Intake manifold removal
01-15-2007, 10:53 AM
#1
Guest
Posts: n/a
Intake manifold removal
I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
I was looking at my rig and could not see how I would remove bolts 4, 2, 1
and 5 on the torque specs next to item number 23 on this web page
http://dailydriventj.com/mfr4.shtml
I could'nt even find those bolts as the intake m aniflod was in the way.
Also besides removing them how the heck are you able to torque them to
spec?
For anyone who has done this how did you remove and torque those 4 bolts?
I was looking at my rig and could not see how I would remove bolts 4, 2, 1
and 5 on the torque specs next to item number 23 on this web page
http://dailydriventj.com/mfr4.shtml
I could'nt even find those bolts as the intake m aniflod was in the way.
Also besides removing them how the heck are you able to torque them to
spec?
For anyone who has done this how did you remove and torque those 4 bolts?
01-15-2007, 11:23 AM
#2
Guest
Posts: n/a
Re: Intake manifold removal
I used a 'wobbler' extension. This has a curved connector to the socket
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
01-15-2007, 11:23 AM
#3
Guest
Posts: n/a
Re: Intake manifold removal
I used a 'wobbler' extension. This has a curved connector to the socket
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
01-15-2007, 11:23 AM
#4
Guest
Posts: n/a
Re: Intake manifold removal
I used a 'wobbler' extension. This has a curved connector to the socket
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
01-15-2007, 11:23 AM
#5
Guest
Posts: n/a
Re: Intake manifold removal
I used a 'wobbler' extension. This has a curved connector to the socket
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
so it can be used on about a 30 degree angle. A normal extension has a
square end something like |____| that. The wobbler is something like
(____) shape.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
01-15-2007, 11:57 AM
#6
Guest
Posts: n/a
Re: Intake manifold removal
Mike Romain wrote:
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
01-15-2007, 11:57 AM
#7
Guest
Posts: n/a
Re: Intake manifold removal
Mike Romain wrote:
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
01-15-2007, 11:57 AM
#8
Guest
Posts: n/a
Re: Intake manifold removal
Mike Romain wrote:
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
01-15-2007, 11:57 AM
#9
Guest
Posts: n/a
Re: Intake manifold removal
Mike Romain wrote:
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
> I used a 'wobbler' extension. This has a curved connector to the socket
> so it can be used on about a 30 degree angle. A normal extension has a
> square end something like |____| that. The wobbler is something like
> (____) shape.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)
>
> ufatbasted wrote:
>> I researching on how to replace my cracked exhasut manifold on my 91yj
>> 4.O
>>
>> I was looking at my rig and could not see how I would remove bolts 4,
>> 2, 1 and 5 on the torque specs next to item number 23 on this web page
>> http://dailydriventj.com/mfr4.shtml
>>
>> I could'nt even find those bolts as the intake m aniflod was in the way.
>> Also besides removing them how the heck are you able to torque them to
>> spec?
>>
>>
>> For anyone who has done this how did you remove and torque those 4 bolts?
>>
>>
>>
So you removed those bolts with the intake manifold on. Did you get them
from the bottom or top?
I must be nuts as I can't even find them all. Going to have to take
another look.
01-15-2007, 12:01 PM
#10
Guest
Posts: n/a
Re: Intake manifold removal
Go to the store and buy every length of extension, univeral joint,
wobbler extension, etc that you can find. You will need them all. You
can get to them, they just need exactly the right combination.
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>
wobbler extension, etc that you can find. You will need them all. You
can get to them, they just need exactly the right combination.
ufatbasted wrote:
> I researching on how to replace my cracked exhasut manifold on my 91yj 4.O
>
> I was looking at my rig and could not see how I would remove bolts 4, 2, 1
> and 5 on the torque specs next to item number 23 on this web page
> http://dailydriventj.com/mfr4.shtml
>
> I could'nt even find those bolts as the intake m aniflod was in the way.
> Also besides removing them how the heck are you able to torque them to
> spec?
>
>
> For anyone who has done this how did you remove and torque those 4 bolts?
>
>
>