I can't see a good picture at Hansen Styling Parts, but if it works how I
think it does, it has a hole top and bottom in the body, and a lever
attached to the lock. You turn the lock so the lever is out of the way,
slide the whole thing onto the bonnet ( hood in US parlance) central through
the two holes and turn the lock to stop it falling off. The net effect is to
prevent you from moving the central catch backwards.

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Patrick" <billardpatrick@wanadoo.fr> wrote in message
news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
plate
> is Hansen Styling Parts.
> Photo attached.
> Regards
>
> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
> > how about a picture of it, and telling us who manufactured it !
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
> >> Hi,
> >> I received a hood lock which i ordered from a german "on line supplier"
> >> without any instruction (p/n 1521.21).
> >> I just can't figure out how to install this lock !
> >> I looked at every sides, up , down, all around and it still remains a
> >> mistery.
> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
> >> Thanks for your help.
> >> Patrick
> >>
> >>
> >
> >
>
>
>
>
>
>
>

 

I can't see a good picture at Hansen Styling Parts, but if it works how I
think it does, it has a hole top and bottom in the body, and a lever
attached to the lock. You turn the lock so the lever is out of the way,
slide the whole thing onto the bonnet ( hood in US parlance) central through
the two holes and turn the lock to stop it falling off. The net effect is to
prevent you from moving the central catch backwards.

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Patrick" <billardpatrick@wanadoo.fr> wrote in message
news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
plate
> is Hansen Styling Parts.
> Photo attached.
> Regards
>
> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
> > how about a picture of it, and telling us who manufactured it !
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
> >> Hi,
> >> I received a hood lock which i ordered from a german "on line supplier"
> >> without any instruction (p/n 1521.21).
> >> I just can't figure out how to install this lock !
> >> I looked at every sides, up , down, all around and it still remains a
> >> mistery.
> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
> >> Thanks for your help.
> >> Patrick
> >>
> >>
> >
> >
>
>
>
>
>
>
>

 

I can't see a good picture at Hansen Styling Parts, but if it works how I
think it does, it has a hole top and bottom in the body, and a lever
attached to the lock. You turn the lock so the lever is out of the way,
slide the whole thing onto the bonnet ( hood in US parlance) central through
the two holes and turn the lock to stop it falling off. The net effect is to
prevent you from moving the central catch backwards.

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ
"Patrick" <billardpatrick@wanadoo.fr> wrote in message
news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
plate
> is Hansen Styling Parts.
> Photo attached.
> Regards
>
> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
> > how about a picture of it, and telling us who manufactured it !
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
> >> Hi,
> >> I received a hood lock which i ordered from a german "on line supplier"
> >> without any instruction (p/n 1521.21).
> >> I just can't figure out how to install this lock !
> >> I looked at every sides, up , down, all around and it still remains a
> >> mistery.
> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
> >> Thanks for your help.
> >> Patrick
> >>
> >>
> >
> >
>
>
>
>
>
>
>

 

I think i found how to install it .The point is to unscrew the lever from
the lock before sliding down the plate; drill four holes to hold the plate
then screw back the lever which then prevent moving the central catch
bacwards. What do you think ?
I'm not sure to be clear as my engineering skills are not better than my
english ;-))
Patrick
"Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
T88Ie.82090$G8.11255@text.news.blueyonder.co.uk...
>I can't see a good picture at Hansen Styling Parts, but if it works how I
> think it does, it has a hole top and bottom in the body, and a lever
> attached to the lock. You turn the lock so the lever is out of the way,
> slide the whole thing onto the bonnet ( hood in US parlance) central
> through
> the two holes and turn the lock to stop it falling off. The net effect is
> to
> prevent you from moving the central catch backwards.
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
> "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
>> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
> plate
>> is Hansen Styling Parts.
>> Photo attached.
>> Regards
>>
>> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
>> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
>> > how about a picture of it, and telling us who manufactured it !
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
>> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
>> >> Hi,
>> >> I received a hood lock which i ordered from a german "on line
>> >> supplier"
>> >> without any instruction (p/n 1521.21).
>> >> I just can't figure out how to install this lock !
>> >> I looked at every sides, up , down, all around and it still remains a
>> >> mistery.
>> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
>> >> Thanks for your help.
>> >> Patrick
>> >>
>> >>
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>
>

 

I think i found how to install it .The point is to unscrew the lever from
the lock before sliding down the plate; drill four holes to hold the plate
then screw back the lever which then prevent moving the central catch
bacwards. What do you think ?
I'm not sure to be clear as my engineering skills are not better than my
english ;-))
Patrick
"Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
T88Ie.82090$G8.11255@text.news.blueyonder.co.uk...
>I can't see a good picture at Hansen Styling Parts, but if it works how I
> think it does, it has a hole top and bottom in the body, and a lever
> attached to the lock. You turn the lock so the lever is out of the way,
> slide the whole thing onto the bonnet ( hood in US parlance) central
> through
> the two holes and turn the lock to stop it falling off. The net effect is
> to
> prevent you from moving the central catch backwards.
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
> "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
>> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
> plate
>> is Hansen Styling Parts.
>> Photo attached.
>> Regards
>>
>> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
>> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
>> > how about a picture of it, and telling us who manufactured it !
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
>> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
>> >> Hi,
>> >> I received a hood lock which i ordered from a german "on line
>> >> supplier"
>> >> without any instruction (p/n 1521.21).
>> >> I just can't figure out how to install this lock !
>> >> I looked at every sides, up , down, all around and it still remains a
>> >> mistery.
>> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
>> >> Thanks for your help.
>> >> Patrick
>> >>
>> >>
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>
>

 

I think i found how to install it .The point is to unscrew the lever from
the lock before sliding down the plate; drill four holes to hold the plate
then screw back the lever which then prevent moving the central catch
bacwards. What do you think ?
I'm not sure to be clear as my engineering skills are not better than my
english ;-))
Patrick
"Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
T88Ie.82090$G8.11255@text.news.blueyonder.co.uk...
>I can't see a good picture at Hansen Styling Parts, but if it works how I
> think it does, it has a hole top and bottom in the body, and a lever
> attached to the lock. You turn the lock so the lever is out of the way,
> slide the whole thing onto the bonnet ( hood in US parlance) central
> through
> the two holes and turn the lock to stop it falling off. The net effect is
> to
> prevent you from moving the central catch backwards.
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
> "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
>> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
> plate
>> is Hansen Styling Parts.
>> Photo attached.
>> Regards
>>
>> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
>> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
>> > how about a picture of it, and telling us who manufactured it !
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
>> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
>> >> Hi,
>> >> I received a hood lock which i ordered from a german "on line
>> >> supplier"
>> >> without any instruction (p/n 1521.21).
>> >> I just can't figure out how to install this lock !
>> >> I looked at every sides, up , down, all around and it still remains a
>> >> mistery.
>> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
>> >> Thanks for your help.
>> >> Patrick
>> >>
>> >>
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>
>

 

I think i found how to install it .The point is to unscrew the lever from
the lock before sliding down the plate; drill four holes to hold the plate
then screw back the lever which then prevent moving the central catch
bacwards. What do you think ?
I'm not sure to be clear as my engineering skills are not better than my
english ;-))
Patrick
"Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
T88Ie.82090$G8.11255@text.news.blueyonder.co.uk...
>I can't see a good picture at Hansen Styling Parts, but if it works how I
> think it does, it has a hole top and bottom in the body, and a lever
> attached to the lock. You turn the lock so the lever is out of the way,
> slide the whole thing onto the bonnet ( hood in US parlance) central
> through
> the two holes and turn the lock to stop it falling off. The net effect is
> to
> prevent you from moving the central catch backwards.
>
> Dave Milne, Scotland
> '91 Grand Wagoneer, '99 TJ
> "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
>> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
> plate
>> is Hansen Styling Parts.
>> Photo attached.
>> Regards
>>
>> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
>> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
>> > how about a picture of it, and telling us who manufactured it !
>> >
>> > Dave Milne, Scotland
>> > '91 Grand Wagoneer, '99 TJ
>> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
>> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
>> >> Hi,
>> >> I received a hood lock which i ordered from a german "on line
>> >> supplier"
>> >> without any instruction (p/n 1521.21).
>> >> I just can't figure out how to install this lock !
>> >> I looked at every sides, up , down, all around and it still remains a
>> >> mistery.
>> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
>> >> Thanks for your help.
>> >> Patrick
>> >>
>> >>
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>
>

 

Can you host some pictures of it ?

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"Patrick" <billardpatrick@wanadoo.fr> wrote in message
news:42f25e54$0$1253$8fcfb975@news.wanadoo.fr...
>
> I think i found how to install it .The point is to unscrew the lever from
> the lock before sliding down the plate; drill four holes to hold the plate
> then screw back the lever which then prevent moving the central catch
> bacwards. What do you think ?
> I'm not sure to be clear as my engineering skills are not better than my
> english ;-))
> Patrick
> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> T88Ie.82090$G8.11255@text.news.blueyonder.co.uk...
> >I can't see a good picture at Hansen Styling Parts, but if it works how I
> > think it does, it has a hole top and bottom in the body, and a lever
> > attached to the lock. You turn the lock so the lever is out of the way,
> > slide the whole thing onto the bonnet ( hood in US parlance) central
> > through
> > the two holes and turn the lock to stop it falling off. The net effect
is
> > to
> > prevent you from moving the central catch backwards.
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> > news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
> >> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
> > plate
> >> is Hansen Styling Parts.
> >> Photo attached.
> >> Regards
> >>
> >> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> >> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
> >> > how about a picture of it, and telling us who manufactured it !
> >> >
> >> > Dave Milne, Scotland
> >> > '91 Grand Wagoneer, '99 TJ
> >> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> >> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
> >> >> Hi,
> >> >> I received a hood lock which i ordered from a german "on line
> >> >> supplier"
> >> >> without any instruction (p/n 1521.21).
> >> >> I just can't figure out how to install this lock !
> >> >> I looked at every sides, up , down, all around and it still remains
a
> >> >> mistery.
> >> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
> >> >> Thanks for your help.
> >> >> Patrick
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
>
>
>
>

 

Can you host some pictures of it ?

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"Patrick" <billardpatrick@wanadoo.fr> wrote in message
news:42f25e54$0$1253$8fcfb975@news.wanadoo.fr...
>
> I think i found how to install it .The point is to unscrew the lever from
> the lock before sliding down the plate; drill four holes to hold the plate
> then screw back the lever which then prevent moving the central catch
> bacwards. What do you think ?
> I'm not sure to be clear as my engineering skills are not better than my
> english ;-))
> Patrick
> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> T88Ie.82090$G8.11255@text.news.blueyonder.co.uk...
> >I can't see a good picture at Hansen Styling Parts, but if it works how I
> > think it does, it has a hole top and bottom in the body, and a lever
> > attached to the lock. You turn the lock so the lever is out of the way,
> > slide the whole thing onto the bonnet ( hood in US parlance) central
> > through
> > the two holes and turn the lock to stop it falling off. The net effect
is
> > to
> > prevent you from moving the central catch backwards.
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> > news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
> >> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
> > plate
> >> is Hansen Styling Parts.
> >> Photo attached.
> >> Regards
> >>
> >> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> >> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
> >> > how about a picture of it, and telling us who manufactured it !
> >> >
> >> > Dave Milne, Scotland
> >> > '91 Grand Wagoneer, '99 TJ
> >> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> >> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
> >> >> Hi,
> >> >> I received a hood lock which i ordered from a german "on line
> >> >> supplier"
> >> >> without any instruction (p/n 1521.21).
> >> >> I just can't figure out how to install this lock !
> >> >> I looked at every sides, up , down, all around and it still remains
a
> >> >> mistery.
> >> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
> >> >> Thanks for your help.
> >> >> Patrick
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
>
>
>
>

 

Can you host some pictures of it ?

Dave Milne, Scotland
'91 Grand Wagoneer, '99 TJ

"Patrick" <billardpatrick@wanadoo.fr> wrote in message
news:42f25e54$0$1253$8fcfb975@news.wanadoo.fr...
>
> I think i found how to install it .The point is to unscrew the lever from
> the lock before sliding down the plate; drill four holes to hold the plate
> then screw back the lever which then prevent moving the central catch
> bacwards. What do you think ?
> I'm not sure to be clear as my engineering skills are not better than my
> english ;-))
> Patrick
> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> T88Ie.82090$G8.11255@text.news.blueyonder.co.uk...
> >I can't see a good picture at Hansen Styling Parts, but if it works how I
> > think it does, it has a hole top and bottom in the body, and a lever
> > attached to the lock. You turn the lock so the lever is out of the way,
> > slide the whole thing onto the bonnet ( hood in US parlance) central
> > through
> > the two holes and turn the lock to stop it falling off. The net effect
is
> > to
> > prevent you from moving the central catch backwards.
> >
> > Dave Milne, Scotland
> > '91 Grand Wagoneer, '99 TJ
> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> > news:42f1054f$0$3124$8fcfb975@news.wanadoo.fr...
> >> Supplier is ASP-ERBELE and manufacturer, according to the stamp on the
> > plate
> >> is Hansen Styling Parts.
> >> Photo attached.
> >> Regards
> >>
> >> "Dave Milne" <jeep@_nospam_milne.info> a écrit dans le message de news:
> >> OrOHe.81406$G8.33603@text.news.blueyonder.co.uk...
> >> > how about a picture of it, and telling us who manufactured it !
> >> >
> >> > Dave Milne, Scotland
> >> > '91 Grand Wagoneer, '99 TJ
> >> > "Patrick" <billardpatrick@wanadoo.fr> wrote in message
> >> > news:42efb150$0$22294$8fcfb975@news.wanadoo.fr...
> >> >> Hi,
> >> >> I received a hood lock which i ordered from a german "on line
> >> >> supplier"
> >> >> without any instruction (p/n 1521.21).
> >> >> I just can't figure out how to install this lock !
> >> >> I looked at every sides, up , down, all around and it still remains
a
> >> >> mistery.
> >> >> Can anyone mail me a drawing and/or instruction to fit the thing ?
> >> >> Thanks for your help.
> >> >> Patrick
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
>
>
>
>