how do I wire this light bar to flash down the line
02-04-2006, 11:11 PM
#1
Guest
Posts: n/a
how do I wire this light bar to flash down the line
well I have a semi truck and a light bar with 12 marker lights in the
bumper I am going to wire them 6 and 6 so when I turn on the turn
signal they flash the right way 6 will flash right and 6 will flash
left I would like to go further and make them flash in a seires
1,2,3,4,5,6, how do I do this. what relays do i need and or anything
eles I would like them to start to flash in the center at number 6 and
flash one at a time down to 1 and work there way to the out side of
the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
<<<<<< >>>>>>
left side right side thank you
if any one can help!!!!
bumper I am going to wire them 6 and 6 so when I turn on the turn
signal they flash the right way 6 will flash right and 6 will flash
left I would like to go further and make them flash in a seires
1,2,3,4,5,6, how do I do this. what relays do i need and or anything
eles I would like them to start to flash in the center at number 6 and
flash one at a time down to 1 and work there way to the out side of
the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
<<<<<< >>>>>>
left side right side thank you
if any one can help!!!!
02-04-2006, 11:34 PM
#2
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Be aware anything you put on must work when you go though the
scales. You will have to use a flasher like used in the sixties high end
Fords, and Mercury Cougars, and of course design a harness that connects
each set of lights in an sequential order.
http://www.thuntek.net/cougars_unlimited/69seqts.htm I WOULDN'T DO IT!
Not if you have truck payments to make!
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
casper_3270@yahoo.com wrote:
>
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
scales. You will have to use a flasher like used in the sixties high end
Fords, and Mercury Cougars, and of course design a harness that connects
each set of lights in an sequential order.
http://www.thuntek.net/cougars_unlimited/69seqts.htm I WOULDN'T DO IT!
Not if you have truck payments to make!
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
casper_3270@yahoo.com wrote:
>
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
02-04-2006, 11:34 PM
#3
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Be aware anything you put on must work when you go though the
scales. You will have to use a flasher like used in the sixties high end
Fords, and Mercury Cougars, and of course design a harness that connects
each set of lights in an sequential order.
http://www.thuntek.net/cougars_unlimited/69seqts.htm I WOULDN'T DO IT!
Not if you have truck payments to make!
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
casper_3270@yahoo.com wrote:
>
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
scales. You will have to use a flasher like used in the sixties high end
Fords, and Mercury Cougars, and of course design a harness that connects
each set of lights in an sequential order.
http://www.thuntek.net/cougars_unlimited/69seqts.htm I WOULDN'T DO IT!
Not if you have truck payments to make!
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
casper_3270@yahoo.com wrote:
>
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
02-04-2006, 11:34 PM
#4
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
Be aware anything you put on must work when you go though the
scales. You will have to use a flasher like used in the sixties high end
Fords, and Mercury Cougars, and of course design a harness that connects
each set of lights in an sequential order.
http://www.thuntek.net/cougars_unlimited/69seqts.htm I WOULDN'T DO IT!
Not if you have truck payments to make!
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
casper_3270@yahoo.com wrote:
>
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
scales. You will have to use a flasher like used in the sixties high end
Fords, and Mercury Cougars, and of course design a harness that connects
each set of lights in an sequential order.
http://www.thuntek.net/cougars_unlimited/69seqts.htm I WOULDN'T DO IT!
Not if you have truck payments to make!
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
casper_3270@yahoo.com wrote:
>
> well I have a semi truck and a light bar with 12 marker lights in the
> bumper I am going to wire them 6 and 6 so when I turn on the turn
> signal they flash the right way 6 will flash right and 6 will flash
> left I would like to go further and make them flash in a seires
> 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
> eles I would like them to start to flash in the center at number 6 and
> flash one at a time down to 1 and work there way to the out side of
> the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
> <<<<<< >>>>>>
> left side right side thank you
> if any one can help!!!!
02-04-2006, 11:41 PM
#5
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
There are some outfits that sell sequential light systems for the Mustangs.
You might have a look at something along those lines.
BUT
Like Bill says, you have to pass going through the scales or an inspection
and you should know better than anyone what some ambitious cops will do.
You may want to listen to Bill
( I cannot believe I just said that, Bill, you better print it out and frame
it! LOL)
KJK
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
: well I have a semi truck and a light bar with 12 marker lights in the
: bumper I am going to wire them 6 and 6 so when I turn on the turn
: signal they flash the right way 6 will flash right and 6 will flash
: left I would like to go further and make them flash in a seires
: 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
: eles I would like them to start to flash in the center at number 6 and
: flash one at a time down to 1 and work there way to the out side of
: the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
: <<<<<< >>>>>>
: left side right side thank you
: if any one can help!!!!
:
You might have a look at something along those lines.
BUT
Like Bill says, you have to pass going through the scales or an inspection
and you should know better than anyone what some ambitious cops will do.
You may want to listen to Bill
( I cannot believe I just said that, Bill, you better print it out and frame
it! LOL)
KJK
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
: well I have a semi truck and a light bar with 12 marker lights in the
: bumper I am going to wire them 6 and 6 so when I turn on the turn
: signal they flash the right way 6 will flash right and 6 will flash
: left I would like to go further and make them flash in a seires
: 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
: eles I would like them to start to flash in the center at number 6 and
: flash one at a time down to 1 and work there way to the out side of
: the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
: <<<<<< >>>>>>
: left side right side thank you
: if any one can help!!!!
:
02-04-2006, 11:41 PM
#6
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
There are some outfits that sell sequential light systems for the Mustangs.
You might have a look at something along those lines.
BUT
Like Bill says, you have to pass going through the scales or an inspection
and you should know better than anyone what some ambitious cops will do.
You may want to listen to Bill
( I cannot believe I just said that, Bill, you better print it out and frame
it! LOL)
KJK
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
: well I have a semi truck and a light bar with 12 marker lights in the
: bumper I am going to wire them 6 and 6 so when I turn on the turn
: signal they flash the right way 6 will flash right and 6 will flash
: left I would like to go further and make them flash in a seires
: 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
: eles I would like them to start to flash in the center at number 6 and
: flash one at a time down to 1 and work there way to the out side of
: the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
: <<<<<< >>>>>>
: left side right side thank you
: if any one can help!!!!
:
You might have a look at something along those lines.
BUT
Like Bill says, you have to pass going through the scales or an inspection
and you should know better than anyone what some ambitious cops will do.
You may want to listen to Bill
( I cannot believe I just said that, Bill, you better print it out and frame
it! LOL)
KJK
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
: well I have a semi truck and a light bar with 12 marker lights in the
: bumper I am going to wire them 6 and 6 so when I turn on the turn
: signal they flash the right way 6 will flash right and 6 will flash
: left I would like to go further and make them flash in a seires
: 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
: eles I would like them to start to flash in the center at number 6 and
: flash one at a time down to 1 and work there way to the out side of
: the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
: <<<<<< >>>>>>
: left side right side thank you
: if any one can help!!!!
:
02-04-2006, 11:41 PM
#7
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
There are some outfits that sell sequential light systems for the Mustangs.
You might have a look at something along those lines.
BUT
Like Bill says, you have to pass going through the scales or an inspection
and you should know better than anyone what some ambitious cops will do.
You may want to listen to Bill
( I cannot believe I just said that, Bill, you better print it out and frame
it! LOL)
KJK
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
: well I have a semi truck and a light bar with 12 marker lights in the
: bumper I am going to wire them 6 and 6 so when I turn on the turn
: signal they flash the right way 6 will flash right and 6 will flash
: left I would like to go further and make them flash in a seires
: 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
: eles I would like them to start to flash in the center at number 6 and
: flash one at a time down to 1 and work there way to the out side of
: the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
: <<<<<< >>>>>>
: left side right side thank you
: if any one can help!!!!
:
You might have a look at something along those lines.
BUT
Like Bill says, you have to pass going through the scales or an inspection
and you should know better than anyone what some ambitious cops will do.
You may want to listen to Bill
( I cannot believe I just said that, Bill, you better print it out and frame
it! LOL)
KJK
<casper_3270@yahoo.com> wrote in message
news:1139112692.648766.188460@g44g2000cwa.googlegr oups.com...
: well I have a semi truck and a light bar with 12 marker lights in the
: bumper I am going to wire them 6 and 6 so when I turn on the turn
: signal they flash the right way 6 will flash right and 6 will flash
: left I would like to go further and make them flash in a seires
: 1,2,3,4,5,6, how do I do this. what relays do i need and or anything
: eles I would like them to start to flash in the center at number 6 and
: flash one at a time down to 1 and work there way to the out side of
: the bar so it would be 1,2,3,4,5,6 6,5,4,3,2,1,and start over again.
: <<<<<< >>>>>>
: left side right side thank you
: if any one can help!!!!
:
02-04-2006, 11:46 PM
#8
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
I'll believe it when you trade that thing in for a Real Jeep. ;-)
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"KJ.Kate" wrote:
>
> There are some outfits that sell sequential light systems for the Mustangs.
> You might have a look at something along those lines.
> BUT
> Like Bill says, you have to pass going through the scales or an inspection
> and you should know better than anyone what some ambitious cops will do.
>
> You may want to listen to Bill
> ( I cannot believe I just said that, Bill, you better print it out and frame
> it! LOL)
>
> KJK
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"KJ.Kate" wrote:
>
> There are some outfits that sell sequential light systems for the Mustangs.
> You might have a look at something along those lines.
> BUT
> Like Bill says, you have to pass going through the scales or an inspection
> and you should know better than anyone what some ambitious cops will do.
>
> You may want to listen to Bill
> ( I cannot believe I just said that, Bill, you better print it out and frame
> it! LOL)
>
> KJK
02-04-2006, 11:46 PM
#9
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
I'll believe it when you trade that thing in for a Real Jeep. ;-)
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"KJ.Kate" wrote:
>
> There are some outfits that sell sequential light systems for the Mustangs.
> You might have a look at something along those lines.
> BUT
> Like Bill says, you have to pass going through the scales or an inspection
> and you should know better than anyone what some ambitious cops will do.
>
> You may want to listen to Bill
> ( I cannot believe I just said that, Bill, you better print it out and frame
> it! LOL)
>
> KJK
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"KJ.Kate" wrote:
>
> There are some outfits that sell sequential light systems for the Mustangs.
> You might have a look at something along those lines.
> BUT
> Like Bill says, you have to pass going through the scales or an inspection
> and you should know better than anyone what some ambitious cops will do.
>
> You may want to listen to Bill
> ( I cannot believe I just said that, Bill, you better print it out and frame
> it! LOL)
>
> KJK
02-04-2006, 11:46 PM
#10
Guest
Posts: n/a
Re: how do I wire this light bar to flash down the line
I'll believe it when you trade that thing in for a Real Jeep. ;-)
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"KJ.Kate" wrote:
>
> There are some outfits that sell sequential light systems for the Mustangs.
> You might have a look at something along those lines.
> BUT
> Like Bill says, you have to pass going through the scales or an inspection
> and you should know better than anyone what some ambitious cops will do.
>
> You may want to listen to Bill
> ( I cannot believe I just said that, Bill, you better print it out and frame
> it! LOL)
>
> KJK
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/
"KJ.Kate" wrote:
>
> There are some outfits that sell sequential light systems for the Mustangs.
> You might have a look at something along those lines.
> BUT
> Like Bill says, you have to pass going through the scales or an inspection
> and you should know better than anyone what some ambitious cops will do.
>
> You may want to listen to Bill
> ( I cannot believe I just said that, Bill, you better print it out and frame
> it! LOL)
>
> KJK
