Jeep Door holder -- $6.84
#1
Guest
Posts: n/a
Jeep Door holder -- $6.84
Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
Parts:
1. Flip up tool holder
2. 1" pipe insulation
http://jeep.dyndns.tv/images/jeep/parts.jpg
I cut the insulation and slipped a piece over each bar of the tool holder.
I also stapeled a piece of the insulation on the horizintal 2x4 on the wall
to protect the door. Another piece was put between the doors. Very simple
and CHEAP.
http://jeep.dyndns.tv/images/jeep/finished.jpg
Parts:
1. Flip up tool holder
2. 1" pipe insulation
http://jeep.dyndns.tv/images/jeep/parts.jpg
I cut the insulation and slipped a piece over each bar of the tool holder.
I also stapeled a piece of the insulation on the horizintal 2x4 on the wall
to protect the door. Another piece was put between the doors. Very simple
and CHEAP.
http://jeep.dyndns.tv/images/jeep/finished.jpg
#2
Guest
Posts: n/a
Re: Jeep Door holder -- $6.84
too bad the bike had to scratch your door.....
"Joe" <jo_ratner@yahoo.com> wrote in message
news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> Parts:
> 1. Flip up tool holder
> 2. 1" pipe insulation
> http://jeep.dyndns.tv/images/jeep/parts.jpg
> I cut the insulation and slipped a piece over each bar of the tool holder.
> I also stapeled a piece of the insulation on the horizintal 2x4 on the
wall
> to protect the door. Another piece was put between the doors. Very
simple
> and CHEAP.
> http://jeep.dyndns.tv/images/jeep/finished.jpg
>
>
>
"Joe" <jo_ratner@yahoo.com> wrote in message
news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> Parts:
> 1. Flip up tool holder
> 2. 1" pipe insulation
> http://jeep.dyndns.tv/images/jeep/parts.jpg
> I cut the insulation and slipped a piece over each bar of the tool holder.
> I also stapeled a piece of the insulation on the horizintal 2x4 on the
wall
> to protect the door. Another piece was put between the doors. Very
simple
> and CHEAP.
> http://jeep.dyndns.tv/images/jeep/finished.jpg
>
>
>
#3
Guest
Posts: n/a
Re: Jeep Door holder -- $6.84
too bad the bike had to scratch your door.....
"Joe" <jo_ratner@yahoo.com> wrote in message
news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> Parts:
> 1. Flip up tool holder
> 2. 1" pipe insulation
> http://jeep.dyndns.tv/images/jeep/parts.jpg
> I cut the insulation and slipped a piece over each bar of the tool holder.
> I also stapeled a piece of the insulation on the horizintal 2x4 on the
wall
> to protect the door. Another piece was put between the doors. Very
simple
> and CHEAP.
> http://jeep.dyndns.tv/images/jeep/finished.jpg
>
>
>
"Joe" <jo_ratner@yahoo.com> wrote in message
news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> Parts:
> 1. Flip up tool holder
> 2. 1" pipe insulation
> http://jeep.dyndns.tv/images/jeep/parts.jpg
> I cut the insulation and slipped a piece over each bar of the tool holder.
> I also stapeled a piece of the insulation on the horizintal 2x4 on the
wall
> to protect the door. Another piece was put between the doors. Very
simple
> and CHEAP.
> http://jeep.dyndns.tv/images/jeep/finished.jpg
>
>
>
#4
Guest
Posts: n/a
Re: Jeep Door holder -- $6.84
All scratches are original. The only part of the bike that comes close to
touching the door is the tire...
"Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> too bad the bike had to scratch your door.....
>
>
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > Parts:
> > 1. Flip up tool holder
> > 2. 1" pipe insulation
> > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > I cut the insulation and slipped a piece over each bar of the tool
holder.
> > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> wall
> > to protect the door. Another piece was put between the doors. Very
> simple
> > and CHEAP.
> > http://jeep.dyndns.tv/images/jeep/finished.jpg
> >
> >
> >
>
>
touching the door is the tire...
"Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> too bad the bike had to scratch your door.....
>
>
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > Parts:
> > 1. Flip up tool holder
> > 2. 1" pipe insulation
> > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > I cut the insulation and slipped a piece over each bar of the tool
holder.
> > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> wall
> > to protect the door. Another piece was put between the doors. Very
> simple
> > and CHEAP.
> > http://jeep.dyndns.tv/images/jeep/finished.jpg
> >
> >
> >
>
>
#5
Guest
Posts: n/a
Re: Jeep Door holder -- $6.84
All scratches are original. The only part of the bike that comes close to
touching the door is the tire...
"Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> too bad the bike had to scratch your door.....
>
>
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > Parts:
> > 1. Flip up tool holder
> > 2. 1" pipe insulation
> > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > I cut the insulation and slipped a piece over each bar of the tool
holder.
> > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> wall
> > to protect the door. Another piece was put between the doors. Very
> simple
> > and CHEAP.
> > http://jeep.dyndns.tv/images/jeep/finished.jpg
> >
> >
> >
>
>
touching the door is the tire...
"Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> too bad the bike had to scratch your door.....
>
>
> "Joe" <jo_ratner@yahoo.com> wrote in message
> news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > Parts:
> > 1. Flip up tool holder
> > 2. 1" pipe insulation
> > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > I cut the insulation and slipped a piece over each bar of the tool
holder.
> > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> wall
> > to protect the door. Another piece was put between the doors. Very
> simple
> > and CHEAP.
> > http://jeep.dyndns.tv/images/jeep/finished.jpg
> >
> >
> >
>
>
#6
Guest
Posts: n/a
Re: Jeep Door holder -- $6.84
Thats good, it looked like the hand brake put the smalll scratch at the top
front of the door.......perfect size and shape. In the pic it looks a lot
closer.....
"Joe" <jo_ratner@yahoo.com> wrote in message
news:O5z0b.820$B8.571@newsread2.news.atl.earthlink .net...
> All scratches are original. The only part of the bike that comes close to
> touching the door is the tire...
>
> "Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
> news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> > too bad the bike had to scratch your door.....
> >
> >
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > > Parts:
> > > 1. Flip up tool holder
> > > 2. 1" pipe insulation
> > > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > > I cut the insulation and slipped a piece over each bar of the tool
> holder.
> > > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> > wall
> > > to protect the door. Another piece was put between the doors. Very
> > simple
> > > and CHEAP.
> > > http://jeep.dyndns.tv/images/jeep/finished.jpg
> > >
> > >
> > >
> >
> >
>
>
front of the door.......perfect size and shape. In the pic it looks a lot
closer.....
"Joe" <jo_ratner@yahoo.com> wrote in message
news:O5z0b.820$B8.571@newsread2.news.atl.earthlink .net...
> All scratches are original. The only part of the bike that comes close to
> touching the door is the tire...
>
> "Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
> news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> > too bad the bike had to scratch your door.....
> >
> >
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > > Parts:
> > > 1. Flip up tool holder
> > > 2. 1" pipe insulation
> > > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > > I cut the insulation and slipped a piece over each bar of the tool
> holder.
> > > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> > wall
> > > to protect the door. Another piece was put between the doors. Very
> > simple
> > > and CHEAP.
> > > http://jeep.dyndns.tv/images/jeep/finished.jpg
> > >
> > >
> > >
> >
> >
>
>
#7
Guest
Posts: n/a
Re: Jeep Door holder -- $6.84
Thats good, it looked like the hand brake put the smalll scratch at the top
front of the door.......perfect size and shape. In the pic it looks a lot
closer.....
"Joe" <jo_ratner@yahoo.com> wrote in message
news:O5z0b.820$B8.571@newsread2.news.atl.earthlink .net...
> All scratches are original. The only part of the bike that comes close to
> touching the door is the tire...
>
> "Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
> news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> > too bad the bike had to scratch your door.....
> >
> >
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > > Parts:
> > > 1. Flip up tool holder
> > > 2. 1" pipe insulation
> > > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > > I cut the insulation and slipped a piece over each bar of the tool
> holder.
> > > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> > wall
> > > to protect the door. Another piece was put between the doors. Very
> > simple
> > > and CHEAP.
> > > http://jeep.dyndns.tv/images/jeep/finished.jpg
> > >
> > >
> > >
> >
> >
>
>
front of the door.......perfect size and shape. In the pic it looks a lot
closer.....
"Joe" <jo_ratner@yahoo.com> wrote in message
news:O5z0b.820$B8.571@newsread2.news.atl.earthlink .net...
> All scratches are original. The only part of the bike that comes close to
> touching the door is the tire...
>
> "Johnathan Marrin" <johnathanmarrin@hotmail.com> wrote in message
> news:%Vw0b.224921$hOa.56938@news02.bloor.is.net.ca ble.rogers.com...
> > too bad the bike had to scratch your door.....
> >
> >
> > "Joe" <jo_ratner@yahoo.com> wrote in message
> > news:%OT%a.21706$BC2.15821@newsread2.news.atl.eart hlink.net...
> > > Here's how I hang my Jeep hard doors. Costs $6.84 at home depot.
> > > Parts:
> > > 1. Flip up tool holder
> > > 2. 1" pipe insulation
> > > http://jeep.dyndns.tv/images/jeep/parts.jpg
> > > I cut the insulation and slipped a piece over each bar of the tool
> holder.
> > > I also stapeled a piece of the insulation on the horizintal 2x4 on the
> > wall
> > > to protect the door. Another piece was put between the doors. Very
> > simple
> > > and CHEAP.
> > > http://jeep.dyndns.tv/images/jeep/finished.jpg
> > >
> > >
> > >
> >
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
olliebamino
Jeep JK Forum
1
09-10-2010 09:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)