LF : TROUBLE CODE + ABS LIGHT PROBLEM...
10-04-2004, 08:03 PM
#1
Guest
Posts: n/a
LF : TROUBLE CODE + ABS LIGHT PROBLEM...
I have the ABS lights comming on since i have replace the 4 struts and the
front u joint. The air filter and oil been replace as well. The vehicule is
ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
I have code 12 and code 55
thank you
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
le-clone@bellnet.ca
www.leclone.com
front u joint. The air filter and oil been replace as well. The vehicule is
ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
I have code 12 and code 55
thank you
--
--
LE CLONE
279 Notre-Dame
Gatineau, Qc
J8P 1K6
(819) 643-0511
le-clone@bellnet.ca
www.leclone.com
10-04-2004, 08:45 PM
#2
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
Le CLone did pass the time by typing:
> I have the ABS lights comming on since i have replace the 4 struts and the
> front u joint. The air filter and oil been replace as well. The vehicule is
> ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
>
>
> I have code 12 and code 55
First off, ABS doesn't set any codes you can get from the CE light.
12 and 55 are normal.
Double check the ABS sensor connections on the front end.
Odds are one is disconnected or has been knocked out of spec.
Make, model, year would help too.
--
DougW
> I have the ABS lights comming on since i have replace the 4 struts and the
> front u joint. The air filter and oil been replace as well. The vehicule is
> ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
>
>
> I have code 12 and code 55
First off, ABS doesn't set any codes you can get from the CE light.
12 and 55 are normal.
Double check the ABS sensor connections on the front end.
Odds are one is disconnected or has been knocked out of spec.
Make, model, year would help too.
--
DougW
10-04-2004, 08:45 PM
#3
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
Le CLone did pass the time by typing:
> I have the ABS lights comming on since i have replace the 4 struts and the
> front u joint. The air filter and oil been replace as well. The vehicule is
> ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
>
>
> I have code 12 and code 55
First off, ABS doesn't set any codes you can get from the CE light.
12 and 55 are normal.
Double check the ABS sensor connections on the front end.
Odds are one is disconnected or has been knocked out of spec.
Make, model, year would help too.
--
DougW
> I have the ABS lights comming on since i have replace the 4 struts and the
> front u joint. The air filter and oil been replace as well. The vehicule is
> ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
>
>
> I have code 12 and code 55
First off, ABS doesn't set any codes you can get from the CE light.
12 and 55 are normal.
Double check the ABS sensor connections on the front end.
Odds are one is disconnected or has been knocked out of spec.
Make, model, year would help too.
--
DougW
10-04-2004, 08:45 PM
#4
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
Le CLone did pass the time by typing:
> I have the ABS lights comming on since i have replace the 4 struts and the
> front u joint. The air filter and oil been replace as well. The vehicule is
> ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
>
>
> I have code 12 and code 55
First off, ABS doesn't set any codes you can get from the CE light.
12 and 55 are normal.
Double check the ABS sensor connections on the front end.
Odds are one is disconnected or has been knocked out of spec.
Make, model, year would help too.
--
DougW
> I have the ABS lights comming on since i have replace the 4 struts and the
> front u joint. The air filter and oil been replace as well. The vehicule is
> ok until i reach about 3-4 Mph then the ABS get crazy and the light come on.
>
>
> I have code 12 and code 55
First off, ABS doesn't set any codes you can get from the CE light.
12 and 55 are normal.
Double check the ABS sensor connections on the front end.
Odds are one is disconnected or has been knocked out of spec.
Make, model, year would help too.
--
DougW
10-05-2004, 10:13 AM
#5
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
It's a 96 Grand Cherokee 4.0 L
"DougW" <post.replies@invalid.address> wrote in message
news:%8m8d.3962$gk.3945@okepread01...
> Le CLone did pass the time by typing:
> > I have the ABS lights comming on since i have replace the 4 struts and
the
> > front u joint. The air filter and oil been replace as well. The vehicule
is
> > ok until i reach about 3-4 Mph then the ABS get crazy and the light come
on.
> >
> >
> > I have code 12 and code 55
>
> First off, ABS doesn't set any codes you can get from the CE light.
> 12 and 55 are normal.
>
> Double check the ABS sensor connections on the front end.
> Odds are one is disconnected or has been knocked out of spec.
>
> Make, model, year would help too.
>
> --
> DougW
>
>
>
"DougW" <post.replies@invalid.address> wrote in message
news:%8m8d.3962$gk.3945@okepread01...
> Le CLone did pass the time by typing:
> > I have the ABS lights comming on since i have replace the 4 struts and
the
> > front u joint. The air filter and oil been replace as well. The vehicule
is
> > ok until i reach about 3-4 Mph then the ABS get crazy and the light come
on.
> >
> >
> > I have code 12 and code 55
>
> First off, ABS doesn't set any codes you can get from the CE light.
> 12 and 55 are normal.
>
> Double check the ABS sensor connections on the front end.
> Odds are one is disconnected or has been knocked out of spec.
>
> Make, model, year would help too.
>
> --
> DougW
>
>
>
10-05-2004, 10:13 AM
#6
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
It's a 96 Grand Cherokee 4.0 L
"DougW" <post.replies@invalid.address> wrote in message
news:%8m8d.3962$gk.3945@okepread01...
> Le CLone did pass the time by typing:
> > I have the ABS lights comming on since i have replace the 4 struts and
the
> > front u joint. The air filter and oil been replace as well. The vehicule
is
> > ok until i reach about 3-4 Mph then the ABS get crazy and the light come
on.
> >
> >
> > I have code 12 and code 55
>
> First off, ABS doesn't set any codes you can get from the CE light.
> 12 and 55 are normal.
>
> Double check the ABS sensor connections on the front end.
> Odds are one is disconnected or has been knocked out of spec.
>
> Make, model, year would help too.
>
> --
> DougW
>
>
>
"DougW" <post.replies@invalid.address> wrote in message
news:%8m8d.3962$gk.3945@okepread01...
> Le CLone did pass the time by typing:
> > I have the ABS lights comming on since i have replace the 4 struts and
the
> > front u joint. The air filter and oil been replace as well. The vehicule
is
> > ok until i reach about 3-4 Mph then the ABS get crazy and the light come
on.
> >
> >
> > I have code 12 and code 55
>
> First off, ABS doesn't set any codes you can get from the CE light.
> 12 and 55 are normal.
>
> Double check the ABS sensor connections on the front end.
> Odds are one is disconnected or has been knocked out of spec.
>
> Make, model, year would help too.
>
> --
> DougW
>
>
>
10-05-2004, 10:13 AM
#7
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
It's a 96 Grand Cherokee 4.0 L
"DougW" <post.replies@invalid.address> wrote in message
news:%8m8d.3962$gk.3945@okepread01...
> Le CLone did pass the time by typing:
> > I have the ABS lights comming on since i have replace the 4 struts and
the
> > front u joint. The air filter and oil been replace as well. The vehicule
is
> > ok until i reach about 3-4 Mph then the ABS get crazy and the light come
on.
> >
> >
> > I have code 12 and code 55
>
> First off, ABS doesn't set any codes you can get from the CE light.
> 12 and 55 are normal.
>
> Double check the ABS sensor connections on the front end.
> Odds are one is disconnected or has been knocked out of spec.
>
> Make, model, year would help too.
>
> --
> DougW
>
>
>
"DougW" <post.replies@invalid.address> wrote in message
news:%8m8d.3962$gk.3945@okepread01...
> Le CLone did pass the time by typing:
> > I have the ABS lights comming on since i have replace the 4 struts and
the
> > front u joint. The air filter and oil been replace as well. The vehicule
is
> > ok until i reach about 3-4 Mph then the ABS get crazy and the light come
on.
> >
> >
> > I have code 12 and code 55
>
> First off, ABS doesn't set any codes you can get from the CE light.
> 12 and 55 are normal.
>
> Double check the ABS sensor connections on the front end.
> Odds are one is disconnected or has been knocked out of spec.
>
> Make, model, year would help too.
>
> --
> DougW
>
>
>
10-05-2004, 10:54 AM
#8
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
My mechanic already dissambled the front sensors and clean them up.
the problem did not exist before, Could it be something in the rear brake ?
is it ABS on the 4 wheels ? What do you mean by saying out of specs ??
Also my front rotors had shield protector that where totally rusted and been
removed could it have something to do ?
Thank you
"Le CLone" <Le-clone@bellnet.ca> wrote in message
news:6_x8d.42$Am6.1970@news20.bellglobal.com...
> It's a 96 Grand Cherokee 4.0 L
>
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:%8m8d.3962$gk.3945@okepread01...
> > Le CLone did pass the time by typing:
> > > I have the ABS lights comming on since i have replace the 4 struts and
> the
> > > front u joint. The air filter and oil been replace as well. The
vehicule
> is
> > > ok until i reach about 3-4 Mph then the ABS get crazy and the light
come
> on.
> > >
> > >
> > > I have code 12 and code 55
> >
> > First off, ABS doesn't set any codes you can get from the CE light.
> > 12 and 55 are normal.
> >
> > Double check the ABS sensor connections on the front end.
> > Odds are one is disconnected or has been knocked out of spec.
> >
> > Make, model, year would help too.
> >
> > --
> > DougW
> >
> >
> >
>
>
the problem did not exist before, Could it be something in the rear brake ?
is it ABS on the 4 wheels ? What do you mean by saying out of specs ??
Also my front rotors had shield protector that where totally rusted and been
removed could it have something to do ?
Thank you
"Le CLone" <Le-clone@bellnet.ca> wrote in message
news:6_x8d.42$Am6.1970@news20.bellglobal.com...
> It's a 96 Grand Cherokee 4.0 L
>
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:%8m8d.3962$gk.3945@okepread01...
> > Le CLone did pass the time by typing:
> > > I have the ABS lights comming on since i have replace the 4 struts and
> the
> > > front u joint. The air filter and oil been replace as well. The
vehicule
> is
> > > ok until i reach about 3-4 Mph then the ABS get crazy and the light
come
> on.
> > >
> > >
> > > I have code 12 and code 55
> >
> > First off, ABS doesn't set any codes you can get from the CE light.
> > 12 and 55 are normal.
> >
> > Double check the ABS sensor connections on the front end.
> > Odds are one is disconnected or has been knocked out of spec.
> >
> > Make, model, year would help too.
> >
> > --
> > DougW
> >
> >
> >
>
>
10-05-2004, 10:54 AM
#9
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
My mechanic already dissambled the front sensors and clean them up.
the problem did not exist before, Could it be something in the rear brake ?
is it ABS on the 4 wheels ? What do you mean by saying out of specs ??
Also my front rotors had shield protector that where totally rusted and been
removed could it have something to do ?
Thank you
"Le CLone" <Le-clone@bellnet.ca> wrote in message
news:6_x8d.42$Am6.1970@news20.bellglobal.com...
> It's a 96 Grand Cherokee 4.0 L
>
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:%8m8d.3962$gk.3945@okepread01...
> > Le CLone did pass the time by typing:
> > > I have the ABS lights comming on since i have replace the 4 struts and
> the
> > > front u joint. The air filter and oil been replace as well. The
vehicule
> is
> > > ok until i reach about 3-4 Mph then the ABS get crazy and the light
come
> on.
> > >
> > >
> > > I have code 12 and code 55
> >
> > First off, ABS doesn't set any codes you can get from the CE light.
> > 12 and 55 are normal.
> >
> > Double check the ABS sensor connections on the front end.
> > Odds are one is disconnected or has been knocked out of spec.
> >
> > Make, model, year would help too.
> >
> > --
> > DougW
> >
> >
> >
>
>
the problem did not exist before, Could it be something in the rear brake ?
is it ABS on the 4 wheels ? What do you mean by saying out of specs ??
Also my front rotors had shield protector that where totally rusted and been
removed could it have something to do ?
Thank you
"Le CLone" <Le-clone@bellnet.ca> wrote in message
news:6_x8d.42$Am6.1970@news20.bellglobal.com...
> It's a 96 Grand Cherokee 4.0 L
>
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:%8m8d.3962$gk.3945@okepread01...
> > Le CLone did pass the time by typing:
> > > I have the ABS lights comming on since i have replace the 4 struts and
> the
> > > front u joint. The air filter and oil been replace as well. The
vehicule
> is
> > > ok until i reach about 3-4 Mph then the ABS get crazy and the light
come
> on.
> > >
> > >
> > > I have code 12 and code 55
> >
> > First off, ABS doesn't set any codes you can get from the CE light.
> > 12 and 55 are normal.
> >
> > Double check the ABS sensor connections on the front end.
> > Odds are one is disconnected or has been knocked out of spec.
> >
> > Make, model, year would help too.
> >
> > --
> > DougW
> >
> >
> >
>
>
10-05-2004, 10:54 AM
#10
Guest
Posts: n/a
Re: TROUBLE CODE + ABS LIGHT PROBLEM...
My mechanic already dissambled the front sensors and clean them up.
the problem did not exist before, Could it be something in the rear brake ?
is it ABS on the 4 wheels ? What do you mean by saying out of specs ??
Also my front rotors had shield protector that where totally rusted and been
removed could it have something to do ?
Thank you
"Le CLone" <Le-clone@bellnet.ca> wrote in message
news:6_x8d.42$Am6.1970@news20.bellglobal.com...
> It's a 96 Grand Cherokee 4.0 L
>
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:%8m8d.3962$gk.3945@okepread01...
> > Le CLone did pass the time by typing:
> > > I have the ABS lights comming on since i have replace the 4 struts and
> the
> > > front u joint. The air filter and oil been replace as well. The
vehicule
> is
> > > ok until i reach about 3-4 Mph then the ABS get crazy and the light
come
> on.
> > >
> > >
> > > I have code 12 and code 55
> >
> > First off, ABS doesn't set any codes you can get from the CE light.
> > 12 and 55 are normal.
> >
> > Double check the ABS sensor connections on the front end.
> > Odds are one is disconnected or has been knocked out of spec.
> >
> > Make, model, year would help too.
> >
> > --
> > DougW
> >
> >
> >
>
>
the problem did not exist before, Could it be something in the rear brake ?
is it ABS on the 4 wheels ? What do you mean by saying out of specs ??
Also my front rotors had shield protector that where totally rusted and been
removed could it have something to do ?
Thank you
"Le CLone" <Le-clone@bellnet.ca> wrote in message
news:6_x8d.42$Am6.1970@news20.bellglobal.com...
> It's a 96 Grand Cherokee 4.0 L
>
>
>
> "DougW" <post.replies@invalid.address> wrote in message
> news:%8m8d.3962$gk.3945@okepread01...
> > Le CLone did pass the time by typing:
> > > I have the ABS lights comming on since i have replace the 4 struts and
> the
> > > front u joint. The air filter and oil been replace as well. The
vehicule
> is
> > > ok until i reach about 3-4 Mph then the ABS get crazy and the light
come
> on.
> > >
> > >
> > > I have code 12 and code 55
> >
> > First off, ABS doesn't set any codes you can get from the CE light.
> > 12 and 55 are normal.
> >
> > Double check the ABS sensor connections on the front end.
> > Odds are one is disconnected or has been knocked out of spec.
> >
> > Make, model, year would help too.
> >
> > --
> > DougW
> >
> >
> >
>
>
