Jeep hardtop back on
#1
Guest
Posts: n/a
Jeep hardtop back on
Well I finally had to do it, after 3 years of running with nothing but the
soft top I had to put the hard top back on..... I was closing up the
passengers side window insert the other day and all the stitching along the
top just ripped right out. It had been going in little spots here and there
but it finally gave up the ghost the other day and just ripped all the way.
The plastic parts that clip under the door panel have been ripping out too.
The top lasted for 7 years so I guess that is pretty good. But next summer
I will have to purchase a new one. Well at least I have all winter to save
up.
Tom
ps, Kate, I used to store my soft to in a spare room of the house, just
unbolt all the metal support rods and take out all the windows and it will
roll up tight. Then you can just stack the windows against the wall and lay
the top down flat on the floor up against the wall. Maybe if I had done
that these last to winters mine would have lasted longer....This keeps it
out of the way of the mice and things that are in the outside storage areas
and you wont have to worry about the critters eating at it.
soft top I had to put the hard top back on..... I was closing up the
passengers side window insert the other day and all the stitching along the
top just ripped right out. It had been going in little spots here and there
but it finally gave up the ghost the other day and just ripped all the way.
The plastic parts that clip under the door panel have been ripping out too.
The top lasted for 7 years so I guess that is pretty good. But next summer
I will have to purchase a new one. Well at least I have all winter to save
up.
Tom
ps, Kate, I used to store my soft to in a spare room of the house, just
unbolt all the metal support rods and take out all the windows and it will
roll up tight. Then you can just stack the windows against the wall and lay
the top down flat on the floor up against the wall. Maybe if I had done
that these last to winters mine would have lasted longer....This keeps it
out of the way of the mice and things that are in the outside storage areas
and you wont have to worry about the critters eating at it.
#2
Guest
Posts: n/a
Re: Jeep hardtop back on
You can probably have your local shoemaker redo the stitching.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> Well I finally had to do it, after 3 years of running with nothing but the
> soft top I had to put the hard top back on..... I was closing up the
> passengers side window insert the other day and all the stitching along
> the top just ripped right out. It had been going in little spots here and
> there but it finally gave up the ghost the other day and just ripped all
> the way. The plastic parts that clip under the door panel have been
> ripping out too. The top lasted for 7 years so I guess that is pretty
> good. But next summer I will have to purchase a new one. Well at least I
> have all winter to save up.
>
> Tom
>
> ps, Kate, I used to store my soft to in a spare room of the house, just
> unbolt all the metal support rods and take out all the windows and it will
> roll up tight. Then you can just stack the windows against the wall and
> lay the top down flat on the floor up against the wall. Maybe if I had
> done that these last to winters mine would have lasted longer....This
> keeps it out of the way of the mice and things that are in the outside
> storage areas and you wont have to worry about the critters eating at it.
>
>
>
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> Well I finally had to do it, after 3 years of running with nothing but the
> soft top I had to put the hard top back on..... I was closing up the
> passengers side window insert the other day and all the stitching along
> the top just ripped right out. It had been going in little spots here and
> there but it finally gave up the ghost the other day and just ripped all
> the way. The plastic parts that clip under the door panel have been
> ripping out too. The top lasted for 7 years so I guess that is pretty
> good. But next summer I will have to purchase a new one. Well at least I
> have all winter to save up.
>
> Tom
>
> ps, Kate, I used to store my soft to in a spare room of the house, just
> unbolt all the metal support rods and take out all the windows and it will
> roll up tight. Then you can just stack the windows against the wall and
> lay the top down flat on the floor up against the wall. Maybe if I had
> done that these last to winters mine would have lasted longer....This
> keeps it out of the way of the mice and things that are in the outside
> storage areas and you wont have to worry about the critters eating at it.
>
>
>
#3
Guest
Posts: n/a
Re: Jeep hardtop back on
You can probably have your local shoemaker redo the stitching.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> Well I finally had to do it, after 3 years of running with nothing but the
> soft top I had to put the hard top back on..... I was closing up the
> passengers side window insert the other day and all the stitching along
> the top just ripped right out. It had been going in little spots here and
> there but it finally gave up the ghost the other day and just ripped all
> the way. The plastic parts that clip under the door panel have been
> ripping out too. The top lasted for 7 years so I guess that is pretty
> good. But next summer I will have to purchase a new one. Well at least I
> have all winter to save up.
>
> Tom
>
> ps, Kate, I used to store my soft to in a spare room of the house, just
> unbolt all the metal support rods and take out all the windows and it will
> roll up tight. Then you can just stack the windows against the wall and
> lay the top down flat on the floor up against the wall. Maybe if I had
> done that these last to winters mine would have lasted longer....This
> keeps it out of the way of the mice and things that are in the outside
> storage areas and you wont have to worry about the critters eating at it.
>
>
>
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> Well I finally had to do it, after 3 years of running with nothing but the
> soft top I had to put the hard top back on..... I was closing up the
> passengers side window insert the other day and all the stitching along
> the top just ripped right out. It had been going in little spots here and
> there but it finally gave up the ghost the other day and just ripped all
> the way. The plastic parts that clip under the door panel have been
> ripping out too. The top lasted for 7 years so I guess that is pretty
> good. But next summer I will have to purchase a new one. Well at least I
> have all winter to save up.
>
> Tom
>
> ps, Kate, I used to store my soft to in a spare room of the house, just
> unbolt all the metal support rods and take out all the windows and it will
> roll up tight. Then you can just stack the windows against the wall and
> lay the top down flat on the floor up against the wall. Maybe if I had
> done that these last to winters mine would have lasted longer....This
> keeps it out of the way of the mice and things that are in the outside
> storage areas and you wont have to worry about the critters eating at it.
>
>
>
#4
Guest
Posts: n/a
Re: Jeep hardtop back on
You can probably have your local shoemaker redo the stitching.
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> Well I finally had to do it, after 3 years of running with nothing but the
> soft top I had to put the hard top back on..... I was closing up the
> passengers side window insert the other day and all the stitching along
> the top just ripped right out. It had been going in little spots here and
> there but it finally gave up the ghost the other day and just ripped all
> the way. The plastic parts that clip under the door panel have been
> ripping out too. The top lasted for 7 years so I guess that is pretty
> good. But next summer I will have to purchase a new one. Well at least I
> have all winter to save up.
>
> Tom
>
> ps, Kate, I used to store my soft to in a spare room of the house, just
> unbolt all the metal support rods and take out all the windows and it will
> roll up tight. Then you can just stack the windows against the wall and
> lay the top down flat on the floor up against the wall. Maybe if I had
> done that these last to winters mine would have lasted longer....This
> keeps it out of the way of the mice and things that are in the outside
> storage areas and you wont have to worry about the critters eating at it.
>
>
>
"cantrelm" <cantrelm@bellsouth.net> wrote in message
news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> Well I finally had to do it, after 3 years of running with nothing but the
> soft top I had to put the hard top back on..... I was closing up the
> passengers side window insert the other day and all the stitching along
> the top just ripped right out. It had been going in little spots here and
> there but it finally gave up the ghost the other day and just ripped all
> the way. The plastic parts that clip under the door panel have been
> ripping out too. The top lasted for 7 years so I guess that is pretty
> good. But next summer I will have to purchase a new one. Well at least I
> have all winter to save up.
>
> Tom
>
> ps, Kate, I used to store my soft to in a spare room of the house, just
> unbolt all the metal support rods and take out all the windows and it will
> roll up tight. Then you can just stack the windows against the wall and
> lay the top down flat on the floor up against the wall. Maybe if I had
> done that these last to winters mine would have lasted longer....This
> keeps it out of the way of the mice and things that are in the outside
> storage areas and you wont have to worry about the critters eating at it.
>
>
>
#5
Guest
Posts: n/a
Re: Jeep hardtop back on
Water is what makes stitches go bad. I have ten years on my OEM soft top.
Bestop Replace-a-Top is a good option if your hardware is still good.
Earle
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> > Well I finally had to do it, after 3 years of running with nothing but
the
> > soft top I had to put the hard top back on..... I was closing up the
> > passengers side window insert the other day and all the stitching along
> > the top just ripped right out. It had been going in little spots here
and
> > there but it finally gave up the ghost the other day and just ripped all
> > the way. The plastic parts that clip under the door panel have been
> > ripping out too. The top lasted for 7 years so I guess that is pretty
> > good. But next summer I will have to purchase a new one. Well at least
I
> > have all winter to save up.
> >
> > Tom
> >
> > ps, Kate, I used to store my soft to in a spare room of the house, just
> > unbolt all the metal support rods and take out all the windows and it
will
> > roll up tight. Then you can just stack the windows against the wall and
> > lay the top down flat on the floor up against the wall. Maybe if I had
> > done that these last to winters mine would have lasted longer....This
> > keeps it out of the way of the mice and things that are in the outside
> > storage areas and you wont have to worry about the critters eating at
it.
> >
> >
> >
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Bestop Replace-a-Top is a good option if your hardware is still good.
Earle
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> > Well I finally had to do it, after 3 years of running with nothing but
the
> > soft top I had to put the hard top back on..... I was closing up the
> > passengers side window insert the other day and all the stitching along
> > the top just ripped right out. It had been going in little spots here
and
> > there but it finally gave up the ghost the other day and just ripped all
> > the way. The plastic parts that clip under the door panel have been
> > ripping out too. The top lasted for 7 years so I guess that is pretty
> > good. But next summer I will have to purchase a new one. Well at least
I
> > have all winter to save up.
> >
> > Tom
> >
> > ps, Kate, I used to store my soft to in a spare room of the house, just
> > unbolt all the metal support rods and take out all the windows and it
will
> > roll up tight. Then you can just stack the windows against the wall and
> > lay the top down flat on the floor up against the wall. Maybe if I had
> > done that these last to winters mine would have lasted longer....This
> > keeps it out of the way of the mice and things that are in the outside
> > storage areas and you wont have to worry about the critters eating at
it.
> >
> >
> >
>
>
--
Posted via a free Usenet account from http://www.teranews.com
#6
Guest
Posts: n/a
Re: Jeep hardtop back on
Water is what makes stitches go bad. I have ten years on my OEM soft top.
Bestop Replace-a-Top is a good option if your hardware is still good.
Earle
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> > Well I finally had to do it, after 3 years of running with nothing but
the
> > soft top I had to put the hard top back on..... I was closing up the
> > passengers side window insert the other day and all the stitching along
> > the top just ripped right out. It had been going in little spots here
and
> > there but it finally gave up the ghost the other day and just ripped all
> > the way. The plastic parts that clip under the door panel have been
> > ripping out too. The top lasted for 7 years so I guess that is pretty
> > good. But next summer I will have to purchase a new one. Well at least
I
> > have all winter to save up.
> >
> > Tom
> >
> > ps, Kate, I used to store my soft to in a spare room of the house, just
> > unbolt all the metal support rods and take out all the windows and it
will
> > roll up tight. Then you can just stack the windows against the wall and
> > lay the top down flat on the floor up against the wall. Maybe if I had
> > done that these last to winters mine would have lasted longer....This
> > keeps it out of the way of the mice and things that are in the outside
> > storage areas and you wont have to worry about the critters eating at
it.
> >
> >
> >
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Bestop Replace-a-Top is a good option if your hardware is still good.
Earle
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> > Well I finally had to do it, after 3 years of running with nothing but
the
> > soft top I had to put the hard top back on..... I was closing up the
> > passengers side window insert the other day and all the stitching along
> > the top just ripped right out. It had been going in little spots here
and
> > there but it finally gave up the ghost the other day and just ripped all
> > the way. The plastic parts that clip under the door panel have been
> > ripping out too. The top lasted for 7 years so I guess that is pretty
> > good. But next summer I will have to purchase a new one. Well at least
I
> > have all winter to save up.
> >
> > Tom
> >
> > ps, Kate, I used to store my soft to in a spare room of the house, just
> > unbolt all the metal support rods and take out all the windows and it
will
> > roll up tight. Then you can just stack the windows against the wall and
> > lay the top down flat on the floor up against the wall. Maybe if I had
> > done that these last to winters mine would have lasted longer....This
> > keeps it out of the way of the mice and things that are in the outside
> > storage areas and you wont have to worry about the critters eating at
it.
> >
> >
> >
>
>
--
Posted via a free Usenet account from http://www.teranews.com
#7
Guest
Posts: n/a
Re: Jeep hardtop back on
Water is what makes stitches go bad. I have ten years on my OEM soft top.
Bestop Replace-a-Top is a good option if your hardware is still good.
Earle
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> > Well I finally had to do it, after 3 years of running with nothing but
the
> > soft top I had to put the hard top back on..... I was closing up the
> > passengers side window insert the other day and all the stitching along
> > the top just ripped right out. It had been going in little spots here
and
> > there but it finally gave up the ghost the other day and just ripped all
> > the way. The plastic parts that clip under the door panel have been
> > ripping out too. The top lasted for 7 years so I guess that is pretty
> > good. But next summer I will have to purchase a new one. Well at least
I
> > have all winter to save up.
> >
> > Tom
> >
> > ps, Kate, I used to store my soft to in a spare room of the house, just
> > unbolt all the metal support rods and take out all the windows and it
will
> > roll up tight. Then you can just stack the windows against the wall and
> > lay the top down flat on the floor up against the wall. Maybe if I had
> > done that these last to winters mine would have lasted longer....This
> > keeps it out of the way of the mice and things that are in the outside
> > storage areas and you wont have to worry about the critters eating at
it.
> >
> >
> >
>
>
--
Posted via a free Usenet account from http://www.teranews.com
Bestop Replace-a-Top is a good option if your hardware is still good.
Earle
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
> > Well I finally had to do it, after 3 years of running with nothing but
the
> > soft top I had to put the hard top back on..... I was closing up the
> > passengers side window insert the other day and all the stitching along
> > the top just ripped right out. It had been going in little spots here
and
> > there but it finally gave up the ghost the other day and just ripped all
> > the way. The plastic parts that clip under the door panel have been
> > ripping out too. The top lasted for 7 years so I guess that is pretty
> > good. But next summer I will have to purchase a new one. Well at least
I
> > have all winter to save up.
> >
> > Tom
> >
> > ps, Kate, I used to store my soft to in a spare room of the house, just
> > unbolt all the metal support rods and take out all the windows and it
will
> > roll up tight. Then you can just stack the windows against the wall and
> > lay the top down flat on the floor up against the wall. Maybe if I had
> > done that these last to winters mine would have lasted longer....This
> > keeps it out of the way of the mice and things that are in the outside
> > storage areas and you wont have to worry about the critters eating at
it.
> >
> >
> >
>
>
--
Posted via a free Usenet account from http://www.teranews.com
#8
Guest
Posts: n/a
Re: Jeep hardtop back on
I thought about that, but it also has a couple of holes in it. One right
over the passenger seat, and my wife is tired of it leaking on her when it
is pouring down rain outside. So I will save my money and get me one of the
heavier sail cloth ones that fits the 2000 TJ. Get the black out windows
too!
Tom
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
>> Well I finally had to do it, after 3 years of running with nothing but
>> the soft top I had to put the hard top back on..... I was closing up the
>> passengers side window insert the other day and all the stitching along
>> the top just ripped right out. It had been going in little spots here
>> and there but it finally gave up the ghost the other day and just ripped
>> all the way. The plastic parts that clip under the door panel have been
>> ripping out too. The top lasted for 7 years so I guess that is pretty
>> good. But next summer I will have to purchase a new one. Well at least
>> I have all winter to save up.
>>
>> Tom
>>
>> ps, Kate, I used to store my soft to in a spare room of the house, just
>> unbolt all the metal support rods and take out all the windows and it
>> will roll up tight. Then you can just stack the windows against the wall
>> and lay the top down flat on the floor up against the wall. Maybe if I
>> had done that these last to winters mine would have lasted longer....This
>> keeps it out of the way of the mice and things that are in the outside
>> storage areas and you wont have to worry about the critters eating at it.
>>
>>
>>
>
>
over the passenger seat, and my wife is tired of it leaking on her when it
is pouring down rain outside. So I will save my money and get me one of the
heavier sail cloth ones that fits the 2000 TJ. Get the black out windows
too!
Tom
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
>> Well I finally had to do it, after 3 years of running with nothing but
>> the soft top I had to put the hard top back on..... I was closing up the
>> passengers side window insert the other day and all the stitching along
>> the top just ripped right out. It had been going in little spots here
>> and there but it finally gave up the ghost the other day and just ripped
>> all the way. The plastic parts that clip under the door panel have been
>> ripping out too. The top lasted for 7 years so I guess that is pretty
>> good. But next summer I will have to purchase a new one. Well at least
>> I have all winter to save up.
>>
>> Tom
>>
>> ps, Kate, I used to store my soft to in a spare room of the house, just
>> unbolt all the metal support rods and take out all the windows and it
>> will roll up tight. Then you can just stack the windows against the wall
>> and lay the top down flat on the floor up against the wall. Maybe if I
>> had done that these last to winters mine would have lasted longer....This
>> keeps it out of the way of the mice and things that are in the outside
>> storage areas and you wont have to worry about the critters eating at it.
>>
>>
>>
>
>
#9
Guest
Posts: n/a
Re: Jeep hardtop back on
I thought about that, but it also has a couple of holes in it. One right
over the passenger seat, and my wife is tired of it leaking on her when it
is pouring down rain outside. So I will save my money and get me one of the
heavier sail cloth ones that fits the 2000 TJ. Get the black out windows
too!
Tom
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
>> Well I finally had to do it, after 3 years of running with nothing but
>> the soft top I had to put the hard top back on..... I was closing up the
>> passengers side window insert the other day and all the stitching along
>> the top just ripped right out. It had been going in little spots here
>> and there but it finally gave up the ghost the other day and just ripped
>> all the way. The plastic parts that clip under the door panel have been
>> ripping out too. The top lasted for 7 years so I guess that is pretty
>> good. But next summer I will have to purchase a new one. Well at least
>> I have all winter to save up.
>>
>> Tom
>>
>> ps, Kate, I used to store my soft to in a spare room of the house, just
>> unbolt all the metal support rods and take out all the windows and it
>> will roll up tight. Then you can just stack the windows against the wall
>> and lay the top down flat on the floor up against the wall. Maybe if I
>> had done that these last to winters mine would have lasted longer....This
>> keeps it out of the way of the mice and things that are in the outside
>> storage areas and you wont have to worry about the critters eating at it.
>>
>>
>>
>
>
over the passenger seat, and my wife is tired of it leaking on her when it
is pouring down rain outside. So I will save my money and get me one of the
heavier sail cloth ones that fits the 2000 TJ. Get the black out windows
too!
Tom
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
>> Well I finally had to do it, after 3 years of running with nothing but
>> the soft top I had to put the hard top back on..... I was closing up the
>> passengers side window insert the other day and all the stitching along
>> the top just ripped right out. It had been going in little spots here
>> and there but it finally gave up the ghost the other day and just ripped
>> all the way. The plastic parts that clip under the door panel have been
>> ripping out too. The top lasted for 7 years so I guess that is pretty
>> good. But next summer I will have to purchase a new one. Well at least
>> I have all winter to save up.
>>
>> Tom
>>
>> ps, Kate, I used to store my soft to in a spare room of the house, just
>> unbolt all the metal support rods and take out all the windows and it
>> will roll up tight. Then you can just stack the windows against the wall
>> and lay the top down flat on the floor up against the wall. Maybe if I
>> had done that these last to winters mine would have lasted longer....This
>> keeps it out of the way of the mice and things that are in the outside
>> storage areas and you wont have to worry about the critters eating at it.
>>
>>
>>
>
>
#10
Guest
Posts: n/a
Re: Jeep hardtop back on
I thought about that, but it also has a couple of holes in it. One right
over the passenger seat, and my wife is tired of it leaking on her when it
is pouring down rain outside. So I will save my money and get me one of the
heavier sail cloth ones that fits the 2000 TJ. Get the black out windows
too!
Tom
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
>> Well I finally had to do it, after 3 years of running with nothing but
>> the soft top I had to put the hard top back on..... I was closing up the
>> passengers side window insert the other day and all the stitching along
>> the top just ripped right out. It had been going in little spots here
>> and there but it finally gave up the ghost the other day and just ripped
>> all the way. The plastic parts that clip under the door panel have been
>> ripping out too. The top lasted for 7 years so I guess that is pretty
>> good. But next summer I will have to purchase a new one. Well at least
>> I have all winter to save up.
>>
>> Tom
>>
>> ps, Kate, I used to store my soft to in a spare room of the house, just
>> unbolt all the metal support rods and take out all the windows and it
>> will roll up tight. Then you can just stack the windows against the wall
>> and lay the top down flat on the floor up against the wall. Maybe if I
>> had done that these last to winters mine would have lasted longer....This
>> keeps it out of the way of the mice and things that are in the outside
>> storage areas and you wont have to worry about the critters eating at it.
>>
>>
>>
>
>
over the passenger seat, and my wife is tired of it leaking on her when it
is pouring down rain outside. So I will save my money and get me one of the
heavier sail cloth ones that fits the 2000 TJ. Get the black out windows
too!
Tom
"billy ray" <billy_ray@SPAMfuse.net> wrote in message
news:2813b$455a0e22$422afc51$4027@FUSE.NET...
> You can probably have your local shoemaker redo the stitching.
>
>
> "cantrelm" <cantrelm@bellsouth.net> wrote in message
> news:BXl6h.19540$GE1.18707@bignews7.bellsouth.net. ..
>> Well I finally had to do it, after 3 years of running with nothing but
>> the soft top I had to put the hard top back on..... I was closing up the
>> passengers side window insert the other day and all the stitching along
>> the top just ripped right out. It had been going in little spots here
>> and there but it finally gave up the ghost the other day and just ripped
>> all the way. The plastic parts that clip under the door panel have been
>> ripping out too. The top lasted for 7 years so I guess that is pretty
>> good. But next summer I will have to purchase a new one. Well at least
>> I have all winter to save up.
>>
>> Tom
>>
>> ps, Kate, I used to store my soft to in a spare room of the house, just
>> unbolt all the metal support rods and take out all the windows and it
>> will roll up tight. Then you can just stack the windows against the wall
>> and lay the top down flat on the floor up against the wall. Maybe if I
>> had done that these last to winters mine would have lasted longer....This
>> keeps it out of the way of the mice and things that are in the outside
>> storage areas and you wont have to worry about the critters eating at it.
>>
>>
>>
>
>