Jackstand position under a jeep
05-17-2007, 02:23 PM
#21
Guest
Posts: n/a
Re: Jackstand position under a jeep
On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
> stilllearning proclaimed:
>
> > The factory manual specifically mentions not place jackstands under
> > the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
> > the issue? The axle seem like an ideal location for lifting the jeep
> > at the front, back or both.
>
> > So, should I place jackstands under the frame only?
>
> The manual shows the jacking points. There is no frame on the Grand.
>
> Or you could put the jacks under the axle on both sides if you want a
> quick way to drop the height an inch or so and don't mind the noise of a
> bent axle.
Why then does the owner's manual mention that the stock jack should be
placed under the axle when changing tires? Could it be that it is OK
to use the axle as a lift point for a short time? I find that my 2 1/2
ton hydraulic jack does not go high enough to lift the tire off the
ground when I jack under the frame. I would like to jack under the
axle; put a jackstand under the frame, remove the wheel and then
remove the jack from under the axle so the jeep rests on the jackstand
under the frame. Can this potentially damage the axle?
> stilllearning proclaimed:
>
> > The factory manual specifically mentions not place jackstands under
> > the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
> > the issue? The axle seem like an ideal location for lifting the jeep
> > at the front, back or both.
>
> > So, should I place jackstands under the frame only?
>
> The manual shows the jacking points. There is no frame on the Grand.
>
> Or you could put the jacks under the axle on both sides if you want a
> quick way to drop the height an inch or so and don't mind the noise of a
> bent axle.
Why then does the owner's manual mention that the stock jack should be
placed under the axle when changing tires? Could it be that it is OK
to use the axle as a lift point for a short time? I find that my 2 1/2
ton hydraulic jack does not go high enough to lift the tire off the
ground when I jack under the frame. I would like to jack under the
axle; put a jackstand under the frame, remove the wheel and then
remove the jack from under the axle so the jeep rests on the jackstand
under the frame. Can this potentially damage the axle?
05-17-2007, 03:34 PM
#22
Guest
Posts: n/a
Re: Jackstand position under a jeep
stilllearning wrote:
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
05-17-2007, 03:34 PM
#23
Guest
Posts: n/a
Re: Jackstand position under a jeep
stilllearning wrote:
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
05-17-2007, 03:34 PM
#24
Guest
Posts: n/a
Re: Jackstand position under a jeep
stilllearning wrote:
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
05-17-2007, 03:34 PM
#25
Guest
Posts: n/a
Re: Jackstand position under a jeep
stilllearning wrote:
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
> On May 10, 10:25 pm, Lon <lon.stow...@comcast.net> wrote:
>> stilllearning proclaimed:
>>
>>> The factory manual specifically mentions not place jackstands under
>>> the axle tubes of a Jeep Grand Cherokee. Can someone explain what is
>>> the issue? The axle seem like an ideal location for lifting the jeep
>>> at the front, back or both.
>>> So, should I place jackstands under the frame only?
>> The manual shows the jacking points. There is no frame on the Grand.
>>
>> Or you could put the jacks under the axle on both sides if you want a
>> quick way to drop the height an inch or so and don't mind the noise of a
>> bent axle.
>
> Why then does the owner's manual mention that the stock jack should be
> placed under the axle when changing tires? Could it be that it is OK
> to use the axle as a lift point for a short time? I find that my 2 1/2
> ton hydraulic jack does not go high enough to lift the tire off the
> ground when I jack under the frame. I would like to jack under the
> axle; put a jackstand under the frame, remove the wheel and then
> remove the jack from under the axle so the jeep rests on the jackstand
> under the frame. Can this potentially damage the axle?
>
If the owners manual points to a spot on the axle to use, then go for
it. Letting the axle hang on a frame stand (axle stand under the frame)
is how folks change springs and shocks.
Jacking at the end of the tube means the axle stands have to be inboard
of that or it would mean you jack on the center diff and set the stands
outboard which will wreck the poor things.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
Thread
Thread Starter
Forum
Replies
Last Post
Erich
Jeep Mailing List
48
01-30-2006 07:12 AM
=?ISO-8859-1?Q?=22L=2EW=2E=28=DFill=29_Hughes_III=22?=
Jeep Mailing List
0
09-01-2003 04:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)