Leaking clutch line
02-09-2007, 04:43 PM
#11
Guest
Posts: n/a
Re: Leaking clutch line
Teflon tape works well on the threads of flare fittings. It is a
lubricant that allows the fitting to tighten easily which compresses the
flare nicely. I use it all the time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> If I had a nickel for every flare joint I have taken apart, that had teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
lubricant that allows the fitting to tighten easily which compresses the
flare nicely. I use it all the time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> If I had a nickel for every flare joint I have taken apart, that had teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
02-09-2007, 04:43 PM
#12
Guest
Posts: n/a
Re: Leaking clutch line
Teflon tape works well on the threads of flare fittings. It is a
lubricant that allows the fitting to tighten easily which compresses the
flare nicely. I use it all the time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> If I had a nickel for every flare joint I have taken apart, that had teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
lubricant that allows the fitting to tighten easily which compresses the
flare nicely. I use it all the time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> If I had a nickel for every flare joint I have taken apart, that had teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
02-09-2007, 04:43 PM
#13
Guest
Posts: n/a
Re: Leaking clutch line
Teflon tape works well on the threads of flare fittings. It is a
lubricant that allows the fitting to tighten easily which compresses the
flare nicely. I use it all the time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> If I had a nickel for every flare joint I have taken apart, that had teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
lubricant that allows the fitting to tighten easily which compresses the
flare nicely. I use it all the time.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Earle Horton wrote:
> If I had a nickel for every flare joint I have taken apart, that had teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
02-09-2007, 04:45 PM
#14
Guest
Posts: n/a
Re: Leaking clutch line
If I had a nickel for every flare joint I have taken apart, that had teflon
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
02-09-2007, 04:45 PM
#15
Guest
Posts: n/a
Re: Leaking clutch line
If I had a nickel for every flare joint I have taken apart, that had teflon
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
02-09-2007, 04:45 PM
#16
Guest
Posts: n/a
Re: Leaking clutch line
If I had a nickel for every flare joint I have taken apart, that had teflon
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
02-09-2007, 04:45 PM
#17
Guest
Posts: n/a
Re: Leaking clutch line
If I had a nickel for every flare joint I have taken apart, that had teflon
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
tape on the threads...
Earle
<carnuck@hotmail.com> wrote in message
news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
> Teflon tape won't work because it's the flare on the line that does
> the sealing against the inverted flare at the bottom. Try tightening
> the line more, but back it off 1/4 turn first.
>
02-10-2007, 09:45 AM
#18
Guest
Posts: n/a
Re: Leaking clutch line
A neighbor of my son-in-law used Teflon tape on all the compression fittings
in his newly remodeled bathroom.
I helped him with his next project which was replacing his kitchen ceiling.
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:Utidna2d7NsYdVHYnZ2dnUVZ_ragnZ2d@comcast.com. ..
> If I had a nickel for every flare joint I have taken apart, that had
> teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
in his newly remodeled bathroom.
I helped him with his next project which was replacing his kitchen ceiling.
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:Utidna2d7NsYdVHYnZ2dnUVZ_ragnZ2d@comcast.com. ..
> If I had a nickel for every flare joint I have taken apart, that had
> teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
02-10-2007, 09:45 AM
#19
Guest
Posts: n/a
Re: Leaking clutch line
A neighbor of my son-in-law used Teflon tape on all the compression fittings
in his newly remodeled bathroom.
I helped him with his next project which was replacing his kitchen ceiling.
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:Utidna2d7NsYdVHYnZ2dnUVZ_ragnZ2d@comcast.com. ..
> If I had a nickel for every flare joint I have taken apart, that had
> teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
in his newly remodeled bathroom.
I helped him with his next project which was replacing his kitchen ceiling.
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:Utidna2d7NsYdVHYnZ2dnUVZ_ragnZ2d@comcast.com. ..
> If I had a nickel for every flare joint I have taken apart, that had
> teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
02-10-2007, 09:45 AM
#20
Guest
Posts: n/a
Re: Leaking clutch line
A neighbor of my son-in-law used Teflon tape on all the compression fittings
in his newly remodeled bathroom.
I helped him with his next project which was replacing his kitchen ceiling.
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:Utidna2d7NsYdVHYnZ2dnUVZ_ragnZ2d@comcast.com. ..
> If I had a nickel for every flare joint I have taken apart, that had
> teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
in his newly remodeled bathroom.
I helped him with his next project which was replacing his kitchen ceiling.
"Earle Horton" <apodo@gracioso.usa> wrote in message
news:Utidna2d7NsYdVHYnZ2dnUVZ_ragnZ2d@comcast.com. ..
> If I had a nickel for every flare joint I have taken apart, that had
> teflon
> tape on the threads...
>
> Earle
>
> <carnuck@hotmail.com> wrote in message
> news:1171048940.681001.309780@v45g2000cwv.googlegr oups.com...
>> Teflon tape won't work because it's the flare on the line that does
>> the sealing against the inverted flare at the bottom. Try tightening
>> the line more, but back it off 1/4 turn first.
>>
>
>
