J D

Was out test driving my 90 wrangler 4.2 5 speed w/air. Hit a few bumps,
went through a few puddles. 1/4 mile later, the jeep just died... When I
hit the key it is dead, no idiot lights, nada.... However, the battery is
fully charged, the 4 ways work, and the head lights work. Where in gods
name do I begin to touble shoot.... There is power going to the starter, I
did the ol screwdriver test...


Thanks again for the help in advance....


John

Mike Romain

Maybe the connecting rod fell off the ignition switch? The key switch
part is up top with a metal rod running down the steering column to the
switch. The actual ignition switch is down low on the steering column.
The switch is also adjustable, maybe the bolts fell out?

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

J D wrote:
>
> Was out test driving my 90 wrangler 4.2 5 speed w/air. Hit a few bumps,
> went through a few puddles. 1/4 mile later, the jeep just died... When I
> hit the key it is dead, no idiot lights, nada.... However, the battery is
> fully charged, the 4 ways work, and the head lights work. Where in gods
> name do I begin to touble shoot.... There is power going to the starter, I
> did the ol screwdriver test...
>
> Thanks again for the help in advance....
>
> John

Mike Romain

Maybe the connecting rod fell off the ignition switch? The key switch
part is up top with a metal rod running down the steering column to the
switch. The actual ignition switch is down low on the steering column.
The switch is also adjustable, maybe the bolts fell out?

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

J D wrote:
>
> Was out test driving my 90 wrangler 4.2 5 speed w/air. Hit a few bumps,
> went through a few puddles. 1/4 mile later, the jeep just died... When I
> hit the key it is dead, no idiot lights, nada.... However, the battery is
> fully charged, the 4 ways work, and the head lights work. Where in gods
> name do I begin to touble shoot.... There is power going to the starter, I
> did the ol screwdriver test...
>
> Thanks again for the help in advance....
>
> John

Mike Romain

Maybe the connecting rod fell off the ignition switch? The key switch
part is up top with a metal rod running down the steering column to the
switch. The actual ignition switch is down low on the steering column.
The switch is also adjustable, maybe the bolts fell out?

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

J D wrote:
>
> Was out test driving my 90 wrangler 4.2 5 speed w/air. Hit a few bumps,
> went through a few puddles. 1/4 mile later, the jeep just died... When I
> hit the key it is dead, no idiot lights, nada.... However, the battery is
> fully charged, the 4 ways work, and the head lights work. Where in gods
> name do I begin to touble shoot.... There is power going to the starter, I
> did the ol screwdriver test...
>
> Thanks again for the help in advance....
>
> John

griffin

Yup, good place to start. The rod on my '88 YJ was bent when I bought it and
before I got it fixed, I had to use a pair of vice grips to pre-pull the rod
before using the key in order to get it to start. But of course the 4-ways
and other non-ignition related things all worked. Have fun with the column
tho - I ended up with a yogurt container full of extra parts after I put it
back together. Guess I shoulda got a manual. ;p

--
griffin
'85 Jeep CJ-7
'97 Toyota Corolla SD

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A1178D.85A8DA9A@sympatico.ca...
> Maybe the connecting rod fell off the ignition switch? The key switch
> part is up top with a metal rod running down the steering column to the
> switch. The actual ignition switch is down low on the steering column.
> The switch is also adjustable, maybe the bolts fell out?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's

griffin

Yup, good place to start. The rod on my '88 YJ was bent when I bought it and
before I got it fixed, I had to use a pair of vice grips to pre-pull the rod
before using the key in order to get it to start. But of course the 4-ways
and other non-ignition related things all worked. Have fun with the column
tho - I ended up with a yogurt container full of extra parts after I put it
back together. Guess I shoulda got a manual. ;p

--
griffin
'85 Jeep CJ-7
'97 Toyota Corolla SD

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A1178D.85A8DA9A@sympatico.ca...
> Maybe the connecting rod fell off the ignition switch? The key switch
> part is up top with a metal rod running down the steering column to the
> switch. The actual ignition switch is down low on the steering column.
> The switch is also adjustable, maybe the bolts fell out?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's

griffin

Yup, good place to start. The rod on my '88 YJ was bent when I bought it and
before I got it fixed, I had to use a pair of vice grips to pre-pull the rod
before using the key in order to get it to start. But of course the 4-ways
and other non-ignition related things all worked. Have fun with the column
tho - I ended up with a yogurt container full of extra parts after I put it
back together. Guess I shoulda got a manual. ;p

--
griffin
'85 Jeep CJ-7
'97 Toyota Corolla SD

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:41A1178D.85A8DA9A@sympatico.ca...
> Maybe the connecting rod fell off the ignition switch? The key switch
> part is up top with a metal rod running down the steering column to the
> switch. The actual ignition switch is down low on the steering column.
> The switch is also adjustable, maybe the bolts fell out?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's