"Lights on" chime not working (97 TJ - doors ON)
05-26-2005, 04:15 PM
#121
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
LOL
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
05-26-2005, 05:16 PM
#122
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
LOL! I hear you, he was lucky....
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
05-26-2005, 05:16 PM
#123
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
LOL! I hear you, he was lucky....
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
05-26-2005, 05:16 PM
#124
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
LOL! I hear you, he was lucky....
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
05-26-2005, 05:16 PM
#125
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
LOL! I hear you, he was lucky....
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
There should be a bent clip on the back of the brass fitting that can be
bent back out to grab again.
Mike
Jeff Strickland wrote:
>
> What are the odds that the cold wire would be pushed out of the fuse block?
>
> You can be sure that if it was MY fuse block, the hot lead would have been
> pushed out, and set the whole mess on fire.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4295CCFF.5BB2E7E2@sympatico.ca...
> > Wow, good one. Thanks for the follow-up!
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > HG97TJ wrote:
> > >
> > > That was it Jeff. I pulled the fuse box out and saw that one of the
> > > wires for the #4 fuse was not plugged in all the way in preventing
> > > contact to the fuse. Pushed it in and it all works again. I'm
> > > guessing that repeated removal and replacement of the fuse by the
> > > previous owner caused the wire to get pushed out of the slot. Thanks
> > > for the suggestion.
> > >
> > > Howie
05-27-2005, 01:22 PM
#126
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42963CAB.DB2D8A86@sympatico.ca...
> LOL! I hear you, he was lucky....
>
> There should be a bent clip on the back of the brass fitting that can be
> bent back out to grab again.
>
Not if there was a fire first ...
I suspect the PO had used his DMM to locate the hot lead to the fuse block
for this particular fuse, and forcibly pushed the other lead out the back,
then put the fuse back in. In this case, yes he should find a tab to bend
around to lock the lead in place.
05-27-2005, 01:22 PM
#127
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42963CAB.DB2D8A86@sympatico.ca...
> LOL! I hear you, he was lucky....
>
> There should be a bent clip on the back of the brass fitting that can be
> bent back out to grab again.
>
Not if there was a fire first ...
I suspect the PO had used his DMM to locate the hot lead to the fuse block
for this particular fuse, and forcibly pushed the other lead out the back,
then put the fuse back in. In this case, yes he should find a tab to bend
around to lock the lead in place.
05-27-2005, 01:22 PM
#128
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42963CAB.DB2D8A86@sympatico.ca...
> LOL! I hear you, he was lucky....
>
> There should be a bent clip on the back of the brass fitting that can be
> bent back out to grab again.
>
Not if there was a fire first ...
I suspect the PO had used his DMM to locate the hot lead to the fuse block
for this particular fuse, and forcibly pushed the other lead out the back,
then put the fuse back in. In this case, yes he should find a tab to bend
around to lock the lead in place.
05-27-2005, 01:22 PM
#129
Guest
Posts: n/a
Re: "Lights on" chime not working (97 TJ - doors ON)
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:42963CAB.DB2D8A86@sympatico.ca...
> LOL! I hear you, he was lucky....
>
> There should be a bent clip on the back of the brass fitting that can be
> bent back out to grab again.
>
Not if there was a fire first ...
I suspect the PO had used his DMM to locate the hot lead to the fuse block
for this particular fuse, and forcibly pushed the other lead out the back,
then put the fuse back in. In this case, yes he should find a tab to bend
around to lock the lead in place.
Thread
Thread Starter
Forum
Replies
Last Post
ssharad@gmail.com
Jeep Mailing List
6
01-02-2007 10:55 AM
Shabby
Jeep Mailing List
36
11-10-2004 09:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
