jack where
05-31-2004, 11:54 AM
#31
Guest
Posts: n/a
Re: jack where
See when wheel,I like to carry my high lift jack because most of the time
it's alot simpler to use to lift a tire to put something under ,most of the
time it's all you need to get unstuck.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BB3465.50C9F4@sympatico.ca...
> I have a small hydraulic floor jack in both of my Jeeps. In my CJ7 if
> fits really nice and solid behind the passenger seat and the Cherokee
> has a pile of room under the back seat where the stock jack is.
>
> This is for tire changes and jacks under the axle. You 'Cannot' safely
> change a tire with a barn lifting jack like a High lift or Jack all.
>
> Then under the passenger seat I carry a wire spool hand winch sometimes
> called a 'Come-A-Long' for moving when the wheels won't.
>
> I have a power winch on front, but carry the manual one anyway. Power
> things break.
>
> Mike
>
> William Oliveri wrote:
> >
> > Ok, Mike. I was considering outfitting my jeep with one of these. You
say
> > save your money. Please give alternatives.
> >
> > Thanks,
> >
> > Bill
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B9FEA5.96887896@sympatico.ca...
> > > I recommend the 'widow maker' be left in the barn where it belongs.
> > >
> > > It does make for a stronger front bumper though, which is likely the
> > > only good use it has anywhere near a Jeep.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Al King wrote:
> > > >
> > > > I installed my high lift jack on my front bumper.I would like to
know
> > where
> > > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > > there or not thanks you guy have always good input on thing that
matter
> > to
> > > > jeeps.
it's alot simpler to use to lift a tire to put something under ,most of the
time it's all you need to get unstuck.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BB3465.50C9F4@sympatico.ca...
> I have a small hydraulic floor jack in both of my Jeeps. In my CJ7 if
> fits really nice and solid behind the passenger seat and the Cherokee
> has a pile of room under the back seat where the stock jack is.
>
> This is for tire changes and jacks under the axle. You 'Cannot' safely
> change a tire with a barn lifting jack like a High lift or Jack all.
>
> Then under the passenger seat I carry a wire spool hand winch sometimes
> called a 'Come-A-Long' for moving when the wheels won't.
>
> I have a power winch on front, but carry the manual one anyway. Power
> things break.
>
> Mike
>
> William Oliveri wrote:
> >
> > Ok, Mike. I was considering outfitting my jeep with one of these. You
say
> > save your money. Please give alternatives.
> >
> > Thanks,
> >
> > Bill
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B9FEA5.96887896@sympatico.ca...
> > > I recommend the 'widow maker' be left in the barn where it belongs.
> > >
> > > It does make for a stronger front bumper though, which is likely the
> > > only good use it has anywhere near a Jeep.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Al King wrote:
> > > >
> > > > I installed my high lift jack on my front bumper.I would like to
know
> > where
> > > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > > there or not thanks you guy have always good input on thing that
matter
> > to
> > > > jeeps.
05-31-2004, 11:54 AM
#32
Guest
Posts: n/a
Re: jack where
See when wheel,I like to carry my high lift jack because most of the time
it's alot simpler to use to lift a tire to put something under ,most of the
time it's all you need to get unstuck.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BB3465.50C9F4@sympatico.ca...
> I have a small hydraulic floor jack in both of my Jeeps. In my CJ7 if
> fits really nice and solid behind the passenger seat and the Cherokee
> has a pile of room under the back seat where the stock jack is.
>
> This is for tire changes and jacks under the axle. You 'Cannot' safely
> change a tire with a barn lifting jack like a High lift or Jack all.
>
> Then under the passenger seat I carry a wire spool hand winch sometimes
> called a 'Come-A-Long' for moving when the wheels won't.
>
> I have a power winch on front, but carry the manual one anyway. Power
> things break.
>
> Mike
>
> William Oliveri wrote:
> >
> > Ok, Mike. I was considering outfitting my jeep with one of these. You
say
> > save your money. Please give alternatives.
> >
> > Thanks,
> >
> > Bill
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B9FEA5.96887896@sympatico.ca...
> > > I recommend the 'widow maker' be left in the barn where it belongs.
> > >
> > > It does make for a stronger front bumper though, which is likely the
> > > only good use it has anywhere near a Jeep.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Al King wrote:
> > > >
> > > > I installed my high lift jack on my front bumper.I would like to
know
> > where
> > > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > > there or not thanks you guy have always good input on thing that
matter
> > to
> > > > jeeps.
it's alot simpler to use to lift a tire to put something under ,most of the
time it's all you need to get unstuck.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BB3465.50C9F4@sympatico.ca...
> I have a small hydraulic floor jack in both of my Jeeps. In my CJ7 if
> fits really nice and solid behind the passenger seat and the Cherokee
> has a pile of room under the back seat where the stock jack is.
>
> This is for tire changes and jacks under the axle. You 'Cannot' safely
> change a tire with a barn lifting jack like a High lift or Jack all.
>
> Then under the passenger seat I carry a wire spool hand winch sometimes
> called a 'Come-A-Long' for moving when the wheels won't.
>
> I have a power winch on front, but carry the manual one anyway. Power
> things break.
>
> Mike
>
> William Oliveri wrote:
> >
> > Ok, Mike. I was considering outfitting my jeep with one of these. You
say
> > save your money. Please give alternatives.
> >
> > Thanks,
> >
> > Bill
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B9FEA5.96887896@sympatico.ca...
> > > I recommend the 'widow maker' be left in the barn where it belongs.
> > >
> > > It does make for a stronger front bumper though, which is likely the
> > > only good use it has anywhere near a Jeep.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Al King wrote:
> > > >
> > > > I installed my high lift jack on my front bumper.I would like to
know
> > where
> > > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > > there or not thanks you guy have always good input on thing that
matter
> > to
> > > > jeeps.
05-31-2004, 11:54 AM
#33
Guest
Posts: n/a
Re: jack where
See when wheel,I like to carry my high lift jack because most of the time
it's alot simpler to use to lift a tire to put something under ,most of the
time it's all you need to get unstuck.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BB3465.50C9F4@sympatico.ca...
> I have a small hydraulic floor jack in both of my Jeeps. In my CJ7 if
> fits really nice and solid behind the passenger seat and the Cherokee
> has a pile of room under the back seat where the stock jack is.
>
> This is for tire changes and jacks under the axle. You 'Cannot' safely
> change a tire with a barn lifting jack like a High lift or Jack all.
>
> Then under the passenger seat I carry a wire spool hand winch sometimes
> called a 'Come-A-Long' for moving when the wheels won't.
>
> I have a power winch on front, but carry the manual one anyway. Power
> things break.
>
> Mike
>
> William Oliveri wrote:
> >
> > Ok, Mike. I was considering outfitting my jeep with one of these. You
say
> > save your money. Please give alternatives.
> >
> > Thanks,
> >
> > Bill
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B9FEA5.96887896@sympatico.ca...
> > > I recommend the 'widow maker' be left in the barn where it belongs.
> > >
> > > It does make for a stronger front bumper though, which is likely the
> > > only good use it has anywhere near a Jeep.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Al King wrote:
> > > >
> > > > I installed my high lift jack on my front bumper.I would like to
know
> > where
> > > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > > there or not thanks you guy have always good input on thing that
matter
> > to
> > > > jeeps.
it's alot simpler to use to lift a tire to put something under ,most of the
time it's all you need to get unstuck.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BB3465.50C9F4@sympatico.ca...
> I have a small hydraulic floor jack in both of my Jeeps. In my CJ7 if
> fits really nice and solid behind the passenger seat and the Cherokee
> has a pile of room under the back seat where the stock jack is.
>
> This is for tire changes and jacks under the axle. You 'Cannot' safely
> change a tire with a barn lifting jack like a High lift or Jack all.
>
> Then under the passenger seat I carry a wire spool hand winch sometimes
> called a 'Come-A-Long' for moving when the wheels won't.
>
> I have a power winch on front, but carry the manual one anyway. Power
> things break.
>
> Mike
>
> William Oliveri wrote:
> >
> > Ok, Mike. I was considering outfitting my jeep with one of these. You
say
> > save your money. Please give alternatives.
> >
> > Thanks,
> >
> > Bill
> >
> > "Mike Romain" <romainm@sympatico.ca> wrote in message
> > news:40B9FEA5.96887896@sympatico.ca...
> > > I recommend the 'widow maker' be left in the barn where it belongs.
> > >
> > > It does make for a stronger front bumper though, which is likely the
> > > only good use it has anywhere near a Jeep.
> > >
> > > Mike
> > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > > 88 Cherokee 235 BFG AT's
> > >
> > > Al King wrote:
> > > >
> > > > I installed my high lift jack on my front bumper.I would like to
know
> > where
> > > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > > there or not thanks you guy have always good input on thing that
matter
> > to
> > > > jeeps.
06-01-2004, 10:08 AM
#34
Guest
Posts: n/a
Re: jack where
Nope, I disagree!
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
06-01-2004, 10:08 AM
#35
Guest
Posts: n/a
Re: jack where
Nope, I disagree!
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
06-01-2004, 10:08 AM
#36
Guest
Posts: n/a
Re: jack where
Nope, I disagree!
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
06-01-2004, 10:08 AM
#37
Guest
Posts: n/a
Re: jack where
Nope, I disagree!
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
I saw a brand new one in use and helped to get something up with it.
That damn new one still tried to take my ear off.
I recently showed a gent who insisted on trying his how fast they come
down. I hit it just at the right click and his 'new' one dropped to
the ground! Taking the jacked up Jeep with it!
They are pure dangerous crap, old or new.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
06-01-2004, 10:09 AM
#38
Guest
Posts: n/a
Re: jack where
Chad, you date is way off on your computer so your posts don't show in
line.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
line.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
06-01-2004, 10:09 AM
#39
Guest
Posts: n/a
Re: jack where
Chad, you date is way off on your computer so your posts don't show in
line.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
line.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
06-01-2004, 10:09 AM
#40
Guest
Posts: n/a
Re: jack where
Chad, you date is way off on your computer so your posts don't show in
line.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >
line.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Chad Fraker wrote:
>
> Just like any tool, it needs to be properly maintained.. Treat yourself and
> your HiLift to a can of white lithium spray lubricant. You can get it
> anywhere.
>
> "Jerry McG" <gmcgeorge.remove@frontier.net> wrote in message
> news:c9dmmi0uva@enews1.newsguy.com...
> > I have an older design Durango rear bumper & tire carrier with an upright
> Hi
> > Lift mount.
> >
> > I'm not sure why I haul this thing around, haven't used it for years. I
> kept
> > the old scissor jack under the hood, which seems to work just fine in
> nearly
> > any circustance, even with 35's.
> >
> > I pulled the old Hi Lift off a few weeks ago to help some folks out on the
> > trail and it was frozen stiff! We had to soak it in WD40 and beat on it
> with
> > a hammer to break it loose. Got a new one and threw the old one into the
> > tool crib, a candidate for the swap meet maybe?
> >
> >
> > "Al King" <alking425REMOVE@THIShotmail.com> wrote in message
> > news:Kcnuc.78149$tb4.2783049@news20.bellglobal.com ...
> > > I installed my high lift jack on my front bumper.I would like to know
> > where
> > > some of you guys put yours and why. It's to help me dicide if it's
> > staying
> > > there or not thanks you guy have always good input on thing that matter
> to
> > > jeeps.
> > >
> > >
> >
> >