Identifying your 4.2L engine
02-21-2004, 05:23 PM
#1
Guest
Posts: n/a
Identifying your 4.2L engine
Ok, this is what I found out in case anyone is interested.
There are two main codes on a block that can help identify a 4.2L engine
1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
block just below and between #3 and #2 spark plugs holes. It's a flat plate
and has this format:
The Engine Day Build Code consists of six characters:
1. Year built code
2 & 3. Number of the month
4. Engine size/type code
5 & 6. Day built
Mine is 012C05
Which comes out to:
0=1980 or 1990
12=Dec
C=2v carb
05=day of the month built
See this site for more info:
http://home.att.net/~farna/amtech/amcengcodes.htm
I was unclear on whether this would be a 1980 or 1990 engine. To narrow
it down I located the Engine Serial number (2nd main code) which is located
right behind the O2 Sensor on the Drivers side of the block.
Mine reads: EF3235444
When I looked for this number on remanufactured engine sites I see that
this block serial number started in 1981 through 1990.
Therefore the best determination I can make is this engine is a 1990 made
engine.
Hope this helps someone.
Bill
There are two main codes on a block that can help identify a 4.2L engine
1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
block just below and between #3 and #2 spark plugs holes. It's a flat plate
and has this format:
The Engine Day Build Code consists of six characters:
1. Year built code
2 & 3. Number of the month
4. Engine size/type code
5 & 6. Day built
Mine is 012C05
Which comes out to:
0=1980 or 1990
12=Dec
C=2v carb
05=day of the month built
See this site for more info:
http://home.att.net/~farna/amtech/amcengcodes.htm
I was unclear on whether this would be a 1980 or 1990 engine. To narrow
it down I located the Engine Serial number (2nd main code) which is located
right behind the O2 Sensor on the Drivers side of the block.
Mine reads: EF3235444
When I looked for this number on remanufactured engine sites I see that
this block serial number started in 1981 through 1990.
Therefore the best determination I can make is this engine is a 1990 made
engine.
Hope this helps someone.
Bill
02-22-2004, 09:44 AM
#2
Guest
Posts: n/a
Re: Identifying your 4.2L engine
Umm... Bill yours is a 76-89 258 2bbl carb engine....
That is what the 'C' means.
The '0' means 1980.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> Ok, this is what I found out in case anyone is interested.
>
> There are two main codes on a block that can help identify a 4.2L engine
>
> 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
> block just below and between #3 and #2 spark plugs holes. It's a flat plate
> and has this format:
>
> The Engine Day Build Code consists of six characters:
>
> 1. Year built code
> 2 & 3. Number of the month
> 4. Engine size/type code
> 5 & 6. Day built
>
> Mine is 012C05
>
> Which comes out to:
>
> 0=1980 or 1990
> 12=Dec
> C=2v carb
> 05=day of the month built
>
> See this site for more info:
> http://home.att.net/~farna/amtech/amcengcodes.htm
>
> I was unclear on whether this would be a 1980 or 1990 engine. To narrow
> it down I located the Engine Serial number (2nd main code) which is located
> right behind the O2 Sensor on the Drivers side of the block.
>
> Mine reads: EF3235444
>
> When I looked for this number on remanufactured engine sites I see that
> this block serial number started in 1981 through 1990.
>
> Therefore the best determination I can make is this engine is a 1990 made
> engine.
>
> Hope this helps someone.
>
> Bill
That is what the 'C' means.
The '0' means 1980.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> Ok, this is what I found out in case anyone is interested.
>
> There are two main codes on a block that can help identify a 4.2L engine
>
> 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
> block just below and between #3 and #2 spark plugs holes. It's a flat plate
> and has this format:
>
> The Engine Day Build Code consists of six characters:
>
> 1. Year built code
> 2 & 3. Number of the month
> 4. Engine size/type code
> 5 & 6. Day built
>
> Mine is 012C05
>
> Which comes out to:
>
> 0=1980 or 1990
> 12=Dec
> C=2v carb
> 05=day of the month built
>
> See this site for more info:
> http://home.att.net/~farna/amtech/amcengcodes.htm
>
> I was unclear on whether this would be a 1980 or 1990 engine. To narrow
> it down I located the Engine Serial number (2nd main code) which is located
> right behind the O2 Sensor on the Drivers side of the block.
>
> Mine reads: EF3235444
>
> When I looked for this number on remanufactured engine sites I see that
> this block serial number started in 1981 through 1990.
>
> Therefore the best determination I can make is this engine is a 1990 made
> engine.
>
> Hope this helps someone.
>
> Bill
02-22-2004, 09:44 AM
#3
Guest
Posts: n/a
Re: Identifying your 4.2L engine
Umm... Bill yours is a 76-89 258 2bbl carb engine....
That is what the 'C' means.
The '0' means 1980.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> Ok, this is what I found out in case anyone is interested.
>
> There are two main codes on a block that can help identify a 4.2L engine
>
> 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
> block just below and between #3 and #2 spark plugs holes. It's a flat plate
> and has this format:
>
> The Engine Day Build Code consists of six characters:
>
> 1. Year built code
> 2 & 3. Number of the month
> 4. Engine size/type code
> 5 & 6. Day built
>
> Mine is 012C05
>
> Which comes out to:
>
> 0=1980 or 1990
> 12=Dec
> C=2v carb
> 05=day of the month built
>
> See this site for more info:
> http://home.att.net/~farna/amtech/amcengcodes.htm
>
> I was unclear on whether this would be a 1980 or 1990 engine. To narrow
> it down I located the Engine Serial number (2nd main code) which is located
> right behind the O2 Sensor on the Drivers side of the block.
>
> Mine reads: EF3235444
>
> When I looked for this number on remanufactured engine sites I see that
> this block serial number started in 1981 through 1990.
>
> Therefore the best determination I can make is this engine is a 1990 made
> engine.
>
> Hope this helps someone.
>
> Bill
That is what the 'C' means.
The '0' means 1980.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> Ok, this is what I found out in case anyone is interested.
>
> There are two main codes on a block that can help identify a 4.2L engine
>
> 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
> block just below and between #3 and #2 spark plugs holes. It's a flat plate
> and has this format:
>
> The Engine Day Build Code consists of six characters:
>
> 1. Year built code
> 2 & 3. Number of the month
> 4. Engine size/type code
> 5 & 6. Day built
>
> Mine is 012C05
>
> Which comes out to:
>
> 0=1980 or 1990
> 12=Dec
> C=2v carb
> 05=day of the month built
>
> See this site for more info:
> http://home.att.net/~farna/amtech/amcengcodes.htm
>
> I was unclear on whether this would be a 1980 or 1990 engine. To narrow
> it down I located the Engine Serial number (2nd main code) which is located
> right behind the O2 Sensor on the Drivers side of the block.
>
> Mine reads: EF3235444
>
> When I looked for this number on remanufactured engine sites I see that
> this block serial number started in 1981 through 1990.
>
> Therefore the best determination I can make is this engine is a 1990 made
> engine.
>
> Hope this helps someone.
>
> Bill
02-22-2004, 09:44 AM
#4
Guest
Posts: n/a
Re: Identifying your 4.2L engine
Umm... Bill yours is a 76-89 258 2bbl carb engine....
That is what the 'C' means.
The '0' means 1980.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> Ok, this is what I found out in case anyone is interested.
>
> There are two main codes on a block that can help identify a 4.2L engine
>
> 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
> block just below and between #3 and #2 spark plugs holes. It's a flat plate
> and has this format:
>
> The Engine Day Build Code consists of six characters:
>
> 1. Year built code
> 2 & 3. Number of the month
> 4. Engine size/type code
> 5 & 6. Day built
>
> Mine is 012C05
>
> Which comes out to:
>
> 0=1980 or 1990
> 12=Dec
> C=2v carb
> 05=day of the month built
>
> See this site for more info:
> http://home.att.net/~farna/amtech/amcengcodes.htm
>
> I was unclear on whether this would be a 1980 or 1990 engine. To narrow
> it down I located the Engine Serial number (2nd main code) which is located
> right behind the O2 Sensor on the Drivers side of the block.
>
> Mine reads: EF3235444
>
> When I looked for this number on remanufactured engine sites I see that
> this block serial number started in 1981 through 1990.
>
> Therefore the best determination I can make is this engine is a 1990 made
> engine.
>
> Hope this helps someone.
>
> Bill
That is what the 'C' means.
The '0' means 1980.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
William Oliveri wrote:
>
> Ok, this is what I found out in case anyone is interested.
>
> There are two main codes on a block that can help identify a 4.2L engine
>
> 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of the
> block just below and between #3 and #2 spark plugs holes. It's a flat plate
> and has this format:
>
> The Engine Day Build Code consists of six characters:
>
> 1. Year built code
> 2 & 3. Number of the month
> 4. Engine size/type code
> 5 & 6. Day built
>
> Mine is 012C05
>
> Which comes out to:
>
> 0=1980 or 1990
> 12=Dec
> C=2v carb
> 05=day of the month built
>
> See this site for more info:
> http://home.att.net/~farna/amtech/amcengcodes.htm
>
> I was unclear on whether this would be a 1980 or 1990 engine. To narrow
> it down I located the Engine Serial number (2nd main code) which is located
> right behind the O2 Sensor on the Drivers side of the block.
>
> Mine reads: EF3235444
>
> When I looked for this number on remanufactured engine sites I see that
> this block serial number started in 1981 through 1990.
>
> Therefore the best determination I can make is this engine is a 1990 made
> engine.
>
> Hope this helps someone.
>
> Bill
02-22-2004, 05:58 PM
#5
Guest
Posts: n/a
Re: Identifying your 4.2L engine
Cannot be. The block casting "444" was not used in 1980. C does stand for
carb though.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4038C045.67935D51@sympatico.ca...
> Umm... Bill yours is a 76-89 258 2bbl carb engine....
>
> That is what the 'C' means.
>
> The '0' means 1980.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > Ok, this is what I found out in case anyone is interested.
> >
> > There are two main codes on a block that can help identify a 4.2L engine
> >
> > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
the
> > block just below and between #3 and #2 spark plugs holes. It's a flat
plate
> > and has this format:
> >
> > The Engine Day Build Code consists of six characters:
> >
> > 1. Year built code
> > 2 & 3. Number of the month
> > 4. Engine size/type code
> > 5 & 6. Day built
> >
> > Mine is 012C05
> >
> > Which comes out to:
> >
> > 0=1980 or 1990
> > 12=Dec
> > C=2v carb
> > 05=day of the month built
> >
> > See this site for more info:
> > http://home.att.net/~farna/amtech/amcengcodes.htm
> >
> > I was unclear on whether this would be a 1980 or 1990 engine. To
narrow
> > it down I located the Engine Serial number (2nd main code) which is
located
> > right behind the O2 Sensor on the Drivers side of the block.
> >
> > Mine reads: EF3235444
> >
> > When I looked for this number on remanufactured engine sites I see
that
> > this block serial number started in 1981 through 1990.
> >
> > Therefore the best determination I can make is this engine is a 1990
made
> > engine.
> >
> > Hope this helps someone.
> >
> > Bill
carb though.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4038C045.67935D51@sympatico.ca...
> Umm... Bill yours is a 76-89 258 2bbl carb engine....
>
> That is what the 'C' means.
>
> The '0' means 1980.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > Ok, this is what I found out in case anyone is interested.
> >
> > There are two main codes on a block that can help identify a 4.2L engine
> >
> > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
the
> > block just below and between #3 and #2 spark plugs holes. It's a flat
plate
> > and has this format:
> >
> > The Engine Day Build Code consists of six characters:
> >
> > 1. Year built code
> > 2 & 3. Number of the month
> > 4. Engine size/type code
> > 5 & 6. Day built
> >
> > Mine is 012C05
> >
> > Which comes out to:
> >
> > 0=1980 or 1990
> > 12=Dec
> > C=2v carb
> > 05=day of the month built
> >
> > See this site for more info:
> > http://home.att.net/~farna/amtech/amcengcodes.htm
> >
> > I was unclear on whether this would be a 1980 or 1990 engine. To
narrow
> > it down I located the Engine Serial number (2nd main code) which is
located
> > right behind the O2 Sensor on the Drivers side of the block.
> >
> > Mine reads: EF3235444
> >
> > When I looked for this number on remanufactured engine sites I see
that
> > this block serial number started in 1981 through 1990.
> >
> > Therefore the best determination I can make is this engine is a 1990
made
> > engine.
> >
> > Hope this helps someone.
> >
> > Bill
02-22-2004, 05:58 PM
#6
Guest
Posts: n/a
Re: Identifying your 4.2L engine
Cannot be. The block casting "444" was not used in 1980. C does stand for
carb though.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4038C045.67935D51@sympatico.ca...
> Umm... Bill yours is a 76-89 258 2bbl carb engine....
>
> That is what the 'C' means.
>
> The '0' means 1980.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > Ok, this is what I found out in case anyone is interested.
> >
> > There are two main codes on a block that can help identify a 4.2L engine
> >
> > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
the
> > block just below and between #3 and #2 spark plugs holes. It's a flat
plate
> > and has this format:
> >
> > The Engine Day Build Code consists of six characters:
> >
> > 1. Year built code
> > 2 & 3. Number of the month
> > 4. Engine size/type code
> > 5 & 6. Day built
> >
> > Mine is 012C05
> >
> > Which comes out to:
> >
> > 0=1980 or 1990
> > 12=Dec
> > C=2v carb
> > 05=day of the month built
> >
> > See this site for more info:
> > http://home.att.net/~farna/amtech/amcengcodes.htm
> >
> > I was unclear on whether this would be a 1980 or 1990 engine. To
narrow
> > it down I located the Engine Serial number (2nd main code) which is
located
> > right behind the O2 Sensor on the Drivers side of the block.
> >
> > Mine reads: EF3235444
> >
> > When I looked for this number on remanufactured engine sites I see
that
> > this block serial number started in 1981 through 1990.
> >
> > Therefore the best determination I can make is this engine is a 1990
made
> > engine.
> >
> > Hope this helps someone.
> >
> > Bill
carb though.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4038C045.67935D51@sympatico.ca...
> Umm... Bill yours is a 76-89 258 2bbl carb engine....
>
> That is what the 'C' means.
>
> The '0' means 1980.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > Ok, this is what I found out in case anyone is interested.
> >
> > There are two main codes on a block that can help identify a 4.2L engine
> >
> > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
the
> > block just below and between #3 and #2 spark plugs holes. It's a flat
plate
> > and has this format:
> >
> > The Engine Day Build Code consists of six characters:
> >
> > 1. Year built code
> > 2 & 3. Number of the month
> > 4. Engine size/type code
> > 5 & 6. Day built
> >
> > Mine is 012C05
> >
> > Which comes out to:
> >
> > 0=1980 or 1990
> > 12=Dec
> > C=2v carb
> > 05=day of the month built
> >
> > See this site for more info:
> > http://home.att.net/~farna/amtech/amcengcodes.htm
> >
> > I was unclear on whether this would be a 1980 or 1990 engine. To
narrow
> > it down I located the Engine Serial number (2nd main code) which is
located
> > right behind the O2 Sensor on the Drivers side of the block.
> >
> > Mine reads: EF3235444
> >
> > When I looked for this number on remanufactured engine sites I see
that
> > this block serial number started in 1981 through 1990.
> >
> > Therefore the best determination I can make is this engine is a 1990
made
> > engine.
> >
> > Hope this helps someone.
> >
> > Bill
02-22-2004, 05:58 PM
#7
Guest
Posts: n/a
Re: Identifying your 4.2L engine
Cannot be. The block casting "444" was not used in 1980. C does stand for
carb though.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4038C045.67935D51@sympatico.ca...
> Umm... Bill yours is a 76-89 258 2bbl carb engine....
>
> That is what the 'C' means.
>
> The '0' means 1980.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > Ok, this is what I found out in case anyone is interested.
> >
> > There are two main codes on a block that can help identify a 4.2L engine
> >
> > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
the
> > block just below and between #3 and #2 spark plugs holes. It's a flat
plate
> > and has this format:
> >
> > The Engine Day Build Code consists of six characters:
> >
> > 1. Year built code
> > 2 & 3. Number of the month
> > 4. Engine size/type code
> > 5 & 6. Day built
> >
> > Mine is 012C05
> >
> > Which comes out to:
> >
> > 0=1980 or 1990
> > 12=Dec
> > C=2v carb
> > 05=day of the month built
> >
> > See this site for more info:
> > http://home.att.net/~farna/amtech/amcengcodes.htm
> >
> > I was unclear on whether this would be a 1980 or 1990 engine. To
narrow
> > it down I located the Engine Serial number (2nd main code) which is
located
> > right behind the O2 Sensor on the Drivers side of the block.
> >
> > Mine reads: EF3235444
> >
> > When I looked for this number on remanufactured engine sites I see
that
> > this block serial number started in 1981 through 1990.
> >
> > Therefore the best determination I can make is this engine is a 1990
made
> > engine.
> >
> > Hope this helps someone.
> >
> > Bill
carb though.
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:4038C045.67935D51@sympatico.ca...
> Umm... Bill yours is a 76-89 258 2bbl carb engine....
>
> That is what the 'C' means.
>
> The '0' means 1980.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> William Oliveri wrote:
> >
> > Ok, this is what I found out in case anyone is interested.
> >
> > There are two main codes on a block that can help identify a 4.2L engine
> >
> > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
the
> > block just below and between #3 and #2 spark plugs holes. It's a flat
plate
> > and has this format:
> >
> > The Engine Day Build Code consists of six characters:
> >
> > 1. Year built code
> > 2 & 3. Number of the month
> > 4. Engine size/type code
> > 5 & 6. Day built
> >
> > Mine is 012C05
> >
> > Which comes out to:
> >
> > 0=1980 or 1990
> > 12=Dec
> > C=2v carb
> > 05=day of the month built
> >
> > See this site for more info:
> > http://home.att.net/~farna/amtech/amcengcodes.htm
> >
> > I was unclear on whether this would be a 1980 or 1990 engine. To
narrow
> > it down I located the Engine Serial number (2nd main code) which is
located
> > right behind the O2 Sensor on the Drivers side of the block.
> >
> > Mine reads: EF3235444
> >
> > When I looked for this number on remanufactured engine sites I see
that
> > this block serial number started in 1981 through 1990.
> >
> > Therefore the best determination I can make is this engine is a 1990
made
> > engine.
> >
> > Hope this helps someone.
> >
> > Bill
02-22-2004, 06:36 PM
#8
Guest
Posts: n/a
Re: Identifying your 4.2L engine
You are the one that posted the freaking link Bill!
Did you not read it?
I did.
And no 'C' does 'not' stand for carb.
Mike
William Oliveri wrote:
>
> Cannot be. The block casting "444" was not used in 1980. C does stand for
> carb though.
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4038C045.67935D51@sympatico.ca...
> > Umm... Bill yours is a 76-89 258 2bbl carb engine....
> >
> > That is what the 'C' means.
> >
> > The '0' means 1980.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > Ok, this is what I found out in case anyone is interested.
> > >
> > > There are two main codes on a block that can help identify a 4.2L engine
> > >
> > > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
> the
> > > block just below and between #3 and #2 spark plugs holes. It's a flat
> plate
> > > and has this format:
> > >
> > > The Engine Day Build Code consists of six characters:
> > >
> > > 1. Year built code
> > > 2 & 3. Number of the month
> > > 4. Engine size/type code
> > > 5 & 6. Day built
> > >
> > > Mine is 012C05
> > >
> > > Which comes out to:
> > >
> > > 0=1980 or 1990
> > > 12=Dec
> > > C=2v carb
> > > 05=day of the month built
> > >
> > > See this site for more info:
> > > http://home.att.net/~farna/amtech/amcengcodes.htm
> > >
> > > I was unclear on whether this would be a 1980 or 1990 engine. To
> narrow
> > > it down I located the Engine Serial number (2nd main code) which is
> located
> > > right behind the O2 Sensor on the Drivers side of the block.
> > >
> > > Mine reads: EF3235444
> > >
> > > When I looked for this number on remanufactured engine sites I see
> that
> > > this block serial number started in 1981 through 1990.
> > >
> > > Therefore the best determination I can make is this engine is a 1990
> made
> > > engine.
> > >
> > > Hope this helps someone.
> > >
> > > Bill
Did you not read it?
I did.
And no 'C' does 'not' stand for carb.
Mike
William Oliveri wrote:
>
> Cannot be. The block casting "444" was not used in 1980. C does stand for
> carb though.
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4038C045.67935D51@sympatico.ca...
> > Umm... Bill yours is a 76-89 258 2bbl carb engine....
> >
> > That is what the 'C' means.
> >
> > The '0' means 1980.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > Ok, this is what I found out in case anyone is interested.
> > >
> > > There are two main codes on a block that can help identify a 4.2L engine
> > >
> > > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
> the
> > > block just below and between #3 and #2 spark plugs holes. It's a flat
> plate
> > > and has this format:
> > >
> > > The Engine Day Build Code consists of six characters:
> > >
> > > 1. Year built code
> > > 2 & 3. Number of the month
> > > 4. Engine size/type code
> > > 5 & 6. Day built
> > >
> > > Mine is 012C05
> > >
> > > Which comes out to:
> > >
> > > 0=1980 or 1990
> > > 12=Dec
> > > C=2v carb
> > > 05=day of the month built
> > >
> > > See this site for more info:
> > > http://home.att.net/~farna/amtech/amcengcodes.htm
> > >
> > > I was unclear on whether this would be a 1980 or 1990 engine. To
> narrow
> > > it down I located the Engine Serial number (2nd main code) which is
> located
> > > right behind the O2 Sensor on the Drivers side of the block.
> > >
> > > Mine reads: EF3235444
> > >
> > > When I looked for this number on remanufactured engine sites I see
> that
> > > this block serial number started in 1981 through 1990.
> > >
> > > Therefore the best determination I can make is this engine is a 1990
> made
> > > engine.
> > >
> > > Hope this helps someone.
> > >
> > > Bill
02-22-2004, 06:36 PM
#9
Guest
Posts: n/a
Re: Identifying your 4.2L engine
You are the one that posted the freaking link Bill!
Did you not read it?
I did.
And no 'C' does 'not' stand for carb.
Mike
William Oliveri wrote:
>
> Cannot be. The block casting "444" was not used in 1980. C does stand for
> carb though.
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4038C045.67935D51@sympatico.ca...
> > Umm... Bill yours is a 76-89 258 2bbl carb engine....
> >
> > That is what the 'C' means.
> >
> > The '0' means 1980.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > Ok, this is what I found out in case anyone is interested.
> > >
> > > There are two main codes on a block that can help identify a 4.2L engine
> > >
> > > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
> the
> > > block just below and between #3 and #2 spark plugs holes. It's a flat
> plate
> > > and has this format:
> > >
> > > The Engine Day Build Code consists of six characters:
> > >
> > > 1. Year built code
> > > 2 & 3. Number of the month
> > > 4. Engine size/type code
> > > 5 & 6. Day built
> > >
> > > Mine is 012C05
> > >
> > > Which comes out to:
> > >
> > > 0=1980 or 1990
> > > 12=Dec
> > > C=2v carb
> > > 05=day of the month built
> > >
> > > See this site for more info:
> > > http://home.att.net/~farna/amtech/amcengcodes.htm
> > >
> > > I was unclear on whether this would be a 1980 or 1990 engine. To
> narrow
> > > it down I located the Engine Serial number (2nd main code) which is
> located
> > > right behind the O2 Sensor on the Drivers side of the block.
> > >
> > > Mine reads: EF3235444
> > >
> > > When I looked for this number on remanufactured engine sites I see
> that
> > > this block serial number started in 1981 through 1990.
> > >
> > > Therefore the best determination I can make is this engine is a 1990
> made
> > > engine.
> > >
> > > Hope this helps someone.
> > >
> > > Bill
Did you not read it?
I did.
And no 'C' does 'not' stand for carb.
Mike
William Oliveri wrote:
>
> Cannot be. The block casting "444" was not used in 1980. C does stand for
> carb though.
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4038C045.67935D51@sympatico.ca...
> > Umm... Bill yours is a 76-89 258 2bbl carb engine....
> >
> > That is what the 'C' means.
> >
> > The '0' means 1980.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > Ok, this is what I found out in case anyone is interested.
> > >
> > > There are two main codes on a block that can help identify a 4.2L engine
> > >
> > > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
> the
> > > block just below and between #3 and #2 spark plugs holes. It's a flat
> plate
> > > and has this format:
> > >
> > > The Engine Day Build Code consists of six characters:
> > >
> > > 1. Year built code
> > > 2 & 3. Number of the month
> > > 4. Engine size/type code
> > > 5 & 6. Day built
> > >
> > > Mine is 012C05
> > >
> > > Which comes out to:
> > >
> > > 0=1980 or 1990
> > > 12=Dec
> > > C=2v carb
> > > 05=day of the month built
> > >
> > > See this site for more info:
> > > http://home.att.net/~farna/amtech/amcengcodes.htm
> > >
> > > I was unclear on whether this would be a 1980 or 1990 engine. To
> narrow
> > > it down I located the Engine Serial number (2nd main code) which is
> located
> > > right behind the O2 Sensor on the Drivers side of the block.
> > >
> > > Mine reads: EF3235444
> > >
> > > When I looked for this number on remanufactured engine sites I see
> that
> > > this block serial number started in 1981 through 1990.
> > >
> > > Therefore the best determination I can make is this engine is a 1990
> made
> > > engine.
> > >
> > > Hope this helps someone.
> > >
> > > Bill
02-22-2004, 06:36 PM
#10
Guest
Posts: n/a
Re: Identifying your 4.2L engine
You are the one that posted the freaking link Bill!
Did you not read it?
I did.
And no 'C' does 'not' stand for carb.
Mike
William Oliveri wrote:
>
> Cannot be. The block casting "444" was not used in 1980. C does stand for
> carb though.
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4038C045.67935D51@sympatico.ca...
> > Umm... Bill yours is a 76-89 258 2bbl carb engine....
> >
> > That is what the 'C' means.
> >
> > The '0' means 1980.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > Ok, this is what I found out in case anyone is interested.
> > >
> > > There are two main codes on a block that can help identify a 4.2L engine
> > >
> > > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
> the
> > > block just below and between #3 and #2 spark plugs holes. It's a flat
> plate
> > > and has this format:
> > >
> > > The Engine Day Build Code consists of six characters:
> > >
> > > 1. Year built code
> > > 2 & 3. Number of the month
> > > 4. Engine size/type code
> > > 5 & 6. Day built
> > >
> > > Mine is 012C05
> > >
> > > Which comes out to:
> > >
> > > 0=1980 or 1990
> > > 12=Dec
> > > C=2v carb
> > > 05=day of the month built
> > >
> > > See this site for more info:
> > > http://home.att.net/~farna/amtech/amcengcodes.htm
> > >
> > > I was unclear on whether this would be a 1980 or 1990 engine. To
> narrow
> > > it down I located the Engine Serial number (2nd main code) which is
> located
> > > right behind the O2 Sensor on the Drivers side of the block.
> > >
> > > Mine reads: EF3235444
> > >
> > > When I looked for this number on remanufactured engine sites I see
> that
> > > this block serial number started in 1981 through 1990.
> > >
> > > Therefore the best determination I can make is this engine is a 1990
> made
> > > engine.
> > >
> > > Hope this helps someone.
> > >
> > > Bill
Did you not read it?
I did.
And no 'C' does 'not' stand for carb.
Mike
William Oliveri wrote:
>
> Cannot be. The block casting "444" was not used in 1980. C does stand for
> carb though.
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:4038C045.67935D51@sympatico.ca...
> > Umm... Bill yours is a 76-89 258 2bbl carb engine....
> >
> > That is what the 'C' means.
> >
> > The '0' means 1980.
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > William Oliveri wrote:
> > >
> > > Ok, this is what I found out in case anyone is interested.
> > >
> > > There are two main codes on a block that can help identify a 4.2L engine
> > >
> > > 1st. ENGINE DAY BUILD CODE. This is located on the passenger side of
> the
> > > block just below and between #3 and #2 spark plugs holes. It's a flat
> plate
> > > and has this format:
> > >
> > > The Engine Day Build Code consists of six characters:
> > >
> > > 1. Year built code
> > > 2 & 3. Number of the month
> > > 4. Engine size/type code
> > > 5 & 6. Day built
> > >
> > > Mine is 012C05
> > >
> > > Which comes out to:
> > >
> > > 0=1980 or 1990
> > > 12=Dec
> > > C=2v carb
> > > 05=day of the month built
> > >
> > > See this site for more info:
> > > http://home.att.net/~farna/amtech/amcengcodes.htm
> > >
> > > I was unclear on whether this would be a 1980 or 1990 engine. To
> narrow
> > > it down I located the Engine Serial number (2nd main code) which is
> located
> > > right behind the O2 Sensor on the Drivers side of the block.
> > >
> > > Mine reads: EF3235444
> > >
> > > When I looked for this number on remanufactured engine sites I see
> that
> > > this block serial number started in 1981 through 1990.
> > >
> > > Therefore the best determination I can make is this engine is a 1990
> made
> > > engine.
> > >
> > > Hope this helps someone.
> > >
> > > Bill
