Ignorant question.
01-13-2005, 09:24 PM
#1
Guest
Posts: n/a
Ignorant question.
Today I finally managed to start Project Jeep Deere for the first time
in several years of building/therapy. The CJ-7 has a new MPFI kit and a
new exhaust. My question is this:
The new down pipe from the exhaust manifold to the cat has a small 1",
or so, tube sticking up a few inches back from the manifold. What is it
for?
It's been too long since I started the build and I am too excited to
crack a book to figure it out. So my post is two-fold 1)I get a question
answered and 2) I get to toot my own horn about my first vehicle build.
Thanks for helping! Really, this group, and it's denizens, has been a
great source of info and support!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
in several years of building/therapy. The CJ-7 has a new MPFI kit and a
new exhaust. My question is this:
The new down pipe from the exhaust manifold to the cat has a small 1",
or so, tube sticking up a few inches back from the manifold. What is it
for?
It's been too long since I started the build and I am too excited to
crack a book to figure it out. So my post is two-fold 1)I get a question
answered and 2) I get to toot my own horn about my first vehicle build.
Thanks for helping! Really, this group, and it's denizens, has been a
great source of info and support!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 09:34 PM
#2
Guest
Posts: n/a
Re: Ignorant question.
Possibly to pre-heat the air going to the air filter?
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Jeepers" wrote in message ...
> Today I finally managed to start Project Jeep Deere for the first time
> in several years of building/therapy. The CJ-7 has a new MPFI kit and a
> new exhaust. My question is this:
>
> The new down pipe from the exhaust manifold to the cat has a small 1",
> or so, tube sticking up a few inches back from the manifold. What is it
> for?
>
> It's been too long since I started the build and I am too excited to
> crack a book to figure it out. So my post is two-fold 1)I get a question
> answered and 2) I get to toot my own horn about my first vehicle build.
>
> Thanks for helping! Really, this group, and it's denizens, has been a
> great source of info and support!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Jeepers" wrote in message ...
> Today I finally managed to start Project Jeep Deere for the first time
> in several years of building/therapy. The CJ-7 has a new MPFI kit and a
> new exhaust. My question is this:
>
> The new down pipe from the exhaust manifold to the cat has a small 1",
> or so, tube sticking up a few inches back from the manifold. What is it
> for?
>
> It's been too long since I started the build and I am too excited to
> crack a book to figure it out. So my post is two-fold 1)I get a question
> answered and 2) I get to toot my own horn about my first vehicle build.
>
> Thanks for helping! Really, this group, and it's denizens, has been a
> great source of info and support!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 09:34 PM
#3
Guest
Posts: n/a
Re: Ignorant question.
Possibly to pre-heat the air going to the air filter?
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Jeepers" wrote in message ...
> Today I finally managed to start Project Jeep Deere for the first time
> in several years of building/therapy. The CJ-7 has a new MPFI kit and a
> new exhaust. My question is this:
>
> The new down pipe from the exhaust manifold to the cat has a small 1",
> or so, tube sticking up a few inches back from the manifold. What is it
> for?
>
> It's been too long since I started the build and I am too excited to
> crack a book to figure it out. So my post is two-fold 1)I get a question
> answered and 2) I get to toot my own horn about my first vehicle build.
>
> Thanks for helping! Really, this group, and it's denizens, has been a
> great source of info and support!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Jeepers" wrote in message ...
> Today I finally managed to start Project Jeep Deere for the first time
> in several years of building/therapy. The CJ-7 has a new MPFI kit and a
> new exhaust. My question is this:
>
> The new down pipe from the exhaust manifold to the cat has a small 1",
> or so, tube sticking up a few inches back from the manifold. What is it
> for?
>
> It's been too long since I started the build and I am too excited to
> crack a book to figure it out. So my post is two-fold 1)I get a question
> answered and 2) I get to toot my own horn about my first vehicle build.
>
> Thanks for helping! Really, this group, and it's denizens, has been a
> great source of info and support!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 09:34 PM
#4
Guest
Posts: n/a
Re: Ignorant question.
Possibly to pre-heat the air going to the air filter?
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Jeepers" wrote in message ...
> Today I finally managed to start Project Jeep Deere for the first time
> in several years of building/therapy. The CJ-7 has a new MPFI kit and a
> new exhaust. My question is this:
>
> The new down pipe from the exhaust manifold to the cat has a small 1",
> or so, tube sticking up a few inches back from the manifold. What is it
> for?
>
> It's been too long since I started the build and I am too excited to
> crack a book to figure it out. So my post is two-fold 1)I get a question
> answered and 2) I get to toot my own horn about my first vehicle build.
>
> Thanks for helping! Really, this group, and it's denizens, has been a
> great source of info and support!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
"Jeepers" wrote in message ...
> Today I finally managed to start Project Jeep Deere for the first time
> in several years of building/therapy. The CJ-7 has a new MPFI kit and a
> new exhaust. My question is this:
>
> The new down pipe from the exhaust manifold to the cat has a small 1",
> or so, tube sticking up a few inches back from the manifold. What is it
> for?
>
> It's been too long since I started the build and I am too excited to
> crack a book to figure it out. So my post is two-fold 1)I get a question
> answered and 2) I get to toot my own horn about my first vehicle build.
>
> Thanks for helping! Really, this group, and it's denizens, has been a
> great source of info and support!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 09:40 PM
#5
Guest
Posts: n/a
Re: Ignorant question.
In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
"JimG" <jimg@2muchspam.com> wrote:
> Possibly to pre-heat the air going to the air filter?
Possibly. I just don't recall. Right now all I know is there Nuthin'
like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
Now that I know that I didn't leave a rag in the cylinder head or mice
didn't move into the manifold, I can move on to re-assembly of the body.
Hopefully I can get that done before my 11 y.o. graduates!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
"JimG" <jimg@2muchspam.com> wrote:
> Possibly to pre-heat the air going to the air filter?
Possibly. I just don't recall. Right now all I know is there Nuthin'
like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
Now that I know that I didn't leave a rag in the cylinder head or mice
didn't move into the manifold, I can move on to re-assembly of the body.
Hopefully I can get that done before my 11 y.o. graduates!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 09:40 PM
#6
Guest
Posts: n/a
Re: Ignorant question.
In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
"JimG" <jimg@2muchspam.com> wrote:
> Possibly to pre-heat the air going to the air filter?
Possibly. I just don't recall. Right now all I know is there Nuthin'
like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
Now that I know that I didn't leave a rag in the cylinder head or mice
didn't move into the manifold, I can move on to re-assembly of the body.
Hopefully I can get that done before my 11 y.o. graduates!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
"JimG" <jimg@2muchspam.com> wrote:
> Possibly to pre-heat the air going to the air filter?
Possibly. I just don't recall. Right now all I know is there Nuthin'
like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
Now that I know that I didn't leave a rag in the cylinder head or mice
didn't move into the manifold, I can move on to re-assembly of the body.
Hopefully I can get that done before my 11 y.o. graduates!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 09:40 PM
#7
Guest
Posts: n/a
Re: Ignorant question.
In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
"JimG" <jimg@2muchspam.com> wrote:
> Possibly to pre-heat the air going to the air filter?
Possibly. I just don't recall. Right now all I know is there Nuthin'
like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
Now that I know that I didn't leave a rag in the cylinder head or mice
didn't move into the manifold, I can move on to re-assembly of the body.
Hopefully I can get that done before my 11 y.o. graduates!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
"JimG" <jimg@2muchspam.com> wrote:
> Possibly to pre-heat the air going to the air filter?
Possibly. I just don't recall. Right now all I know is there Nuthin'
like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
Now that I know that I didn't leave a rag in the cylinder head or mice
didn't move into the manifold, I can move on to re-assembly of the body.
Hopefully I can get that done before my 11 y.o. graduates!
--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 10:58 PM
#8
Guest
Posts: n/a
Re: Ignorant question.
I had one on My toyota Tercel with Throttle Body Injected carb, It was to
heat up the Engine or the carb. If you had a carb before and switch to EFI i
guess you dont need it anymore, and you can probabbly use a plomber
accessory to block it.?? !!
did you buy the original replacement ?
"Jeepers" <moomesa@INVALIDfnbnet.net> a écrit dans le message de news:
moomesa-DD34C6.20400213012005@news-east.newsfeeds.com...
> In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
> "JimG" <jimg@2muchspam.com> wrote:
>
>> Possibly to pre-heat the air going to the air filter?
>
> Possibly. I just don't recall. Right now all I know is there Nuthin'
> like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
>
> Now that I know that I didn't leave a rag in the cylinder head or mice
> didn't move into the manifold, I can move on to re-assembly of the body.
> Hopefully I can get that done before my 11 y.o. graduates!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
heat up the Engine or the carb. If you had a carb before and switch to EFI i
guess you dont need it anymore, and you can probabbly use a plomber
accessory to block it.?? !!
did you buy the original replacement ?
"Jeepers" <moomesa@INVALIDfnbnet.net> a écrit dans le message de news:
moomesa-DD34C6.20400213012005@news-east.newsfeeds.com...
> In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
> "JimG" <jimg@2muchspam.com> wrote:
>
>> Possibly to pre-heat the air going to the air filter?
>
> Possibly. I just don't recall. Right now all I know is there Nuthin'
> like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
>
> Now that I know that I didn't leave a rag in the cylinder head or mice
> didn't move into the manifold, I can move on to re-assembly of the body.
> Hopefully I can get that done before my 11 y.o. graduates!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 10:58 PM
#9
Guest
Posts: n/a
Re: Ignorant question.
I had one on My toyota Tercel with Throttle Body Injected carb, It was to
heat up the Engine or the carb. If you had a carb before and switch to EFI i
guess you dont need it anymore, and you can probabbly use a plomber
accessory to block it.?? !!
did you buy the original replacement ?
"Jeepers" <moomesa@INVALIDfnbnet.net> a écrit dans le message de news:
moomesa-DD34C6.20400213012005@news-east.newsfeeds.com...
> In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
> "JimG" <jimg@2muchspam.com> wrote:
>
>> Possibly to pre-heat the air going to the air filter?
>
> Possibly. I just don't recall. Right now all I know is there Nuthin'
> like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
>
> Now that I know that I didn't leave a rag in the cylinder head or mice
> didn't move into the manifold, I can move on to re-assembly of the body.
> Hopefully I can get that done before my 11 y.o. graduates!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
heat up the Engine or the carb. If you had a carb before and switch to EFI i
guess you dont need it anymore, and you can probabbly use a plomber
accessory to block it.?? !!
did you buy the original replacement ?
"Jeepers" <moomesa@INVALIDfnbnet.net> a écrit dans le message de news:
moomesa-DD34C6.20400213012005@news-east.newsfeeds.com...
> In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
> "JimG" <jimg@2muchspam.com> wrote:
>
>> Possibly to pre-heat the air going to the air filter?
>
> Possibly. I just don't recall. Right now all I know is there Nuthin'
> like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
>
> Now that I know that I didn't leave a rag in the cylinder head or mice
> didn't move into the manifold, I can move on to re-assembly of the body.
> Hopefully I can get that done before my 11 y.o. graduates!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
01-13-2005, 10:58 PM
#10
Guest
Posts: n/a
Re: Ignorant question.
I had one on My toyota Tercel with Throttle Body Injected carb, It was to
heat up the Engine or the carb. If you had a carb before and switch to EFI i
guess you dont need it anymore, and you can probabbly use a plomber
accessory to block it.?? !!
did you buy the original replacement ?
"Jeepers" <moomesa@INVALIDfnbnet.net> a écrit dans le message de news:
moomesa-DD34C6.20400213012005@news-east.newsfeeds.com...
> In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
> "JimG" <jimg@2muchspam.com> wrote:
>
>> Possibly to pre-heat the air going to the air filter?
>
> Possibly. I just don't recall. Right now all I know is there Nuthin'
> like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
>
> Now that I know that I didn't leave a rag in the cylinder head or mice
> didn't move into the manifold, I can move on to re-assembly of the body.
> Hopefully I can get that done before my 11 y.o. graduates!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
heat up the Engine or the carb. If you had a carb before and switch to EFI i
guess you dont need it anymore, and you can probabbly use a plomber
accessory to block it.?? !!
did you buy the original replacement ?
"Jeepers" <moomesa@INVALIDfnbnet.net> a écrit dans le message de news:
moomesa-DD34C6.20400213012005@news-east.newsfeeds.com...
> In article <_cGFd.3896$2M4.3314@news01.roc.ny>,
> "JimG" <jimg@2muchspam.com> wrote:
>
>> Possibly to pre-heat the air going to the air filter?
>
> Possibly. I just don't recall. Right now all I know is there Nuthin'
> like the smell of stickers burning off a new exhaust pipe! Woo-Hoo!
>
> Now that I know that I didn't leave a rag in the cylinder head or mice
> didn't move into the manifold, I can move on to re-assembly of the body.
> Hopefully I can get that done before my 11 y.o. graduates!
>
> --
> Member AAAAAAAA
> American Association Against Acronym Abuse And Also Ambiguity.
