How to replace front blinker bulb in 97 Grand Cherokee
#11
Guest
Posts: n/a
Re: How to replace front blinker bulb in 97 Grand Cherokee
Lon did pass the time by typing:
> DougW proclaimed:
>
>> Ted Swirsky did pass the time by typing:
>>
>>> 1997 Jeep Grand Cherokee. Laredo.
>>>
>>> How the heck to you get to the bulb? It's the front turn signal on the
>>> drivers side. (The one below the headlight-not the one on the side).
>>>
>>> Doesn't look like I can get near it from below and the air filter box is
>>> in the way from above.
>>>
>>> I'm good with tools but don't do much with cars. Is this something I have
>>> to pay a dealer for?
>>
>>
>> If it's like most you have to remove the front center grill then two screws
>> to rotate the lens assembly out.
>>
> On a ZJ? There is that much difference between a 95 and 97? The
> screws are readily available from the top and front, but the marker
> assembly does have to come out first.
It's been a long while since I did bulbs for anyone. The side marker comes
out with one screw inside and one that is reached between the lower part
of the side marker and the signal.
There might be a screw that requires that side marker to come out.
carp!
There is. It's at the back of the lower lamp. I forgot about that one.
This is for the 93ZJ
http://www.revbeergoggles.com/temp/lamp-r-hole.jpg
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
> DougW proclaimed:
>
>> Ted Swirsky did pass the time by typing:
>>
>>> 1997 Jeep Grand Cherokee. Laredo.
>>>
>>> How the heck to you get to the bulb? It's the front turn signal on the
>>> drivers side. (The one below the headlight-not the one on the side).
>>>
>>> Doesn't look like I can get near it from below and the air filter box is
>>> in the way from above.
>>>
>>> I'm good with tools but don't do much with cars. Is this something I have
>>> to pay a dealer for?
>>
>>
>> If it's like most you have to remove the front center grill then two screws
>> to rotate the lens assembly out.
>>
> On a ZJ? There is that much difference between a 95 and 97? The
> screws are readily available from the top and front, but the marker
> assembly does have to come out first.
It's been a long while since I did bulbs for anyone. The side marker comes
out with one screw inside and one that is reached between the lower part
of the side marker and the signal.
There might be a screw that requires that side marker to come out.
carp!
There is. It's at the back of the lower lamp. I forgot about that one.
This is for the 93ZJ
http://www.revbeergoggles.com/temp/lamp-r-hole.jpg
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
#12
Guest
Posts: n/a
Re: How to replace front blinker bulb in 97 Grand Cherokee
Lon did pass the time by typing:
> DougW proclaimed:
>
>> Ted Swirsky did pass the time by typing:
>>
>>> 1997 Jeep Grand Cherokee. Laredo.
>>>
>>> How the heck to you get to the bulb? It's the front turn signal on the
>>> drivers side. (The one below the headlight-not the one on the side).
>>>
>>> Doesn't look like I can get near it from below and the air filter box is
>>> in the way from above.
>>>
>>> I'm good with tools but don't do much with cars. Is this something I have
>>> to pay a dealer for?
>>
>>
>> If it's like most you have to remove the front center grill then two screws
>> to rotate the lens assembly out.
>>
> On a ZJ? There is that much difference between a 95 and 97? The
> screws are readily available from the top and front, but the marker
> assembly does have to come out first.
It's been a long while since I did bulbs for anyone. The side marker comes
out with one screw inside and one that is reached between the lower part
of the side marker and the signal.
There might be a screw that requires that side marker to come out.
carp!
There is. It's at the back of the lower lamp. I forgot about that one.
This is for the 93ZJ
http://www.revbeergoggles.com/temp/lamp-r-hole.jpg
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
> DougW proclaimed:
>
>> Ted Swirsky did pass the time by typing:
>>
>>> 1997 Jeep Grand Cherokee. Laredo.
>>>
>>> How the heck to you get to the bulb? It's the front turn signal on the
>>> drivers side. (The one below the headlight-not the one on the side).
>>>
>>> Doesn't look like I can get near it from below and the air filter box is
>>> in the way from above.
>>>
>>> I'm good with tools but don't do much with cars. Is this something I have
>>> to pay a dealer for?
>>
>>
>> If it's like most you have to remove the front center grill then two screws
>> to rotate the lens assembly out.
>>
> On a ZJ? There is that much difference between a 95 and 97? The
> screws are readily available from the top and front, but the marker
> assembly does have to come out first.
It's been a long while since I did bulbs for anyone. The side marker comes
out with one screw inside and one that is reached between the lower part
of the side marker and the signal.
There might be a screw that requires that side marker to come out.
carp!
There is. It's at the back of the lower lamp. I forgot about that one.
This is for the 93ZJ
http://www.revbeergoggles.com/temp/lamp-r-hole.jpg
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
#13
Guest
Posts: n/a
Re: How to replace front blinker bulb in 97 Grand Cherokee
Lon did pass the time by typing:
> DougW proclaimed:
>
>> Ted Swirsky did pass the time by typing:
>>
>>> 1997 Jeep Grand Cherokee. Laredo.
>>>
>>> How the heck to you get to the bulb? It's the front turn signal on the
>>> drivers side. (The one below the headlight-not the one on the side).
>>>
>>> Doesn't look like I can get near it from below and the air filter box is
>>> in the way from above.
>>>
>>> I'm good with tools but don't do much with cars. Is this something I have
>>> to pay a dealer for?
>>
>>
>> If it's like most you have to remove the front center grill then two screws
>> to rotate the lens assembly out.
>>
> On a ZJ? There is that much difference between a 95 and 97? The
> screws are readily available from the top and front, but the marker
> assembly does have to come out first.
It's been a long while since I did bulbs for anyone. The side marker comes
out with one screw inside and one that is reached between the lower part
of the side marker and the signal.
There might be a screw that requires that side marker to come out.
carp!
There is. It's at the back of the lower lamp. I forgot about that one.
This is for the 93ZJ
http://www.revbeergoggles.com/temp/lamp-r-hole.jpg
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
> DougW proclaimed:
>
>> Ted Swirsky did pass the time by typing:
>>
>>> 1997 Jeep Grand Cherokee. Laredo.
>>>
>>> How the heck to you get to the bulb? It's the front turn signal on the
>>> drivers side. (The one below the headlight-not the one on the side).
>>>
>>> Doesn't look like I can get near it from below and the air filter box is
>>> in the way from above.
>>>
>>> I'm good with tools but don't do much with cars. Is this something I have
>>> to pay a dealer for?
>>
>>
>> If it's like most you have to remove the front center grill then two screws
>> to rotate the lens assembly out.
>>
> On a ZJ? There is that much difference between a 95 and 97? The
> screws are readily available from the top and front, but the marker
> assembly does have to come out first.
It's been a long while since I did bulbs for anyone. The side marker comes
out with one screw inside and one that is reached between the lower part
of the side marker and the signal.
There might be a screw that requires that side marker to come out.
carp!
There is. It's at the back of the lower lamp. I forgot about that one.
This is for the 93ZJ
http://www.revbeergoggles.com/temp/lamp-r-hole.jpg
http://www.revbeergoggles.com/temp/l...r-rf-screw.jpg
http://www.revbeergoggles.com/temp/lamp-marker-rf.jpg
http://www.revbeergoggles.com/temp/lamp-turn-rf.jpg
--
DougW
Thread
Thread Starter
Forum
Replies
Last Post
Cappy2112
Jeep Mailing List
24
06-07-2006 08:58 PM
Fun Bobby
Jeep Mailing List
3
07-15-2003 05:45 PM
Fun Bobby
Jeep Mailing List
1
07-14-2003 06:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)