Lifting (floor jack) points on my Jeeps
03-14-2007, 11:25 PM
#11
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
I always jack under the pumpkin. Whats wrong with that?
Carl
"DougW" <post.replies@invalid.address> wrote in message
news:Yo2Kh.7180$Ng1.3872@newsfe19.lga...
> jerryg wrote:
>> Good evening.
>>
>> I bought a floor jack tonight, planning on taking the tires off my 86
>> Cherokee and swapping them with the tires from my 95 Wrangler. Where
>> are the best places to place the jack on each vehicle? Frame? Axles? I
>> bought jack stands as well to support then during the change. I need
>> advice on the safest location for the actual lifting on both vehicles.
>> Don't want to damage either of them ;-)
>
> Just don't jack under the diff.
>
> Frame lift points are the best but sometimes the jack simply
> isn't tall enough. I generally put the jack under the axle
> U bolts or fairly close. Haven't tweaked anything yet.
>
>
> --
> DougW
>
Carl
"DougW" <post.replies@invalid.address> wrote in message
news:Yo2Kh.7180$Ng1.3872@newsfe19.lga...
> jerryg wrote:
>> Good evening.
>>
>> I bought a floor jack tonight, planning on taking the tires off my 86
>> Cherokee and swapping them with the tires from my 95 Wrangler. Where
>> are the best places to place the jack on each vehicle? Frame? Axles? I
>> bought jack stands as well to support then during the change. I need
>> advice on the safest location for the actual lifting on both vehicles.
>> Don't want to damage either of them ;-)
>
> Just don't jack under the diff.
>
> Frame lift points are the best but sometimes the jack simply
> isn't tall enough. I generally put the jack under the axle
> U bolts or fairly close. Haven't tweaked anything yet.
>
>
> --
> DougW
>
03-14-2007, 11:25 PM
#12
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
I always jack under the pumpkin. Whats wrong with that?
Carl
"DougW" <post.replies@invalid.address> wrote in message
news:Yo2Kh.7180$Ng1.3872@newsfe19.lga...
> jerryg wrote:
>> Good evening.
>>
>> I bought a floor jack tonight, planning on taking the tires off my 86
>> Cherokee and swapping them with the tires from my 95 Wrangler. Where
>> are the best places to place the jack on each vehicle? Frame? Axles? I
>> bought jack stands as well to support then during the change. I need
>> advice on the safest location for the actual lifting on both vehicles.
>> Don't want to damage either of them ;-)
>
> Just don't jack under the diff.
>
> Frame lift points are the best but sometimes the jack simply
> isn't tall enough. I generally put the jack under the axle
> U bolts or fairly close. Haven't tweaked anything yet.
>
>
> --
> DougW
>
Carl
"DougW" <post.replies@invalid.address> wrote in message
news:Yo2Kh.7180$Ng1.3872@newsfe19.lga...
> jerryg wrote:
>> Good evening.
>>
>> I bought a floor jack tonight, planning on taking the tires off my 86
>> Cherokee and swapping them with the tires from my 95 Wrangler. Where
>> are the best places to place the jack on each vehicle? Frame? Axles? I
>> bought jack stands as well to support then during the change. I need
>> advice on the safest location for the actual lifting on both vehicles.
>> Don't want to damage either of them ;-)
>
> Just don't jack under the diff.
>
> Frame lift points are the best but sometimes the jack simply
> isn't tall enough. I generally put the jack under the axle
> U bolts or fairly close. Haven't tweaked anything yet.
>
>
> --
> DougW
>
03-14-2007, 11:25 PM
#13
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
I always jack under the pumpkin. Whats wrong with that?
Carl
"DougW" <post.replies@invalid.address> wrote in message
news:Yo2Kh.7180$Ng1.3872@newsfe19.lga...
> jerryg wrote:
>> Good evening.
>>
>> I bought a floor jack tonight, planning on taking the tires off my 86
>> Cherokee and swapping them with the tires from my 95 Wrangler. Where
>> are the best places to place the jack on each vehicle? Frame? Axles? I
>> bought jack stands as well to support then during the change. I need
>> advice on the safest location for the actual lifting on both vehicles.
>> Don't want to damage either of them ;-)
>
> Just don't jack under the diff.
>
> Frame lift points are the best but sometimes the jack simply
> isn't tall enough. I generally put the jack under the axle
> U bolts or fairly close. Haven't tweaked anything yet.
>
>
> --
> DougW
>
Carl
"DougW" <post.replies@invalid.address> wrote in message
news:Yo2Kh.7180$Ng1.3872@newsfe19.lga...
> jerryg wrote:
>> Good evening.
>>
>> I bought a floor jack tonight, planning on taking the tires off my 86
>> Cherokee and swapping them with the tires from my 95 Wrangler. Where
>> are the best places to place the jack on each vehicle? Frame? Axles? I
>> bought jack stands as well to support then during the change. I need
>> advice on the safest location for the actual lifting on both vehicles.
>> Don't want to damage either of them ;-)
>
> Just don't jack under the diff.
>
> Frame lift points are the best but sometimes the jack simply
> isn't tall enough. I generally put the jack under the axle
> U bolts or fairly close. Haven't tweaked anything yet.
>
>
> --
> DougW
>
03-15-2007, 12:28 AM
#14
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
86 Cherokee doesn't have the fake D44. Other than with the aluminum housed
D44, what's the problem with lifting at the pumpkin? Not trying to sound
like a jackass, just want to make sure I haven't been doing this wrong for
years.
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45f8b356$0$16361$88260bb3@free.teranews.com.. .
> Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
> take out the bearing, first time, every time.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
>> I always jack under the pumpkin. Whats wrong with that?
>>
>> Carl
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
D44, what's the problem with lifting at the pumpkin? Not trying to sound
like a jackass, just want to make sure I haven't been doing this wrong for
years.
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45f8b356$0$16361$88260bb3@free.teranews.com.. .
> Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
> take out the bearing, first time, every time.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
>> I always jack under the pumpkin. Whats wrong with that?
>>
>> Carl
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-15-2007, 12:28 AM
#15
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
86 Cherokee doesn't have the fake D44. Other than with the aluminum housed
D44, what's the problem with lifting at the pumpkin? Not trying to sound
like a jackass, just want to make sure I haven't been doing this wrong for
years.
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45f8b356$0$16361$88260bb3@free.teranews.com.. .
> Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
> take out the bearing, first time, every time.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
>> I always jack under the pumpkin. Whats wrong with that?
>>
>> Carl
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
D44, what's the problem with lifting at the pumpkin? Not trying to sound
like a jackass, just want to make sure I haven't been doing this wrong for
years.
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45f8b356$0$16361$88260bb3@free.teranews.com.. .
> Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
> take out the bearing, first time, every time.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
>> I always jack under the pumpkin. Whats wrong with that?
>>
>> Carl
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-15-2007, 12:28 AM
#16
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
86 Cherokee doesn't have the fake D44. Other than with the aluminum housed
D44, what's the problem with lifting at the pumpkin? Not trying to sound
like a jackass, just want to make sure I haven't been doing this wrong for
years.
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45f8b356$0$16361$88260bb3@free.teranews.com.. .
> Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
> take out the bearing, first time, every time.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
>> I always jack under the pumpkin. Whats wrong with that?
>>
>> Carl
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
D44, what's the problem with lifting at the pumpkin? Not trying to sound
like a jackass, just want to make sure I haven't been doing this wrong for
years.
Carl
"L.W. (Bill) ------ III" <----------@***.net> wrote in message
news:45f8b356$0$16361$88260bb3@free.teranews.com.. .
> Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
> take out the bearing, first time, every time.
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
> news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
>> I always jack under the pumpkin. Whats wrong with that?
>>
>> Carl
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>
03-15-2007, 12:37 AM
#17
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
take out the bearing, first time, every time.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
> I always jack under the pumpkin. Whats wrong with that?
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
take out the bearing, first time, every time.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
> I always jack under the pumpkin. Whats wrong with that?
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
03-15-2007, 12:37 AM
#18
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
take out the bearing, first time, every time.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
> I always jack under the pumpkin. Whats wrong with that?
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
take out the bearing, first time, every time.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
> I always jack under the pumpkin. Whats wrong with that?
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
03-15-2007, 12:37 AM
#19
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
Grand Cherokees with the fake Dana 44 (aluminum housing) will bend and
take out the bearing, first time, every time.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
> I always jack under the pumpkin. Whats wrong with that?
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
take out the bearing, first time, every time.
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:xvOdnWGUMNlfIWXYnZ2dnUVZ_uygnZ2d@comcast.com. ..
> I always jack under the pumpkin. Whats wrong with that?
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
03-15-2007, 01:47 AM
#20
Guest
Posts: n/a
Re: Lifting (floor jack) points on my Jeeps
I've lift thousands of rear ends by the pumpkin in my twenty years as a
Chevron Dealer: http://www.----------.com/chevron.jpg But that was back in
the days when cars where powered by V8s via nine inch or twelve bolts. Now,
I'm not going take the chance, we know we can't stand on the hood, anymore
to pick fruit nor paint the house, in their attempt lighten the weight for
better mileage.
God Bless America, Bill 0|||||||0
mailto:--------------------
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:OPadnd2Q8a4IVmXYnZ2dnUVZ_hWdnZ2d@comcast.com. ..
> 86 Cherokee doesn't have the fake D44. Other than with the aluminum housed
> D44, what's the problem with lifting at the pumpkin? Not trying to sound
> like a jackass, just want to make sure I haven't been doing this wrong for
> years.
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
Chevron Dealer: http://www.----------.com/chevron.jpg But that was back in
the days when cars where powered by V8s via nine inch or twelve bolts. Now,
I'm not going take the chance, we know we can't stand on the hood, anymore
to pick fruit nor paint the house, in their attempt lighten the weight for
better mileage.
God Bless America, Bill 0|||||||0
mailto:--------------------
"Carl S" <carlsaiyed@REMOVE.hotmail.com> wrote in message
news:OPadnd2Q8a4IVmXYnZ2dnUVZ_hWdnZ2d@comcast.com. ..
> 86 Cherokee doesn't have the fake D44. Other than with the aluminum housed
> D44, what's the problem with lifting at the pumpkin? Not trying to sound
> like a jackass, just want to make sure I haven't been doing this wrong for
> years.
>
> Carl
--
Posted via a free Usenet account from http://www.teranews.com
