Just got my 4" lift kit
Guest
Posts: n/a
Re: Just got my 4" lift kit
Sounds like he has mixed up YJ and CJ springs.
CJ springs are 2". YJ springs are 2.5".
They are 'not' interchangeable without a lot of metal fabbing and
changing perches, shackles, etc...
They also have a totally different flex rate and should not be mixed
together. The Jeep will be all over the road with mixed up springs.
You also have to have shackles on both springs or the springs will go
ridged and not flex. When they springs flex, they get longer and
shorter so a shackle is needed for this movement.
Front springs have front shackles, rear springs have rear shackles.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> springs are narrower than the rear. I called the guy I bought it from and
> he couldn't give a reason for the difference other than that the stock
> perches are made for those widths (front spring width is 2", rear spring
> width is 2.5").
>
> I was thinking that the front holds then engine and therefore "should" be
> heavier and so I was wondering why the front spring width on a CJ7 is 2"
> where the back springs are 2.5"?
>
> Also, on my current setup it looks like stock springs which some type of
> shackle on the front (can't remember on the back). When I install these
> springs and shocks should the shackle remain there or should there be no
> shackle what so ever (looking for quality here)?
>
> Thanks,
>
> Bill
CJ springs are 2". YJ springs are 2.5".
They are 'not' interchangeable without a lot of metal fabbing and
changing perches, shackles, etc...
They also have a totally different flex rate and should not be mixed
together. The Jeep will be all over the road with mixed up springs.
You also have to have shackles on both springs or the springs will go
ridged and not flex. When they springs flex, they get longer and
shorter so a shackle is needed for this movement.
Front springs have front shackles, rear springs have rear shackles.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> springs are narrower than the rear. I called the guy I bought it from and
> he couldn't give a reason for the difference other than that the stock
> perches are made for those widths (front spring width is 2", rear spring
> width is 2.5").
>
> I was thinking that the front holds then engine and therefore "should" be
> heavier and so I was wondering why the front spring width on a CJ7 is 2"
> where the back springs are 2.5"?
>
> Also, on my current setup it looks like stock springs which some type of
> shackle on the front (can't remember on the back). When I install these
> springs and shocks should the shackle remain there or should there be no
> shackle what so ever (looking for quality here)?
>
> Thanks,
>
> Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
Sounds like he has mixed up YJ and CJ springs.
CJ springs are 2". YJ springs are 2.5".
They are 'not' interchangeable without a lot of metal fabbing and
changing perches, shackles, etc...
They also have a totally different flex rate and should not be mixed
together. The Jeep will be all over the road with mixed up springs.
You also have to have shackles on both springs or the springs will go
ridged and not flex. When they springs flex, they get longer and
shorter so a shackle is needed for this movement.
Front springs have front shackles, rear springs have rear shackles.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> springs are narrower than the rear. I called the guy I bought it from and
> he couldn't give a reason for the difference other than that the stock
> perches are made for those widths (front spring width is 2", rear spring
> width is 2.5").
>
> I was thinking that the front holds then engine and therefore "should" be
> heavier and so I was wondering why the front spring width on a CJ7 is 2"
> where the back springs are 2.5"?
>
> Also, on my current setup it looks like stock springs which some type of
> shackle on the front (can't remember on the back). When I install these
> springs and shocks should the shackle remain there or should there be no
> shackle what so ever (looking for quality here)?
>
> Thanks,
>
> Bill
CJ springs are 2". YJ springs are 2.5".
They are 'not' interchangeable without a lot of metal fabbing and
changing perches, shackles, etc...
They also have a totally different flex rate and should not be mixed
together. The Jeep will be all over the road with mixed up springs.
You also have to have shackles on both springs or the springs will go
ridged and not flex. When they springs flex, they get longer and
shorter so a shackle is needed for this movement.
Front springs have front shackles, rear springs have rear shackles.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> springs are narrower than the rear. I called the guy I bought it from and
> he couldn't give a reason for the difference other than that the stock
> perches are made for those widths (front spring width is 2", rear spring
> width is 2.5").
>
> I was thinking that the front holds then engine and therefore "should" be
> heavier and so I was wondering why the front spring width on a CJ7 is 2"
> where the back springs are 2.5"?
>
> Also, on my current setup it looks like stock springs which some type of
> shackle on the front (can't remember on the back). When I install these
> springs and shocks should the shackle remain there or should there be no
> shackle what so ever (looking for quality here)?
>
> Thanks,
>
> Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
Sounds like he has mixed up YJ and CJ springs.
CJ springs are 2". YJ springs are 2.5".
They are 'not' interchangeable without a lot of metal fabbing and
changing perches, shackles, etc...
They also have a totally different flex rate and should not be mixed
together. The Jeep will be all over the road with mixed up springs.
You also have to have shackles on both springs or the springs will go
ridged and not flex. When they springs flex, they get longer and
shorter so a shackle is needed for this movement.
Front springs have front shackles, rear springs have rear shackles.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> springs are narrower than the rear. I called the guy I bought it from and
> he couldn't give a reason for the difference other than that the stock
> perches are made for those widths (front spring width is 2", rear spring
> width is 2.5").
>
> I was thinking that the front holds then engine and therefore "should" be
> heavier and so I was wondering why the front spring width on a CJ7 is 2"
> where the back springs are 2.5"?
>
> Also, on my current setup it looks like stock springs which some type of
> shackle on the front (can't remember on the back). When I install these
> springs and shocks should the shackle remain there or should there be no
> shackle what so ever (looking for quality here)?
>
> Thanks,
>
> Bill
CJ springs are 2". YJ springs are 2.5".
They are 'not' interchangeable without a lot of metal fabbing and
changing perches, shackles, etc...
They also have a totally different flex rate and should not be mixed
together. The Jeep will be all over the road with mixed up springs.
You also have to have shackles on both springs or the springs will go
ridged and not flex. When they springs flex, they get longer and
shorter so a shackle is needed for this movement.
Front springs have front shackles, rear springs have rear shackles.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> springs are narrower than the rear. I called the guy I bought it from and
> he couldn't give a reason for the difference other than that the stock
> perches are made for those widths (front spring width is 2", rear spring
> width is 2.5").
>
> I was thinking that the front holds then engine and therefore "should" be
> heavier and so I was wondering why the front spring width on a CJ7 is 2"
> where the back springs are 2.5"?
>
> Also, on my current setup it looks like stock springs which some type of
> shackle on the front (can't remember on the back). When I install these
> springs and shocks should the shackle remain there or should there be no
> shackle what so ever (looking for quality here)?
>
> Thanks,
>
> Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
My '81 CJ has two different size springs, it is a safe assumption that
William's '83 also has two different size springs. The real test is to hold
the new springs up to the existing springs and see if they match.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40055377.1BE0855E@sympatico.ca...
> Sounds like he has mixed up YJ and CJ springs.
>
> CJ springs are 2". YJ springs are 2.5".
>
> They are 'not' interchangeable without a lot of metal fabbing and
> changing perches, shackles, etc...
>
> They also have a totally different flex rate and should not be mixed
> together. The Jeep will be all over the road with mixed up springs.
>
> You also have to have shackles on both springs or the springs will go
> ridged and not flex. When they springs flex, they get longer and
> shorter so a shackle is needed for this movement.
>
> Front springs have front shackles, rear springs have rear shackles.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > springs are narrower than the rear. I called the guy I bought it from
and
> > he couldn't give a reason for the difference other than that the stock
> > perches are made for those widths (front spring width is 2", rear spring
> > width is 2.5").
> >
> > I was thinking that the front holds then engine and therefore "should"
be
> > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > where the back springs are 2.5"?
> >
> > Also, on my current setup it looks like stock springs which some type of
> > shackle on the front (can't remember on the back). When I install these
> > springs and shocks should the shackle remain there or should there be no
> > shackle what so ever (looking for quality here)?
> >
> > Thanks,
> >
> > Bill
William's '83 also has two different size springs. The real test is to hold
the new springs up to the existing springs and see if they match.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40055377.1BE0855E@sympatico.ca...
> Sounds like he has mixed up YJ and CJ springs.
>
> CJ springs are 2". YJ springs are 2.5".
>
> They are 'not' interchangeable without a lot of metal fabbing and
> changing perches, shackles, etc...
>
> They also have a totally different flex rate and should not be mixed
> together. The Jeep will be all over the road with mixed up springs.
>
> You also have to have shackles on both springs or the springs will go
> ridged and not flex. When they springs flex, they get longer and
> shorter so a shackle is needed for this movement.
>
> Front springs have front shackles, rear springs have rear shackles.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > springs are narrower than the rear. I called the guy I bought it from
and
> > he couldn't give a reason for the difference other than that the stock
> > perches are made for those widths (front spring width is 2", rear spring
> > width is 2.5").
> >
> > I was thinking that the front holds then engine and therefore "should"
be
> > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > where the back springs are 2.5"?
> >
> > Also, on my current setup it looks like stock springs which some type of
> > shackle on the front (can't remember on the back). When I install these
> > springs and shocks should the shackle remain there or should there be no
> > shackle what so ever (looking for quality here)?
> >
> > Thanks,
> >
> > Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
My '81 CJ has two different size springs, it is a safe assumption that
William's '83 also has two different size springs. The real test is to hold
the new springs up to the existing springs and see if they match.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40055377.1BE0855E@sympatico.ca...
> Sounds like he has mixed up YJ and CJ springs.
>
> CJ springs are 2". YJ springs are 2.5".
>
> They are 'not' interchangeable without a lot of metal fabbing and
> changing perches, shackles, etc...
>
> They also have a totally different flex rate and should not be mixed
> together. The Jeep will be all over the road with mixed up springs.
>
> You also have to have shackles on both springs or the springs will go
> ridged and not flex. When they springs flex, they get longer and
> shorter so a shackle is needed for this movement.
>
> Front springs have front shackles, rear springs have rear shackles.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > springs are narrower than the rear. I called the guy I bought it from
and
> > he couldn't give a reason for the difference other than that the stock
> > perches are made for those widths (front spring width is 2", rear spring
> > width is 2.5").
> >
> > I was thinking that the front holds then engine and therefore "should"
be
> > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > where the back springs are 2.5"?
> >
> > Also, on my current setup it looks like stock springs which some type of
> > shackle on the front (can't remember on the back). When I install these
> > springs and shocks should the shackle remain there or should there be no
> > shackle what so ever (looking for quality here)?
> >
> > Thanks,
> >
> > Bill
William's '83 also has two different size springs. The real test is to hold
the new springs up to the existing springs and see if they match.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40055377.1BE0855E@sympatico.ca...
> Sounds like he has mixed up YJ and CJ springs.
>
> CJ springs are 2". YJ springs are 2.5".
>
> They are 'not' interchangeable without a lot of metal fabbing and
> changing perches, shackles, etc...
>
> They also have a totally different flex rate and should not be mixed
> together. The Jeep will be all over the road with mixed up springs.
>
> You also have to have shackles on both springs or the springs will go
> ridged and not flex. When they springs flex, they get longer and
> shorter so a shackle is needed for this movement.
>
> Front springs have front shackles, rear springs have rear shackles.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > springs are narrower than the rear. I called the guy I bought it from
and
> > he couldn't give a reason for the difference other than that the stock
> > perches are made for those widths (front spring width is 2", rear spring
> > width is 2.5").
> >
> > I was thinking that the front holds then engine and therefore "should"
be
> > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > where the back springs are 2.5"?
> >
> > Also, on my current setup it looks like stock springs which some type of
> > shackle on the front (can't remember on the back). When I install these
> > springs and shocks should the shackle remain there or should there be no
> > shackle what so ever (looking for quality here)?
> >
> > Thanks,
> >
> > Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
My '81 CJ has two different size springs, it is a safe assumption that
William's '83 also has two different size springs. The real test is to hold
the new springs up to the existing springs and see if they match.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40055377.1BE0855E@sympatico.ca...
> Sounds like he has mixed up YJ and CJ springs.
>
> CJ springs are 2". YJ springs are 2.5".
>
> They are 'not' interchangeable without a lot of metal fabbing and
> changing perches, shackles, etc...
>
> They also have a totally different flex rate and should not be mixed
> together. The Jeep will be all over the road with mixed up springs.
>
> You also have to have shackles on both springs or the springs will go
> ridged and not flex. When they springs flex, they get longer and
> shorter so a shackle is needed for this movement.
>
> Front springs have front shackles, rear springs have rear shackles.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > springs are narrower than the rear. I called the guy I bought it from
and
> > he couldn't give a reason for the difference other than that the stock
> > perches are made for those widths (front spring width is 2", rear spring
> > width is 2.5").
> >
> > I was thinking that the front holds then engine and therefore "should"
be
> > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > where the back springs are 2.5"?
> >
> > Also, on my current setup it looks like stock springs which some type of
> > shackle on the front (can't remember on the back). When I install these
> > springs and shocks should the shackle remain there or should there be no
> > shackle what so ever (looking for quality here)?
> >
> > Thanks,
> >
> > Bill
William's '83 also has two different size springs. The real test is to hold
the new springs up to the existing springs and see if they match.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40055377.1BE0855E@sympatico.ca...
> Sounds like he has mixed up YJ and CJ springs.
>
> CJ springs are 2". YJ springs are 2.5".
>
> They are 'not' interchangeable without a lot of metal fabbing and
> changing perches, shackles, etc...
>
> They also have a totally different flex rate and should not be mixed
> together. The Jeep will be all over the road with mixed up springs.
>
> You also have to have shackles on both springs or the springs will go
> ridged and not flex. When they springs flex, they get longer and
> shorter so a shackle is needed for this movement.
>
> Front springs have front shackles, rear springs have rear shackles.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > springs are narrower than the rear. I called the guy I bought it from
and
> > he couldn't give a reason for the difference other than that the stock
> > perches are made for those widths (front spring width is 2", rear spring
> > width is 2.5").
> >
> > I was thinking that the front holds then engine and therefore "should"
be
> > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > where the back springs are 2.5"?
> >
> > Also, on my current setup it looks like stock springs which some type of
> > shackle on the front (can't remember on the back). When I install these
> > springs and shocks should the shackle remain there or should there be no
> > shackle what so ever (looking for quality here)?
> >
> > Thanks,
> >
> > Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
That is strange, I just checked mine and the fronts are 2" and the rears
are 2.5".
Learned something new.
Mike
CRWLR wrote:
>
> My '81 CJ has two different size springs, it is a safe assumption that
> William's '83 also has two different size springs. The real test is to hold
> the new springs up to the existing springs and see if they match.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40055377.1BE0855E@sympatico.ca...
> > Sounds like he has mixed up YJ and CJ springs.
> >
> > CJ springs are 2". YJ springs are 2.5".
> >
> > They are 'not' interchangeable without a lot of metal fabbing and
> > changing perches, shackles, etc...
> >
> > They also have a totally different flex rate and should not be mixed
> > together. The Jeep will be all over the road with mixed up springs.
> >
> > You also have to have shackles on both springs or the springs will go
> > ridged and not flex. When they springs flex, they get longer and
> > shorter so a shackle is needed for this movement.
> >
> > Front springs have front shackles, rear springs have rear shackles.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > > springs are narrower than the rear. I called the guy I bought it from
> and
> > > he couldn't give a reason for the difference other than that the stock
> > > perches are made for those widths (front spring width is 2", rear spring
> > > width is 2.5").
> > >
> > > I was thinking that the front holds then engine and therefore "should"
> be
> > > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > > where the back springs are 2.5"?
> > >
> > > Also, on my current setup it looks like stock springs which some type of
> > > shackle on the front (can't remember on the back). When I install these
> > > springs and shocks should the shackle remain there or should there be no
> > > shackle what so ever (looking for quality here)?
> > >
> > > Thanks,
> > >
> > > Bill
are 2.5".
Learned something new.
Mike
CRWLR wrote:
>
> My '81 CJ has two different size springs, it is a safe assumption that
> William's '83 also has two different size springs. The real test is to hold
> the new springs up to the existing springs and see if they match.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40055377.1BE0855E@sympatico.ca...
> > Sounds like he has mixed up YJ and CJ springs.
> >
> > CJ springs are 2". YJ springs are 2.5".
> >
> > They are 'not' interchangeable without a lot of metal fabbing and
> > changing perches, shackles, etc...
> >
> > They also have a totally different flex rate and should not be mixed
> > together. The Jeep will be all over the road with mixed up springs.
> >
> > You also have to have shackles on both springs or the springs will go
> > ridged and not flex. When they springs flex, they get longer and
> > shorter so a shackle is needed for this movement.
> >
> > Front springs have front shackles, rear springs have rear shackles.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > > springs are narrower than the rear. I called the guy I bought it from
> and
> > > he couldn't give a reason for the difference other than that the stock
> > > perches are made for those widths (front spring width is 2", rear spring
> > > width is 2.5").
> > >
> > > I was thinking that the front holds then engine and therefore "should"
> be
> > > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > > where the back springs are 2.5"?
> > >
> > > Also, on my current setup it looks like stock springs which some type of
> > > shackle on the front (can't remember on the back). When I install these
> > > springs and shocks should the shackle remain there or should there be no
> > > shackle what so ever (looking for quality here)?
> > >
> > > Thanks,
> > >
> > > Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
That is strange, I just checked mine and the fronts are 2" and the rears
are 2.5".
Learned something new.
Mike
CRWLR wrote:
>
> My '81 CJ has two different size springs, it is a safe assumption that
> William's '83 also has two different size springs. The real test is to hold
> the new springs up to the existing springs and see if they match.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40055377.1BE0855E@sympatico.ca...
> > Sounds like he has mixed up YJ and CJ springs.
> >
> > CJ springs are 2". YJ springs are 2.5".
> >
> > They are 'not' interchangeable without a lot of metal fabbing and
> > changing perches, shackles, etc...
> >
> > They also have a totally different flex rate and should not be mixed
> > together. The Jeep will be all over the road with mixed up springs.
> >
> > You also have to have shackles on both springs or the springs will go
> > ridged and not flex. When they springs flex, they get longer and
> > shorter so a shackle is needed for this movement.
> >
> > Front springs have front shackles, rear springs have rear shackles.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > > springs are narrower than the rear. I called the guy I bought it from
> and
> > > he couldn't give a reason for the difference other than that the stock
> > > perches are made for those widths (front spring width is 2", rear spring
> > > width is 2.5").
> > >
> > > I was thinking that the front holds then engine and therefore "should"
> be
> > > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > > where the back springs are 2.5"?
> > >
> > > Also, on my current setup it looks like stock springs which some type of
> > > shackle on the front (can't remember on the back). When I install these
> > > springs and shocks should the shackle remain there or should there be no
> > > shackle what so ever (looking for quality here)?
> > >
> > > Thanks,
> > >
> > > Bill
are 2.5".
Learned something new.
Mike
CRWLR wrote:
>
> My '81 CJ has two different size springs, it is a safe assumption that
> William's '83 also has two different size springs. The real test is to hold
> the new springs up to the existing springs and see if they match.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40055377.1BE0855E@sympatico.ca...
> > Sounds like he has mixed up YJ and CJ springs.
> >
> > CJ springs are 2". YJ springs are 2.5".
> >
> > They are 'not' interchangeable without a lot of metal fabbing and
> > changing perches, shackles, etc...
> >
> > They also have a totally different flex rate and should not be mixed
> > together. The Jeep will be all over the road with mixed up springs.
> >
> > You also have to have shackles on both springs or the springs will go
> > ridged and not flex. When they springs flex, they get longer and
> > shorter so a shackle is needed for this movement.
> >
> > Front springs have front shackles, rear springs have rear shackles.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > > springs are narrower than the rear. I called the guy I bought it from
> and
> > > he couldn't give a reason for the difference other than that the stock
> > > perches are made for those widths (front spring width is 2", rear spring
> > > width is 2.5").
> > >
> > > I was thinking that the front holds then engine and therefore "should"
> be
> > > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > > where the back springs are 2.5"?
> > >
> > > Also, on my current setup it looks like stock springs which some type of
> > > shackle on the front (can't remember on the back). When I install these
> > > springs and shocks should the shackle remain there or should there be no
> > > shackle what so ever (looking for quality here)?
> > >
> > > Thanks,
> > >
> > > Bill
Guest
Posts: n/a
Re: Just got my 4" lift kit
That is strange, I just checked mine and the fronts are 2" and the rears
are 2.5".
Learned something new.
Mike
CRWLR wrote:
>
> My '81 CJ has two different size springs, it is a safe assumption that
> William's '83 also has two different size springs. The real test is to hold
> the new springs up to the existing springs and see if they match.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40055377.1BE0855E@sympatico.ca...
> > Sounds like he has mixed up YJ and CJ springs.
> >
> > CJ springs are 2". YJ springs are 2.5".
> >
> > They are 'not' interchangeable without a lot of metal fabbing and
> > changing perches, shackles, etc...
> >
> > They also have a totally different flex rate and should not be mixed
> > together. The Jeep will be all over the road with mixed up springs.
> >
> > You also have to have shackles on both springs or the springs will go
> > ridged and not flex. When they springs flex, they get longer and
> > shorter so a shackle is needed for this movement.
> >
> > Front springs have front shackles, rear springs have rear shackles.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > > springs are narrower than the rear. I called the guy I bought it from
> and
> > > he couldn't give a reason for the difference other than that the stock
> > > perches are made for those widths (front spring width is 2", rear spring
> > > width is 2.5").
> > >
> > > I was thinking that the front holds then engine and therefore "should"
> be
> > > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > > where the back springs are 2.5"?
> > >
> > > Also, on my current setup it looks like stock springs which some type of
> > > shackle on the front (can't remember on the back). When I install these
> > > springs and shocks should the shackle remain there or should there be no
> > > shackle what so ever (looking for quality here)?
> > >
> > > Thanks,
> > >
> > > Bill
are 2.5".
Learned something new.
Mike
CRWLR wrote:
>
> My '81 CJ has two different size springs, it is a safe assumption that
> William's '83 also has two different size springs. The real test is to hold
> the new springs up to the existing springs and see if they match.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:40055377.1BE0855E@sympatico.ca...
> > Sounds like he has mixed up YJ and CJ springs.
> >
> > CJ springs are 2". YJ springs are 2.5".
> >
> > They are 'not' interchangeable without a lot of metal fabbing and
> > changing perches, shackles, etc...
> >
> > They also have a totally different flex rate and should not be mixed
> > together. The Jeep will be all over the road with mixed up springs.
> >
> > You also have to have shackles on both springs or the springs will go
> > ridged and not flex. When they springs flex, they get longer and
> > shorter so a shackle is needed for this movement.
> >
> > Front springs have front shackles, rear springs have rear shackles.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > I just received my 4" lift kit for my 83 CJ7 and noticed that the front
> > > springs are narrower than the rear. I called the guy I bought it from
> and
> > > he couldn't give a reason for the difference other than that the stock
> > > perches are made for those widths (front spring width is 2", rear spring
> > > width is 2.5").
> > >
> > > I was thinking that the front holds then engine and therefore "should"
> be
> > > heavier and so I was wondering why the front spring width on a CJ7 is 2"
> > > where the back springs are 2.5"?
> > >
> > > Also, on my current setup it looks like stock springs which some type of
> > > shackle on the front (can't remember on the back). When I install these
> > > springs and shocks should the shackle remain there or should there be no
> > > shackle what so ever (looking for quality here)?
> > >
> > > Thanks,
> > >
> > > Bill
Thread
Thread Starter
Forum
Replies
Last Post
lucdou
Jeep & 4x4 Items Wanted
1
Apr 26, 2009 07:39 PM
William Oliveri
Jeep Mailing List
33
Jan 12, 2004 10:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
