Jeep Wrangler TJ Regearing Questions
#1
Guest
Posts: n/a
Jeep Wrangler TJ Regearing Questions
Hey all im fairly new to jeepin and i have 31" tires and the rubicon
express 2" bugdet boost and its excellent. However, i plan to add a 1
or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
american racing rims. However, i have the stock dana 35 rear with the
3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
after i install the tires and i was wondering if i needed to know
anything important about regearing. Ive read that if you change from
3.07 gears to 4.10's or 4.56's that you need to change the transfer
case??? Or do i simply just purchase the gears and nothing else? Is
it a bad idea to change gears in the dana 35?
express 2" bugdet boost and its excellent. However, i plan to add a 1
or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
american racing rims. However, i have the stock dana 35 rear with the
3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
after i install the tires and i was wondering if i needed to know
anything important about regearing. Ive read that if you change from
3.07 gears to 4.10's or 4.56's that you need to change the transfer
case??? Or do i simply just purchase the gears and nothing else? Is
it a bad idea to change gears in the dana 35?
#2
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
It's the carrier that holds the ring gear that must change between
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
#3
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
It's the carrier that holds the ring gear that must change between
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
#4
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
It's the carrier that holds the ring gear that must change between
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
#5
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
It's the carrier that holds the ring gear that must change between
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
the ratios you mentioned.
Don't waste your time regearing the Dana 35c. Or see me the
pictures to: http://www.----------.com/dana35c/ Suggestions:
http://www.off-road.com/jeep/tech/convaxle/d44.html
God Bless America, ßill O|||||||O
mailto:--------------------
Derek Proctor wrote:
>
> Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> express 2" bugdet boost and its excellent. However, i plan to add a 1
> or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> american racing rims. However, i have the stock dana 35 rear with the
> 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> after i install the tires and i was wondering if i needed to know
> anything important about regearing. Ive read that if you change from
> 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> case??? Or do i simply just purchase the gears and nothing else? Is
> it a bad idea to change gears in the dana 35?
#6
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
So Bill, what if you don't plan on doing some heavy off road driving?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
#7
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
So Bill, what if you don't plan on doing some heavy off road driving?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
#8
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
So Bill, what if you don't plan on doing some heavy off road driving?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
#9
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
So Bill, what if you don't plan on doing some heavy off road driving?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
Is it still unexceptable to upgrade a Dana 35? I am in the exact same
situation. Bought my 97 TJ before I understood the Dana 44 option was
better. I'm stuck with 3.07 gears and am considering regearing at
some point too. If you don't plan to do any heavy off roading/rock
crawling, only a little playing in the mud, is the Dana 35 really that
weak?
Brad
L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
> It's the carrier that holds the ring gear that must change between
> the ratios you mentioned.
> Don't waste your time regearing the Dana 35c. Or see me the
> pictures to: http://www.----------.com/dana35c/ Suggestions:
> http://www.off-road.com/jeep/tech/convaxle/d44.html
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Derek Proctor wrote:
> >
> > Hey all im fairly new to jeepin and i have 31" tires and the rubicon
> > express 2" bugdet boost and its excellent. However, i plan to add a 1
> > or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
> > american racing rims. However, i have the stock dana 35 rear with the
> > 3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
> > after i install the tires and i was wondering if i needed to know
> > anything important about regearing. Ive read that if you change from
> > 3.07 gears to 4.10's or 4.56's that you need to change the transfer
> > case??? Or do i simply just purchase the gears and nothing else? Is
> > it a bad idea to change gears in the dana 35?
#10
Guest
Posts: n/a
Re: Jeep Wrangler TJ Regearing Questions
With an open diff, 31" tires and light use, a D35 should hold up fine.
I managed to break some side gear teeth on my D35 with 33" tires and way
overzealous use of the gas pedal trying to get unstuck.
I geared mine cheap with used 4.10s from a 4-cyl. This allowed me to
stay mobile while I built up a D44 with air locker in my basement at my
leisure.
Steve
Brad Fuqua wrote:
> So Bill, what if you don't plan on doing some heavy off road driving?
> Is it still unexceptable to upgrade a Dana 35? I am in the exact same
> situation. Bought my 97 TJ before I understood the Dana 44 option was
> better. I'm stuck with 3.07 gears and am considering regearing at
> some point too. If you don't plan to do any heavy off roading/rock
> crawling, only a little playing in the mud, is the Dana 35 really that
> weak?
>
> Brad
>
>
>
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
>
>>It's the carrier that holds the ring gear that must change between
>>the ratios you mentioned.
>> Don't waste your time regearing the Dana 35c. Or see me the
>>pictures to: http://www.----------.com/dana35c/ Suggestions:
>>http://www.off-road.com/jeep/tech/convaxle/d44.html
>> God Bless America, ßill O|||||||O
>>mailto:--------------------
>>
>>Derek Proctor wrote:
>>
>>>Hey all im fairly new to jeepin and i have 31" tires and the rubicon
>>>express 2" bugdet boost and its excellent. However, i plan to add a 1
>>>or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
>>>american racing rims. However, i have the stock dana 35 rear with the
>>>3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
>>>after i install the tires and i was wondering if i needed to know
>>>anything important about regearing. Ive read that if you change from
>>>3.07 gears to 4.10's or 4.56's that you need to change the transfer
>>>case??? Or do i simply just purchase the gears and nothing else? Is
>>>it a bad idea to change gears in the dana 35?
I managed to break some side gear teeth on my D35 with 33" tires and way
overzealous use of the gas pedal trying to get unstuck.
I geared mine cheap with used 4.10s from a 4-cyl. This allowed me to
stay mobile while I built up a D44 with air locker in my basement at my
leisure.
Steve
Brad Fuqua wrote:
> So Bill, what if you don't plan on doing some heavy off road driving?
> Is it still unexceptable to upgrade a Dana 35? I am in the exact same
> situation. Bought my 97 TJ before I understood the Dana 44 option was
> better. I'm stuck with 3.07 gears and am considering regearing at
> some point too. If you don't plan to do any heavy off roading/rock
> crawling, only a little playing in the mud, is the Dana 35 really that
> weak?
>
> Brad
>
>
>
>
> L.W.(ßill) ------ III <----------@***.net> wrote in message news:<40AD6D7F.82886435@***.net>...
>
>>It's the carrier that holds the ring gear that must change between
>>the ratios you mentioned.
>> Don't waste your time regearing the Dana 35c. Or see me the
>>pictures to: http://www.----------.com/dana35c/ Suggestions:
>>http://www.off-road.com/jeep/tech/convaxle/d44.html
>> God Bless America, ßill O|||||||O
>>mailto:--------------------
>>
>>Derek Proctor wrote:
>>
>>>Hey all im fairly new to jeepin and i have 31" tires and the rubicon
>>>express 2" bugdet boost and its excellent. However, i plan to add a 1
>>>or 2 inch body lift soon and add 33x10.5 inch tires on my 15x7
>>>american racing rims. However, i have the stock dana 35 rear with the
>>>3.07 gears which i cannot stand. I plan to regear to 4.10's or 4.56's
>>>after i install the tires and i was wondering if i needed to know
>>>anything important about regearing. Ive read that if you change from
>>>3.07 gears to 4.10's or 4.56's that you need to change the transfer
>>>case??? Or do i simply just purchase the gears and nothing else? Is
>>>it a bad idea to change gears in the dana 35?