I just bought a Deutz
01-09-2006, 09:14 PM
#1
Guest
Posts: n/a
I just bought a Deutz
I just bought a Deutz four cylinder engine. It was on a Morbark type
machine and some illegal immigrant c********r ran it out of oil. I
figure the crank will need turning and the cam and lifters will be gone
but the cylinders probably in good shape. For $150 how wrong could I
go?
Now all I need is the jeep to put it in. I'm thinking a buggy sprung
YJ with a bad four cylinder engine and trans would be the best host. I
can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
transmission, but would I be able to use a 700R4 without repositioning
the T-case?
machine and some illegal immigrant c********r ran it out of oil. I
figure the crank will need turning and the cam and lifters will be gone
but the cylinders probably in good shape. For $150 how wrong could I
go?
Now all I need is the jeep to put it in. I'm thinking a buggy sprung
YJ with a bad four cylinder engine and trans would be the best host. I
can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
transmission, but would I be able to use a 700R4 without repositioning
the T-case?
01-09-2006, 09:19 PM
#2
Guest
Posts: n/a
Re: I just bought a Deutz
Cylinders need oil too. For $150, heck the starter is probably worth that.
I will be interested to see how it turns out, after the propane conversion,
the ducted cabin heat, and the electric baseboard you plan to install.
Earle
"Bret Ludwig" <bretldwig@yahoo.com> wrote in message
news:1136859281.301745.301190@g14g2000cwa.googlegr oups.com...
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
>
I will be interested to see how it turns out, after the propane conversion,
the ducted cabin heat, and the electric baseboard you plan to install.
Earle
"Bret Ludwig" <bretldwig@yahoo.com> wrote in message
news:1136859281.301745.301190@g14g2000cwa.googlegr oups.com...
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
>
01-09-2006, 09:19 PM
#3
Guest
Posts: n/a
Re: I just bought a Deutz
Cylinders need oil too. For $150, heck the starter is probably worth that.
I will be interested to see how it turns out, after the propane conversion,
the ducted cabin heat, and the electric baseboard you plan to install.
Earle
"Bret Ludwig" <bretldwig@yahoo.com> wrote in message
news:1136859281.301745.301190@g14g2000cwa.googlegr oups.com...
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
>
I will be interested to see how it turns out, after the propane conversion,
the ducted cabin heat, and the electric baseboard you plan to install.
Earle
"Bret Ludwig" <bretldwig@yahoo.com> wrote in message
news:1136859281.301745.301190@g14g2000cwa.googlegr oups.com...
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
>
01-09-2006, 09:19 PM
#4
Guest
Posts: n/a
Re: I just bought a Deutz
Cylinders need oil too. For $150, heck the starter is probably worth that.
I will be interested to see how it turns out, after the propane conversion,
the ducted cabin heat, and the electric baseboard you plan to install.
Earle
"Bret Ludwig" <bretldwig@yahoo.com> wrote in message
news:1136859281.301745.301190@g14g2000cwa.googlegr oups.com...
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
>
I will be interested to see how it turns out, after the propane conversion,
the ducted cabin heat, and the electric baseboard you plan to install.
Earle
"Bret Ludwig" <bretldwig@yahoo.com> wrote in message
news:1136859281.301745.301190@g14g2000cwa.googlegr oups.com...
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
>
01-09-2006, 09:47 PM
#5
Guest
Posts: n/a
Re: I just bought a Deutz
Earle Horton wrote:
> Cylinders need oil too. For $150, heck the starter is probably worth that.
> I will be interested to see how it turns out, after the propane conversion,
> the ducted cabin heat, and the electric baseboard you plan to install.
>
No propane, no ducted cabin heat, and no electric baseboard (??). My
goal is just to get the damned thing going. We'll worry about all
non-essentials after that.
I just ordered a manual and a cylinder base wrench. I have now more
than doubled my investment... Should be interesting.
01-09-2006, 09:47 PM
#6
Guest
Posts: n/a
Re: I just bought a Deutz
Earle Horton wrote:
> Cylinders need oil too. For $150, heck the starter is probably worth that.
> I will be interested to see how it turns out, after the propane conversion,
> the ducted cabin heat, and the electric baseboard you plan to install.
>
No propane, no ducted cabin heat, and no electric baseboard (??). My
goal is just to get the damned thing going. We'll worry about all
non-essentials after that.
I just ordered a manual and a cylinder base wrench. I have now more
than doubled my investment... Should be interesting.
01-09-2006, 09:47 PM
#7
Guest
Posts: n/a
Re: I just bought a Deutz
Earle Horton wrote:
> Cylinders need oil too. For $150, heck the starter is probably worth that.
> I will be interested to see how it turns out, after the propane conversion,
> the ducted cabin heat, and the electric baseboard you plan to install.
>
No propane, no ducted cabin heat, and no electric baseboard (??). My
goal is just to get the damned thing going. We'll worry about all
non-essentials after that.
I just ordered a manual and a cylinder base wrench. I have now more
than doubled my investment... Should be interesting.
01-09-2006, 10:13 PM
#8
Guest
Posts: n/a
Re: I just bought a Deutz
Thank you Jesus, there is a God.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Bret Ludwig wrote:
>
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Bret Ludwig wrote:
>
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
01-09-2006, 10:13 PM
#9
Guest
Posts: n/a
Re: I just bought a Deutz
Thank you Jesus, there is a God.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Bret Ludwig wrote:
>
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Bret Ludwig wrote:
>
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
01-09-2006, 10:13 PM
#10
Guest
Posts: n/a
Re: I just bought a Deutz
Thank you Jesus, there is a God.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Bret Ludwig wrote:
>
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
Bret Ludwig wrote:
>
> I just bought a Deutz four cylinder engine. It was on a Morbark type
> machine and some illegal immigrant c********r ran it out of oil. I
> figure the crank will need turning and the cam and lifters will be gone
> but the cylinders probably in good shape. For $150 how wrong could I
> go?
>
> Now all I need is the jeep to put it in. I'm thinking a buggy sprung
> YJ with a bad four cylinder engine and trans would be the best host. I
> can sell the Jeep 4 at least as core. sledgehammer the POS Peugeot
> transmission, but would I be able to use a 700R4 without repositioning
> the T-case?
