The sway bar discos that came with the lift kit on my XJ are too tall - They
bottom out on the fenderwell. I re-installed the stock links, but I would
still like to have removeable links. The sway bar connects to the axle by
the bottom of the link. The bottom of the link rides on a bolt that passes
thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
remove/re-install with two wrenches.

What I want to do its buy a new bolt of the same size, but longer. Without
threads would be ideal. Drill a hole in the center of the bolt, and insert a
locking pin that came with my Skyjacker sway bar discos. This would allow me
to pull the pin, and slide the bolt out, thus allowing for a budget easy
sway bar disco without the need for wrenches.

I'm concerned about the amount of lateral stress put on the bolt. The
bracket on the axle cradles the bottom of the sway bar end link and looks
like it holds all the lateral movement, while the bushing/bolt combination
manages the vertical and fore/aft load.

Does anyone know how much lateral stress is put on the bottom bolt? I don't
want one pin breaking off and leaving me with half an anti sway system. Am I
crazy?

Thanks,

Carl

 

Not my auction, purchase at your own risk.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

-Brian

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:426498f3_1@newsfeed.slurp.net...
> The sway bar discos that came with the lift kit on my XJ are too tall -
> They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert
> a
> locking pin that came with my Skyjacker sway bar discos. This would allow
> me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I
> don't
> want one pin breaking off and leaving me with half an anti sway system. Am
> I
> crazy?
>
> Thanks,
>
> Carl
>
>
>
>

 

Not my auction, purchase at your own risk.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

-Brian

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:426498f3_1@newsfeed.slurp.net...
> The sway bar discos that came with the lift kit on my XJ are too tall -
> They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert
> a
> locking pin that came with my Skyjacker sway bar discos. This would allow
> me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I
> don't
> want one pin breaking off and leaving me with half an anti sway system. Am
> I
> crazy?
>
> Thanks,
>
> Carl
>
>
>
>

 

Not my auction, purchase at your own risk.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

-Brian

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:426498f3_1@newsfeed.slurp.net...
> The sway bar discos that came with the lift kit on my XJ are too tall -
> They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert
> a
> locking pin that came with my Skyjacker sway bar discos. This would allow
> me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I
> don't
> want one pin breaking off and leaving me with half an anti sway system. Am
> I
> crazy?
>
> Thanks,
>
> Carl
>
>
>
>

 

Not my auction, purchase at your own risk.
http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

-Brian

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:426498f3_1@newsfeed.slurp.net...
> The sway bar discos that came with the lift kit on my XJ are too tall -
> They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert
> a
> locking pin that came with my Skyjacker sway bar discos. This would allow
> me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I
> don't
> want one pin breaking off and leaving me with half an anti sway system. Am
> I
> crazy?
>
> Thanks,
>
> Carl
>
>
>
>

 

Hi Carl,

You won't need much of a pin to hold your link - very little lateral
stress. You should, however, ensure that your swaybar arms are within 5
degrees of OEM specs when the vehicle is at rest on a level surface:

http://www.jksmfg.com/images/swaybar...20XJ_proof.jpg

Using OEM links with a lift may pull your swaybar arms too low. If the
links you got with your Skyjacker kit are wrong, why not return them and
exchange for some that fit?

Steve
http://xjeep.dyndns.org


Carl Saiyed wrote:
> The sway bar discos that came with the lift kit on my XJ are too tall - They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert a
> locking pin that came with my Skyjacker sway bar discos. This would allow me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I don't
> want one pin breaking off and leaving me with half an anti sway system. Am I
> crazy?
>
> Thanks,
>
> Carl

 

Hi Carl,

You won't need much of a pin to hold your link - very little lateral
stress. You should, however, ensure that your swaybar arms are within 5
degrees of OEM specs when the vehicle is at rest on a level surface:

http://www.jksmfg.com/images/swaybar...20XJ_proof.jpg

Using OEM links with a lift may pull your swaybar arms too low. If the
links you got with your Skyjacker kit are wrong, why not return them and
exchange for some that fit?

Steve
http://xjeep.dyndns.org


Carl Saiyed wrote:
> The sway bar discos that came with the lift kit on my XJ are too tall - They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert a
> locking pin that came with my Skyjacker sway bar discos. This would allow me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I don't
> want one pin breaking off and leaving me with half an anti sway system. Am I
> crazy?
>
> Thanks,
>
> Carl

 

Hi Carl,

You won't need much of a pin to hold your link - very little lateral
stress. You should, however, ensure that your swaybar arms are within 5
degrees of OEM specs when the vehicle is at rest on a level surface:

http://www.jksmfg.com/images/swaybar...20XJ_proof.jpg

Using OEM links with a lift may pull your swaybar arms too low. If the
links you got with your Skyjacker kit are wrong, why not return them and
exchange for some that fit?

Steve
http://xjeep.dyndns.org


Carl Saiyed wrote:
> The sway bar discos that came with the lift kit on my XJ are too tall - They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert a
> locking pin that came with my Skyjacker sway bar discos. This would allow me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I don't
> want one pin breaking off and leaving me with half an anti sway system. Am I
> crazy?
>
> Thanks,
>
> Carl

 

Hi Carl,

You won't need much of a pin to hold your link - very little lateral
stress. You should, however, ensure that your swaybar arms are within 5
degrees of OEM specs when the vehicle is at rest on a level surface:

http://www.jksmfg.com/images/swaybar...20XJ_proof.jpg

Using OEM links with a lift may pull your swaybar arms too low. If the
links you got with your Skyjacker kit are wrong, why not return them and
exchange for some that fit?

Steve
http://xjeep.dyndns.org


Carl Saiyed wrote:
> The sway bar discos that came with the lift kit on my XJ are too tall - They
> bottom out on the fenderwell. I re-installed the stock links, but I would
> still like to have removeable links. The sway bar connects to the axle by
> the bottom of the link. The bottom of the link rides on a bolt that passes
> thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
> remove/re-install with two wrenches.
>
> What I want to do its buy a new bolt of the same size, but longer. Without
> threads would be ideal. Drill a hole in the center of the bolt, and insert a
> locking pin that came with my Skyjacker sway bar discos. This would allow me
> to pull the pin, and slide the bolt out, thus allowing for a budget easy
> sway bar disco without the need for wrenches.
>
> I'm concerned about the amount of lateral stress put on the bolt. The
> bracket on the axle cradles the bottom of the sway bar end link and looks
> like it holds all the lateral movement, while the bushing/bolt combination
> manages the vertical and fore/aft load.
>
> Does anyone know how much lateral stress is put on the bottom bolt? I don't
> want one pin breaking off and leaving me with half an anti sway system. Am I
> crazy?
>
> Thanks,
>
> Carl

 

Sheesh! www.mcmaster.com has those pins for $.85 each in packs of 10. Or
go to any hardware store with the displays of specialty hardware.

Cherokee-Ltd wrote:

> Not my auction, purchase at your own risk.
> http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW
>
> -Brian
>
> "Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
> news:426498f3_1@newsfeed.slurp.net...
>
>>The sway bar discos that came with the lift kit on my XJ are too tall -
>>They
>>bottom out on the fenderwell. I re-installed the stock links, but I would
>>still like to have removeable links. The sway bar connects to the axle by
>>the bottom of the link. The bottom of the link rides on a bolt that passes
>>thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to
>>remove/re-install with two wrenches.
>>
>>What I want to do its buy a new bolt of the same size, but longer. Without
>>threads would be ideal. Drill a hole in the center of the bolt, and insert
>>a
>>locking pin that came with my Skyjacker sway bar discos. This would allow
>>me
>>to pull the pin, and slide the bolt out, thus allowing for a budget easy
>>sway bar disco without the need for wrenches.
>>
>>I'm concerned about the amount of lateral stress put on the bolt. The
>>bracket on the axle cradles the bottom of the sway bar end link and looks
>>like it holds all the lateral movement, while the bushing/bolt combination
>>manages the vertical and fore/aft load.
>>
>>Does anyone know how much lateral stress is put on the bottom bolt? I
>>don't
>>want one pin breaking off and leaving me with half an anti sway system. Am
>>I
>>crazy?
>>
>>Thanks,
>>
>>Carl
>>
>>
>>
>>
>
>
>