how do I wire this light bar to flash down the line
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Well, you need a controller with 12 outputs, and then you wire each bulb to
the controller so that it comes on at the right time.
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
the controller so that it comes on at the right time.
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Well, you need a controller with 12 outputs, and then you wire each bulb to
the controller so that it comes on at the right time.
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
the controller so that it comes on at the right time.
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Well, you need a controller with 12 outputs, and then you wire each bulb to
the controller so that it comes on at the right time.
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
the controller so that it comes on at the right time.
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
http://www.meter4it.com/Projects.htm
Or you get one of these and put some simple ladder logic in it:
http://www.ab.com/en/epub/catalogs/1...6481/tab2.html
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
<casper> wrote in message ...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Or you get one of these and put some simple ladder logic in it:
http://www.ab.com/en/epub/catalogs/1...6481/tab2.html
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
<casper> wrote in message ...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
http://www.meter4it.com/Projects.htm
Or you get one of these and put some simple ladder logic in it:
http://www.ab.com/en/epub/catalogs/1...6481/tab2.html
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
<casper> wrote in message ...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Or you get one of these and put some simple ladder logic in it:
http://www.ab.com/en/epub/catalogs/1...6481/tab2.html
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
<casper> wrote in message ...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
http://www.meter4it.com/Projects.htm
Or you get one of these and put some simple ladder logic in it:
http://www.ab.com/en/epub/catalogs/1...6481/tab2.html
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
<casper> wrote in message ...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Or you get one of these and put some simple ladder logic in it:
http://www.ab.com/en/epub/catalogs/1...6481/tab2.html
--
JimG
80' CJ-7 258 CID, HEI
4.56 Gears, Lock-Right F&R
35" BFG MT on 15x10 Centerlines
D44 Rear, D30 Front. SOA
Dana 300 w/4:1 & Currie twin sticks
Warn X8000i w/ dual batteries
00' TJ Sport 4.0L, 5sp
4.56 Gears, TrueTrac rear
33" BFG AT on 15x8 Eagle Alloys
D35 Rear, D30 Front. 3" Suspension Lift
Warn X8000i
<casper> wrote in message ...
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
>
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Dude! Using YOUR definition of a Real Jeep, I'd have to dump CRWLR for a
4-banger with the gas tank under the driver seat.
I'll stick with my fuel injected 258, front and rear lockers, heavy duty
hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
32x11.50s. Thank you very much.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:43E58331.C7760EB@***.net...
> I'll believe it when you trade that thing in for a Real Jeep. ;-)
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "KJ.Kate" wrote:
>>
>> There are some outfits that sell sequential light systems for the
>> Mustangs.
>> You might have a look at something along those lines.
>> BUT
>> Like Bill says, you have to pass going through the scales or an
>> inspection
>> and you should know better than anyone what some ambitious cops will do.
>>
>> You may want to listen to Bill
>> ( I cannot believe I just said that, Bill, you better print it out and
>> frame
>> it! LOL)
>>
>> KJK
4-banger with the gas tank under the driver seat.
I'll stick with my fuel injected 258, front and rear lockers, heavy duty
hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
32x11.50s. Thank you very much.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:43E58331.C7760EB@***.net...
> I'll believe it when you trade that thing in for a Real Jeep. ;-)
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "KJ.Kate" wrote:
>>
>> There are some outfits that sell sequential light systems for the
>> Mustangs.
>> You might have a look at something along those lines.
>> BUT
>> Like Bill says, you have to pass going through the scales or an
>> inspection
>> and you should know better than anyone what some ambitious cops will do.
>>
>> You may want to listen to Bill
>> ( I cannot believe I just said that, Bill, you better print it out and
>> frame
>> it! LOL)
>>
>> KJK
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Dude! Using YOUR definition of a Real Jeep, I'd have to dump CRWLR for a
4-banger with the gas tank under the driver seat.
I'll stick with my fuel injected 258, front and rear lockers, heavy duty
hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
32x11.50s. Thank you very much.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:43E58331.C7760EB@***.net...
> I'll believe it when you trade that thing in for a Real Jeep. ;-)
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "KJ.Kate" wrote:
>>
>> There are some outfits that sell sequential light systems for the
>> Mustangs.
>> You might have a look at something along those lines.
>> BUT
>> Like Bill says, you have to pass going through the scales or an
>> inspection
>> and you should know better than anyone what some ambitious cops will do.
>>
>> You may want to listen to Bill
>> ( I cannot believe I just said that, Bill, you better print it out and
>> frame
>> it! LOL)
>>
>> KJK
4-banger with the gas tank under the driver seat.
I'll stick with my fuel injected 258, front and rear lockers, heavy duty
hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
32x11.50s. Thank you very much.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:43E58331.C7760EB@***.net...
> I'll believe it when you trade that thing in for a Real Jeep. ;-)
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "KJ.Kate" wrote:
>>
>> There are some outfits that sell sequential light systems for the
>> Mustangs.
>> You might have a look at something along those lines.
>> BUT
>> Like Bill says, you have to pass going through the scales or an
>> inspection
>> and you should know better than anyone what some ambitious cops will do.
>>
>> You may want to listen to Bill
>> ( I cannot believe I just said that, Bill, you better print it out and
>> frame
>> it! LOL)
>>
>> KJK
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Dude! Using YOUR definition of a Real Jeep, I'd have to dump CRWLR for a
4-banger with the gas tank under the driver seat.
I'll stick with my fuel injected 258, front and rear lockers, heavy duty
hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
32x11.50s. Thank you very much.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:43E58331.C7760EB@***.net...
> I'll believe it when you trade that thing in for a Real Jeep. ;-)
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "KJ.Kate" wrote:
>>
>> There are some outfits that sell sequential light systems for the
>> Mustangs.
>> You might have a look at something along those lines.
>> BUT
>> Like Bill says, you have to pass going through the scales or an
>> inspection
>> and you should know better than anyone what some ambitious cops will do.
>>
>> You may want to listen to Bill
>> ( I cannot believe I just said that, Bill, you better print it out and
>> frame
>> it! LOL)
>>
>> KJK
4-banger with the gas tank under the driver seat.
I'll stick with my fuel injected 258, front and rear lockers, heavy duty
hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
32x11.50s. Thank you very much.
"L.W. ("ßill") ------ III" <----------@***.net> wrote in message
news:43E58331.C7760EB@***.net...
> I'll believe it when you trade that thing in for a Real Jeep. ;-)
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> "KJ.Kate" wrote:
>>
>> There are some outfits that sell sequential light systems for the
>> Mustangs.
>> You might have a look at something along those lines.
>> BUT
>> Like Bill says, you have to pass going through the scales or an
>> inspection
>> and you should know better than anyone what some ambitious cops will do.
>>
>> You may want to listen to Bill
>> ( I cannot believe I just said that, Bill, you better print it out and
>> frame
>> it! LOL)
>>
>> KJK
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Jeff, you know Bill's stuck in the 1960's.
Jim Smith
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:npWdnZ6IIcsP3HveRVn-sg@ez2.net...
> Dude! Using YOUR definition of a Real Jeep, I'd have to dump CRWLR for a
> 4-banger with the gas tank under the driver seat.
>
> I'll stick with my fuel injected 258, front and rear lockers, heavy duty
> hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
> 32x11.50s. Thank you very much.
>
>
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:43E58331.C7760EB@***.net...
>> I'll believe it when you trade that thing in for a Real Jeep. ;-)
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> "KJ.Kate" wrote:
>>>
>>> There are some outfits that sell sequential light systems for the
>>> Mustangs.
>>> You might have a look at something along those lines.
>>> BUT
>>> Like Bill says, you have to pass going through the scales or an
>>> inspection
>>> and you should know better than anyone what some ambitious cops will do.
>>>
>>> You may want to listen to Bill
>>> ( I cannot believe I just said that, Bill, you better print it out and
>>> frame
>>> it! LOL)
>>>
>>> KJK
>
Jim Smith
"Jeff Strickland" <crwlr@yahoo.com> wrote in message
news:npWdnZ6IIcsP3HveRVn-sg@ez2.net...
> Dude! Using YOUR definition of a Real Jeep, I'd have to dump CRWLR for a
> 4-banger with the gas tank under the driver seat.
>
> I'll stick with my fuel injected 258, front and rear lockers, heavy duty
> hubs, NP435 trans, and twin-stick equipped D300 turning 4.10 gears and
> 32x11.50s. Thank you very much.
>
>
>
>
> "L.W. ("ßill") ------ III" <----------@***.net> wrote in message
> news:43E58331.C7760EB@***.net...
>> I'll believe it when you trade that thing in for a Real Jeep. ;-)
>> God Bless America, Bill O|||||||O
>> mailto:-------------------- http://www.----------.com/
>>
>> "KJ.Kate" wrote:
>>>
>>> There are some outfits that sell sequential light systems for the
>>> Mustangs.
>>> You might have a look at something along those lines.
>>> BUT
>>> Like Bill says, you have to pass going through the scales or an
>>> inspection
>>> and you should know better than anyone what some ambitious cops will do.
>>>
>>> You may want to listen to Bill
>>> ( I cannot believe I just said that, Bill, you better print it out and
>>> frame
>>> it! LOL)
>>>
>>> KJK
>
