Leaf spring centering pins
#14
Guest
Posts: n/a
Re: Leaf spring centering pins
Ufatbastehd:
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
#15
Guest
Posts: n/a
Re: Leaf spring centering pins
Ufatbastehd:
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
#16
Guest
Posts: n/a
Re: Leaf spring centering pins
Ufatbastehd:
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
#17
Guest
Posts: n/a
Re: Leaf spring centering pins
Ufatbastehd:
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
Rubicon Express should have sent a set of center pins with the new springs.
If not, give them a call. They sell 5/16" and 3/8" sets that are longer
than needed and you cut off the excess after the install:
http://www.rubiconexpress.com/dynami...p?folderid=229
Or you might be able to find them at a local suspension shop.
Terry
92YJ
RE1455s front & rear
"ufatbastehd" <ufatbasted@yahoo.com> wrote in message
news:1140490197.044866.20620@g44g2000cwa.googlegro ups.com...
> WHen I did my 2.5 RE lift on my YJ I added shims to the rear. The shims
> had holes in them.
> When you add shims do you need to use longer leaf centering pins so the
> pins go through the shim and into the spring plate?
>
> I going higher soon and want to insure I install the new springs and
> shims correctly.
>
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
Jeep JK Forum
2
03-21-2013 09:41 AM
William Oliveri
Jeep Mailing List
27
01-17-2004 01:36 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)