How to remove A/C lines at evaporator canister?
10-31-2007, 06:43 PM
#11
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
John writes:
> The hoses turn freely, but I can't pull them apart.
> Any ideas?
Buy or make a removal tool for the garter spring connectors.
http://www.google.com/search?q=spring+lock+tool
> The hoses turn freely, but I can't pull them apart.
> Any ideas?
Buy or make a removal tool for the garter spring connectors.
http://www.google.com/search?q=spring+lock+tool
10-31-2007, 06:43 PM
#12
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
John writes:
> The hoses turn freely, but I can't pull them apart.
> Any ideas?
Buy or make a removal tool for the garter spring connectors.
http://www.google.com/search?q=spring+lock+tool
> The hoses turn freely, but I can't pull them apart.
> Any ideas?
Buy or make a removal tool for the garter spring connectors.
http://www.google.com/search?q=spring+lock+tool
10-31-2007, 06:43 PM
#13
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
John writes:
> The hoses turn freely, but I can't pull them apart.
> Any ideas?
Buy or make a removal tool for the garter spring connectors.
http://www.google.com/search?q=spring+lock+tool
> The hoses turn freely, but I can't pull them apart.
> Any ideas?
Buy or make a removal tool for the garter spring connectors.
http://www.google.com/search?q=spring+lock+tool
10-31-2007, 07:25 PM
#14
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
Richard J Kinch wrote:
> John writes:
>
>> The hoses turn freely, but I can't pull them apart.
>> Any ideas?
>
> Buy or make a removal tool for the garter spring connectors.
>
> http://www.google.com/search?q=spring+lock+tool
Thanks Richard - I was reading a *very* comprehensive post you put
together a while back and found this out before I saw your reply. Very
helpful stuff there! I really appreciate it!
-John
> John writes:
>
>> The hoses turn freely, but I can't pull them apart.
>> Any ideas?
>
> Buy or make a removal tool for the garter spring connectors.
>
> http://www.google.com/search?q=spring+lock+tool
Thanks Richard - I was reading a *very* comprehensive post you put
together a while back and found this out before I saw your reply. Very
helpful stuff there! I really appreciate it!
-John
10-31-2007, 07:25 PM
#15
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
Richard J Kinch wrote:
> John writes:
>
>> The hoses turn freely, but I can't pull them apart.
>> Any ideas?
>
> Buy or make a removal tool for the garter spring connectors.
>
> http://www.google.com/search?q=spring+lock+tool
Thanks Richard - I was reading a *very* comprehensive post you put
together a while back and found this out before I saw your reply. Very
helpful stuff there! I really appreciate it!
-John
> John writes:
>
>> The hoses turn freely, but I can't pull them apart.
>> Any ideas?
>
> Buy or make a removal tool for the garter spring connectors.
>
> http://www.google.com/search?q=spring+lock+tool
Thanks Richard - I was reading a *very* comprehensive post you put
together a while back and found this out before I saw your reply. Very
helpful stuff there! I really appreciate it!
-John
10-31-2007, 07:25 PM
#16
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
Richard J Kinch wrote:
> John writes:
>
>> The hoses turn freely, but I can't pull them apart.
>> Any ideas?
>
> Buy or make a removal tool for the garter spring connectors.
>
> http://www.google.com/search?q=spring+lock+tool
Thanks Richard - I was reading a *very* comprehensive post you put
together a while back and found this out before I saw your reply. Very
helpful stuff there! I really appreciate it!
-John
> John writes:
>
>> The hoses turn freely, but I can't pull them apart.
>> Any ideas?
>
> Buy or make a removal tool for the garter spring connectors.
>
> http://www.google.com/search?q=spring+lock+tool
Thanks Richard - I was reading a *very* comprehensive post you put
together a while back and found this out before I saw your reply. Very
helpful stuff there! I really appreciate it!
-John
10-31-2007, 07:59 PM
#17
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
They take a little plastic tool that sides inside the connection to open
the release spring: http://www.----------.com/OringTool.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"John" <john@nospamplease.com> wrote in message
news:bE4Wi.7031$BD.5038@trndny06...
> OK, so I'm pulling the heater box out to clean out all the junk.
>
> I've got everything out except the A/C lines, just above the evaporator
> canister, next to the heater core hoses. These had spring clips on them
> which I removed. The hoses turn freely, but I can't pull them apart.
> Any ideas?
>
> (And yes, the system has been purged.)
>
> Thanks!
>
> -John
--
Posted via a free Usenet account from http://www.teranews.com
the release spring: http://www.----------.com/OringTool.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"John" <john@nospamplease.com> wrote in message
news:bE4Wi.7031$BD.5038@trndny06...
> OK, so I'm pulling the heater box out to clean out all the junk.
>
> I've got everything out except the A/C lines, just above the evaporator
> canister, next to the heater core hoses. These had spring clips on them
> which I removed. The hoses turn freely, but I can't pull them apart.
> Any ideas?
>
> (And yes, the system has been purged.)
>
> Thanks!
>
> -John
--
Posted via a free Usenet account from http://www.teranews.com
10-31-2007, 07:59 PM
#18
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
They take a little plastic tool that sides inside the connection to open
the release spring: http://www.----------.com/OringTool.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"John" <john@nospamplease.com> wrote in message
news:bE4Wi.7031$BD.5038@trndny06...
> OK, so I'm pulling the heater box out to clean out all the junk.
>
> I've got everything out except the A/C lines, just above the evaporator
> canister, next to the heater core hoses. These had spring clips on them
> which I removed. The hoses turn freely, but I can't pull them apart.
> Any ideas?
>
> (And yes, the system has been purged.)
>
> Thanks!
>
> -John
--
Posted via a free Usenet account from http://www.teranews.com
the release spring: http://www.----------.com/OringTool.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"John" <john@nospamplease.com> wrote in message
news:bE4Wi.7031$BD.5038@trndny06...
> OK, so I'm pulling the heater box out to clean out all the junk.
>
> I've got everything out except the A/C lines, just above the evaporator
> canister, next to the heater core hoses. These had spring clips on them
> which I removed. The hoses turn freely, but I can't pull them apart.
> Any ideas?
>
> (And yes, the system has been purged.)
>
> Thanks!
>
> -John
--
Posted via a free Usenet account from http://www.teranews.com
10-31-2007, 07:59 PM
#19
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
They take a little plastic tool that sides inside the connection to open
the release spring: http://www.----------.com/OringTool.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"John" <john@nospamplease.com> wrote in message
news:bE4Wi.7031$BD.5038@trndny06...
> OK, so I'm pulling the heater box out to clean out all the junk.
>
> I've got everything out except the A/C lines, just above the evaporator
> canister, next to the heater core hoses. These had spring clips on them
> which I removed. The hoses turn freely, but I can't pull them apart.
> Any ideas?
>
> (And yes, the system has been purged.)
>
> Thanks!
>
> -John
--
Posted via a free Usenet account from http://www.teranews.com
the release spring: http://www.----------.com/OringTool.jpg
God Bless America, Bill O|||||||O
mailto:--------------------
"John" <john@nospamplease.com> wrote in message
news:bE4Wi.7031$BD.5038@trndny06...
> OK, so I'm pulling the heater box out to clean out all the junk.
>
> I've got everything out except the A/C lines, just above the evaporator
> canister, next to the heater core hoses. These had spring clips on them
> which I removed. The hoses turn freely, but I can't pull them apart.
> Any ideas?
>
> (And yes, the system has been purged.)
>
> Thanks!
>
> -John
--
Posted via a free Usenet account from http://www.teranews.com
10-31-2007, 07:59 PM
#20
Guest
Posts: n/a
Re: How to remove A/C lines at evaporator canister?
There you go again, the little Psychopath, jealous, REALLY JEALOUS,
over the fact that I once own a '37 Lasalle, ranting over my documents,
possessions, successes, manliness, Super Southern California surfer body,
Christian family, and name. What a jealous little draft dodging senile
coward from 12.205.158.32 AT&T WorldNet Services ATT, Mediacom
Communications Corp MEDIACOMCC-12-205-156-0-GULF-BREEZE-Florida, that of
course, I killed, now it's 12-202-247-159.client.mchsi.com New Albany,
Indiana asylum. It doesn't have a DD214, it had to have served our country
for that. Who's only way to get attention is to make a fool of its self,
with its goat obsession/fetish, where it writes via remailers, to no one's
surprise. Like when the other kids laughed at its attempt to use foul
language in elementary school play grounds, but its just gibberish. Too
senile to remember what he last wrote, like the rest of Florida. You remind
me of a little rat dog, like a Mexican Chiwawa with its senseless barking
it's rabid head off, me too, me too. And is too afraid to use your name,
address, or even sign your statement as any man would, totally worthless!
Posted pornography at: news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com
As a member of the moral majority I know what ---- is when I see it!
But now worth the time to forward this low life to: abuse@mchsi.com,
fraud@mchsi.com, fraud@4AX.COM, abuse@aioe.org, admin@***.net,
abuse@teranews.com for forgery.
I thought your attacks were just personal disagreements, but with
passing of my country's Independents Day, I realize these attacks are
stemming from my love of God and America, and that's what you've been doing
all along is declaring your hatred for the United States of America, with
each declaration of my signature, but just too cowardly to be a ---------.
It's America, love it, or leave it, so get the f*ck out!
Considering the source, which you're a habitual lair, so these plus your
other accusations would be thrown out of court.
When are you going to take responsibility for yourself, and become a
man??????????
People that follow astrology, know the traits you have listed are a
hundred eighty out from any Capricorn.
Forwarded to: alt.binaries.pictures.autos, alt.binaries.automobile.pictures
groups so they may to see what an a**hole you really are!!!!!
Is this what your Psychologist wrote about you? They don't fit any
Capricorn, sounds like a spoil Leo.
You're a LIAR and never been in the Service much less Vietnam, as you
suggest!!!!!
If you think I'm a Psycho, then report me to my friends at the San Diego
Sheriffs Department.
I'm just really curious as to who you think will believe you over any
man responsible enough to list his name and address here and in every place
I know of????? All you can do is lie, as most everything you have said
contradicts it's self.
You know what they say, once a ------ coward, always a ------ coward.
I won't give up until traitors like you are gone from these groups I
participate and see you've pretty well killed this group I will devote my
life to reminding your groups who you are!!!!!!!
I would appreciate the name and address of these trolls, Square Wheel:
S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca and
24bit:
12.205.158.32 AT&T WorldNet Services ATT Mediacom Communications Corp. I
will keep your name in confidence, kindly email -------------------- or
LW------@------.net
Sincerely,
Llewellyn W. (Bill) ------ III
You're not fooling anyone, ------! You need to get back in the hospital
before you hurt yourself or someone else.
Oh, and thanks for keeping my fight against troll/******* like you at
the top of your groups! :-)
The only reason you write me is to try to put down my friends and my
Lord Jesus Christ. Well try as you may you're not strong enough for that,
coward.
BTW I put up a couple more of my friends cars for you to be jealous of.
:-)
I happen to know you've been locked in a rubber room, laced in a
straight jacket. Time for lights out at your insane asylum again.
Fortunately it is against the law for you to own a firearm.
There you go with that psychopathic goat obsession/fetish, that only
******* like would think of.
That's what I've said, it's common knowledge you're a schizophrenic
------.
Hehehe I've got your user name blocked over at: Motzarella, ***, and
soon the world of servers.
What are you babbling about?????
And you think the news members won't recognize your girlie writing, and
see your user names, as fake as you.
I used to pity retarded people like you, now you just make me
laugh!!!!!!
You pathetic little schizophrenic psychopath, you make me laugh the way
a girlie, ------ writes, it gives me a feeling of extreme superiority!
<ROTFLMAO>
And you think the news members won't catch on and be able to see your
pursuing *** names, as fake as you.
More jealous foul mouth girlie maricón acosador gibberish/babbling.
Forgery forwarded to: abuse@gmail.com, groups-abuse@google.com,
abuse@mchsi.com, fraud@mchsi.com, abuse@roadrunner.com
Path:
free.teranews.com!sam.nntpserver.com!nntpserver.co m!zeus.nntpserver.com!news
..glorb.com!postnews.google.com!57g2000hsv.googleg roups.com!not-for-mail
From: "L.W. (Bill) ------ III" <agung.sawadi@gmail.com>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: How to remove A/C lines at evaporator canister?
Date: Wed, 31 Oct 2007 19:36:54 -0000
Organization: http://groups.google.com
Lines: 77
Message-ID: <1193859414.084928.147360@57g2000hsv.googlegroups. com>
References: <bE4Wi.7031$BD.5038@trndny06>
NNTP-Posting-Host: 65.24.239.69
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Trace: posting.google.com 1193859414 32466 127.0.0.1 (31 Oct 2007 19:36:54
GMT)
X-Complaints-To: groups-abuse@google.com
NNTP-Posting-Date: Wed, 31 Oct 2007 19:36:54 +0000 (UTC)
In-Reply-To: <bE4Wi.7031$BD.5038@trndny06>
User-Agent: G2/1.0
X-HTTP-UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en-us)
AppleWebKit/312.8.1 (KHTML, like Gecko) Safari/312.6,gzip(gfe),gzip(gfe)
Complaints-To: groups-abuse@google.com
Injection-Info: 57g2000hsv.googlegroups.com; posting-host=65.24.239.69;
posting-account=ps2QrAMAAAA6_jCuRt2JEIpn5Otqf_w0
Xref: free.teranews.com rec.autos.makers.jeep+******:555391
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Terry Dactille©~®" <pterry@jurassholle_pork.org> wrote in message
news:4onhi3h5n04set0grisfkrmruqpbje8cl6@4ax.com...
>
> Truly an Idiot, In your 50 IQ delusional little primate mind you have
> SPAMED someone with a legitimate question, yes your spambot is working
> well moron.
>
over the fact that I once own a '37 Lasalle, ranting over my documents,
possessions, successes, manliness, Super Southern California surfer body,
Christian family, and name. What a jealous little draft dodging senile
coward from 12.205.158.32 AT&T WorldNet Services ATT, Mediacom
Communications Corp MEDIACOMCC-12-205-156-0-GULF-BREEZE-Florida, that of
course, I killed, now it's 12-202-247-159.client.mchsi.com New Albany,
Indiana asylum. It doesn't have a DD214, it had to have served our country
for that. Who's only way to get attention is to make a fool of its self,
with its goat obsession/fetish, where it writes via remailers, to no one's
surprise. Like when the other kids laughed at its attempt to use foul
language in elementary school play grounds, but its just gibberish. Too
senile to remember what he last wrote, like the rest of Florida. You remind
me of a little rat dog, like a Mexican Chiwawa with its senseless barking
it's rabid head off, me too, me too. And is too afraid to use your name,
address, or even sign your statement as any man would, totally worthless!
Posted pornography at: news:0u7g43dkje4pdkqi07hl66s8kpifo564k1@4ax.com
As a member of the moral majority I know what ---- is when I see it!
But now worth the time to forward this low life to: abuse@mchsi.com,
fraud@mchsi.com, fraud@4AX.COM, abuse@aioe.org, admin@***.net,
abuse@teranews.com for forgery.
I thought your attacks were just personal disagreements, but with
passing of my country's Independents Day, I realize these attacks are
stemming from my love of God and America, and that's what you've been doing
all along is declaring your hatred for the United States of America, with
each declaration of my signature, but just too cowardly to be a ---------.
It's America, love it, or leave it, so get the f*ck out!
Considering the source, which you're a habitual lair, so these plus your
other accusations would be thrown out of court.
When are you going to take responsibility for yourself, and become a
man??????????
People that follow astrology, know the traits you have listed are a
hundred eighty out from any Capricorn.
Forwarded to: alt.binaries.pictures.autos, alt.binaries.automobile.pictures
groups so they may to see what an a**hole you really are!!!!!
Is this what your Psychologist wrote about you? They don't fit any
Capricorn, sounds like a spoil Leo.
You're a LIAR and never been in the Service much less Vietnam, as you
suggest!!!!!
If you think I'm a Psycho, then report me to my friends at the San Diego
Sheriffs Department.
I'm just really curious as to who you think will believe you over any
man responsible enough to list his name and address here and in every place
I know of????? All you can do is lie, as most everything you have said
contradicts it's self.
You know what they say, once a ------ coward, always a ------ coward.
I won't give up until traitors like you are gone from these groups I
participate and see you've pretty well killed this group I will devote my
life to reminding your groups who you are!!!!!!!
I would appreciate the name and address of these trolls, Square Wheel:
S0106000ea6ba70e7.vn.shawcable.net 24.86.24.251 intrepidator@shaw.ca and
24bit:
12.205.158.32 AT&T WorldNet Services ATT Mediacom Communications Corp. I
will keep your name in confidence, kindly email -------------------- or
LW------@------.net
Sincerely,
Llewellyn W. (Bill) ------ III
You're not fooling anyone, ------! You need to get back in the hospital
before you hurt yourself or someone else.
Oh, and thanks for keeping my fight against troll/******* like you at
the top of your groups! :-)
The only reason you write me is to try to put down my friends and my
Lord Jesus Christ. Well try as you may you're not strong enough for that,
coward.
BTW I put up a couple more of my friends cars for you to be jealous of.
:-)
I happen to know you've been locked in a rubber room, laced in a
straight jacket. Time for lights out at your insane asylum again.
Fortunately it is against the law for you to own a firearm.
There you go with that psychopathic goat obsession/fetish, that only
******* like would think of.
That's what I've said, it's common knowledge you're a schizophrenic
------.
Hehehe I've got your user name blocked over at: Motzarella, ***, and
soon the world of servers.
What are you babbling about?????
And you think the news members won't recognize your girlie writing, and
see your user names, as fake as you.
I used to pity retarded people like you, now you just make me
laugh!!!!!!
You pathetic little schizophrenic psychopath, you make me laugh the way
a girlie, ------ writes, it gives me a feeling of extreme superiority!
<ROTFLMAO>
And you think the news members won't catch on and be able to see your
pursuing *** names, as fake as you.
More jealous foul mouth girlie maricón acosador gibberish/babbling.
Forgery forwarded to: abuse@gmail.com, groups-abuse@google.com,
abuse@mchsi.com, fraud@mchsi.com, abuse@roadrunner.com
Path:
free.teranews.com!sam.nntpserver.com!nntpserver.co m!zeus.nntpserver.com!news
..glorb.com!postnews.google.com!57g2000hsv.googleg roups.com!not-for-mail
From: "L.W. (Bill) ------ III" <agung.sawadi@gmail.com>
Newsgroups: rec.autos.makers.jeep+******
Subject: Re: How to remove A/C lines at evaporator canister?
Date: Wed, 31 Oct 2007 19:36:54 -0000
Organization: http://groups.google.com
Lines: 77
Message-ID: <1193859414.084928.147360@57g2000hsv.googlegroups. com>
References: <bE4Wi.7031$BD.5038@trndny06>
NNTP-Posting-Host: 65.24.239.69
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Trace: posting.google.com 1193859414 32466 127.0.0.1 (31 Oct 2007 19:36:54
GMT)
X-Complaints-To: groups-abuse@google.com
NNTP-Posting-Date: Wed, 31 Oct 2007 19:36:54 +0000 (UTC)
In-Reply-To: <bE4Wi.7031$BD.5038@trndny06>
User-Agent: G2/1.0
X-HTTP-UserAgent: Mozilla/5.0 (Macintosh; U; PPC Mac OS X; en-us)
AppleWebKit/312.8.1 (KHTML, like Gecko) Safari/312.6,gzip(gfe),gzip(gfe)
Complaints-To: groups-abuse@google.com
Injection-Info: 57g2000hsv.googlegroups.com; posting-host=65.24.239.69;
posting-account=ps2QrAMAAAA6_jCuRt2JEIpn5Otqf_w0
Xref: free.teranews.com rec.autos.makers.jeep+******:555391
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"Terry Dactille©~®" <pterry@jurassholle_pork.org> wrote in message
news:4onhi3h5n04set0grisfkrmruqpbje8cl6@4ax.com...
>
> Truly an Idiot, In your 50 IQ delusional little primate mind you have
> SPAMED someone with a legitimate question, yes your spambot is working
> well moron.
>