DougW

Nathan W. Collier did pass the time by typing:
> "DougW" <post.replies@invalid.address> wrote in message
> news:f_Sfc.2794$ec1.869@okepread01...
>> Try using a smear of PS fluid on the washers and o-rings.
>
> after the first try to place the solenoid assembly the entire area is
> covered with PS fluid thats packed in the assembly. no joy. even tried a
> dab of silicone.

Hmm.. that leaves using some sort of hi-tack sealant but I'm not sure
what problems that could cause if it got into the PS fluid. Could you have
made the ports level, sat the washers on the winch, then lowered the solenoid
pack down?

Maby saran wrap, foil, or some tape stuck to itself? That would have been
thin and fairly easy to pull out

Oh well, It's in and that is what matters in the long run. :)

--
DougW

DougW

Nathan W. Collier did pass the time by typing:
> "DougW" <post.replies@invalid.address> wrote in message
> news:f_Sfc.2794$ec1.869@okepread01...
>> Try using a smear of PS fluid on the washers and o-rings.
>
> after the first try to place the solenoid assembly the entire area is
> covered with PS fluid thats packed in the assembly. no joy. even tried a
> dab of silicone.

Hmm.. that leaves using some sort of hi-tack sealant but I'm not sure
what problems that could cause if it got into the PS fluid. Could you have
made the ports level, sat the washers on the winch, then lowered the solenoid
pack down?

Maby saran wrap, foil, or some tape stuck to itself? That would have been
thin and fairly easy to pull out

Oh well, It's in and that is what matters in the long run. :)

--
DougW

DougW

Nathan W. Collier did pass the time by typing:
> "DougW" <post.replies@invalid.address> wrote in message
> news:f_Sfc.2794$ec1.869@okepread01...
>> Try using a smear of PS fluid on the washers and o-rings.
>
> after the first try to place the solenoid assembly the entire area is
> covered with PS fluid thats packed in the assembly. no joy. even tried a
> dab of silicone.

Hmm.. that leaves using some sort of hi-tack sealant but I'm not sure
what problems that could cause if it got into the PS fluid. Could you have
made the ports level, sat the washers on the winch, then lowered the solenoid
pack down?

Maby saran wrap, foil, or some tape stuck to itself? That would have been
thin and fairly easy to pull out

Oh well, It's in and that is what matters in the long run. :)

--
DougW

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Bookmarked. Remember to name your pages. Something like: <title>
Jeep hydraulic winch installation </title> will help us, and the
spiders.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

"Nathan W. Collier" wrote:
>
> after watching a hydraulic winch in action i knew that it was what i wanted
> for my project rubicon. i searched the net far and wide for a guide to walk
> me through the installation process and although i found general lists i
> couldnt find a complete guide so i knew what i had to do.
>
> http://7slotgrille.com/projects/03rubicon/mm/index.html (extensive, and not
> dial up friendly)
>
> i hope some of you find it useful. let me know if you feel it is incomplete
> or any other suggestions for improvement.
>
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Bookmarked. Remember to name your pages. Something like: <title>
Jeep hydraulic winch installation </title> will help us, and the
spiders.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

"Nathan W. Collier" wrote:
>
> after watching a hydraulic winch in action i knew that it was what i wanted
> for my project rubicon. i searched the net far and wide for a guide to walk
> me through the installation process and although i found general lists i
> couldnt find a complete guide so i knew what i had to do.
>
> http://7slotgrille.com/projects/03rubicon/mm/index.html (extensive, and not
> dial up friendly)
>
> i hope some of you find it useful. let me know if you feel it is incomplete
> or any other suggestions for improvement.
>
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Bookmarked. Remember to name your pages. Something like: <title>
Jeep hydraulic winch installation </title> will help us, and the
spiders.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

"Nathan W. Collier" wrote:
>
> after watching a hydraulic winch in action i knew that it was what i wanted
> for my project rubicon. i searched the net far and wide for a guide to walk
> me through the installation process and although i found general lists i
> couldnt find a complete guide so i knew what i had to do.
>
> http://7slotgrille.com/projects/03rubicon/mm/index.html (extensive, and not
> dial up friendly)
>
> i hope some of you find it useful. let me know if you feel it is incomplete
> or any other suggestions for improvement.
>
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III

Bookmarked. Remember to name your pages. Something like: <title>
Jeep hydraulic winch installation </title> will help us, and the
spiders.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

"Nathan W. Collier" wrote:
>
> after watching a hydraulic winch in action i knew that it was what i wanted
> for my project rubicon. i searched the net far and wide for a guide to walk
> me through the installation process and although i found general lists i
> couldnt find a complete guide so i knew what i had to do.
>
> http://7slotgrille.com/projects/03rubicon/mm/index.html (extensive, and not
> dial up friendly)
>
> i hope some of you find it useful. let me know if you feel it is incomplete
> or any other suggestions for improvement.
>
> --
> Nathan W. Collier
> http://UtilityOffRoad.com
> http://7SlotGrille.com

Nathan W. Collier

"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40800578.36DF65C9@***.net...
> Bookmarked. Remember to name your pages. Something like: <title>
> Jeep hydraulic winch installation </title> will help us, and the
> spiders.

thanks bill! i forgot about that totally. done and done.

--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com

Nathan W. Collier

"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40800578.36DF65C9@***.net...
> Bookmarked. Remember to name your pages. Something like: <title>
> Jeep hydraulic winch installation </title> will help us, and the
> spiders.

thanks bill! i forgot about that totally. done and done.

--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com

Nathan W. Collier

"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40800578.36DF65C9@***.net...
> Bookmarked. Remember to name your pages. Something like: <title>
> Jeep hydraulic winch installation </title> will help us, and the
> spiders.

thanks bill! i forgot about that totally. done and done.

--
Nathan W. Collier
http://UtilityOffRoad.com
http://7SlotGrille.com