Why would you think that instead of the obvious loose switch?

His heater works and if he moves the key off the detente he has
accessories so the fuses are fine...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

mic canic wrote:
>
> the heater blower switch is melted and so is the ing. switch wiring and you
> have a couple blown fuses
>
> TF wrote:
>
> > Hello,
> > Any thoughts on 95 Cherokee turn key starts fine but there is no power for
> > the accesories like blower, wipers, radio.
> > Have to move key slightly back or retry cycle to get them to work.
> > Can I shoot anything in the key slot? or do I need to replace/ take apart
> > etc.
> >
> > Thanks
> > Tom

 

Why would you think that instead of the obvious loose switch?

His heater works and if he moves the key off the detente he has
accessories so the fuses are fine...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

mic canic wrote:
>
> the heater blower switch is melted and so is the ing. switch wiring and you
> have a couple blown fuses
>
> TF wrote:
>
> > Hello,
> > Any thoughts on 95 Cherokee turn key starts fine but there is no power for
> > the accesories like blower, wipers, radio.
> > Have to move key slightly back or retry cycle to get them to work.
> > Can I shoot anything in the key slot? or do I need to replace/ take apart
> > etc.
> >
> > Thanks
> > Tom

 

Why would you think that instead of the obvious loose switch?

His heater works and if he moves the key off the detente he has
accessories so the fuses are fine...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

mic canic wrote:
>
> the heater blower switch is melted and so is the ing. switch wiring and you
> have a couple blown fuses
>
> TF wrote:
>
> > Hello,
> > Any thoughts on 95 Cherokee turn key starts fine but there is no power for
> > the accesories like blower, wipers, radio.
> > Have to move key slightly back or retry cycle to get them to work.
> > Can I shoot anything in the key slot? or do I need to replace/ take apart
> > etc.
> >
> > Thanks
> > Tom

 

i have repaired at least 40 jeeps for this issue and it all starts with the heater
quit working

Mike Romain wrote:

> Why would you think that instead of the obvious loose switch?
>
> His heater works and if he moves the key off the detente he has
> accessories so the fuses are fine...
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> mic canic wrote:
> >
> > the heater blower switch is melted and so is the ing. switch wiring and you
> > have a couple blown fuses
> >
> > TF wrote:
> >
> > > Hello,
> > > Any thoughts on 95 Cherokee turn key starts fine but there is no power for
> > > the accesories like blower, wipers, radio.
> > > Have to move key slightly back or retry cycle to get them to work.
> > > Can I shoot anything in the key slot? or do I need to replace/ take apart
> > > etc.
> > >
> > > Thanks
> > > Tom

 

i have repaired at least 40 jeeps for this issue and it all starts with the heater
quit working

Mike Romain wrote:

> Why would you think that instead of the obvious loose switch?
>
> His heater works and if he moves the key off the detente he has
> accessories so the fuses are fine...
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> mic canic wrote:
> >
> > the heater blower switch is melted and so is the ing. switch wiring and you
> > have a couple blown fuses
> >
> > TF wrote:
> >
> > > Hello,
> > > Any thoughts on 95 Cherokee turn key starts fine but there is no power for
> > > the accesories like blower, wipers, radio.
> > > Have to move key slightly back or retry cycle to get them to work.
> > > Can I shoot anything in the key slot? or do I need to replace/ take apart
> > > etc.
> > >
> > > Thanks
> > > Tom

 

i have repaired at least 40 jeeps for this issue and it all starts with the heater
quit working

Mike Romain wrote:

> Why would you think that instead of the obvious loose switch?
>
> His heater works and if he moves the key off the detente he has
> accessories so the fuses are fine...
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> mic canic wrote:
> >
> > the heater blower switch is melted and so is the ing. switch wiring and you
> > have a couple blown fuses
> >
> > TF wrote:
> >
> > > Hello,
> > > Any thoughts on 95 Cherokee turn key starts fine but there is no power for
> > > the accesories like blower, wipers, radio.
> > > Have to move key slightly back or retry cycle to get them to work.
> > > Can I shoot anything in the key slot? or do I need to replace/ take apart
> > > etc.
> > >
> > > Thanks
> > > Tom

 

Thanks for the replies I will check the 'shaft' from key switch & ignition
as emailed. Yes heater works no blown fuses. Just waiting for temp above
damn 0 to look at. Will let all know

Thanks
Tom
"mic canic" <dbrider@cac.net> wrote in message
news:41F3A931.5206382D@cac.net...
>i have repaired at least 40 jeeps for this issue and it all starts with the
>heater
> quit working
>
> Mike Romain wrote:
>
>> Why would you think that instead of the obvious loose switch?
>>
>> His heater works and if he moves the key off the detente he has
>> accessories so the fuses are fine...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> mic canic wrote:
>> >
>> > the heater blower switch is melted and so is the ing. switch wiring and
>> > you
>> > have a couple blown fuses
>> >
>> > TF wrote:
>> >
>> > > Hello,
>> > > Any thoughts on 95 Cherokee turn key starts fine but there is no
>> > > power for
>> > > the accesories like blower, wipers, radio.
>> > > Have to move key slightly back or retry cycle to get them to work.
>> > > Can I shoot anything in the key slot? or do I need to replace/ take
>> > > apart
>> > > etc.
>> > >
>> > > Thanks
>> > > Tom
>

 

Thanks for the replies I will check the 'shaft' from key switch & ignition
as emailed. Yes heater works no blown fuses. Just waiting for temp above
damn 0 to look at. Will let all know

Thanks
Tom
"mic canic" <dbrider@cac.net> wrote in message
news:41F3A931.5206382D@cac.net...
>i have repaired at least 40 jeeps for this issue and it all starts with the
>heater
> quit working
>
> Mike Romain wrote:
>
>> Why would you think that instead of the obvious loose switch?
>>
>> His heater works and if he moves the key off the detente he has
>> accessories so the fuses are fine...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> mic canic wrote:
>> >
>> > the heater blower switch is melted and so is the ing. switch wiring and
>> > you
>> > have a couple blown fuses
>> >
>> > TF wrote:
>> >
>> > > Hello,
>> > > Any thoughts on 95 Cherokee turn key starts fine but there is no
>> > > power for
>> > > the accesories like blower, wipers, radio.
>> > > Have to move key slightly back or retry cycle to get them to work.
>> > > Can I shoot anything in the key slot? or do I need to replace/ take
>> > > apart
>> > > etc.
>> > >
>> > > Thanks
>> > > Tom
>

 

Thanks for the replies I will check the 'shaft' from key switch & ignition
as emailed. Yes heater works no blown fuses. Just waiting for temp above
damn 0 to look at. Will let all know

Thanks
Tom
"mic canic" <dbrider@cac.net> wrote in message
news:41F3A931.5206382D@cac.net...
>i have repaired at least 40 jeeps for this issue and it all starts with the
>heater
> quit working
>
> Mike Romain wrote:
>
>> Why would you think that instead of the obvious loose switch?
>>
>> His heater works and if he moves the key off the detente he has
>> accessories so the fuses are fine...
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>>
>> mic canic wrote:
>> >
>> > the heater blower switch is melted and so is the ing. switch wiring and
>> > you
>> > have a couple blown fuses
>> >
>> > TF wrote:
>> >
>> > > Hello,
>> > > Any thoughts on 95 Cherokee turn key starts fine but there is no
>> > > power for
>> > > the accesories like blower, wipers, radio.
>> > > Have to move key slightly back or retry cycle to get them to work.
>> > > Can I shoot anything in the key slot? or do I need to replace/ take
>> > > apart
>> > > etc.
>> > >
>> > > Thanks
>> > > Tom
>