lift size for tires...
10-07-2005, 07:39 PM
#41
Guest
Posts: n/a
Re: lift size for tires...
A picture is worth a thousand words:
http://www.----------.com/93-YJ-2.jpg
I'm still waiting for your four wheel drive picture, Wannabee.
God Bless America, Bill O|||||||O
mailto:--------------------
RoyJ wrote:
>
> Same old story froom Bill. That got disproved on the last round of this
> topic.
http://www.----------.com/93-YJ-2.jpg
I'm still waiting for your four wheel drive picture, Wannabee.
God Bless America, Bill O|||||||O
mailto:--------------------
RoyJ wrote:
>
> Same old story froom Bill. That got disproved on the last round of this
> topic.
10-07-2005, 07:39 PM
#42
Guest
Posts: n/a
Re: lift size for tires...
A picture is worth a thousand words:
http://www.----------.com/93-YJ-2.jpg
I'm still waiting for your four wheel drive picture, Wannabee.
God Bless America, Bill O|||||||O
mailto:--------------------
RoyJ wrote:
>
> Same old story froom Bill. That got disproved on the last round of this
> topic.
http://www.----------.com/93-YJ-2.jpg
I'm still waiting for your four wheel drive picture, Wannabee.
God Bless America, Bill O|||||||O
mailto:--------------------
RoyJ wrote:
>
> Same old story froom Bill. That got disproved on the last round of this
> topic.
10-07-2005, 07:39 PM
#43
Guest
Posts: n/a
Re: lift size for tires...
A picture is worth a thousand words:
http://www.----------.com/93-YJ-2.jpg
I'm still waiting for your four wheel drive picture, Wannabee.
God Bless America, Bill O|||||||O
mailto:--------------------
RoyJ wrote:
>
> Same old story froom Bill. That got disproved on the last round of this
> topic.
http://www.----------.com/93-YJ-2.jpg
I'm still waiting for your four wheel drive picture, Wannabee.
God Bless America, Bill O|||||||O
mailto:--------------------
RoyJ wrote:
>
> Same old story froom Bill. That got disproved on the last round of this
> topic.
10-08-2005, 06:45 PM
#44
Guest
Posts: n/a
Re: lift size for tires...
In article <43466EA2.5EB4327D@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
>I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>YJ shackles. When I change my frame, I am dumping the longer shackles,
>they cause me to eat a lot of u-joints over the years because they throw
>the driveshaft geometry off a bit and I am not interested in dicking
>around with shims to try and set it back stock.
How about replacing the shackles with a 1" body lift kit. I wouldn't go
more than 1".
>Steve G wrote:
>>
>> Whats the general concensus for amount of lift on a CJ for 33" tires?
--
Jeeps and dubs and everything's nice...
Mike Romain <romainm@sympatico.ca> wrote:
>I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>YJ shackles. When I change my frame, I am dumping the longer shackles,
>they cause me to eat a lot of u-joints over the years because they throw
>the driveshaft geometry off a bit and I am not interested in dicking
>around with shims to try and set it back stock.
How about replacing the shackles with a 1" body lift kit. I wouldn't go
more than 1".
>Steve G wrote:
>>
>> Whats the general concensus for amount of lift on a CJ for 33" tires?
--
Jeeps and dubs and everything's nice...
10-08-2005, 06:45 PM
#45
Guest
Posts: n/a
Re: lift size for tires...
In article <43466EA2.5EB4327D@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
>I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>YJ shackles. When I change my frame, I am dumping the longer shackles,
>they cause me to eat a lot of u-joints over the years because they throw
>the driveshaft geometry off a bit and I am not interested in dicking
>around with shims to try and set it back stock.
How about replacing the shackles with a 1" body lift kit. I wouldn't go
more than 1".
>Steve G wrote:
>>
>> Whats the general concensus for amount of lift on a CJ for 33" tires?
--
Jeeps and dubs and everything's nice...
Mike Romain <romainm@sympatico.ca> wrote:
>I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>YJ shackles. When I change my frame, I am dumping the longer shackles,
>they cause me to eat a lot of u-joints over the years because they throw
>the driveshaft geometry off a bit and I am not interested in dicking
>around with shims to try and set it back stock.
How about replacing the shackles with a 1" body lift kit. I wouldn't go
more than 1".
>Steve G wrote:
>>
>> Whats the general concensus for amount of lift on a CJ for 33" tires?
--
Jeeps and dubs and everything's nice...
10-08-2005, 06:45 PM
#46
Guest
Posts: n/a
Re: lift size for tires...
In article <43466EA2.5EB4327D@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
>I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>YJ shackles. When I change my frame, I am dumping the longer shackles,
>they cause me to eat a lot of u-joints over the years because they throw
>the driveshaft geometry off a bit and I am not interested in dicking
>around with shims to try and set it back stock.
How about replacing the shackles with a 1" body lift kit. I wouldn't go
more than 1".
>Steve G wrote:
>>
>> Whats the general concensus for amount of lift on a CJ for 33" tires?
--
Jeeps and dubs and everything's nice...
Mike Romain <romainm@sympatico.ca> wrote:
>I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>YJ shackles. When I change my frame, I am dumping the longer shackles,
>they cause me to eat a lot of u-joints over the years because they throw
>the driveshaft geometry off a bit and I am not interested in dicking
>around with shims to try and set it back stock.
How about replacing the shackles with a 1" body lift kit. I wouldn't go
more than 1".
>Steve G wrote:
>>
>> Whats the general concensus for amount of lift on a CJ for 33" tires?
--
Jeeps and dubs and everything's nice...
10-08-2005, 06:55 PM
#47
Guest
Posts: n/a
Re: lift size for tires...
That is an option lots of folks do. Not for mine though, I already have
a 'glass tub and it sits higher than stock anyway. I am thinking on
taller engine mounts and leaving the YJ length shackles to even things
up.
Also on a CJ the odds are 'not' good on getting those body mount bolts
out. Only one came out for me when I did it, the rest snapped or spun
and had to be cut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Peter Parker wrote:
>
> In article <43466EA2.5EB4327D@sympatico.ca>,
> Mike Romain <romainm@sympatico.ca> wrote:
> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
> >YJ shackles. When I change my frame, I am dumping the longer shackles,
> >they cause me to eat a lot of u-joints over the years because they throw
> >the driveshaft geometry off a bit and I am not interested in dicking
> >around with shims to try and set it back stock.
>
> How about replacing the shackles with a 1" body lift kit. I wouldn't go
> more than 1".
>
> >Steve G wrote:
> >>
> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>
> --
> Jeeps and dubs and everything's nice...
a 'glass tub and it sits higher than stock anyway. I am thinking on
taller engine mounts and leaving the YJ length shackles to even things
up.
Also on a CJ the odds are 'not' good on getting those body mount bolts
out. Only one came out for me when I did it, the rest snapped or spun
and had to be cut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Peter Parker wrote:
>
> In article <43466EA2.5EB4327D@sympatico.ca>,
> Mike Romain <romainm@sympatico.ca> wrote:
> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
> >YJ shackles. When I change my frame, I am dumping the longer shackles,
> >they cause me to eat a lot of u-joints over the years because they throw
> >the driveshaft geometry off a bit and I am not interested in dicking
> >around with shims to try and set it back stock.
>
> How about replacing the shackles with a 1" body lift kit. I wouldn't go
> more than 1".
>
> >Steve G wrote:
> >>
> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>
> --
> Jeeps and dubs and everything's nice...
10-08-2005, 06:55 PM
#48
Guest
Posts: n/a
Re: lift size for tires...
That is an option lots of folks do. Not for mine though, I already have
a 'glass tub and it sits higher than stock anyway. I am thinking on
taller engine mounts and leaving the YJ length shackles to even things
up.
Also on a CJ the odds are 'not' good on getting those body mount bolts
out. Only one came out for me when I did it, the rest snapped or spun
and had to be cut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Peter Parker wrote:
>
> In article <43466EA2.5EB4327D@sympatico.ca>,
> Mike Romain <romainm@sympatico.ca> wrote:
> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
> >YJ shackles. When I change my frame, I am dumping the longer shackles,
> >they cause me to eat a lot of u-joints over the years because they throw
> >the driveshaft geometry off a bit and I am not interested in dicking
> >around with shims to try and set it back stock.
>
> How about replacing the shackles with a 1" body lift kit. I wouldn't go
> more than 1".
>
> >Steve G wrote:
> >>
> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>
> --
> Jeeps and dubs and everything's nice...
a 'glass tub and it sits higher than stock anyway. I am thinking on
taller engine mounts and leaving the YJ length shackles to even things
up.
Also on a CJ the odds are 'not' good on getting those body mount bolts
out. Only one came out for me when I did it, the rest snapped or spun
and had to be cut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Peter Parker wrote:
>
> In article <43466EA2.5EB4327D@sympatico.ca>,
> Mike Romain <romainm@sympatico.ca> wrote:
> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
> >YJ shackles. When I change my frame, I am dumping the longer shackles,
> >they cause me to eat a lot of u-joints over the years because they throw
> >the driveshaft geometry off a bit and I am not interested in dicking
> >around with shims to try and set it back stock.
>
> How about replacing the shackles with a 1" body lift kit. I wouldn't go
> more than 1".
>
> >Steve G wrote:
> >>
> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>
> --
> Jeeps and dubs and everything's nice...
10-08-2005, 06:55 PM
#49
Guest
Posts: n/a
Re: lift size for tires...
That is an option lots of folks do. Not for mine though, I already have
a 'glass tub and it sits higher than stock anyway. I am thinking on
taller engine mounts and leaving the YJ length shackles to even things
up.
Also on a CJ the odds are 'not' good on getting those body mount bolts
out. Only one came out for me when I did it, the rest snapped or spun
and had to be cut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Peter Parker wrote:
>
> In article <43466EA2.5EB4327D@sympatico.ca>,
> Mike Romain <romainm@sympatico.ca> wrote:
> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
> >YJ shackles. When I change my frame, I am dumping the longer shackles,
> >they cause me to eat a lot of u-joints over the years because they throw
> >the driveshaft geometry off a bit and I am not interested in dicking
> >around with shims to try and set it back stock.
>
> How about replacing the shackles with a 1" body lift kit. I wouldn't go
> more than 1".
>
> >Steve G wrote:
> >>
> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>
> --
> Jeeps and dubs and everything's nice...
a 'glass tub and it sits higher than stock anyway. I am thinking on
taller engine mounts and leaving the YJ length shackles to even things
up.
Also on a CJ the odds are 'not' good on getting those body mount bolts
out. Only one came out for me when I did it, the rest snapped or spun
and had to be cut.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Peter Parker wrote:
>
> In article <43466EA2.5EB4327D@sympatico.ca>,
> Mike Romain <romainm@sympatico.ca> wrote:
> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
> >YJ shackles. When I change my frame, I am dumping the longer shackles,
> >they cause me to eat a lot of u-joints over the years because they throw
> >the driveshaft geometry off a bit and I am not interested in dicking
> >around with shims to try and set it back stock.
>
> How about replacing the shackles with a 1" body lift kit. I wouldn't go
> more than 1".
>
> >Steve G wrote:
> >>
> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>
> --
> Jeeps and dubs and everything's nice...
10-08-2005, 07:01 PM
#50
Guest
Posts: n/a
Re: lift size for tires...
In article <43484E7D.2ADFE378@sympatico.ca>,
Mike Romain <romainm@sympatico.ca> wrote:
>That is an option lots of folks do. Not for mine though, I already have
>a 'glass tub and it sits higher than stock anyway. I am thinking on
>taller engine mounts and leaving the YJ length shackles to even things
>up.
I forgot about it being glass. Taller engine mounts is good. What about
lowering the transfer case?
>
>Also on a CJ the odds are 'not' good on getting those body mount bolts
>out. Only one came out for me when I did it, the rest snapped or spun
>and had to be cut.
I think that is with all the rust zoned vehicles. You get new hardware
with the body lift kits?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Peter Parker wrote:
>>
>> In article <43466EA2.5EB4327D@sympatico.ca>,
>> Mike Romain <romainm@sympatico.ca> wrote:
>> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>> >YJ shackles. When I change my frame, I am dumping the longer shackles,
>> >they cause me to eat a lot of u-joints over the years because they throw
>> >the driveshaft geometry off a bit and I am not interested in dicking
>> >around with shims to try and set it back stock.
>>
>> How about replacing the shackles with a 1" body lift kit. I wouldn't go
>> more than 1".
>>
>> >Steve G wrote:
>> >>
>> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>>
>> --
>> Jeeps and dubs and everything's nice...
--
Jeeps and dubs and everything's nice...
Mike Romain <romainm@sympatico.ca> wrote:
>That is an option lots of folks do. Not for mine though, I already have
>a 'glass tub and it sits higher than stock anyway. I am thinking on
>taller engine mounts and leaving the YJ length shackles to even things
>up.
I forgot about it being glass. Taller engine mounts is good. What about
lowering the transfer case?
>
>Also on a CJ the odds are 'not' good on getting those body mount bolts
>out. Only one came out for me when I did it, the rest snapped or spun
>and had to be cut.
I think that is with all the rust zoned vehicles. You get new hardware
with the body lift kits?
>
>Mike
>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>88 Cherokee 235 BFG AT's
>
>Peter Parker wrote:
>>
>> In article <43466EA2.5EB4327D@sympatico.ca>,
>> Mike Romain <romainm@sympatico.ca> wrote:
>> >I have tons of clearance with a 2.5" spring lift and a 1/2" extra from
>> >YJ shackles. When I change my frame, I am dumping the longer shackles,
>> >they cause me to eat a lot of u-joints over the years because they throw
>> >the driveshaft geometry off a bit and I am not interested in dicking
>> >around with shims to try and set it back stock.
>>
>> How about replacing the shackles with a 1" body lift kit. I wouldn't go
>> more than 1".
>>
>> >Steve G wrote:
>> >>
>> >> Whats the general concensus for amount of lift on a CJ for 33" tires?
>>
>> --
>> Jeeps and dubs and everything's nice...
--
Jeeps and dubs and everything's nice...
