino, it's a
much more rubbery product. A local truck accessories shop sprayed it in and did
a good job.

I chose to have mine done as opposed to doing it myself just from a time
standpoint. There's a LOT of time involved in prep work, and even a mediocre
product will hold up as long as the surface was prepped right. The tech who did
my TJ said it took about 3 hours to prep and 20 minutes to apply, and I had
removed everything from the inside except the driver's seat.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html

 

In article <02stov4j4leaqpojq58f0092sv3v7igemk@4ax.com>, travis
<travist34removethis@hotmail.com> writes:

>'d like to be able to put some kind of good liner on the inside of my
>Jeep (if I ever get one) and was wondering what you guys have used
>with good success before. A local shop here says for $475 they'll
>Line-x the floor/interior/cargo area of a CJ5 if I bring it in with
>basically only the driver's seat in place. Anything out there that's
>comparable to Line-x and Rhino-liner that you can apply at home with a
>brush? I'd rather be able to do it myself instead of paying someone
>else. If not, is there a general consensus on which is better between
>Line-x and Rhino Liner? Thanks.

I have Line-X in the bed of my Superduty and I would not recommend it for the
tub of a Jeep. Its a great product but it has a somewhat abrasive surface with
a lot of "bite" to it, and in a passenger compartment you may not want the
stuff close to your skin unless you want to deeply exfoliate.

My TJ has a sprayed-in product called Reflex which is similar to Rhino, it's a
much more rubbery product. A local truck accessories shop sprayed it in and did
a good job.

I chose to have mine done as opposed to doing it myself just from a time
standpoint. There's a LOT of time involved in prep work, and even a mediocre
product will hold up as long as the surface was prepped right. The tech who did
my TJ said it took about 3 hours to prep and 20 minutes to apply, and I had
removed everything from the inside except the driver's seat.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html

 

On Thu, 16 Oct 2003 20:09:51 GMT, "JimG" <jimg@cj7.com> shared the
following:

>Hi Travis,
>
>I used Duplicolor, available from Wally Word. I think I used two gallons
>(it's about $50 a gallon). My application is not as thick as thick as Rino
>or Line-X could be, but one fourth the cost. Put it on with a brush and
>texture it (and put some more on) with a special roller.
>
>http://www.duplicolor.com/products/truckbed.html

Hmm. What does it feel like? Kinda like a thin rubber mat that's
tightly glued to the floor? Rubbery feeling? Or is it hard? Like
really solid?


--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!

 

On Thu, 16 Oct 2003 20:09:51 GMT, "JimG" <jimg@cj7.com> shared the
following:

>Hi Travis,
>
>I used Duplicolor, available from Wally Word. I think I used two gallons
>(it's about $50 a gallon). My application is not as thick as thick as Rino
>or Line-X could be, but one fourth the cost. Put it on with a brush and
>texture it (and put some more on) with a special roller.
>
>http://www.duplicolor.com/products/truckbed.html

Hmm. What does it feel like? Kinda like a thin rubber mat that's
tightly glued to the floor? Rubbery feeling? Or is it hard? Like
really solid?


--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!

 

On Thu, 16 Oct 2003 20:09:51 GMT, "JimG" <jimg@cj7.com> shared the
following:

>Hi Travis,
>
>I used Duplicolor, available from Wally Word. I think I used two gallons
>(it's about $50 a gallon). My application is not as thick as thick as Rino
>or Line-X could be, but one fourth the cost. Put it on with a brush and
>texture it (and put some more on) with a special roller.
>
>http://www.duplicolor.com/products/truckbed.html

Hmm. What does it feel like? Kinda like a thin rubber mat that's
tightly glued to the floor? Rubbery feeling? Or is it hard? Like
really solid?


--
Travis
http://jeepadventures.dyndns.org/jeep.html
The meek shall inherit the earth. After I'm finished with it.
:wq!

 

Like twaldron says below it's not the same finish as Line-X or Rino... with
the thickness that I have, it's more like textured paint. If you applied it
thicker, I would say it would be more like rubber, but then you start to
approach the cost of the Line-X. Mine looks good, is very durable, and it's
easy to clean... I'm happy with it for the price. If price was no object,
and I had no rust, I would get the Line-X.

JimG

>
> Hmm. What does it feel like? Kinda like a thin rubber mat that's
> tightly glued to the floor? Rubbery feeling? Or is it hard? Like
> really solid?
>
>
> --
> Travis
> http://jeepadventures.dyndns.org/jeep.html
> The meek shall inherit the earth. After I'm finished with it.
> :wq!