How exact should the spring leaf u-bolts be?
01-16-2004, 09:11 PM
#1
Guest
Posts: n/a
How exact should the spring leaf u-bolts be?
I am examining my lift kit and comparing the u-bolts with my stock ones.
The kit U-Bolts are about a half an inch wider than my stock ones so they
are not as snug as the stock ones. They do not "hug" the axle. Will this
work or should I use the stock ones (if they're long enough).
Thanks,
Bill
The kit U-Bolts are about a half an inch wider than my stock ones so they
are not as snug as the stock ones. They do not "hug" the axle. Will this
work or should I use the stock ones (if they're long enough).
Thanks,
Bill
01-16-2004, 09:25 PM
#2
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Don't use them, they are for the larger Dana 44 tubes.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I am examining my lift kit and comparing the u-bolts with my stock ones.
> The kit U-Bolts are about a half an inch wider than my stock ones so they
> are not as snug as the stock ones. They do not "hug" the axle. Will this
> work or should I use the stock ones (if they're long enough).
>
> Thanks,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I am examining my lift kit and comparing the u-bolts with my stock ones.
> The kit U-Bolts are about a half an inch wider than my stock ones so they
> are not as snug as the stock ones. They do not "hug" the axle. Will this
> work or should I use the stock ones (if they're long enough).
>
> Thanks,
>
> Bill
01-16-2004, 09:25 PM
#3
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Don't use them, they are for the larger Dana 44 tubes.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I am examining my lift kit and comparing the u-bolts with my stock ones.
> The kit U-Bolts are about a half an inch wider than my stock ones so they
> are not as snug as the stock ones. They do not "hug" the axle. Will this
> work or should I use the stock ones (if they're long enough).
>
> Thanks,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I am examining my lift kit and comparing the u-bolts with my stock ones.
> The kit U-Bolts are about a half an inch wider than my stock ones so they
> are not as snug as the stock ones. They do not "hug" the axle. Will this
> work or should I use the stock ones (if they're long enough).
>
> Thanks,
>
> Bill
01-16-2004, 09:25 PM
#4
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Don't use them, they are for the larger Dana 44 tubes.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I am examining my lift kit and comparing the u-bolts with my stock ones.
> The kit U-Bolts are about a half an inch wider than my stock ones so they
> are not as snug as the stock ones. They do not "hug" the axle. Will this
> work or should I use the stock ones (if they're long enough).
>
> Thanks,
>
> Bill
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/
William Oliveri wrote:
>
> I am examining my lift kit and comparing the u-bolts with my stock ones.
> The kit U-Bolts are about a half an inch wider than my stock ones so they
> are not as snug as the stock ones. They do not "hug" the axle. Will this
> work or should I use the stock ones (if they're long enough).
>
> Thanks,
>
> Bill
01-17-2004, 02:39 AM
#5
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Don't use your old ones either.... shell out a few bucks for the right size
or take your new ones to a spring shop and see if they will trade you.
-Brian
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40089D2E.87493A17@***.net...
: Don't use them, they are for the larger Dana 44 tubes.
: God Bless America, ßill O|||||||O
: mailto:-------------------- http://www.----------.com/
:
: William Oliveri wrote:
: >
: > I am examining my lift kit and comparing the u-bolts with my stock ones.
: > The kit U-Bolts are about a half an inch wider than my stock ones so
they
: > are not as snug as the stock ones. They do not "hug" the axle. Will
this
: > work or should I use the stock ones (if they're long enough).
: >
: > Thanks,
: >
: > Bill
or take your new ones to a spring shop and see if they will trade you.
-Brian
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40089D2E.87493A17@***.net...
: Don't use them, they are for the larger Dana 44 tubes.
: God Bless America, ßill O|||||||O
: mailto:-------------------- http://www.----------.com/
:
: William Oliveri wrote:
: >
: > I am examining my lift kit and comparing the u-bolts with my stock ones.
: > The kit U-Bolts are about a half an inch wider than my stock ones so
they
: > are not as snug as the stock ones. They do not "hug" the axle. Will
this
: > work or should I use the stock ones (if they're long enough).
: >
: > Thanks,
: >
: > Bill
01-17-2004, 02:39 AM
#6
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Don't use your old ones either.... shell out a few bucks for the right size
or take your new ones to a spring shop and see if they will trade you.
-Brian
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40089D2E.87493A17@***.net...
: Don't use them, they are for the larger Dana 44 tubes.
: God Bless America, ßill O|||||||O
: mailto:-------------------- http://www.----------.com/
:
: William Oliveri wrote:
: >
: > I am examining my lift kit and comparing the u-bolts with my stock ones.
: > The kit U-Bolts are about a half an inch wider than my stock ones so
they
: > are not as snug as the stock ones. They do not "hug" the axle. Will
this
: > work or should I use the stock ones (if they're long enough).
: >
: > Thanks,
: >
: > Bill
or take your new ones to a spring shop and see if they will trade you.
-Brian
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40089D2E.87493A17@***.net...
: Don't use them, they are for the larger Dana 44 tubes.
: God Bless America, ßill O|||||||O
: mailto:-------------------- http://www.----------.com/
:
: William Oliveri wrote:
: >
: > I am examining my lift kit and comparing the u-bolts with my stock ones.
: > The kit U-Bolts are about a half an inch wider than my stock ones so
they
: > are not as snug as the stock ones. They do not "hug" the axle. Will
this
: > work or should I use the stock ones (if they're long enough).
: >
: > Thanks,
: >
: > Bill
01-17-2004, 02:39 AM
#7
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Don't use your old ones either.... shell out a few bucks for the right size
or take your new ones to a spring shop and see if they will trade you.
-Brian
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40089D2E.87493A17@***.net...
: Don't use them, they are for the larger Dana 44 tubes.
: God Bless America, ßill O|||||||O
: mailto:-------------------- http://www.----------.com/
:
: William Oliveri wrote:
: >
: > I am examining my lift kit and comparing the u-bolts with my stock ones.
: > The kit U-Bolts are about a half an inch wider than my stock ones so
they
: > are not as snug as the stock ones. They do not "hug" the axle. Will
this
: > work or should I use the stock ones (if they're long enough).
: >
: > Thanks,
: >
: > Bill
or take your new ones to a spring shop and see if they will trade you.
-Brian
"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:40089D2E.87493A17@***.net...
: Don't use them, they are for the larger Dana 44 tubes.
: God Bless America, ßill O|||||||O
: mailto:-------------------- http://www.----------.com/
:
: William Oliveri wrote:
: >
: > I am examining my lift kit and comparing the u-bolts with my stock ones.
: > The kit U-Bolts are about a half an inch wider than my stock ones so
they
: > are not as snug as the stock ones. They do not "hug" the axle. Will
this
: > work or should I use the stock ones (if they're long enough).
: >
: > Thanks,
: >
: > Bill
01-17-2004, 02:50 AM
#8
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Where am I going to find the right sized ones? Go to the dealer for stock?
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:bF5Ob.62632$ZuL1.20897@twister01.bloor.is.net .cable.rogers.com...
> Don't use your old ones either.... shell out a few bucks for the right
size
> or take your new ones to a spring shop and see if they will trade you.
> -Brian
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40089D2E.87493A17@***.net...
> : Don't use them, they are for the larger Dana 44 tubes.
> : God Bless America, ßill O|||||||O
> : mailto:-------------------- http://www.----------.com/
> :
> : William Oliveri wrote:
> : >
> : > I am examining my lift kit and comparing the u-bolts with my stock
ones.
> : > The kit U-Bolts are about a half an inch wider than my stock ones so
> they
> : > are not as snug as the stock ones. They do not "hug" the axle. Will
> this
> : > work or should I use the stock ones (if they're long enough).
> : >
> : > Thanks,
> : >
> : > Bill
>
>
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:bF5Ob.62632$ZuL1.20897@twister01.bloor.is.net .cable.rogers.com...
> Don't use your old ones either.... shell out a few bucks for the right
size
> or take your new ones to a spring shop and see if they will trade you.
> -Brian
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40089D2E.87493A17@***.net...
> : Don't use them, they are for the larger Dana 44 tubes.
> : God Bless America, ßill O|||||||O
> : mailto:-------------------- http://www.----------.com/
> :
> : William Oliveri wrote:
> : >
> : > I am examining my lift kit and comparing the u-bolts with my stock
ones.
> : > The kit U-Bolts are about a half an inch wider than my stock ones so
> they
> : > are not as snug as the stock ones. They do not "hug" the axle. Will
> this
> : > work or should I use the stock ones (if they're long enough).
> : >
> : > Thanks,
> : >
> : > Bill
>
>
01-17-2004, 02:50 AM
#9
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Where am I going to find the right sized ones? Go to the dealer for stock?
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:bF5Ob.62632$ZuL1.20897@twister01.bloor.is.net .cable.rogers.com...
> Don't use your old ones either.... shell out a few bucks for the right
size
> or take your new ones to a spring shop and see if they will trade you.
> -Brian
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40089D2E.87493A17@***.net...
> : Don't use them, they are for the larger Dana 44 tubes.
> : God Bless America, ßill O|||||||O
> : mailto:-------------------- http://www.----------.com/
> :
> : William Oliveri wrote:
> : >
> : > I am examining my lift kit and comparing the u-bolts with my stock
ones.
> : > The kit U-Bolts are about a half an inch wider than my stock ones so
> they
> : > are not as snug as the stock ones. They do not "hug" the axle. Will
> this
> : > work or should I use the stock ones (if they're long enough).
> : >
> : > Thanks,
> : >
> : > Bill
>
>
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:bF5Ob.62632$ZuL1.20897@twister01.bloor.is.net .cable.rogers.com...
> Don't use your old ones either.... shell out a few bucks for the right
size
> or take your new ones to a spring shop and see if they will trade you.
> -Brian
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40089D2E.87493A17@***.net...
> : Don't use them, they are for the larger Dana 44 tubes.
> : God Bless America, ßill O|||||||O
> : mailto:-------------------- http://www.----------.com/
> :
> : William Oliveri wrote:
> : >
> : > I am examining my lift kit and comparing the u-bolts with my stock
ones.
> : > The kit U-Bolts are about a half an inch wider than my stock ones so
> they
> : > are not as snug as the stock ones. They do not "hug" the axle. Will
> this
> : > work or should I use the stock ones (if they're long enough).
> : >
> : > Thanks,
> : >
> : > Bill
>
>
01-17-2004, 02:50 AM
#10
Guest
Posts: n/a
Re: How exact should the spring leaf u-bolts be?
Where am I going to find the right sized ones? Go to the dealer for stock?
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:bF5Ob.62632$ZuL1.20897@twister01.bloor.is.net .cable.rogers.com...
> Don't use your old ones either.... shell out a few bucks for the right
size
> or take your new ones to a spring shop and see if they will trade you.
> -Brian
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40089D2E.87493A17@***.net...
> : Don't use them, they are for the larger Dana 44 tubes.
> : God Bless America, ßill O|||||||O
> : mailto:-------------------- http://www.----------.com/
> :
> : William Oliveri wrote:
> : >
> : > I am examining my lift kit and comparing the u-bolts with my stock
ones.
> : > The kit U-Bolts are about a half an inch wider than my stock ones so
> they
> : > are not as snug as the stock ones. They do not "hug" the axle. Will
> this
> : > work or should I use the stock ones (if they're long enough).
> : >
> : > Thanks,
> : >
> : > Bill
>
>
"Cherokee-LTD" <spammenot@home.com> wrote in message
news:bF5Ob.62632$ZuL1.20897@twister01.bloor.is.net .cable.rogers.com...
> Don't use your old ones either.... shell out a few bucks for the right
size
> or take your new ones to a spring shop and see if they will trade you.
> -Brian
>
> "L.W. (ßill) ------ III" <----------@***.net> wrote in message
> news:40089D2E.87493A17@***.net...
> : Don't use them, they are for the larger Dana 44 tubes.
> : God Bless America, ßill O|||||||O
> : mailto:-------------------- http://www.----------.com/
> :
> : William Oliveri wrote:
> : >
> : > I am examining my lift kit and comparing the u-bolts with my stock
ones.
> : > The kit U-Bolts are about a half an inch wider than my stock ones so
> they
> : > are not as snug as the stock ones. They do not "hug" the axle. Will
> this
> : > work or should I use the stock ones (if they're long enough).
> : >
> : > Thanks,
> : >
> : > Bill
>
>
