|
Re: intake on 304
It turns out that the instructions it says "Remove tin pan from bottom of
stock manifold and reinstall on new manifold with drive pins supplied with kit." My problem is I'm installing on a new motor - I don't have an old manifold or the tin pan. I contacted edelbrock and they suggested I get one made or buy an intake on ebay...I just bought an intake from edelbrock and I can't even use it unless I have an old one to take parts from...it seems they would have mentioned that somewhere in the advertising or on the box. Not happy with edelbrock at the moment ..-- _____________________ HomeBrewer 85CJ7 (in Progress) http://85cj7.blogspot.com/ 99XJ Sport Remove the xxx to reply! "HomeBrewer" <85cj7XXX@cox.net> wrote in message news:2mqcoeFq1eaiU1@uni-berlin.de... > Which gasket should I use on a amc 304 with a edelbrock performer intake? > > Fel-Pro MS96011 - Valley pan gasket - $27 > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21 > Mr Gasket MRG 800G - Standard intake gasket - $13 > > The valley pan gasket says "if your engine requires it"? I don't know if it > requires it or not. > _________ > HomeBrewer > 85CJ7 (in Progress) > http://85cj7.blogspot.com/ > 99XJ Sport > Remove the xxx to reply! > > |
Re: intake on 304
It turns out that the instructions it says "Remove tin pan from bottom of
stock manifold and reinstall on new manifold with drive pins supplied with kit." My problem is I'm installing on a new motor - I don't have an old manifold or the tin pan. I contacted edelbrock and they suggested I get one made or buy an intake on ebay...I just bought an intake from edelbrock and I can't even use it unless I have an old one to take parts from...it seems they would have mentioned that somewhere in the advertising or on the box. Not happy with edelbrock at the moment ..-- _____________________ HomeBrewer 85CJ7 (in Progress) http://85cj7.blogspot.com/ 99XJ Sport Remove the xxx to reply! "HomeBrewer" <85cj7XXX@cox.net> wrote in message news:2mqcoeFq1eaiU1@uni-berlin.de... > Which gasket should I use on a amc 304 with a edelbrock performer intake? > > Fel-Pro MS96011 - Valley pan gasket - $27 > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21 > Mr Gasket MRG 800G - Standard intake gasket - $13 > > The valley pan gasket says "if your engine requires it"? I don't know if it > requires it or not. > _________ > HomeBrewer > 85CJ7 (in Progress) > http://85cj7.blogspot.com/ > 99XJ Sport > Remove the xxx to reply! > > |
Re: intake on 304
It turns out that the instructions it says "Remove tin pan from bottom of
stock manifold and reinstall on new manifold with drive pins supplied with kit." My problem is I'm installing on a new motor - I don't have an old manifold or the tin pan. I contacted edelbrock and they suggested I get one made or buy an intake on ebay...I just bought an intake from edelbrock and I can't even use it unless I have an old one to take parts from...it seems they would have mentioned that somewhere in the advertising or on the box. Not happy with edelbrock at the moment ..-- _____________________ HomeBrewer 85CJ7 (in Progress) http://85cj7.blogspot.com/ 99XJ Sport Remove the xxx to reply! "HomeBrewer" <85cj7XXX@cox.net> wrote in message news:2mqcoeFq1eaiU1@uni-berlin.de... > Which gasket should I use on a amc 304 with a edelbrock performer intake? > > Fel-Pro MS96011 - Valley pan gasket - $27 > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21 > Mr Gasket MRG 800G - Standard intake gasket - $13 > > The valley pan gasket says "if your engine requires it"? I don't know if it > requires it or not. > _________ > HomeBrewer > 85CJ7 (in Progress) > http://85cj7.blogspot.com/ > 99XJ Sport > Remove the xxx to reply! > > |
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover: http://www.competitionwarehouseusa.c...7470eff284bcb0' Or make plates that block your crossover and keep the heat away from you carburetor and oil. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ HomeBrewer wrote: > > It turns out that the instructions it says "Remove tin pan from bottom of > stock manifold and reinstall on new manifold with drive pins supplied with > kit." > > My problem is I'm installing on a new motor - I don't have an old manifold > or the tin pan. I contacted edelbrock and they suggested I get one made or > buy an intake on ebay...I just bought an intake from edelbrock and I can't > even use it unless I have an old one to take parts from...it seems they > would have mentioned that somewhere in the advertising or on the box. Not > happy with edelbrock at the moment > > .-- > _____________________ > HomeBrewer > 85CJ7 (in Progress) > http://85cj7.blogspot.com/ > 99XJ Sport > Remove the xxx to reply! > > "HomeBrewer" <85cj7XXX@cox.net> wrote in message > news:2mqcoeFq1eaiU1@uni-berlin.de... > > Which gasket should I use on a amc 304 with a edelbrock performer intake? > > > > Fel-Pro MS96011 - Valley pan gasket - $27 > > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21 > > Mr Gasket MRG 800G - Standard intake gasket - $13 > > > > The valley pan gasket says "if your engine requires it"? I don't know if > it > > requires it or not. > > _________ > > HomeBrewer > > 85CJ7 (in Progress) > > http://85cj7.blogspot.com/ > > 99XJ Sport > > Remove the xxx to reply! > > > > |
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover: http://www.competitionwarehouseusa.c...7470eff284bcb0' Or make plates that block your crossover and keep the heat away from you carburetor and oil. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ HomeBrewer wrote: > > It turns out that the instructions it says "Remove tin pan from bottom of > stock manifold and reinstall on new manifold with drive pins supplied with > kit." > > My problem is I'm installing on a new motor - I don't have an old manifold > or the tin pan. I contacted edelbrock and they suggested I get one made or > buy an intake on ebay...I just bought an intake from edelbrock and I can't > even use it unless I have an old one to take parts from...it seems they > would have mentioned that somewhere in the advertising or on the box. Not > happy with edelbrock at the moment > > .-- > _____________________ > HomeBrewer > 85CJ7 (in Progress) > http://85cj7.blogspot.com/ > 99XJ Sport > Remove the xxx to reply! > > "HomeBrewer" <85cj7XXX@cox.net> wrote in message > news:2mqcoeFq1eaiU1@uni-berlin.de... > > Which gasket should I use on a amc 304 with a edelbrock performer intake? > > > > Fel-Pro MS96011 - Valley pan gasket - $27 > > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21 > > Mr Gasket MRG 800G - Standard intake gasket - $13 > > > > The valley pan gasket says "if your engine requires it"? I don't know if > it > > requires it or not. > > _________ > > HomeBrewer > > 85CJ7 (in Progress) > > http://85cj7.blogspot.com/ > > 99XJ Sport > > Remove the xxx to reply! > > > > |
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover: http://www.competitionwarehouseusa.c...7470eff284bcb0' Or make plates that block your crossover and keep the heat away from you carburetor and oil. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ HomeBrewer wrote: > > It turns out that the instructions it says "Remove tin pan from bottom of > stock manifold and reinstall on new manifold with drive pins supplied with > kit." > > My problem is I'm installing on a new motor - I don't have an old manifold > or the tin pan. I contacted edelbrock and they suggested I get one made or > buy an intake on ebay...I just bought an intake from edelbrock and I can't > even use it unless I have an old one to take parts from...it seems they > would have mentioned that somewhere in the advertising or on the box. Not > happy with edelbrock at the moment > > .-- > _____________________ > HomeBrewer > 85CJ7 (in Progress) > http://85cj7.blogspot.com/ > 99XJ Sport > Remove the xxx to reply! > > "HomeBrewer" <85cj7XXX@cox.net> wrote in message > news:2mqcoeFq1eaiU1@uni-berlin.de... > > Which gasket should I use on a amc 304 with a edelbrock performer intake? > > > > Fel-Pro MS96011 - Valley pan gasket - $27 > > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21 > > Mr Gasket MRG 800G - Standard intake gasket - $13 > > > > The valley pan gasket says "if your engine requires it"? I don't know if > it > > requires it or not. > > _________ > > HomeBrewer > > 85CJ7 (in Progress) > > http://85cj7.blogspot.com/ > > 99XJ Sport > > Remove the xxx to reply! > > > > |
Re: intake on 304
Seeing your not going to use the EGR valve, why don't you see if
you may trade it for a manifold without the crossover: http://www.competitionwarehouseusa.c...7470eff284bcb0' Or make plates that block your crossover and keep the heat away from you carburetor and oil. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ HomeBrewer wrote: > > It turns out that the instructions it says "Remove tin pan from bottom of > stock manifold and reinstall on new manifold with drive pins supplied with > kit." > > My problem is I'm installing on a new motor - I don't have an old manifold > or the tin pan. I contacted edelbrock and they suggested I get one made or > buy an intake on ebay...I just bought an intake from edelbrock and I can't > even use it unless I have an old one to take parts from...it seems they > would have mentioned that somewhere in the advertising or on the box. Not > happy with edelbrock at the moment > > .-- > _____________________ > HomeBrewer > 85CJ7 (in Progress) > http://85cj7.blogspot.com/ > 99XJ Sport > Remove the xxx to reply! > > "HomeBrewer" <85cj7XXX@cox.net> wrote in message > news:2mqcoeFq1eaiU1@uni-berlin.de... > > Which gasket should I use on a amc 304 with a edelbrock performer intake? > > > > Fel-Pro MS96011 - Valley pan gasket - $27 > > Mr Gasket MRG-5844 - Ultra-Seal intake manifold - $21 > > Mr Gasket MRG 800G - Standard intake gasket - $13 > > > > The valley pan gasket says "if your engine requires it"? I don't know if > it > > requires it or not. > > _________ > > HomeBrewer > > 85CJ7 (in Progress) > > http://85cj7.blogspot.com/ > > 99XJ Sport > > Remove the xxx to reply! > > > > |
| All times are GMT -4. The time now is 02:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands