how to disassemble cherokee doors?
01-07-2005, 08:08 PM
#1
Guest
Posts: n/a
how to disassemble cherokee doors?
I'm looking to take care of some things in my doors, like ease sticky
locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
anybody help me out with detailed directions on taking apart the doors?
TIA
B
--
Brian Heller
It is easier to tame wild beasts
than to conquer the human mind.
locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
anybody help me out with detailed directions on taking apart the doors?
TIA
B
--
Brian Heller
It is easier to tame wild beasts
than to conquer the human mind.
01-08-2005, 12:17 PM
#2
Guest
Posts: n/a
Re: how to disassemble cherokee doors?
I can help on removing the door panles. First there's two screws in the arm
rest. Remove them. Then there's 3 screws in the chrome/plastic part around
the door lock, remove them. Now it gets fun. Pull out on the bottom of the
door panel and the plastic clips will pop out. They go along the sides and
bottom. Now you must slide the captive top part rearward so it will clear
the rear view mirror **** plate. Two inches maybe. Then lift it up and off
the grove on the top. Now your left with the door **** holding you up. Two
ways to go here. One is to pop off the plastic clips holding the two rods.
Second is to gently work it through the hole in the door panel. It can be
done just take your time and be carefull not to crack it.
JoBo
"Brian" <b_heller@earthlink.net> wrote in message
news:b_heller-B8653D.20123107012005@news.verizon.net...
> I'm looking to take care of some things in my doors, like ease sticky
> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
> anybody help me out with detailed directions on taking apart the doors?
> TIA
>
> B
>
> --
> Brian Heller
>
> It is easier to tame wild beasts
> than to conquer the human mind.
rest. Remove them. Then there's 3 screws in the chrome/plastic part around
the door lock, remove them. Now it gets fun. Pull out on the bottom of the
door panel and the plastic clips will pop out. They go along the sides and
bottom. Now you must slide the captive top part rearward so it will clear
the rear view mirror **** plate. Two inches maybe. Then lift it up and off
the grove on the top. Now your left with the door **** holding you up. Two
ways to go here. One is to pop off the plastic clips holding the two rods.
Second is to gently work it through the hole in the door panel. It can be
done just take your time and be carefull not to crack it.
JoBo
"Brian" <b_heller@earthlink.net> wrote in message
news:b_heller-B8653D.20123107012005@news.verizon.net...
> I'm looking to take care of some things in my doors, like ease sticky
> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
> anybody help me out with detailed directions on taking apart the doors?
> TIA
>
> B
>
> --
> Brian Heller
>
> It is easier to tame wild beasts
> than to conquer the human mind.
01-08-2005, 12:17 PM
#3
Guest
Posts: n/a
Re: how to disassemble cherokee doors?
I can help on removing the door panles. First there's two screws in the arm
rest. Remove them. Then there's 3 screws in the chrome/plastic part around
the door lock, remove them. Now it gets fun. Pull out on the bottom of the
door panel and the plastic clips will pop out. They go along the sides and
bottom. Now you must slide the captive top part rearward so it will clear
the rear view mirror **** plate. Two inches maybe. Then lift it up and off
the grove on the top. Now your left with the door **** holding you up. Two
ways to go here. One is to pop off the plastic clips holding the two rods.
Second is to gently work it through the hole in the door panel. It can be
done just take your time and be carefull not to crack it.
JoBo
"Brian" <b_heller@earthlink.net> wrote in message
news:b_heller-B8653D.20123107012005@news.verizon.net...
> I'm looking to take care of some things in my doors, like ease sticky
> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
> anybody help me out with detailed directions on taking apart the doors?
> TIA
>
> B
>
> --
> Brian Heller
>
> It is easier to tame wild beasts
> than to conquer the human mind.
rest. Remove them. Then there's 3 screws in the chrome/plastic part around
the door lock, remove them. Now it gets fun. Pull out on the bottom of the
door panel and the plastic clips will pop out. They go along the sides and
bottom. Now you must slide the captive top part rearward so it will clear
the rear view mirror **** plate. Two inches maybe. Then lift it up and off
the grove on the top. Now your left with the door **** holding you up. Two
ways to go here. One is to pop off the plastic clips holding the two rods.
Second is to gently work it through the hole in the door panel. It can be
done just take your time and be carefull not to crack it.
JoBo
"Brian" <b_heller@earthlink.net> wrote in message
news:b_heller-B8653D.20123107012005@news.verizon.net...
> I'm looking to take care of some things in my doors, like ease sticky
> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
> anybody help me out with detailed directions on taking apart the doors?
> TIA
>
> B
>
> --
> Brian Heller
>
> It is easier to tame wild beasts
> than to conquer the human mind.
01-08-2005, 12:17 PM
#4
Guest
Posts: n/a
Re: how to disassemble cherokee doors?
I can help on removing the door panles. First there's two screws in the arm
rest. Remove them. Then there's 3 screws in the chrome/plastic part around
the door lock, remove them. Now it gets fun. Pull out on the bottom of the
door panel and the plastic clips will pop out. They go along the sides and
bottom. Now you must slide the captive top part rearward so it will clear
the rear view mirror **** plate. Two inches maybe. Then lift it up and off
the grove on the top. Now your left with the door **** holding you up. Two
ways to go here. One is to pop off the plastic clips holding the two rods.
Second is to gently work it through the hole in the door panel. It can be
done just take your time and be carefull not to crack it.
JoBo
"Brian" <b_heller@earthlink.net> wrote in message
news:b_heller-B8653D.20123107012005@news.verizon.net...
> I'm looking to take care of some things in my doors, like ease sticky
> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
> anybody help me out with detailed directions on taking apart the doors?
> TIA
>
> B
>
> --
> Brian Heller
>
> It is easier to tame wild beasts
> than to conquer the human mind.
rest. Remove them. Then there's 3 screws in the chrome/plastic part around
the door lock, remove them. Now it gets fun. Pull out on the bottom of the
door panel and the plastic clips will pop out. They go along the sides and
bottom. Now you must slide the captive top part rearward so it will clear
the rear view mirror **** plate. Two inches maybe. Then lift it up and off
the grove on the top. Now your left with the door **** holding you up. Two
ways to go here. One is to pop off the plastic clips holding the two rods.
Second is to gently work it through the hole in the door panel. It can be
done just take your time and be carefull not to crack it.
JoBo
"Brian" <b_heller@earthlink.net> wrote in message
news:b_heller-B8653D.20123107012005@news.verizon.net...
> I'm looking to take care of some things in my doors, like ease sticky
> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
> anybody help me out with detailed directions on taking apart the doors?
> TIA
>
> B
>
> --
> Brian Heller
>
> It is easier to tame wild beasts
> than to conquer the human mind.
01-08-2005, 12:34 PM
#5
Guest
Posts: n/a
Re: how to disassemble cherokee doors?
Jo Bo did pass the time by typing:
> I can help on removing the door panles. First there's two screws in the arm
> rest. Remove them. Then there's 3 screws in the chrome/plastic part around
> the door lock, remove them. Now it gets fun. Pull out on the bottom of the
> door panel and the plastic clips will pop out. They go along the sides and
> bottom. Now you must slide the captive top part rearward so it will clear
> the rear view mirror **** plate. Two inches maybe. Then lift it up and off
> the grove on the top. Now your left with the door **** holding you up. Two
> ways to go here. One is to pop off the plastic clips holding the two rods.
> Second is to gently work it through the hole in the door panel. It can be
> done just take your time and be carefull not to crack it.
Just a little note.. When you work around plastic body parts, use gloves.
Those edges can be razor sharp. I've cut myself several times taking door
panels and pillar covers off.
> "Brian" wrote ...
>> I'm looking to take care of some things in my doors, like ease sticky
>> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
>> anybody help me out with detailed directions on taking apart the doors?
>> TIA
> I can help on removing the door panles. First there's two screws in the arm
> rest. Remove them. Then there's 3 screws in the chrome/plastic part around
> the door lock, remove them. Now it gets fun. Pull out on the bottom of the
> door panel and the plastic clips will pop out. They go along the sides and
> bottom. Now you must slide the captive top part rearward so it will clear
> the rear view mirror **** plate. Two inches maybe. Then lift it up and off
> the grove on the top. Now your left with the door **** holding you up. Two
> ways to go here. One is to pop off the plastic clips holding the two rods.
> Second is to gently work it through the hole in the door panel. It can be
> done just take your time and be carefull not to crack it.
Just a little note.. When you work around plastic body parts, use gloves.
Those edges can be razor sharp. I've cut myself several times taking door
panels and pillar covers off.
> "Brian" wrote ...
>> I'm looking to take care of some things in my doors, like ease sticky
>> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
>> anybody help me out with detailed directions on taking apart the doors?
>> TIA
01-08-2005, 12:34 PM
#6
Guest
Posts: n/a
Re: how to disassemble cherokee doors?
Jo Bo did pass the time by typing:
> I can help on removing the door panles. First there's two screws in the arm
> rest. Remove them. Then there's 3 screws in the chrome/plastic part around
> the door lock, remove them. Now it gets fun. Pull out on the bottom of the
> door panel and the plastic clips will pop out. They go along the sides and
> bottom. Now you must slide the captive top part rearward so it will clear
> the rear view mirror **** plate. Two inches maybe. Then lift it up and off
> the grove on the top. Now your left with the door **** holding you up. Two
> ways to go here. One is to pop off the plastic clips holding the two rods.
> Second is to gently work it through the hole in the door panel. It can be
> done just take your time and be carefull not to crack it.
Just a little note.. When you work around plastic body parts, use gloves.
Those edges can be razor sharp. I've cut myself several times taking door
panels and pillar covers off.
> "Brian" wrote ...
>> I'm looking to take care of some things in my doors, like ease sticky
>> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
>> anybody help me out with detailed directions on taking apart the doors?
>> TIA
> I can help on removing the door panles. First there's two screws in the arm
> rest. Remove them. Then there's 3 screws in the chrome/plastic part around
> the door lock, remove them. Now it gets fun. Pull out on the bottom of the
> door panel and the plastic clips will pop out. They go along the sides and
> bottom. Now you must slide the captive top part rearward so it will clear
> the rear view mirror **** plate. Two inches maybe. Then lift it up and off
> the grove on the top. Now your left with the door **** holding you up. Two
> ways to go here. One is to pop off the plastic clips holding the two rods.
> Second is to gently work it through the hole in the door panel. It can be
> done just take your time and be carefull not to crack it.
Just a little note.. When you work around plastic body parts, use gloves.
Those edges can be razor sharp. I've cut myself several times taking door
panels and pillar covers off.
> "Brian" wrote ...
>> I'm looking to take care of some things in my doors, like ease sticky
>> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
>> anybody help me out with detailed directions on taking apart the doors?
>> TIA
01-08-2005, 12:34 PM
#7
Guest
Posts: n/a
Re: how to disassemble cherokee doors?
Jo Bo did pass the time by typing:
> I can help on removing the door panles. First there's two screws in the arm
> rest. Remove them. Then there's 3 screws in the chrome/plastic part around
> the door lock, remove them. Now it gets fun. Pull out on the bottom of the
> door panel and the plastic clips will pop out. They go along the sides and
> bottom. Now you must slide the captive top part rearward so it will clear
> the rear view mirror **** plate. Two inches maybe. Then lift it up and off
> the grove on the top. Now your left with the door **** holding you up. Two
> ways to go here. One is to pop off the plastic clips holding the two rods.
> Second is to gently work it through the hole in the door panel. It can be
> done just take your time and be carefull not to crack it.
Just a little note.. When you work around plastic body parts, use gloves.
Those edges can be razor sharp. I've cut myself several times taking door
panels and pillar covers off.
> "Brian" wrote ...
>> I'm looking to take care of some things in my doors, like ease sticky
>> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
>> anybody help me out with detailed directions on taking apart the doors?
>> TIA
> I can help on removing the door panles. First there's two screws in the arm
> rest. Remove them. Then there's 3 screws in the chrome/plastic part around
> the door lock, remove them. Now it gets fun. Pull out on the bottom of the
> door panel and the plastic clips will pop out. They go along the sides and
> bottom. Now you must slide the captive top part rearward so it will clear
> the rear view mirror **** plate. Two inches maybe. Then lift it up and off
> the grove on the top. Now your left with the door **** holding you up. Two
> ways to go here. One is to pop off the plastic clips holding the two rods.
> Second is to gently work it through the hole in the door panel. It can be
> done just take your time and be carefull not to crack it.
Just a little note.. When you work around plastic body parts, use gloves.
Those edges can be razor sharp. I've cut myself several times taking door
panels and pillar covers off.
> "Brian" wrote ...
>> I'm looking to take care of some things in my doors, like ease sticky
>> locks & replace window seals on my 96 XJ. I don't have a FSM yet, so can
>> anybody help me out with detailed directions on taking apart the doors?
>> TIA
Thread
Thread Starter
Forum
Replies
Last Post
torque63@gmail.com
Jeep Mailing List
0
01-13-2008 04:17 PM
mgriff4752@gmail.com
Jeep Mailing List
15
02-24-2007 05:01 PM
molotovfx@netscape.net
Jeep Mailing List
4
04-20-2005 01:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)