Installing Kilby Gas Tank Skid in '01 TJ
10-02-2003, 11:32 AM
#11
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
I realize you have already purchased so this is a moot point for
you... but for anyone else considering TJ armor... the Tomken skid
plate bolts on over the existing armor with no need to move fuel lines
or anything else, and is extremely heavy duty. I have been extremely
pleased with mine.
you... but for anyone else considering TJ armor... the Tomken skid
plate bolts on over the existing armor with no need to move fuel lines
or anything else, and is extremely heavy duty. I have been extremely
pleased with mine.
10-02-2003, 11:48 AM
#12
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
The Tomken is a solid skid plate. I have one myself and regularly bash it
on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
plate, however, replaces the stock "plate" and raises the gas tank about 1"
(I *think* it's 1"). Both these make for better clearance in the back and
help get rid of that "loaded diaper" look. :-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Joshua Nelson" <spam_box@ev1.net> wrote in message
news:b102b6e4.0310020732.8efbd25@posting.google.co m...
> I realize you have already purchased so this is a moot point for
> you... but for anyone else considering TJ armor... the Tomken skid
> plate bolts on over the existing armor with no need to move fuel lines
> or anything else, and is extremely heavy duty. I have been extremely
> pleased with mine.
on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
plate, however, replaces the stock "plate" and raises the gas tank about 1"
(I *think* it's 1"). Both these make for better clearance in the back and
help get rid of that "loaded diaper" look. :-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Joshua Nelson" <spam_box@ev1.net> wrote in message
news:b102b6e4.0310020732.8efbd25@posting.google.co m...
> I realize you have already purchased so this is a moot point for
> you... but for anyone else considering TJ armor... the Tomken skid
> plate bolts on over the existing armor with no need to move fuel lines
> or anything else, and is extremely heavy duty. I have been extremely
> pleased with mine.
10-02-2003, 11:48 AM
#13
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
The Tomken is a solid skid plate. I have one myself and regularly bash it
on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
plate, however, replaces the stock "plate" and raises the gas tank about 1"
(I *think* it's 1"). Both these make for better clearance in the back and
help get rid of that "loaded diaper" look. :-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Joshua Nelson" <spam_box@ev1.net> wrote in message
news:b102b6e4.0310020732.8efbd25@posting.google.co m...
> I realize you have already purchased so this is a moot point for
> you... but for anyone else considering TJ armor... the Tomken skid
> plate bolts on over the existing armor with no need to move fuel lines
> or anything else, and is extremely heavy duty. I have been extremely
> pleased with mine.
on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
plate, however, replaces the stock "plate" and raises the gas tank about 1"
(I *think* it's 1"). Both these make for better clearance in the back and
help get rid of that "loaded diaper" look. :-)
--
Jim
98 TJ SE
90 SJ GW
http://www.delawareja.com/gallery/JDJeep98
"Joshua Nelson" <spam_box@ev1.net> wrote in message
news:b102b6e4.0310020732.8efbd25@posting.google.co m...
> I realize you have already purchased so this is a moot point for
> you... but for anyone else considering TJ armor... the Tomken skid
> plate bolts on over the existing armor with no need to move fuel lines
> or anything else, and is extremely heavy duty. I have been extremely
> pleased with mine.
10-02-2003, 01:13 PM
#14
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
No "loaded diaper" here, just a bare rear end:
http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
wouldn't understand.
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> The Tomken is a solid skid plate. I have one myself and regularly bash it
> on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
> plate, however, replaces the stock "plate" and raises the gas tank about 1"
> (I *think* it's 1"). Both these make for better clearance in the back and
> help get rid of that "loaded diaper" look. :-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
wouldn't understand.
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> The Tomken is a solid skid plate. I have one myself and regularly bash it
> on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
> plate, however, replaces the stock "plate" and raises the gas tank about 1"
> (I *think* it's 1"). Both these make for better clearance in the back and
> help get rid of that "loaded diaper" look. :-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
10-02-2003, 01:13 PM
#15
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
No "loaded diaper" here, just a bare rear end:
http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
wouldn't understand.
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> The Tomken is a solid skid plate. I have one myself and regularly bash it
> on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
> plate, however, replaces the stock "plate" and raises the gas tank about 1"
> (I *think* it's 1"). Both these make for better clearance in the back and
> help get rid of that "loaded diaper" look. :-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
wouldn't understand.
God Bless America, ßill O|||||||O
mailto:--------------------
TJim wrote:
>
> The Tomken is a solid skid plate. I have one myself and regularly bash it
> on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
> plate, however, replaces the stock "plate" and raises the gas tank about 1"
> (I *think* it's 1"). Both these make for better clearance in the back and
> help get rid of that "loaded diaper" look. :-)
>
> --
> Jim
> 98 TJ SE
> 90 SJ GW
> http://www.delawareja.com/gallery/JDJeep98
10-02-2003, 01:49 PM
#16
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
In article <3F7C5CA4.8B5E1675@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>No "loaded diaper" here, just a bare rear end:
>http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
>wouldn't understand.
Bill would rather have the fuel under his ***, one good meal with cabbage and
caulifower and he's airborne...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
III <----------@***.net> writes:
>No "loaded diaper" here, just a bare rear end:
>http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
>wouldn't understand.
Bill would rather have the fuel under his ***, one good meal with cabbage and
caulifower and he's airborne...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-02-2003, 01:49 PM
#17
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
In article <3F7C5CA4.8B5E1675@***.net>, L.W.(=?iso-8859-1?Q?=DFill?=) ------
III <----------@***.net> writes:
>No "loaded diaper" here, just a bare rear end:
>http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
>wouldn't understand.
Bill would rather have the fuel under his ***, one good meal with cabbage and
caulifower and he's airborne...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
III <----------@***.net> writes:
>No "loaded diaper" here, just a bare rear end:
>http://www.----------.com/46jeep.jpg That's a Real Jeep thing, TJs
>wouldn't understand.
Bill would rather have the fuel under his ***, one good meal with cabbage and
caulifower and he's airborne...
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-02-2003, 01:52 PM
#18
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
In article <mficnV7IfsNI1eGiU-KYjQ@comcast.com>, "TJim" <jim@ranlet.nospam.com>
writes:
>The Tomken is a solid skid plate. I have one myself and regularly bash it
>on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
>plate, however, replaces the stock "plate" and raises the gas tank about 1"
>(I *think* it's 1"). Both these make for better clearance in the back and
>help get rid of that "loaded diaper" look. :-)
Yep, it raises it 1" and is stout enough to support the weight of the vehicle.
The fellow I mentioned where we had to remove his bumper, IIRC he was replacing
a Tomken skidplate.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>The Tomken is a solid skid plate. I have one myself and regularly bash it
>on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
>plate, however, replaces the stock "plate" and raises the gas tank about 1"
>(I *think* it's 1"). Both these make for better clearance in the back and
>help get rid of that "loaded diaper" look. :-)
Yep, it raises it 1" and is stout enough to support the weight of the vehicle.
The fellow I mentioned where we had to remove his bumper, IIRC he was replacing
a Tomken skidplate.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-02-2003, 01:52 PM
#19
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
In article <mficnV7IfsNI1eGiU-KYjQ@comcast.com>, "TJim" <jim@ranlet.nospam.com>
writes:
>The Tomken is a solid skid plate. I have one myself and regularly bash it
>on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
>plate, however, replaces the stock "plate" and raises the gas tank about 1"
>(I *think* it's 1"). Both these make for better clearance in the back and
>help get rid of that "loaded diaper" look. :-)
Yep, it raises it 1" and is stout enough to support the weight of the vehicle.
The fellow I mentioned where we had to remove his bumper, IIRC he was replacing
a Tomken skidplate.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
writes:
>The Tomken is a solid skid plate. I have one myself and regularly bash it
>on rocks just to test it (I only have a 2" lift and 31s). The Kilby skid
>plate, however, replaces the stock "plate" and raises the gas tank about 1"
>(I *think* it's 1"). Both these make for better clearance in the back and
>help get rid of that "loaded diaper" look. :-)
Yep, it raises it 1" and is stout enough to support the weight of the vehicle.
The fellow I mentioned where we had to remove his bumper, IIRC he was replacing
a Tomken skidplate.
* * *
Matt Macchiarolo
www.townpeddler.com
www.wolverine4wd.org
http://wolverine4wd.org/rigs/macchiarolo_ml.html
10-02-2003, 02:18 PM
#20
Guest
Posts: n/a
Re: Installing Kilby Gas Tank Skid in '01 TJ
I've been on fire countless times, that's what they make fire
extinguishers for. I should vent the tank, rather than have the fuel run
out the cap on to my exhaust, but then what's life without a little
excitement.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Bill would rather have the fuel under his ***, one good meal with cabbage and
> caulifower and he's airborne...
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html
extinguishers for. I should vent the tank, rather than have the fuel run
out the cap on to my exhaust, but then what's life without a little
excitement.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
Matt Macchiarolo wrote:
>
> Bill would rather have the fuel under his ***, one good meal with cabbage and
> caulifower and he's airborne...
> * * *
> Matt Macchiarolo
> www.townpeddler.com
> www.wolverine4wd.org
> http://wolverine4wd.org/rigs/macchiarolo_ml.html